Tender For Special Repair Of Offrs Mess Bldg No. 01 And 2A Ncc Ata Kamptee.- 1 Dismantling of Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. 2 M & L for 0.50 mm thick prepainted galvalume aluminium zinc coating G.I. based corrugated steel sheet (AZ150) of any colour having tensile strength of 550 MPA as in roof covering, fixed with and including self tapping screw/J-type bolt/L-type boltcomplete all as per manufacturer instructions complete all as specified and as directed. 3 Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick (AZ150) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J-type bolt/L-type boltcomplete all as specified and as directed. 4 Dismantling of timber fillets,rails, posts, rafters, purlins under 40 Sq cm in section complete all as specifed and directed. 5 S&F mild steelwork such as roof trusses (framed), trussed, purlins, and heavy bracket framing (Beam, Tee, angle, Channel or flat section) including distance pieces, cleat etc complete all as specifiedand directed. 6 M&L Mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming toFe-410W Gde E-250 quality B all as specified and directed. 7 S&Ffor 11 to 15 mm mild steel screws bolts (machine made) with hexagonal or square heads at one end and screws both ends each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm not exc 10 cm long complete all as specified and as directed. 8 S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plate, riveting, etc n.exc 10 kg each brackets, conforming to Fe-290. Gde E-165 .complete all as specified and directed 9 M&L for preparation of new or previously untreated surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described andapplying two coat of synthetic enamel paint over a coat of redoxide on new surfaces in any tint complete all as specified and as directed. 10 M&L hardcore broken stone or boulders of gauge n.exc. 63mm deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface for path complete all as specified and directed. 11 Excavation in post holes in hard/dense soil (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and around, in layers not rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50cm and making good surface complete all as specified and as directed. 12 M&L PCC 1:3:6type C2 ( using 40 mm graded stone aggregates) as in foundation filling and mass concrete complete all as specified and as directed. 13 M&L for providing 100 mm thick cement concrete 1:4:8 type D2 (Using 40mm graded stone aggregate) as in sub base complete all as specifiedand directed. 14 Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness and wall paneling including cover fillets,complete all as specified and directed. 15 Providing and fiixing ceiling at all heights with GRG (Glass fibre reinforced gypsum) false ceiling tilesof size 595x 595mm of approved texture design and patterns having moisture content less than 2% humidity resisitance of 995 NRCO. 5 to .75 as per IS 8225: 1970 and light reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T-grid of hot dipped galvanised ironsectio of .33mm thick (galvanised @ 120gms per sqm including both sides per sqm including both side comprising of main T runner of size 15x 32 mmof length 3000mm crossT of size length 600 mm to form gride Gavanised @80 Gm per sqm I.e 50 mm long and 8mm outer diameter M -6 fasteners 6mmdia fully galvanised hanger rod upto 1000mm long L shaped level adjuster of size 85x25x2 mm galvanised iron perimeter wall angle of size24x24x.4 mm of length 3000mm to be fixed on partition wall with the help of plastic rawl plugs at 450 mm center to center 40 mm long dry wall wood screws caried out as per specification and drawing all as directed by engr in charge with semi perforated 12 mm thick micro trangular edge GRG false ceiling tiles complete all as specified and directed. 16 Demolition of RCC in Roofs, floors (other than ground floors), beams, staircases, landing,chajjas and similar suspended work, complete all as specified and directed. 17 Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200 mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified and as directed. 18 M&LFormwork to Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide complete all as specifiedand directed. 19 M&L RCC RCC 1:1 1/2:3 type A-1 (nominal mix) using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. 20 Providing precast cement concrete Type B1 1:2:4 (20mm graded stone aggregate) set in CM 1:4 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas,water roughs,mangers , shelves and similar articles with plain faces, complete all as specified and directed. 21 S&F milt steel TMT bars 10 mm dia and over , cut to length, bent to shape requred, including crancingbending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and as directed. 22 Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m complete all as specified and as directed. 23 M&L for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6complete all as specified and as directed. 24 All as per item No 23 here-in-above but half brick wall in CM 1:4 complete all as specified and as directed. 