Tender For Special Repair Replacement Of Window Ac Against Ber Provn Of Ro Plant For Gagan Ashok Vihar providing Of Temp Or Toilet With Allied Works At Asc Offrs Mess In P Zone In The Area Of Age E M At Rms- 1 Supply and installation & testing of window AC complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality of capacity 1.5 ton rating 5 star with ISEER as as per latest Ministery of Power notifiation of cooling capacity 4500K Cal per hour (1.5 TR), Inverter type, operated on 230 Volt AC supply complete all as specified and directed.Make :O General/ Voltas/Blue star/LGNote:- (i) Cost of provision of making stand/ MS bracket for window AC fitting incl CPVC pipe 15 mm bore dia for draining out condensated water,4 Sqmm,3 Core copper wire for connection are included in quoted rate. 2 M&L for metal clad AC socket point single pole and neutralenclosure with a two pin and earth plug and socket complete with one single pole MCB SP 20 Amps etc complete all as specified and as directed. 3 Supply and install RO plant of capacity 1000 LPHincluding multigrade Filterof size 16 X 65, Activated Carbon Filter of size 16 X 65, raw water pump cap 1 HP, Micron Filter Set (10 micron) of size 20, micron filter set (5 micron) of size 20, SKID SS/MS cap 1000 LPH, High pressure pump of cap 2.2 HP, RO membrane size 80 x 40, Membrane housing 80x40, flow meter 2000 LPH- 02 nos, Pressure gauge -02 nos, electrical Panel, Dozing System-01 nos, filter media-01 jobcomplete all as specified and directed. 4 Supply, laying, fixing and replacement ofCPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and directed of following sizes :- 5 25 mm bore 6 50 mm bore 7 M&L forcutting existing steel water tubing inposition foralteration or addition for replacing damaged length/fittings etc of following size 50 mm bore etc complete all as specified and as directed. 8 S&F in replacement of PP-R Gate valves(brass insert)of size 25 mm as per requirement of the site including taking down old unserviceable gate valveetc complete all as specified and as directed 9 Supply and fixing GI gate valve of size 50 dia mm bore etc complete all as specified and as directed. 10 S&F PP-R Ball valves (brass insert) of size 25 mm bore as per requirement of the site ,including taking down old unserviceable ballvalve etc complete all as specified and as directed. 11 Supply and fixing rotational moulded polythylene water storage tank capacity 2000 ltr, 2 layer ISI Marked with lid cylindrical vertical with closed top hoisted mounted on staging /roof of OTM//Md Accn of the following capacity etc complete all as specified and as directed. 12 All as per item No 9.00 (here-in -before) but 1000 ltr capacity. 13 Supply and fix staging / frame work forwater tanks using standard mild steel sections like angle iron / MS pipe / flat iron / sheets etc using steel of Fe 290 (Gde E-165) quality - A including necessary welding suitable s PVC water tank complete all as specified and directed by Engr in charge. 14 M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable1100 volts grade with multi-stranded copper conductors, drawn throughand including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connecting to earth dolly, including PVC rectangular box for mounting switches/sockets/regulators etc. with 3mm thick plastic laminated sheet cover of suitable size as required at site complete all as specified and as directed. Make:- Finolex/Richa/RR KabelMake of caping/casing & PVC boxes :- Prestoplast/Finolex/supreme/Richaa 15 Onelight/Exhaust fan pointcontrolled by one, one way switch. 16 OneExhaust/Ceiling Fan point controlled by one, one way switch 17 All as per item No 12.00 (here-in-before) but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed. 18 M&L for Switch Piano, flush type single pole, one way 5 Amps complete all as specified and directed. Make : Anchor/Legrand/Kinjal 19 M&L for Switch Socket combination, 2 in 1, 5 pin 6A/16A flush type complete all as specified and as directed. 20 M&L forceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and directed. Make : Anchor/Legrand/Kinjal 21 S&F for LED light fitting 1 x 20 W (4 FT), wall /surface mounted, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size in & incl flexible hose from ceiling rose to fitting complete all as specified and as directed. Make : Crompton Greaves Cat Part No : CCS-102-20-SL-DP-NWH/Bajaj/Philips 22 S&F for LED light fitting 1 x 10 W (2 FT), wall /surface mounted, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size in & incl flexible hose from ceiling rose to fitting complete all as specified and as directed. 