Bids Are Invited For 9B861031-Vi Axis Raw Material Will Be Issued By Bdl At Free Of Cost And Have To Be Collected From Stores. On Submission Of Ib Bond For The Value Of Rs.1,00,000/- Technical Specifications And Requirements And Supply Condition As Per , Medak-Telangana

Bids Are Invited For 9B861031-Vi Axis RAW MATERIAL WILL BE ISSUED BY BDL AT FREE OF COST AND HAVE TO BE COLLECTED FROM STORES. ON SUBMISSION OF IB BOND FOR THE VALUE OF Rs.1,00,000/- TECHNICAL SPECIFICATIONS AND REQUIREMENTS AND SUPPLY CONDITION AS PER DRAWING AND PROCESS SHEETS. HEAT TREATMENT PROCESS, ELECTRO PLATING AND TINNING OPERATIONS ARE IN VENDOR SCOPE SUPPLIES ARE TO BE SUBMITTED TO BDL WITH INSPECTION REPORTS CONSISTING OF A. DIMENSIONAL INSPECTION (100% FOR FUNCTIONAL DIMENSIONS) B. HARDNESS TEST RESULT AND MECHANICAL PROPERTIES TEST REPORT WHEREVER APPLICABLE AS PER DATA SHEET/DESIGN DRAWING. C. VACCUM HEAT TREATMENT AND SUB ZERO TREATMENT RECORDS. D. PLATING RECORDS WHEREVER APPLICABLE. ALL REQUIRED FIXTURES/GAUGES/TOOLS etc IN VENDOR SCOPE. RAW MATERIAL CONSUMPTION DETAILS: SL.NO 1. DES/ MATERIAL CODE CONSUMPTION PER/100NOS SS AISI304 Dia 5mm/90020566005010 0.22kg PACKING SHOULD BE DONE WITH OIL PAPER/ BUTTER PAPER. REJECTION ALLOWANCE IS MAXIMUM UPTO 5%. BDL OR ITS REPRESENTATIVES RESERVES RIGHT TO INSPECT AT ANY STAGE. SUITABLE PACKING SHOULD BE DONE TO PREVENT FROM MECHANICAL DAMAGES DURING TRANSIT AND STORAGE DELIVERY DETAILS: 50% within 4 months from the date of issue of Raw Material, balance of 50% within 9 months from the date of issue of Raw Material **Partial supplies are acceptable ILD CLAUSE: In the event the supplier fails to deliver the goods/service, within the stipulated Selivery period, BDL reserves the right to recover from the supplier, LD and not by way of penalty an amount as detailed in terms and conditions. A sum of 0.5% of the price only of the stores which the supplier has failed to deliver as aforesaid for each week of delay or part thereof, subject to a maximum of 10%. EMS: As BDL is EMS 140001:2015 certified organization, It is requested you as partner of BDL to maintain EMS standards like proper scrap disposal, maintenance of pollution Control Board Norms and conservation of resources to protect environment.. Option Clause: The Purchaser reserve the right to increase or decrease the quantity to be ordered up to 50 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to increase the order quantity by up to 50% of the contracted quantity during the currency of the contract at the contracted rates. Bidders are bound to accept the orders accordingly. TAX DETAILS: GST as applicable.BDL Reserves its right to release GST only after suppliers invoice /debt note is reflected in GSTR-28/2A within the specified time limit mentioned in GST law. Payment Terms: Payments shall be made within 30 days of issue of consignee receipt-cum- acceptance certificate (CRAC) and on-line submission of bills (This is in supersession of 10 days time as provided in clause 12 of GeM GTC) Dispatch: Free delivery at BDL Bhanur stores, Telangana. VALIDITY OF THE OFFER: The quoted prices will be valid for a period of 12 months from the date of submission of bid and prices are firm and not subject to alternation / variation on any account.Purchase Preference clause: Provisions as per Make in India order 2017 will be applicable for the vendors/service providers. Manufacturing of Components: Should be as per the drawing provided by BDL Finished Components: Should be delivered to BDL stores in proper packing condition (wrap in Oil Paper and pack in suitable container) to prevent from moisture, rusting, damage etc during transits and storage. All Packing boxes to be marked with Material Code, Drawing. No, Description, Type of Materials and Date of Manufacturing. Approved sources are eligible to quote/participate against enquiry remaining bids other than approval source will not be considered by TEC. Approved Sources for this item are eligible to quote /participate against enquiry. It is mandatory to upload approved source certificate issued by BDL for this item, Remaining bids other than approved sources will be disqualified. BOL reserves the right to go for GEM-reverse auction process or may finalise the tender without reverse auction if, required... Penalty Clause: The successful bidder will be debarred/blacklisted for the future tenders for a period as decided by BDL, if the bidder deviates from the agreed terms & conditions after the award of Purchase Order/ Work Order/Service Order apart from forfeiture of your EMD. Non-Disclosure of information given by BDL: Except with the written consent of the BDL, the seller shall not make use of any information supplied by the BDL for purpose of the seller. Any specifications or other details are for the purpose of manufacturing the articles and the Seller shall not use any such information to make any similar articles or part thereof for any other purpose. SPLIT ORDER RATIO: BDL reserves to split the order quantity with ratio of 35:25:20:20 AS9100D STANDARD TERMS: ). The supplier shall not supply the non-confirming product/counter fit against specification. 5). Supplier has to inform BDL in case of change in manufacturing process or input material or manufacturing facility. . Unless otherwise specified, supplier cannot outsource the items (order). =) 3) Supplier shall maintain the BDL product & production records up to 3 years. e). In case of non-conformity product, party has to inform BDL for further disposition action (ie, re- work, rejections etc.) ). Where ever applicable drawing issue no. Should be considered which is under column Ot. No 2). BDL representatives, Customer and Regulatory authorities reserve the Right of access to the suppliers organisation, their customer and regulatory authorities to the applicable areas of all Facilities, at any level of the supply chain, involved in the order and to all applicable records SELLER HAS TO PROVIDE DECLARATION STATING THAT THERE IS NO LEGAL CASE & FIRS PENDING AGAINST THE FIRM AND CONCERNED. Total Quantity : 5726

Refer document

Refer document

Refer document