25 Taking down cement Plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of debris, complete all as specified and as directed 26 M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces with CM 1:6 on internal walls finished even and smooth (without using extra cement) complete all as specified and directed. 27 M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:4 with and including liquid WPC on external walls finished even and smooth (without using extra cement) complete all as specified and directed. 28 Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including prepration of surfaces complete all as specified and directed 29 M & L for prepartion of new plastered surface of wall and applying two coats of oil bound distemper over a coat of Primer over a coats of wall care putty complete all as specified and directed. 30 M&L for applying three coats of white wash on undecorated ceiling surfaces complete all as specified and directed. 31 M&L preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of white wash complete all as specified and as directed. 32 Preparation of old plastered surfaces of wall and applying one coat of cement base paint complete all as spd and directed. 33 Dismantling floor, hearth or wall tiling including cement mortar beddeing (but not backing), removing serviceable tiles to store and debris complete all as specified and as directed. 34 M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed. 35 Material & labour for glazed ceramic coloured tiles 300mm x 450mm, on vertical surface such as skirtings/dados set and jointed in neat cement slurry and pointed in coloured cement to match and incl.10mm thick backing coat in CM 1:3 finished even and fair complete all as specified. 36 Demolition of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar complete all as specified and directed. 37 M&L for pre-polished Machine cut Kota stone slab flooring 20-25 mm thick over cement screedbase 20mm thick in CM 1:4 laid and jointed wih grey cement slurry mixed with pigments to match the shade of the slab incl rubbing and polishingcomplete, all as specified and directed. 38 M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry @ 2 Kg per SQM, mixed with pigment to match the shade of the slab incl rubbing and polishing, laid over and including 10mm thick screedin cement mortar 1:4 incl taking down old one, complete all as specified and directed 39 M&L for rubbing and polishing to existing kota stone flooring, complete all as specified and directed 40 S&F pre-polished granite 20mm thick fixed on platform/shelves/steps/cill over 20mm thickscreed bedin cement mortar 1:4 including necessary moulding etc complete all as directed. 41 Taking down door / window frame with shutter (without taking of shutter from the frame )area exc 1.50 sqm but not exc 4 sqm complete all as specified and directed. 42 Taking down door / window frame with shutter (without taking of shutter from the frame )area n. exc 1.50 sqm complete all as specified and directed. 43 S&F Pressed steel frame for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete. 44 S&F Pressed steel frame for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as directed & Spd . 45 M&L PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified and as directed. 46 Supply & fixing 30mm thick 2nd class hard wood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), kiln seasoned and chemically pressure treated complete all as specified and as directed. 47 Supply and fixing second class hard wood 35mm thick factory made Plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. 48 Supply and fix aluminium (colour powder coated ) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement(Notes : (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item;(ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/tint(Make of Aluminium Sections powder coated : Jindal or equivalent of JINDAL). 49 Supply, fabrication and fixing anodised aluminium doors fixed or openable including frame/chowkats etc from hollow rectangular sections like chowkats of size 100 x 44mm x 1.59mm (appx), vertical styles of size 82 x 44 x 1.59mm (appx) top and middle rails of size 82 x 44 x 1.59mm (appx) bottom rails of size 114 x 44 x 1.59mm (appx) complete including necessary jointing cleats, glazing clips, anodised aluminium beading and rubber gasket etc for securing glass, anodised aluminium fittings such as handles, other standard fittings, aluminium tower bolts - 2 Nos, Hydraulic Door closer of designation No-3- 01 No and accessories for locking arrangements etccomplete all as specified and directed. Note:- Glazing shall be measured and paid for separately under respective items complete all as specified and directed. 50 S&F colour powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. 51 S&F colour powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21100mm long (2 no.) suitable handle (1no.) complete all as specified and directed. 52 S&F 4 mm thick figured (frosted) glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete. 53 S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. 54 S&F Solid PVC Door Frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specified and as directed. 55 S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 4mm thick moulded laminated PVC Sheet on the front face & 4mm plain colour PVC sheet on back face, with wood free EPS supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. 