|
| 1 | Material and labour for 15mm bore steel tubing medium grade,galvanised fitting fixed complete to walls and ceiling or floor complete all asspecified and directed. |
| 2 | Material and labour for 20mm bore steel tubing medium grade,galvanised fitting fixed complete to walls and ceiling or floor complete all asspecified and directed. |
| 3 | Cutting chases in brick masonry walls built in cement mortor for concealed water tubing or concealed conduit wiring, etc., and making good in CM 1:3, cutting not exc 10 cm girth etc complete all as specified as directed. |
| 4 | Material and labour for 50 mm dia high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixedto walls, ceilings or in floors etc complete all as specified as directed. |
| 5 | Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed. |
| 6 | Material and labour for rendering 10mm thick on brick or concrete surfaces in cement mortar (1:4) complete all as specified and directed. |
| 7 | Material and labour for glazed ceramic tiles in vertical surfacee300x450x 7mm thick, coloured tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match on walls complete all as specified and directed. |
| 8 | Supply and fix stainless steel sink with drainage board made of 1mm thick stainless steel sheet for kitchen with plugs, washers, waste coupling and pipe, cast iron cantilever brackets and connecting union to pipe overall size 915 mm x 460 X178 mm bowl size 405 mm x 355 mm complete all as specified and directed. |
| 9 | Supply and fixstainless steel kitchen rackmade of 0.85 mm thick, stainless steel sheetof size 786 mm x 914 mm x 254 mm fixed to wall with screws complete all as specified and as directed. |
| 10 | Supply & fixedvitreous china white wash hand basin flat back of size 515x400mm cutting for and pinning ends of brackents including waste coupling and brackets (excl flush pipe) complete all as specified and as directed. |
| 11 | Supply and fix600mmx450mm beveled edge mirror of selected quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed |
| 12 | Supply and fixof PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed. |
| 13 | Supply and fix stop valves/ angular stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and directed. |
| 14 | Supply and fix15 mm bore pillar taps,long body cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered \"HOT\" or \"COLD\" with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed. |
| 15 | Supply and fixbib taps, 15mm dia cast copper alloy, chromium plated, fancy type with crutch or butter- fly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed. |
| 16 | Supply and fix for 32 mm PVC waste pipe for wash hand basin/sink complete all as specified and as directed. |
| 17 | Supply and fix 25mm dia stainless steel curtain rod, chrome finish with and including SS bracket ,fixing stops,rollers etc complete all as specified and directed. |
| 18 | Supply and fix stainless steel side domes fancy type for 25 mm dia curtain rod complete all as specified and directed. |
| 19 | Surface excavation n.exc 30cm deep averaging 15.00cm deep and getting out in soft/loose soil. |
| 20 | Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation or for shafts, wells cesspits,man holes etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed. |
| 21 | Returning filling in including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and directed. |
| 22 | Removal of surplus excavated soil to a distance exc 250m but nexc 500m and depositing as directed at a level n exc 1.5m from the starting point complete all as specified and directed. |
| 23 | Material and labour for hardcore of gauge n exc. 63mm with brokenstone or boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.complete all as specified and directed. |
| 24 | Material and labour for plain cement concrete 1:3:6 type C2, (using 40 mm grade stone aggregate) as infoundation, filling and mass concrete etc. complete all as specified and as directed. |
| 25 | Material and labour for plain cement concrete 1:4:8, type D2, (using 40 mm grade stone aggregate) as in sub base foundation, filling and mass concrete etc. complete all as specified and as directed. |
| 26 | Material and labour for RCC 1:1½:3 type A1(20mm graded stone aggregate) nominal mix as in Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under-reamed piles and mass concrete etc complete all as directed. |
| 27 | Material and labour for RCC1:1.5:3 type A1(20mm graded stone aggregate) nominal mix as in Slabs supported on walls beams and columns in floors,roofs,landings, balconies,canopies,deck slabs and in shelves and the like etc complete all as specified as directed. |
| 28 | Material and labour for RCC, 1:1.5:3, type A-1 (using 20 mm graded stone aggregate) as in beams, seismic bands, cantilevers, bressumers and lintels over 1.5 m span complete all as specified and as directed. |
| 29 | Material and labour for RCC 1:1.5:3, type A-1 (using 20 mm graded stone aggregate)as in columns, pillar, piers, posts and struts etc. complete all as specified and as directed. |
| 30 | Material and labour forcement concrete type D-2, 1:4:8(40mm graded aggregate) 75mm thick as in sub base complete all as specified and as directed. |
| 31 | Material and labour for 25 mm thick PCC (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) as in floorcomplete all as specified and as directed. |
| 32 | Material and labour for 100mm thick PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in sub base for path/paving/hard standing/floor etc. complete all as specified and as directed. |
| 33 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed. |
