|
| 1 | Supply, Fabrication, sand blasting and Zinc coating of RS Joists (200x100 & 100x125)mm, 12mm Base Plate including cost of all materials, labour, lead, lift etc., complete as directed by the Department Engineer at site |
| 2 | Supply, Fabrication, sand blasting & Zinc painting (125x65/100x65) and MS channel, MS angles of various sizes including cost of all materials, labour, lead, lift etc., complete as directed by the Department Engineer at site |
| 3 | Supply, Transport, loading and unloading of MS Plates (65x10mm thick) for earth mat MS (50x8mm thick) for earth raisers to site including the cost of all materials, transport, labour, lead, lift etc., complete as directed by the Department Engineer at site |
| 4 | Supply and fabrication of earth electrodes 6.00mtr length with 40mm MS rod including transport and other charges and erection of earth spikes, including cost of MS rod 40mm, transport, labour, lead, lift etc., complete as directed by the Department Engineer at site |
| 5 | Labour charges for erection of Heavy Section structures (Sectional weight 14 Kg/m and above) including cost of all labour, lead, lift etc., complete as directed by the Department Engineer at site |
| 6 | Labour charges for erection of Light Section structures (Sectional weight 14 Kg/m and below) including cost of all labour, lead, lift etc., complete as directed by the Department Engineer at site |
| 7 | Labour charges for erection of SF6 Circuit Breaker 110 KV with own crane arrangements and connecting link rod, SF6 Gas filling and other consumables and as directed by the Department Engineer |
| 8 | Labour charges for erection of VCB 11 KV or 33 KV with own crane arrangements and connecting link rod, SF6 Gas filling and other consumables and as directed by the Department Engineer |
| 9 | Labour charges for erection of 110 KV CT/PT (One single Phase uint) with own crane arrangements including providing holes wherever required, fixing junction box and other sonsumables and as directed by the field Engineer |
| 10 | Labour charges for erection of 33/22/11 KV CT, PT,NCT, Reactor, auto recloser using manual labour one single phase, three unit) including providing holes wherever necessary, fixing junction box and other consumables and as directed by the field Engineer |
| 11 | Labour charges for erection and alignment of AB switches without earth hand operated-110 KV (Under Normal condition) including the cost of lubricant, consumables and wiring (If necessary)checking of operation by both manual and elecytrical (If necessary) including the cost of all materials, labour, lead, lift etc., complete as per standard specification |
| 12 | Labour charges for erection and alignment of AB switches without earth hand operated-33/11 KV (Under Normal Condition) including the cost of lubricant, consumables and wiring (If necessary)checking of operation by both manual and elecytrical (If necessary) including the cost of all materials, labour, lead, lift etc., complete as per standard specification |
| 13 | Labour charges for erection and alignment of AB switches without earth hand operated-33/11 KV (Under LC condition) including the cost of lubricant, consumables and wiring (If necessary)checking of operation by both manual and elecytrical (If necessary) including the cost of all materials, labour, lead, lift etc., complete as per standard specification |
| 14 | Labour charges for erection of 110/11 KV Station type single pole stack LAS including the cost of all materials,, labour, lead, etc., complete as directed by the Department Engineer at site |
| 15 | Labour charges for erection of 33/11 KV Station type single pole stack LAS including the cost of all materials,, labour, lead, etc., complete as directed by the Department Engineer at site |
| 16 | Labour charges for erection of 110 KV Single Pole stack upright or under hang suspension including the cost of all materials, labour, lead, lift etc., complete (Under Normal Condition) |
| 17 | Labour charges for erection of 110 KV Single Pole stack upright or under hang suspension including the cost of all materials, labour, lead, lift etc., complete (Under LC Condition) |
| 18 | Labour charges for erection of 33/11 KV Single Pole stack upright or under hang suspension including the cost of all materials, labour, lead, lift etc., complete |
| 19 | Labour charges for erection of strung bus 110 KV single zebra conductor (1 span 3 runs) (Under LC condition) including the hoisting of insulators |
| 20 | Labour charges for erection of strung bus 33/11 KV single zebra conductor (1 span 3 runs) (Under Normal condition) including the hoisting of insulators |
| 21 | Labour charges for erection of strung bus 33/11 KV single zebra conductor (1 span 3 runs) (Under LC condition) including the hoisting of insulators |