56 S & F 100 mm long SS butt hinges and fixed with screw/welded to frames etc complete all as specified and as directed. 57 Supply & fixing 150mm Aluminium barrel tower bolts, fixed complete all as specified and as directed 58 Supply & fixing 125 mm Aluminium pressed handles fixed complete all as specified and directed. 59 S & F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed. 60 S&F 2 nd class hard-wood,small fittings such as bracket of any sizes, hinge blocks, cleats, door/window stoppers and like articles not exceeding 200 cubic centimetres each complete. 61 M&L for complete removal of existing treatment of old wooden surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. 62 M&L aluminium (anodised) grill made out of 5mm wide flat, square, rectangular or similar section, fixed with channel of size 38mm x 12 mm x 13mm (Section 8778) complete all as per manufacturers catalogue 7 specifications (Make: Grill No. 20 of DECO GRILL or equivalent) complete all as specified and directed. 63 Demolition of cement concrete any description and in any position not otherwise specifically provided forcomplete all as specified and directed. 64 M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as spd and directed. 65 M&L for providing 75 mm th cement concrete 1:4:8 type D2 (Using 40mm graded stone agg) as in sub base complete all as specifiedand directed. 66 S&F in repairs 25mm dia stainless steel curtain rod of approved quality including cutting and fixing to curtain brackets complete all as specified and directed 67 S&F fancy type curtain brackets of approved quality fixed to wall with screws complete all as specified and directed. 68 S&F GI tubing 15 mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection complete all as specified 69 S&F GI tubing 20 mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection complete all as specified 70 S & F waste fitting, 32 mm/40mmbrass, chromium plated forsink, basin, etc with long screwd shank and fly nut complete all as specified and as directed. 71 S&F in repair sinks with drainage board made of stainless steelthick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm incl waste pipe 32mm dia complete all as specified and directed. 72 Supply & fixed in repairs one piece vitreous china wash down water closetP trap round of size 670 x 365 x 740 mm along with soft close seat cover and twin flush white colour with all fittings including joining mild steel CP or aluminimised hinging device,complete all as specified and directed. Make: CERA cat No S1013201 or equivalent of Hindware/Prayag/Jaguar. 73 S&F in repair Wash Basin oval type (56x41cm), (Make : Hindware) (CAT No. F-10017 or equivalent in CERA) including Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, complete all as specified and directed 74 Supply only pillar cock, Swan neck central hole basin mixer with hot/cold connection without pop up waste systemcomplete all as specified and directed.Make:- Prayag Cat part No 8750 or equivalent in Hindware / Cera. 75 S & F in repair PVC connection 15 mm dia, 450 mm long including PTMT check nut ,complete all as specified and directed. 76 S&F in repairsstop valve/ angle cock 15 mm dia cast copper alloy high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed. Chromium plated fancy type, complete all as specified and directed. 77 S&F in repairs2-way angle cock with flange 15 mm dia cast copper alloy high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed. Chromium plated fancy type, complete all as specified and directed.Make:- Prayag Cat part No 7711 or equivalent. 78 S & F in repairsbib tap 15 mm dia cast copper alloy chromium platedfancy type with crutch or butter fly handle screwed for iron pipe or for brass ferrulecomplete all as specified 79 S&F in repair towel rail complete all as specified and directed.Make:- Prayag Cat part No BA-40 or equivalent in Hindware / Cera. 80 S&F in repair wall mixer, 3 in 1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe connecting legs & wall flange including showers both hand and over head,complete all as specified and directed.Make:- Jaquar cat part No FUS-29281 or equivalent. 81 S&F in repair toilet paper holder complete all as specified and directed.Make:- Prayag Cat part No BA-48 or equivalent. 82 S & F in repair health faucet of 15 mm bore brass cromium plated including PVC pipe to connection GI tubing 15 mm boreall completeall as specified and directed. (Make: Prayagcat no BEA-40. 83 S&F in repairs Soap dish, CP 125mm size fixed to plugs with chromium plated brass screws complete all as specified and directed. 84 S&F in repair glass shelf 500x125mm with brackets complete all as specified and directed.Make:- Prayag Cat No BEA-45 or equivalent. 85 S&F in repair corner sheet glass shelf assemble consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing complete all as specified and directed. Make prayag cat No BEA 44 or equivalent 86 S&F in repairs 40mm bore of pipe low density polyethylene pipe (LDPE) of pressure rating 6kg/cm fixed complete all as specified and directed. 87 M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solventcement complete all as specified and directed. 