| 34 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; n. exc 200m thick (Horizontal or sloping) complete all as specified and as directed. |
| 35 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. |
| 36 | Formwork to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified and as directed. |
| 37 | Material and labour for brick work with old size sub class \"B\" bricks straight or curved on plan exc. 6m mean radius and built in CM 1:6 etc complete all as specified and as directed. |
| 38 | Material and labourfor 10 mm thick rendering in CM 1:6 on brick/ concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 39 | Material and labour for 15mm thick rendering externally on brick or concrete surfaces in CM 1:4 mixed with liquid WPC @ 3% by weight of cement or as per manufacturer instructions finished even and smooth without using extra cement complete all as specified and directed.. |
| 40 | Material and labour for 5mm thick rendering in CM 1:3 on concrete surfaces in ceiling finished even and smooth without using extra cement complete all as specified and directed. |
| 41 | Supply only integral water proofing compound of approved make |
| 42 | Material and labour for mild steel TMT bars 10 mm dia and over cut to length, bent to shape as required including cutting, bending cranking, hooking end and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and as directed |
| 43 | Material and labour for mild steel TMT bars 5 mm dia and over upto and including 10mm diacut to length, bent to shape required including cutting, cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia as in stirrups, spacers and binders complete all as specified and as directed. |
| 44 | Material and labour for 1.25mm thick mild steel pressed steel frames of size 105x60mm for doors, single rebates incl necessary fixing lugs, (03 Nos for each shutter), lock strike plate, filling the hollow portions of steel frame with PCC 1:3:6 type C-0 (12.5 graded stone aggregate)etc. complete all as directed. |
| 45 | Supply and fix 30 mm thick flush shutter, solid core construction with particle board core and plywood face panel, commercial type on both side complete all as specified and as directed. |
| 46 | Supply and fix 150 mm size aluminum anodised, barrel tower bolts of extruded section etc complete all as specified and as directed. |
| 47 | Supply and fix aluminum alloy anodised, sliding door bolts with hasp and staple, (bolt type) and fixing clips of sheets, cast or extruded section and fixing boltand sliding bolts of extruded section or cast aluminium alloy and fixed 300mm long etc complete all as specified and directed. |
| 48 | Supply and fixing aluminum (extruded section) body door closer hydraulically regulated designation No 3, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 49 | Supply and fix 150 mm long extruded anodized aluminum alloy handles, fabricated type,etc complete all as specified and as directed. |
| 50 | Anodized aluminium powder coated sliding glazed window shutter (double leaf glazed shutter and single leaf mosquito proof shutter each in single frame work) without sash bars with anodized aluminium shutter of section 40.00mmx20.00mmx2mm thick and window chowkat of section 92.00mmx29.50mmx2mm thick including necessary jointing cleats, glazing clips, rubber packing, snap beading, screws, handle, tower bolts and locking arrangement etc. and including 4mm thick sheet glass, tinted quality on panel and stainless steel wirecloth or aluminium anodized wire cloth for mosquito proofing, 0.45mm nominal dia and average width of aperture 1.40mm fixed with aluminium screws and tacks and making good to disturbed surfaces complete all as specified and as directed. |
| 51 | Material and labour for colourednon-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, laid in floors etc.over and including 15 mm thick screed bedin cement motar 1:6, setand jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles,complete all as specified and as directed. |
| 52 | All as per item No. 51 above but in vertical surfaces such as skirting and dado, laid over and including 10 mm thick rendering in CM 1:4.omplete all as specified and as directed. |
| 53 | Material and labour for pre-polished chequered cement concrete tiles of size 300mm x 300mm x 25mm thick made of grey cement with pigment, laid over and including 15mm thick CM 1:6 bedding,set and jointed in neat cement slurry and pointed in coloured cement to match etc omplete all as specified and as directed. |
| 54 | Material and labour for preparation of newly plastered surfaces of wall and applying two coats of acrylic distemper over a coat ofprimer including 3mm thick wall care putty complete all as specified and as directed. |
| 55 | Material and labour for preparation of newly plastered surfaces of wall applyingtwo coats of cement base paint over a coat ofprimer complete all as specified and as directed. |
| 56 | Material and labour for preparation of newly plastered surface and applying three coats of white wash on ceiling etc complete all as directed |
| 57 | Material and labour for preparation of new wood surfaces exc 10 cm width/girth and applying two coats of synthethic enamel paint over a coat of primer etc complete all as specified and directed. |
| 58 | Material and labour for preparation of new steel surfacesexc 10 cm width/girth and applying two coats of synthethic enamel paint over a coat of primer etc complete all as directed. |
| 59 | Supply only bitumen primer for use in waterproofing treatment over roof slab @ 0.25 Ltr per sqm |
| 60 | Material and labour APP based polymeric membrane min 4mm thick reinforced with polyster non wove fabric land on primed surface by torch application method all as specified. |