23 Supply , fixing and testing of LED Bldg Security light fitting of capacity 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting and all as specified and directed by Engr-in-Charge.Make : Havells/CG/ Bajaj/ Philips CG, Cat No- LSTS-20-CDL-M/ Bajaj/ Philips 24 M&L for MCB Distribution board double door type SPN 4 way, sheet steel, powder painted, withneutral link & earth bar etc. and fixing MCBs of various rating capacity MCB DBs complete all as specified and as directed.Make : Legrand Cat Part No 507611/ABB/Siemens 25 Supply and fixingMCB SPN 32 amp rating 240V, 10KA C curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioningcomplete all as specified and as directed. Make : Legrand Cat Part No 408618/ABB/Siemens 26 Supply and fixingMCB SP 6-32 amp rating 240V, 10KA C curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.Make:- Legrand Cat No 408587-95 /ABB/Siemens 27 Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed. 28 M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 16 sq mm, 2 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items.Make : Richa/Finolex/Polycab 29 M&L for spread fine river sand in trenches complete all as specified ans as directed. NOTE: For measurement purpose, punned down thickness shall only be taken. 30 M&L for laying brick sub class B old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed 31 Supply & laying tubes Light grade galvanised, with all fittings, fixed complete to walls, poles, ceilings or laid in floors/ trenches/ road crossing for protection of cables of size 25 mm dia bore complete all as specified and as directed. Make : Tata/Jindal/Prakash 32 Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate NRV, connection piece etc complete all as specified and as directed. 33 Material and labour for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below ground level connected with galvanised earth lead 4mm size by means of nuts, bolts, check nuts and washers made of glavanised iron pipe of 20mm bore (light grade) and other and connected to earthing test point or lightening arrestor or main controlling switch as directed including proviing funnel with 15mm bore galavised iron pipe (medium grade) wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickess) all round the earth electrode, concrete erth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC(1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15cm C/C bothways and suitable handle mad of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50m etc all as shown on electrical plate No.3 of MES schedule Part-I (2009) complete including testing on completion all as specified and as directed .Note :Earthstrip upto 7.5m from earthplate shall be measured and paid in the quoted rate. 34 M&L for surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/ loose soil etc complete all as specified and as directed. 35 M&L for excavation in trenches n.exc 1.5m wide and n.exc 1.5m in deepth; for foundation etc or for shafts, wells, cesspits, manhole, pier holes, etc n.exc 10 Sqm on plan andn.exc 1.5 m in depth and getting out in soft/loose soil etc complete all as specified and as directed. 36 M&L for excavation in trenches for each additional 1.5m or part thereof in depth beyond the first 1.5 mdepth and getting out in soft/loose soil etc complete all as specified and as directed. 37 M&L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete etc complete all as specified and as directed. 38 M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and as directed. 39 All same as per item No 34.00 (here-in-before) but 5mm dia and over and including 10mm dia in stirrups spacers and binders. 40 M&L RCC(1:2;4), Type B-1 (using 20mm graded stone aggregate), Nominal mix as in foundations, including rafts, footings, foundation beams; plinth beams; base for columns, etc.; basement slabs, unde-reamed piles and mass concrete etc complete all as specified and as directed. 41 M&L RCC(1:2:4), Type B-1 (using 20mm graded stone aggregate), Nominal mix as in coloums, pillars, piers, posts and struts etc complete all as specified and as directed. 42 M&L for RCC (Nominal Mix) typeB1 (1:2:4), (using 20 mm graded stone aggregate) as in beams, cantilvers, bressummers, lintels over 1.5m span etc complete all as specified and as directed. 43 Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc complete all as specified and as directed. 44 Use and waste of formwork to sides of pillars posts, struts, piers, columns and stanchions finished the suface rough etc complete all as specified and as directed. 45 Use and waste of formwork to sides and soffits of floors or roof beams, beams haunchings, girders,bressummers lintels, cantilevers, shelves including supports overhangs etc also splays between floors and beams etc complete all as specified and as directed. 46 Supply only water proofing compound etc complete all as specified and as directed. 47 M&L for brick work with sub class `B bricks straight or curved on plan exc 6m mean radius built in CM (1:6) etc complete all as specified and as directed. 48 M&L for brick work with sub class `B old size bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:4) etc complete all as specified and as directed. 