| 22 | Labour charges for erection of 75 mm IPS Aluminium Tube Bus bar arrangements with making required bends including fabrication and any modification of end clamp wherever necessary and the cost of all labour, lead, lift etc., complete as directed by the Department Engineer at site |
| 23 | Labour charges for erection of 75 mm IPS Aluminium Tube Bus bar arrangements without making required bends including fabrication and any modification of end clamp wherever necessary and the cost of all labour, lead, lift etc., complete as directed by the Department Engineer at site |
| 24 | Labour charges for erection of 50 mm IPS Aluminium Tube Bus bar arrangements without making required bends including fabrication and any modification of end clamp wherever necessary and the cost of all labour, lead, lift etc., complete as directed by the Department Engineer at site |
| 25 | Labour for providing Jumpers and droppers (Under Normal condition) |
| 26 | Labour for providing Jumpers and droppers (Under LC condition) |
| 27 | Labour, machineries, consumables for fabrication of earth electrode 10 mtr/6mtr length or required length for yard including the cost of all materials, labour, lead, lift etc., complete as directed by the Department Engineer at site |
| 28 | Labour, machineries, consumables for fabrication of earth spike of including the cost of all labour, lead, lift etc., complete as directed by the Department Engineer at site |
| 29 | Labour machnieries, consumables for erection of Earth mat and earth rasier including the cost of labour, lead, lift etc., complete as directed by the Department Engineer |
| 30 | Providing 140/150mm dia bore including the all type of soil and erection of earth electrode, supply and providing of A4 grade benotine Powder with 5% common salt with available site clay soil 5 kg per metre depth in earth bore incluing the cost of all labour, lead, lift etc., complete as directed by the Engineer at site |
| 31 | Labour for erection of Simplex Indoor/Outdoor Panel battery chargers as directed by the Engineer at site |
| 32 | Labour for laying of cable in duct/Trench upto 8 core including the cost ofAluminium Tag for identification including the cost of all labour, lead, lift etc., complete as directed by the field Engineer at site |
| 33 | Labour for laying of cable in duct/Trench above 8 core including the cost ofAluminium Tag for identification including the cost of all labour, lead, lift etc., complete as directed by the field Engineer at site |
| 34 | Labour for excavation and refilling of trench of average depth of 0.80m for earth mat and 0.40m for laying of cable below fixed yard level and any size as required field Engineer |
| 35 | Labour for loading and unloading or shifting of Non-Fragile materials with board crane (One Operation) |
| 36 | Labour for loading and unloading or shifting of Fragile materials with board crane (One Operation) |
| 37 | Labour charges for painting earth raisers by green enamel paint (Duplex, Asian Berger preferred) wherever required including removal of dust, rust using wire brush and painting brush etc., including the cost of labour, lead, lift complete as directed by the Deoartment Engineer at site |
| 38 | Hire charges for crane provided (12 Tonne) for any erection or loading and unloading or shifting of equipments done by the department Engineer at site |
| 39 | Manufacturing and supply of bolt of required length out of 18-20mm dia GI round including the cost of GI round and 2 Nos. GI nuts as directed by the Field Engineer at site including the cost of all transport, labour, lead, lift etc., complete. Eye Bolt/Grout Bolt |
| 40 | Supply and provision of M8, M9, M10, M12 and M16 full threaded GI bolt and Nuts and washers GI various sizes for erection of AB switches and Insulators and any other purpose wherever required and as directed by the Field Engineer at site |
| 41 | Fabrication, Supply and fixing of equipment board of various size of 750x450mm out of 14 SWG (2mm) and Fire stand and etc as per Drawing and as directed by the Field Engineer including the cost of all materials labour, lead, lift etc., complete |
| 42 | Manufacturing and supply of Fire Bucket of 10 Lit capacity made out of 26 SWG (0.46 MM) MS Sheet painted with white and red enamel paint inside and outside respectively bottom of bucket shall be \"U\" Shapped outside of side of the Bucket shall be written as Fire in English/Tamil in white enamel paint including the cost of all labour, lead, lift etc., complete as directed by the Department Engineer at site |
| 43 | Fabrication, Supply and fitting of CT/PT Junction Box out of 14 SWG (2.00mm) MS sheet wherever required as directed by the field Engineer. The box shall beVenim proofm shall have sturdy hinges provision for mounting terminals blcoks and locking arrangements including the cost of all materials. 400Wx150Dx300H |
| 44 | Manufacturing and supply of Yard light box of size 200x175Hx150D mm out of 18 SWG (1.2mm) MS sheet with cable entry holes, fixing arrangements for fuse units and mounting clamp as directed by the Field Engineer at site |