88 S&F in repair PVC (SWR) gully trap 125/110 mm , setting and jointing with solvent cement complete all as specified and directed. 89 S&F in repair 75 mm borePVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floorscomplete all as specified and directed. 90 S & F in repair 110 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls with stack clamp every one mtr apart complete all as specified and as directed. 91 S&F 110mm PVC (SWR) bends any radius with oval access door complete all as specified and as directed. 92 S&F 75mm PVC (SWR) bends any radius with oval access door.complete all as specified and as directed. 93 S&F 110mm PVC (SWR) junction single, (Single T) equal or unequalcomplete all as specified and as directed. 94 S&F 75mm PVC (SWR) junction single, (Single T) equal or unequalcomplete all as specified and as directed. 95 S&F PVC cowl slotted vent cowl 110 mm sizecomplete all as specified and as directed. 96 Dismantlingwater tank of capacity exc 500 ltr & not exc 1000 ltrs and removing to store of any description complete all as specified and directed 97 S & F 2000 ltrs capacity Rotational moulded polyethylene water storage tanks white colour triple layers (Cylindrical vertical with closed top) hoisted and fixed in position including connections and 20 mm boreBall valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm etc, completeall as specified and directed. 98 S&F in repair CP grating of size 100mm dia complete all as specifed and directed complete all as specifed and directed. 99 S&F in repair Bevelled Edge Looking Mirror of selected quality glass, mounted on wall 5mm to 6mm thick fixed with fancy arrangement etc complete all as specified and directed. 100 M&L Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3, complete all as specified and directed. 101 Cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girthin cement mortar 1:3complete all as specified and as directed. 102 M&L for cement concrete type B0, (1:2:4) (using 12.5mm graded stone aggregate) as in benching/coping and the like including weathering slightly round or chamfered angles and throatingcomplete all as specified and directed. 103 Taking down point wiring with aluminium conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to macth with existing surfaces including white washing/colour washing/ distempering to match with existing wall/floor/ceiling finishes, complete all as specified and directed. 104 Taking down sheet metal enclosure, DB & MCBsmain switch etc and making good distrubed sufaces to match with exisiting surfaces, complete all as specified and directed. 105 Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces, complete all as specified and directed. 106 Material and labour for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealedin wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmmmodular boxessunk on wall for mounting of any type modular switches, switch sockets, fan regulator etc includingmodular coverwith frame any size including dummy switches wherever required complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch, complete all as specifed and directed.Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate.All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly. 107 All as per item Sl No 106 above but One ceiling/exhaust/wall fan point controlled by oneway switch and regulator, complete all as specified and directed. 108 All as per item Sl No 106 above but One 3 pin 5 amp socket outlet point on the same board with other switches, complete all as specified and directed. 109 All as per item Sl No 106 above butOne 3 pin 5 amps socket out let point on independent board,but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmmfor 15 amps power point, complete all as specified and directed. complete all as specified and directed. 110 All as per item Sl No 106above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmmfor 15 amps power point. complete all as specified and directed. 111 Material and labour for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed inwall of the size 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm, complete all as specified and directed.Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same Make. 112 Supply and fixing for switch modular type single pole one way 6 amp 1 module 250 volts AC suitable for modular switch boxes, complete all as specified and directed. 113 Supply and fixing for socket modular type single pole one way 6 amp 2 module 2/3 pin 250 volts AC suitable for modular switchboxes, complete all as specified and directed. 114 Supply and fixing for switch modular type single pole one way 6/16 amp 3 pin 250 volts AC suitable for modular switch boxes, complete all as specified and directed. 115 Supply and fixing for socket modular type single pole one way 6/16 amp 2/3 pin 2 module, 250 volts AC suitable for modular switch boxes, complete all as specified and directed. 116 Supply and fixing ceiling rose, surface type, three terminals 5 amps, complete all as specified and directed. 117 Supply and fixing0-4 step -2 module modular type electronic regulators for ceiling fan 1200/1400 mm sweep, 240 volts, 120 watts single pole complete all as specified and directed. 