49 S&F Anodised aluminium powder coated (minimum thickness of powder coationg 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete as as specfied 50 S&Ffor providing sliding type (3 Track +3 shutter) aluminium windows and ventiletor, section profiles of aluminium as per sketch No SK/2019/01 dated 21/01/19,aluminium alloy extruded sections conforming to HE 9-WP of BIS 733 and HP 9 -WP of BIS 1285 as amended, with minimum thickness of frames (outer bottom, Top & side ) 1.5mm and sliding sash (stiles & rails) of minimum thickness 1.2 mm. The windows shall be procured from a BIS license factory manufactoring windows to BIS-1948, The EPDM gaskets, rollers, recessed handles cum locks aluminium snap beading for receving glass/wiremesh with stainlss steel screws shall b provided with windows. The aluminium extruded section shall be of make Jindal/Hindalco/Alom extrusions etc all as listed etc complete all as specified and as directed. 51 S&F mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm etc complete all as specified and as directed. 52 S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, suppling and fixing in opening as per specification and drawing etc complete all as specified and as directed. 53 S&F factory made solid panel PVC door shutter 30mm thick (style).consisting of frame made out of MS tubes for top & bottom rails.MS frame shall be covered with eat moulded plain colour PVC `C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side &as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement suppling & fixing in the frame at site as per specification etc complete all as specified and as directed. 54 S&F 4 mm thick frosted glass fixed to aluminium frame work n.exc 0.5 Sq.m in each pane etc complete all as specified and as directed. 55 S&F vitreous china water closet Padestal pattern (white) including fixing bolts, flushing cistern and flush pipe and including EWC Sheet cover etc complete all as specified and as directed. 56 S&F 150mm long aluminium anodised barrel tower bolts of extruded section etc complete all as specified and as directed. 57 S&F 150mm extruded aluminium alloy handles fabricated type anodised etc complete all as specified and as directed. 58 S&F 100mm medium weight butt hinges cold rolled mild steel etc complete all as specified and as directed. 59 Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering etc complete all as specified and as directed. 60 M&L for hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammmed to a true surface etc complete all as specified and as directed. 61 M&L 40 mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as damp proof course to horizontal or vertical surfaces including necessary form works, applying evenly a coat of blown type bitumen at 1.50 kg per sqm and blinding with clean dry sand @ 0.05 cum per sqm including 150 micron thick polythene film laid on a coat of bitumen primer @ 0.30 to 0.50 kg per sqm etc complete all as specified and as directed. 62 M&L PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate), 75mm thick as in sub base of floor etc complete all as specified and as directed. 63 M&L for non skid coloured joint free tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exc 0.38 sqm, as in floors etc. set and jointed in neat cement slurry and pointedin white or coloured cement to match the shade of tiles laid over & including screed bed 15mm thick in CM (1:6)etc complete all as specified and as directed. 64 M&L forcoloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick laid over and including 10 mm thick bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles all as directed. 65 M&L for 75 mm thick PCC (1:3:6) type C-2 , using 40 mm graded stone aggregate in plinth protection/aprons/path laid to slope of (1:12), finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) etc complete all as specified and directed. 66 M&L for rendering 15mm thick plaster in CM (1:6) on fair faces of brick or concrete work finished the surface even and smooth without using extra cement etc complete all as specified and as directed. 67 M & L rendering 15mm thick on cement mortar CM (1:4) mixed with water proofing compound @ 3% of qty of cement finishedof brick or concrete work finished the surface even and smooth without using extra cement.. WPC will be measured and paid separately etc complete all as specified and as directed. 68 M&L for preparation of new plastered surfaces and applying two coats of white wash on wallsall as specified & directed. 69 M&L for preparation of new plastered surfaces and applying two coats ofcement base paint over a coat of alkali resistant priming paint on walls all as specified & directed. 70 M&L for 3 mmthick Birla white putty/JK white wall care putty on walls etc complete all as specified and as directed. 71 Supplying and laying 15 mm outer diameter CPVC pipe SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as direcetd. 72 Supplying and laying 20 mm outer diameter CPVC pipe SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as direcetd. 