| 61 | Supply and fix Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc confirming to Fe 410-W (Gde E-250)complete all as specified and as directed |
| 62 | Supply and fix 20mm bore, gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or for union complete all as specified and directed. |
| 63 | Material and labour for Cutting existing steel tubing 40 mm dia for alterations or additions (Each cut measured ) complete all as specified and as directed. |
| 64 | Supply and fix rolled Mild steel sections of Fe-410-W(Gde-E-250) quality-B as in rooftrusses (framed) trussed,purlins, rafters, posts, crane gantries, rails and fastening of eaves board or weather board and heavy bracket framing (beam,tee, anfle, channel, MS pipe or flat sections) including distance pieces cleats etc complete all as specified and as directed. |
| 65 | Supply and fix pre painted galvalume aluminum and zinc alloy coating with steel based corrugated steel sheet 0.50 mm thick of approved colour approved by GE having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 66 | Supply and fix pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of colour as approved by GE having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 67 | Supply and fix PVC (SWR) pipe 110 mm bore single socketed in any length with rubber ring joints laid in trenches or in floor complete as specified complete all as specified. |
| 68 | Material and labour for point wiring with 1.5 sqmm, single core, PVC insulated and PVC unsheathedFRLS cable, 1100 volts grade IS-694marked, with multistranded copper conductors and earthcontinuity wire with 1.5 Sqmm copper conductor cable (including connecting to earth dolly)laid/fixed with and including PVC rigid conduit on walls/ceiling ( concealed),with MS/PVC terminal boxes fixed flush with wall surface with 3mm thick masonite laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulators etc. including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly for one light or fan point controlled by one 5 Amp switch one way complete all as specified and as directed. |
| 69 | Allas per item serial No 68 here-in-before butfor One 3 pin 5 Amp switch socket outlet on same board with other switches. |
| 70 | Allas per item serial No 68 here-in-before butfor One 3 pin 5 Amp switch socket outlet on independent board. |
| 71 | All as per item serial No 68 here-in-before but with 2.5 Sqmm single core multistranded copper conductor cableand earthcontinuity wire with 2.5 Sqmm cable for 6 pin 15 Amp socket outlet on independent board. |
| 72 | Supply and fixswitch piano, flush type single pole one way 5 Amps 230 volt complete all as specified and as directed. |
| 73 | Supply and fix socket outlet 3 pin, 2-in-1, 5 Amps, flush typecomplete all as specified and as directed. |
| 74 | Supply and fixswitch socket combination outlet 5 pin, 2-in-1, 5 Amp flush type complete all as specified and as directed. |
| 75 | Supply and fixswitch socket combination, multipurpose, 2 in 1, 6 pin, 5 & 15 Amp flush type complete all as specified and as directed. |
| 76 | Supply and fix ceiling rose surface bakelite, 65x50mm three terminal complete all as specified and as directed. |
| 77 | Supply and fix lamp holder, insulated, PVC / polycarbonate /bakelite body complete all as specified and as directed. |
| 78 | Supply and fix LED light fitting mirror type with high out put difffuser 2 feet, 10 Watt 220 V AC with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.. |
| 79 | Supply and fix LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. |
| 80 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative batten type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete |
| 81 | Supply and fix factory made, sheet steel distribnution boards, double door, protection class IP-42, SPN 8 Ways suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amp rating copper bus bar, complete all as directed. |
| 82 | Supply and fix MCB TPN 40 to 63 Amps in accordance with IS/IEC 60898-1, 415 V, 50 Hz,10 kA,C-series rupturing capacity providing in DB complete all as specified. |
| 83 | Supply and fix MCBs, SP 6 to 32 Amps, 10 KA, \"C\" curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed. |
| 84 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep 1400 RPM with, blades, and frame and louvers complete all as specified and as directed. |
| 85 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 86 | Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed |
| 87 | Supply and fixing LED building secruity light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete |
| 88 | Material and labour forbuilding secruity light bracket made out of 40 mm bore medium grade GI Pipe with two sets clamps, with nuts and bolts, bend to shape for fixing street light luminaries all as directed, length of GI Pipe shall not be less than 2.0 mtrs complete all as specified and directed. |
| 89 | Material and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 16 sqmm 4 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed. |
| 90 | Supply and spreading clean dry river sand in cable trenches as in cable cushioning complete all as specified and as directed. (Note: Punnedthickness shall be measured and paid) |
| 91 | Material and labour for Sub class ‘B’ old size well burnt brick laid flat in trenches over the cable forprotection of LT cable complete all as specified and as directed. |
| 92 | Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm burieddirectly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 4 mm upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etcRCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate)including earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 . |
