Tender For Provision Of Pol Store At Afs Vadodara; 1 M&L Surface dressing n exc 15 cm deep complete all as specified and directed 2 Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m deep and getting out in loose/softsoil complete all as specified 3 Excavating in trenches n. exc 1.5 mtr wide & exc 1.5 mtr and not exc 3 mtr in depth for foundation etc and getting out in in loose/softsoil complete all as specified. 4 Returning , filling in, including spreading levelling, watering and well ramming in layers n.exc 25cm in soil complete all as specified 5 M & L Sand filling under floors or in foundation including watering and consolidation as in bedding layers for laying tiles complete all as specified. 6 Removing excavated materials n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting points in soil complete all as specified 7 M&L Hardcore of broken stone or boulder of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified. 8 M&L Moorum filling in floors or pavings, laid in layers n.exc 15 cm thick spread, levelled and blinded with earth and rammed including watering complete all as specified 9 M & L PCC 1:4:8 type D 2 using 40 mm .graded stoneaggregate in foundation complete all as specified 10 M & L PCC 1:3:6 type C1 using 20 mm graded stoneaggregate cement concrete in roof kerbs or mud stops, rounded or chamfered on edgescomplete all as specified 11 M&L RCC M-25 (Design Mix) using 20mm graded stoneaggregate asin foundation including raft footing, foundation beams, plinth beams, bases of columns etc complete all as specified 12 M&L RCCM-25 (Design Mix) using 20mm graded stoneaggregate as in columns complete all as specified 13 M&L RCCM-25 (Design Mix) using 20mm gradedstone aggregate as in beam, cantilevers, lintels etc and the like complete all as specified 14 M&L RCCM-25 (Design Mix) using 20mm gradedstone aggregate as in chajjascomplete all as specified 15 M&L RCCM-25 (Design Mix) using 20mm graded stoneaggregate as in slab supported on walls complete all as specified. 16 M&L Brick work in sub class B bricks straight or curve on plan exceeding 6 mtr mean radius built in CM1:4complete all as specified 17 M&L Use & waste of form work for rough finished flat surfaces to sides of concrete of foundation, footings, bases of columns and similar work vertical or to batter complete all as specified. 18 M&L Use & waste of form work for rough finished flat surfaces of concrete in chajja/shelves complete all as specified. 19 M&L Use & waste of form work for rough finished flat surfaces of concrete in beams, lintels including support etc complete all as specified. 20 M&L Use & waste of form work for rough finished flat surfaces of concrete to sides of pillars post, struts piers, columns and stanchions etc complete all as specified.. 21 M&L Use & waste of form work for edges of concrete flats, treads, breaks floors, window cills, opening in concrete walls, floor, roofs, n exc 20cm wide and side of RCC, PCC bands in walls horizontal or sloping and similar works exc 10cm but nexc 20cm wide complete all as specified.. 22 M&L Mild steel 0.63 mm thick plain black sheet in wall cladding, steel gates and similar work cut to size holes punched including round headed screws clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joint with riveted or welded seams including bending or turning up mitred angles etc as required complete all as specified. 23 M&L TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns,hooping ends and binding with and including mild steel wire annealed, not less than 0.9mm dia complete all as specified 24 M&L TMT bars 6mm to 8 mm dia and over cut to length bent to shape required includingcranking, bending spirally for hoping for columns, hooping ends and binding with and including mild steel wire annealed, not less than 0.9mm dia complete all as specified 25 M&L TMT bars5mm dia and over up to and including 10mm dia in stirrups, spacers and binders binding with and including mild steel wire annealed, not less than 0.9mm dia complete all as specified complete all as specified 26 M&LFramed work Fe 410-W (Grade - E-250) as in door or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings complete all as specified. 27 M&L Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with over and including 10mm thick screed bed in CM 1:4 completeall as specified 28 M&LMachine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishingover and including 10mm thick screed bed in CM 1:4 complete all as specified 29 M&L 75 mm thick cement concrete type B2 1:2:4 ( 40 mm graded stoneaggregate) in floors etc complete all as specified 30 M&L 75 mm thick PCC 1:3:6 type C-2 using 40mm gradedstone aggregates as in plinth protection , finished surfaces even and smooth without using extra cement, complete all as specified 31 M&L 75mm thick PCC 1:4:8, type D-2 using 40mm gradedstone aggregates as in sub base for pavement, path, floor etc complete all as specified. 32 M&L25mm thick cement concrete type B0 1:2:4 using 12.5mm graded stone aggregate in floors complete all as specified 33 M&L Applying cold bituminous primer @ 0.30 Ltr/sqm conforming to IS 3384 and laying APP polymer modified fibre glass reinforced membrane 3mm thick 3.5Kg/sqm (modified bituminous water proofing membrane) with plain finish with polyester base reinforcement sealing all the over laps of 75 mm in length side and 100 mm on the width side of membrane by torching the same all as per manufacturer instruction including one coat of bituminousaluminium paint @ 0.10 Ltr/sqm over membranecomplete all as specified. 