73 S&F 15mm bore dia bib taps long body cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed. 74 S&F Brass chromium plated shower rose 125 mm size etc complete all as specified and as directed. 75 S&F Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange of chromium plated etc complete all as specified and as directed. 76 S&F 15mm dia bore fancy type swan neck Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed dwon high pressure, with or wothout lettered `Hot or `Cold with long screwed shanks and fly nuts, screwed for iron pipe etc complete all as specified and as directed. 77 S&F CP angle cock 15mm cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions etc complete all as specified and as directed. 78 S&F inPVC low level flushing cistern of 10 ltrs capacity incl flush pipe etc complete all as specified and as directed. 79 S&F in repairs Vitreous china wash down water closet pan, (pedestal pattern), white, with and including plastic water closet seat, white, closed pattern with flat bottom, andcover and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed. 80 S&F vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed etc complete all as specified and as directed. 81 S&F vitreous china half stall urinalwhite, with grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia etc complete all as specified and as directed. 82 S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) etc complete all as specified and as directed. 83 S&F Grating doom 100mm dia of PTMT (min wt -25gms) etc complete all as specified and as directed. 84 S&F PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and as directed. 85 S&F towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (min wt - 170 gms) etc complete all as specified and as directed. 86 S&F corner glass shelf assembly 300 mm radius made of 6 mm thickglass, with CP railing, fixed with suitable rowal plug & screws complete all as specified and directed. 87 S&F soap dish chromium plated steel/stainless steel, approx size 160x160mm x 1mm thick , fixed to walls with plugs & CP brass screws complete all as specified and directed. 88 S&F CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed. 89 S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. 90 Supply & fix PVC (SWR) pipes single socketed in any length with rubber ring joints,but bore of pipe 150 mm dia laid in trenches or floors etc complete all as specified and as directed. 91 Supply & fix PVC (SWR) pipes single socketed in any length with rubber ring joints,but bore of pipe 110mm dia laid in trenches or floors etc complete all as specified and as directed. 92 S & F 110mm dia PVC (SWR) branch piece, single (single Y equal or unequal) complete all as specified and directed. 93 S & FPVC(SWR) bends any radius 110 mm dia etc complete all as specified and as directed. 94 S&F in repair PVC connection pipe 15mm bore 450mm long etc complete all as specified and as directed. 95 Material and labour for looking mirror ofsize 600mm x 450mm x 5mm thick bevelled edge of selected quality glass, decorative type mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers completeall as specified and as directed. 96 M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite & including 20 mm thick screed bed (bedding layer) in CM (1:4), all as specified & directed by Engineer-in-charge. 97 Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and as directed. 98 Returning, filling in, including spreading, leveling, watering & well ramming in layer s not exc 25 cm etc complete all as specified and as directed. 99 Removing excavation material n exc. 50m & deposited where directed at a level n exc. 1.5m above the starting point etc complete all as specified and as directed. 100 S&F rotational moulded polyethylene 1000Ltrs Capacity water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia all as specified anddirected. 101 M&L for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed. 102 S&F pre-painted galvalume aluminium zinc coating GI based semi corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws etc complete all as specified and as directed. 103 S & F Pre-painted galvatume aluminum zinc coating GI vased Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and as directed. 104 S & F of steel work as in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS – 1161 – 1979 grade St – 240 . hip and jack rafters; purlins where connected to common rafters and running rails; fixed with angle cleats orquality confirming to GDE Fe 410-W complete all as specified and as directed by the Engineer-in-Charge 105 S&F Plates (plain or chequered) channels. Square cut or notched ) (ordinary and counter sunk) forming holes, without any attachment of Fe-410-W (Gde-E-250 quality-A) etc complete all as specified and as directed. 106 S & F 5-10mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm but n exc 15cm long complete all as specified and as directed by the Engineer-in-Charge
