Tender For Provn Of Tiling And Allied Works In Certain Smqs At Subrotopark; 1 Roughing surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust etc complete all as specified and directed 2 M&L for brushing neat cement slurry with 3.0 Kg of cement pe sq meter complete all as specified and directed. 3 M&L non skid ceramic coloured tiles 7 to 8 mm thick joint free tiles (square/rectangular) area of each tiles exc 0.11 sqm but n. exc 0.18 sqm, in floorsetc set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or bedding layer in cm (1:6) complete all as specified and directed. 4 M&L Glazed coloured ceramic tiles in vertical surface/ dado 350x 250x 7mm / 450X 350X 7mm mmthick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering in cement mortar 1:4 complete all as specifiedand directed. 5 Taking down cement plaster etc on brick wall or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and disposed off unserviceable materials to out side MOD land complete all as specified and as directed. 6 M&L 12 mm thick cement mortar 1:6 on unven surface ofbrick work or concrete surfaces on wallsurface even and smooth without using any extra cement complete all as specified and directed. 7 M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces incement mortar (1:3) as in ceiling,complete all as specified and as directed. 8 M&L 15 mm thickcement mortar 1:4 on other than fair faces of brick work or concrete surfaces on wallsurface even and smooth without using any extra cement complete all as specified and directed. 9 M & L Preparation of newly plastered or unplastered surface and applying two coats of distemper oil emulsion on walls complete all as specified and directed. 10 M & L preparation of newly plastered surface and applying three coats of white wash on ceilings complete all as specified and directed. 11 M&L Preparation of newly plastered or unplastered surface and applying two coats ofexterior weather proof (coat) paint on plastered/concrete surfaces of walls, paths , etc.,over a coat of primer complete all as specified and as directed by the Engineer-in-Charge. 12 M&L for complete removal of existing treatment of old decorated surfaces of walls by steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and washing, rubbing down andstoping of existing surface and making the surface even and smooth and apply Two coats of distemper oil emulsion on walls complete all as specified and directed. 13 M&LGreenmarble18-20 mmthickmachine cut ,beddedjointedandpointedwithgrey cementslurryincludingcuttingandpolishing Complete all as specified and as directed. 14 Taking up or down 15mm bore steel tubing and connections, including cleaning for re- fixing or removal to store complete all as specified and as directed. 15 S&F 15 mm bore steel tubing galvanized medium grade with all fittings and fixed concealed to walls and ceiling or laid in floors complete all as specified and as directed. 16 S&F brass chromium plated shower rose 125 mm size with swivel joints including fixing to pipe complete all as directed 17 S&F 15 mm dia bore CP wall mixture with all accessories complete all as specified and as directed. 18 S&F 15 mm dia bore two in one bib cock with all accessories complete all as specified and as directed. 19 S&F Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hookcomplete all as specified and as directed by Engineer-in-Charge. 20 S&F 15 mm dia bib taps,cast copper alloy chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. 21 S & F 15 mm boreangle valvecastscrewed down, high pressure, with crutch or butter fly handle,for iron pipe or for unionscomplete all as specified and directed. 22 S&F CP grating round 100mm dia with hole complete all as specified and as directed. 23 S&F in repair PVC flushing cistern, valveless, symphonic action type, 10 Ltr capacity, low level, white, with inlet, ball valve, float and handle including bracket complete all as specified and as directed. 24 S&F PVC connection of 45 cm long with 2 Nos PTMTside nuts screwed with iron pipe of 15 mm dia complete all as specified and as directed. 25 S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) excluding flushing cistern and flush pipe and including P or S trap and seat cover complete all as specified and as directed by Engineer-in-Charge. 26 S&Fplastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified and as directed by Engineer-in-Charge. 27 S&F in repair PVCfloor trap 75mm with grating icludingjointing with solvent complete all as specified and as directed. 28 S& F75 mmborePVC (SWR ) pipesinglesocketedinany lengthwithrubber ringjoints, laidintrenchesorinfloorsetccompleteallasspecifiedanddirectedbyEngr - in- charge. 29 S&F PVC (SWR) bends any radius for 75 mm bore PVC pipe with cement joints complete all as specified and as directed. 30 S&F in repair vitreous china WHB white, flat back, size 550 x 400mmincluding brackets ,cupling and all accessories etc complete all as specified and as directed 31 S & F Pillar taps, cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered Hot or Cold with long screwedshanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed 32 Taking down door chowkats or frames with shutters, any type(without taking off shutters from the frame) area not exceeding 1.50 sqm complete all as specified and directed. 33 S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube completeall asspecified and directed. 34 S & F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out ofMS tubes for top and bottoms railsMS frame shall be covered with heat moulded plain colour PVC C Channel having a PVC sheet strip of 20 MM width stuck in side with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail in either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded and sealed to the styles and rail with suitable PVC sheet beading and joint together with solvent cement, complete as specified and as directed. 35 S&F 100 mm long butt hinges medium weight cold rolled mild steel alloy with galvanized complete all as specifiedand directed. 36 S&F 100 mm long Aluminium handles, cast type, anodised complete all as specifiedand directed. 37 S&Fof 100 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specifiedand directed.