| 45 | Labour charges for removing rust primer coat first and second coat painting both sides and writing details in MS board, RS Joists, Yard light poles etc., including the cost of enamel paint (Dulex, Asian Berger [referred) and other consumables as directed by the Field Engineer at site |
| 46 | Supply and erection of LED lamp 72W fitting with fixture and fuse box including wiring and testing for burning condition including the cost of 15 Amps 2 way strip connector and other consumables |
| 47 | Labour for writing details in finished surface boards including the cost of enamel paint (Dulex, Asian Berger preferred) and other consumables as directed by the Field Engineer |
| 48 | Supply and erection of \"B\" Class GI Pipe 40mm dia for extension of tandum/down pipe for AB switches and for any other work as rquired and as directed by the Field Engineer |
| 49 | Supply and fixing of mounting channel, suitable for CBTM5 Terminal Block in Panel/box and as rquired and irected by the Field Engineer |
| 50 | Supply and fixing of Nut type terminal blocks suitable for CT circuits in Panel/box as required as required and directed by the Engineer at site |
| 51 | Supply and fixing of Disconnected type terminal blocks suitable for CT circuits in Panel/box as required abd as directed by the Field Engineer |
| 52 | Supply and glanding of 19MM ISI make cable gland of reputed make including removing insulation of cable and providing suitable holes as directed by the field Engineer |
| 53 | Supply and glanding of 25MM ISI make cable gland of reputed make including removing insulation of cable and providing suitable holes as directed by the field Engineer |
| 54 | Supply and glanding of 28MM ISI make cable gland of reputed make including removing insulation of cable and providing suitable holes as directed by the field Engineer |
| 55 | Supply and glanding of 32MM ISI make cable gland of reputed make including removing insulation of cable and providing suitable holes as directed by the field Engineer |
| 56 | Supply and termination of cable core end including the cost of cable socket (Lugs) ferrules strapes etc., as per cable schedule and as directed by the field Engineer |
| 57 | Supply and fixing of Godrej 6 lever Navtol Lock with triplicate keys for AB switches and for any other purpose including the cost of ring and key toekn as directed by the field Engineer |
| 58 | Supply and providing of 600mm mean dia, 300mm height, 36mm thick cement colllar for identification of earth electrode location including 1 primer and 2 coats of colour wash as directed by the Field Engineer |
| 59 | Manufacuting and supply of sand drum made out of oil drum size 580mm dia and 420mm height chonical cover made of tin shet providing with handle including the cost of barrel, sand and consumables as directed by the Department Engineer |
| 60 | Supply and fixing of Flexible copper tape/rope for interlinking panel earthing and for any other purpose as directed by the field Engineer |
| 61 | Fabrication and fixing of bell mouth provding jumper connection in the soild core insulators/PT Insulators including cost of GI pipe 50mm dia one meter and other consumables and as directed by the field Engineer at site |
| 62 | Supply and fixing of single pole 16A MCBs in panel/Boxes of eputed make as directed by the field Engineer |
| 63 | Supply and fixing of single pole 32A MCBs in panel/Boxes of eputed make as directed by the field Engineer |
| 64 | Supply and erection of GI steel Tubular pole for street light 8 metre length single bracket pole with base plate (250x250x6mm) 114.30mm OD x 5.40mm thickness x 4500mm Length, 88.90m OD x 4.85mm Thickx1750mm Length, 76.10mm ODx3.25mm Thickx1750mm Length |
| 65 | Supply and fixing of 6 bolt tension fitting for Zebra |
| 66 | Supply and fixing of 4 bolt tension fitting for Zebra |
| 67 | Supply and fixing of Switch end for Zebra |
| 68 | Supply and fixing of T clamp for 75mm Bus to Zebra |
| 69 | Supply and fixing of \"T\" clamp for Zebra to Zebra |
| 70 | Supply and fixing of Switch end clamp for 75mm Bus |
| 71 | Supply and fixing of seating block of 75mm Bus |
| 72 | Supply and fixing of free end clamp for 75mm Bus |
| 73 | Supply and fixing of 75mm Corona Bell |
| 74 | Supply and fixing of switch end clamp for 50mm Bus |
| 75 | Supply and fixing of \"T\" Clamp for 50mm bus to Zebra |
| 76 | Supply and fixing of free end clamp for 50mm Bus |
| 77 | Supply and fixing of seating block of 50mm Bus |
| 78 | Supply and fixing of 50mm Corona Bell |
| 79 | Supply and fixing of Reducer clamp for 75mm Bus to Zebra |
| 80 | Transport charges (Materials transport from Store to site, various location to site) |
| 81 | GST for bidders within Tamilnadu |
| 82 | SGST |
| 83 | CGST |
| 84 | GST for bidders outside TamilNadu (IGST) |