34 M&L 0.63mm thickMild steelplain black sheet in wall cladding, steel gates and similar work cut to size holes punched including round headed screws clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joint with riveted or welded seams including bending or turning up mitred angles etc complete all as specified 35 M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with gray cement and no pigment (as in road berm), complete all as specified 36 M&L 10 mm thick rendering on fair faces of concrete surfaces in CM 1:6 and finished even and smooth without using extra cement complete all as specified 37 M&L 10 mm thick rendering on fair faces of concrete surfaces in CM 1:4 as backing coat for tiles on vertical surfaces without using extra cement complete all as specified 38 M&L5 mm thick rendering in CM 1:3 mixed with water proofing compound @ 3% by weight of cement on ceiling complete all as specified 39 M&L Rendering 15mm thick in two layers, first coat 10mm thick in CM 1:4 and second coat 5mm thick in CM 1:4 mixed with water proofing compound @ 3% by weight of cement on concrete block masonry surfaces finished even and smooth without using extra cement as specified. 40 M&L Screed bed or bedding layer of cement mortar 1:6, 15mm thick for laying floor finished complete all as specified 41 M&L Screed bed or bedding layer of cement mortar 1:4, 15mm thickfor laying floor mixed with water proofing compound @ 3% by weight of cement on concrete block masonry surfaces finished even and smooth without using extra cement complete all as specified 42 M&L Preparing new surfaces plastered or un plastered & applying three coats of white wash on undecorated wall surfaces and ceiling surface complete all as specified 43 M&L Preparation of new plastered surfaces of wallapplyingtwo coats of oil bound distemperoverone coat of alkali resistant paint & including 1mm thick wall careputty on wall completedall as specified 44 M&L Preparation of new plastered surfacesandapplying two coats of cement based paint over acoat of primer with alkali resistant priming coat complete all as specified 45 M&L Preparation of new plastered surfaces on wall/concrete surfaces and apply two coats of cement base paint camouflage pattern as approved by GE up to 4 floor high complete all as specified 46 M&L Preparing new or previously untreated steel surfaces and applying two coats of synthetic enamel paint over coat of red oxide primer complete all as specified 47 M & L Point wiring with FRLS copper conductor cables in ERW pipe of 16 SWG with accessories, joint boxes/ terminal boxes 60mm deep with 3 mm thick plastic laminated sheet cover for mounting or housing switches and continuous earthing and earthing connections for one light controlled by one switch with FRLS single core sheathed multistrand copper cables 1.5 sq.mm size including earth wire complete all as specified and directed. 48 M & L Point wiring with FRLS copper conductor cables in ERW pipe of 16 SWG with accessories, joint boxes/ terminal boxes 60mm deep with 3 mm thick plastic laminated sheet cover for mounting or housing switches and continuous earthing and earthing connections for one fan point controlled by one one/way switch with FRLS single core sheathed multistrand copper cables 1.5 sq.mm size including earth wire complete all as specified and directed.. 49 S&F Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed. 50 S&F LED 20 watt tube light flameproof type FLP-WP made of aluminium alloy LM6, with electronic ballast, bipin holders, connector block, etc. complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size 4 feet complete all as specified and directed. 51 S&F LED 30 watt bulk head fixture 30wattt flameproof type FLP-WP made of aluminium alloy LM6, connector block, etc. complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size 4 feet complete all as specified. 52 S&F LM6 Flame proof exhaust fan of size 300mm with louvers including cutting of chases with louver complete all as specified 53 S&FFlame proof weather proof sheet metal enclosures single door MCB DB SPN 4 way in cast aluminium alloy LM6 construction comprising of following:-(a).MCB FLP/WP SPN 25 Amps 10KA, 240V-1 No(b).MCB FLP/WP SP 10 Amp 10 KA, 240 V- 2 NosMake CAT Part No : SSPL/CS/174 OF Shyam or equivalent 54 M&L Earthing complete as per electrical plate No.3 of MES SSR Part I with galvanised steel plate earth electrode 600 mm x 600mm x 6 mm burried directly in ground in a pit of depth not less than 2.25 metre below ground level with the top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to and inclu galvanised iron or steel earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel earthing wire protected by galvanised iron or steel pipe 15 mm dia light grade and connected to main switch board or main control board watering pipe shall be 20 mm dia GI medium gradeincluding excavation and earth work in any type of soil, PCC pit, CI Frame, RCC covers complete all as specified 55 M & L Sand cushioning to undergroundcables with sand completeall as specified in clause 19.75 of SSR Part-1 56 Supply and laying un-reinforced precast concrete cable cover, class LV, type 1 size 250mm x 150mm x 40mm. 57 Supply and laying & testing10 sqmm 2 core XLPE cable PVC insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable , (heavy duty), 1100 volts grade with stranded aluminium conductor complete all as specified and directed 58 S & F GI Pipe line 50 mm bore light grade with all fittings, fixing on wall included supporting clamp / laid in trenchesfor cable protection complete all as specified