118 Supplying and fixing 20-22 Watt LED Tube light fittings completewith aluminum body including tube rod, driver with not less than 2000 Lumen O/P andI/p rated voltage 240V connecting with3 core 1 sqmm copper conductor cable complete all as specified and directed. 119 Supplying and fixing 10 Watt LED Tube light fittings completewith aluminum body including tube rod, drivercolor temperature 3000K/6500K rated voltage 240V connecting with3 core 1 sqmm copper conductor cable complete all as specified and directed. 120 Supply and fix lamp holder insulated body with back plate for angle/ batten fitting complete all as specified and directed. 121 Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V ACcolor temp 6500K/3000K as specified recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size completE all as specified and directed. Make : Philips/Havells/Bajaj 122 Supply & fixfittings with recessed typet LEDdown lighters 12 W, round/square as specifiedby EIC including driver withrated voltage240 V , 50 Hz, complete all as directed by the Engineer-in-Charge. Make: Havella/Philips/ Bajaj 123 Supply and fix building security lightLED25 W with Lumen O/P 1800 with driver withrated voltage 240 V, 50Hz,including mounting GI (made out of 25 mm dia light grade pipe 0.8 m bent two shape including FI clamps nut bolts etc. complete all as specified and directed.Make : Philips/Havells/Bajaj 124 S&F LED strip 5m long 25W 240V 50Hz with drivers and fixing arrangement complete all as specified and directed. Make: Bajaj/ Philips/Havels 125 Supply and fix Chip On Board(COB) light 6W warm white 36 degree Beam angle tiltable round/square complete all as specified and directed 126 S & F wall decorative light 2 way up and down warm white 7 W , 220 V, 50 Hz complete all as specified and directed 127 Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed 128 Hanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed 129 Supply and fixing ceiling fans complete with three blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, Min air delivery 210 CFM with service value 6 BEE, Five star rated with brushless direct current motor (BLDC)complete all as specified and directed. 130 Supply and fix exhaust fan made of metal body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed. 131 Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 200mm complete all as specified and directed. 132 S & F wall fan 400 mm sweep dusty rose white square remote controlled min 65 CMM air delivery with mounting accessories, guard ring 220V, 50 Hz 3 blades complete all as specified and directed. 133 Material & labour forsheet metal enclosure powder coated CPRI approved CRCA sheet for 3 phase and neutral 2 mm thick including aluminium busbar of 200 A capacitywith arrangemennt and including the following:- MCCB 100 A 4P 16 KA- 02 NOsAutoTransfer switch(ATS) 100 A- 01 No TPN 32 A -02 noMCB SPN 32A ---4 Nosall internal wiring with FRLSH copper conductor 134 Supply and fix sheet metal enclosure single pole & neutral for 240 volts12 way with 200 Amp rated bus bar flush /surface mounting, double door, complete all as specified and directed. 135 Supply and fix sheet metal enclosure single pole & neutral for 240 volts8 way with 200 Amp rated bus bar flush /surface mounting, double door, complete all as specified and directed. 136 Supply and fix MCB Triple pole & neutral 240 volt40 to 63 amps 10 KA, complete all as specified and directed. 137 Supply and fix MCB single pole & neutral 240 volt 6 to 40 amps 10 KA, complete all as specified and directed. 138 Supply and fix MCB single pole 240 volt 6 to 40 amps 10 KA, complete all as specified and directed. 139 Earthing complete with galvanised steet earth plate electrode 600x600x6mm thick burried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr.below the normal ground level connected to galvanised earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified and testing on completion including the material and labour for :-(a) Excavation and earth work or drilling hole for electrode in any type of soil(b)PCC pit in cement concrete 1:2:4 TYPE B-1(c)Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric(d)Funnel with watering pipe of GI 20mm nominal bore light grade and copper lugs etc all as specified.(e)15mm nominal bore meduim grade GI protec-tion pipe 7.50 metre long for protection of earthing lead.(f)Requisite quantity of charcoal and common salt(g) Connection to earthing test point and testing on completion. 140 S&F 150mm long aluminium anodised barrel tower bolt and 12 mm dia fixedcomplete all as specified and as directed. 141 S&F 200mm long aluminium anodised barrel tower bolt and 12 mm dia fixedcomplete all as specified and as directed. 142 S&F in repair 300 mm long Aluminium sliding door bolts, bolt type bolt 16 mm dia with and including a min of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed. 143 S&F 150mm long Aluminium handles, cast type, anodised complete all as specified and as directed. 144 S&F 200mm longfancy type brass skeleton tower bolts with cast brass plate and staples and rolled or drawn brass bolt and fixed and 12 mm dia fixed complete all as specified and as directed. 145 S&F 250 mm long fancy type brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed. 146 NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 46,069.00]
