Tender For Provision Of Urc At Af Stn Sulur; 1 GENERAL SUMMARY(Note : Schedule A Part I Building/ Structure is not pre priced by MES and the pre priced rate indicated as Rs. 0.00 under Col.5 signifies this fact only. Bidder shall insert their rate in Green field under column 6) 2 Schedule ‘A’ Part I“BUILDING/STRUCTURES ” M&L for Design, supply and erect Pre-engineered steel bldg steel structure of Internal size 15M x 30Mwith Ridge height as per design and 3.5M height at both ends, with Alu-zinc coated colour profiled sheet, Roofing sheets 0.50 mm thickness and yield strength of 550 mpa in wall cladding and roofing (approx 15% roof/wall sheeting with 2mm thick Polycarbonate sheet with integrated wire mesh) incl RCC foundation and plinth upto0.45m above ground level, AAC blockmasonry cubicals of height 2.4m with 03Nosaluminium doors, ceramic tile flooring, Plinth protection, anchor bolts, base plates and all structural steel items, rain water gutters and down take pipes with entry and exit doors with steel frames and shutters, aluminium doors, turbo air ventilators and Exhaust fanscomplete all as specified and as directed by GE 3 Schedule ‘A’ Part I“BUILDING/STRUCTURES ” M & L for Design, construction of Toilet facilities for Unit Run Canteen for Staff and Visitors with permanent specifications such as RCC M-25 (Design mix), framed construction with AAC solid block masonry, ATT and PU based water proofing treatment etc etc complete all as specified and as directed by GENote : - (i)The contractor should design forundation and super structure for the building andthe foundation should be designedaccording to the soil report and structural drawingsof the entire structureshall be submitted after vetted from IIT/NIT/IISC Bangalorealong with design calculation sheet.(ii) The toilet block shall be desinged and built according to the architechtural drawings along with schedule of finishes.(iv) Detailed yard stick along all connected documents shall be submitted before execution of the work for approval of accepting officer. Quoted rates are deemed to be included for all these provisions 4 GENERAL SUMMARY(Note : Schedule A Part II to VII are prepriced by MES under Ser No.4 and 5.Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only) 5 Total of Schedule ‘A’ Part II “INTERNAL ELECTRIFICATION” 6 Total of Schedule ‘A’ Part III “ PATH/ HARD STANDING” 7 Total of Schedule ‘A’ Part IV “ AREA DRAINAGE” 8 Total of Schedule ‘A’ Part V “ SEWAGE DISPOSAL” 9 Total of Schedule ‘A’ Part VI “ INTERNAL WATER SUPPLY” 10 Total of Schedule ‘A’ Part VII “ EXTERNAL WATER SUPPLY” 11 Total of Schedule ‘A’ Part VIII “ EXTERNAL ELECTRIC SUPPLY” 12 Sch A Part-IX - MISCELLANEOUS ITEMS(Note : This schedule is not pre priced by MES and the pre priced rate indicated as Rs. 0.00 under Col.5 signifies this fact only. Bidder shall insert their rate in Green field under column 6) 13 S & F modular flush box for mounting of modular cover plates 8 modules complete all as specified and directed 14 M &L for Cutting80mm dia cast iron and reducing to required length before laying pipes in position for insertion of new tees,branches of different sizes as per site requirementcomplete all as specified and directed 15 M & L for Riddling Sand obtained from excavation for cable protection 8cm under the cable and 15cm above the cable in trench and get the thick layer of 18cm after ramming complete all as specified and directed. Note :- In case sufficient sand not obtained from excavation, the quoted rate is deemed to be inclusive for the required additional qty obtain from out side MD land as directed. 16 M & L for Protection to cable with one layer of Fly ash bricks of size 23 x 10 x 10 cm laid flat butting to each other in such a way that the length of the bricks is at right angle to the central axis of the cablecomplete all as specified and as directed. 17 S&F angle cock, cast copper alloy fancy type chromium plated with long shank & cup concealed type for PPR pipe of 16mm borecomplete all as specified and as directed. 18 S&F LED light fitting 1 X 10 W, 220 V AC decorative box type with driven holder incl LED tube light connecting three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. 19 S&Fsteel body exhaust fan with lovers of size 300nmm sweep, 900RPM 230 volts single phase AC supply complete with bolts, nuts and washers suitably embedded in the wall/ prefabricated sheet etc including making suitable opening and provisioning of flexible cord copperof size 23/ 0.0076 from ceiling rose to exhaust fan for giving connectioncomplete all as specified and as directed. 20 S&F LT panel outdoor type (CPRI approved) made out of ms sheet 3.15mm thick angle iron of size (50x50x6 mm) with locking arrangement and painting with following asseccories suitable for incoming/outgoing arrangements:-(a)MCCB 100 Amps 4 PoleA - 01 No(b)MCCB 63 Amps 4 PoleA - 01 No(c)MCB SPN 6-32 AMP, 10 KA - 02 Nos(d)Aluminium bus bar150 Amp TPN- 01 Set(r) LCD multi function meter - 01 No(f)Indicating lamp set-01 Set of three(g)CT of suitableratio100/5 A- Set of 3 Nos 21 M&L Earthing with Galvanised Earth Plate Electrode 600x600x 6mm thick burried directlyin Ground (Earth Pit not less than 2.25 Metre below Ground Level) with Top edge of the Plate not less than 1.50 Metre below Ground Level, connected with Galvanised Earth Strip of size 32x6mm (upto 7.5m length) by means of Bolts, Nuts, Check Nuts and Washers of GI or Steel and connected Earthing Testing Point/Bus-bar including GI 40mm bore (dia) light grade Protection Pipe, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt, Magneisum Sulphate (1 : 1 : 0.5) in alternate layers of not exc 150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of size 350x350x50 mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, Funnel with GI Watering Pipe 20mm bore (dia) medium grade including necessary Excavation in any type of soil, Returning, Filling in and Removal of surplus Spoil disposal to out side MD land and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion including taking down old unserviceable one, complete all as per specified and as directed. 22 M&L Earthing with Galvanised Earth Plate Electrode 600x600x 6mm thick burried directlyin Ground (Earth Pit not less than 2.25 Metre below Ground Level) with Top edge of the Plate not less than 1.50 Metre below Ground Level, connected with Galvanised Earth wire of 4 mm (upto 7.5m length) by means of Bolts, Nuts, Check Nuts and Washers of GI or Steel and connected Earthing Testing Point/Bus-bar including GI 40mm bore (dia) light grade Protection Pipe, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt, Magneisum Sulphate (1 : 1 : 0.5) in alternate layers of not exc 150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of size 350x350x50 mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, Funnel with GI Watering Pipe 20mm bore (dia) medium grade including necessary Excavation in any type of soil, Returning, Filling in and Removal of surplus Spoil disposal to out side MD land and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion including taking down old unserviceable one, complete all as per specified and as directed.
