Tender For Electrical Upgradation Of Upsida Industrial Area, Amausi (Part-2) District Lucknow Under Aiim-2, 1 Supply & fixing steel tubular pole 9 Metre long designated 410 SP-29 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect.(G.I Bottom) (uppwd Item no 610) 2 Supply & Fixing of 32 MM Dia 1.20 Mtr long G.I Pipe Bracket For Fixing of LED lights complete in all respects with clamp etc 3 Spray Painting of ST pole and all mountings on it with two coats of aluminium paints with an under coat of red oxide paint upto10 M. support above the ground level as per direction of Engineer in-charge of work/site including T&P , men & material required for proper completion of work UPSIDC Sch No 24.20 (A) 4 Tree Branches Triming for removing dark spots including cost of all material men and T&P complete in all respect rates 5 Supply and fixing of smart LED street light fitting having diming controller with smart control setsuitable for 120 Wattconfirming to IP 65 and bove protectioncomplete in all respect.(Make-Bajaj, Philips, Wipro, Crompton) 6 Supply and fixing of tiranga light light 18 meter roll 220V 120 LED luminaire with driver set confirming to IP 65 protection complete in all respect.(Make-Bajaj, Philips, Wipro, Crompton) 7 Supply & fixing of street lights junction box made of SMC mterial complete with 4Way terminal block, cable gland etc. (as per UPPWD approved make list) 8 S&F of 6 Amp. to 32 Amp. SP MCB (10 KA) C Curve Cat.B(as per UPPWD approved make list) 9 Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect.(Make-Bajaj, Philips, Wipro, Crompton) 10 Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. With 5 years warantee Confirming to IP 66 protection complete in all respect. CAT- AA(Make-Bajaj, Philips, Wipro, Crompton) 11 Supply & fixing retro-reflective UPSIDA LOGO Plate Marking plate on Steel Pole including cost of clamp etc. as per technical specification enclosed.(as per UPPWD approved make list) 12 Supply & Fixing of 4.0 Mtr. long Decorative Ornamental Pole duly PU (Poly Urethane) Painted made of high tensile GI Steel Pipe. The Top section of pole must have Cast Aluminum Embellishments through out the length. Base Plate size 200x200x10mm with PCD of 200mm. Foundation bolts set of M16x450mmx 4 Nos made of EN8 grade steel should be used only for erection. A lockable door of suitable size should be provided at bottom section for termination and connection with backelite sheet and connector, MCB etc. on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P.Bottom dia-150mm up to 1200mm height from base plate. Top section dia-60mm & tolerance as per IS code or approved by engineer in charge. (Make-Bajaj, Philips, Wipro, Crompton) 13 Supply and fixing of decorative 40 to 45 Watt LED Post top indirect light luminaire having Pressure die cast aluminium body and Clear glass with driver set confirming to IP 65 and above protection complete inall respect with 5 years warantee. Technical specification, make & profile as approved by engineer in charge.CAT AA(Make-Bajaj, Philips, Wipro, Crompton) 14 Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 25 A TPN(as per UPPWD approved make list) 15 Supply and fixing of decorative 8 to 16 Watt LED bollard luminaire with driver set confirming to IP 65 protection complete in all respect.Technical specification, make & profile as approved by engineer in charge.CAT AA(as per UPPWD approved make list) 16 Supply, Installation, Testing and Commissioning of LED RGB/RGBW floodlighting luminaire for facade lighting with Die-cast aluminium housing, powder-coated finish, of following wattage. Luminaire shall be capable of producing dynamic color changing light for with16 million colors by DMX/Ethernet based control. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100-270 V AC, 50 Hz with power factor > 0.9 . Fixture shall be suitable to operate at an ambient temperature range of - 10°C to +50°C and shall be IP 65 and IK 06 rated. Lifetime shall be at least L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS (IS 10322) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required. with 5 years warranty. 110 W/115 W LED RGB/RGBW flood lights(Make-Bajaj, Philips, Wipro, Crompton) 17 Supply, Installation, Testing and Commissioning of LED RGB/RGBW floodlighting luminaire for facade lighting with Die-cast aluminium housing, powder-coated finish, of following wattage. Luminaire shall be capable of producing dynamic color changing light for with16 million colors by DMX/Ethernet based control. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100-270 V AC, 50 Hz with power factor > 0.9 . Fixture shall be suitable to operate at an ambient temperature range of - 10°C to +50°C and shall be IP 65 and IK 06 rated. Lifetime shall be at least L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS (IS 10322) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required. with 5 years warranty. 250 W W LED RGB/RGBW flood lights(Make-Bajaj, Philips, Wipro, Crompton) 18 Supply, Installation, Testing and Commissioning of LED RGB/RGBW floodlighting luminaire for facade lighting with Die-cast aluminium housing, powder-coated finish, of following wattage. Luminaire shall be capable of producing dynamic color changing light for with16 million colors by DMX/Ethernet based control. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100-270 V AC, 50 Hz with power factor > 0.9 . Fixture shall be suitable to operate at an ambient temperature range of - 10°C to +50°C and shall be IP 65 and IK 06 rated. Lifetime shall be at least L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS (IS 10322) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required. with 5 years warranty. 300 W/ 280 W W LED RGB/RGBW flood lights(Make-Bajaj, Philips, Wipro, Crompton) 19 Supply, Installation, Testing and Commissioning of LED RGB/RGBW Linear Wall Washer luminaire for Facade lighting with aluminium extruded housing, of following wattage. Luminaire shall be capable of producing dynamic color changing light with 16 million colors by DMX/Ethernet based control. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100 to 270 V AC, 50 Hz, power factor > 0.9 . Fixture shall be suitable to operate at ambient temperature range of -10°C to +50°C and shall be IP 65 and IK06 rated. Lifetime should be at least L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required. with 5 years warranty.25 Watt LED RGB/RGBW Linear Wall Washer(Make-Bajaj, Philips, Wipro, Crompton) 20 Supply, Installation, Testing and Commissioning of LED RGB/RGBW Linear Wall Washer luminaire for Facade lighting with aluminium extruded housing, of following wattage. Luminaire shall be capable of producing dynamic color changing light with 16 million colors by DMX/Ethernet based control. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100 to 270 V AC, 50 Hz, power factor > 0.9 . Fixture shall be suitable to operate at ambient temperature range of -10°C to +50°C and shall be IP 65 and IK06 rated. Lifetime should be at least L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required. with 5 years warranty.40 Watt LED RGB/RGBW Linear Wall Washer(Make-Bajaj, Philips, Wipro, Crompton) 21 Supply, Installation, Testing and Commissioning of LED RGB/RGBW Linear Wall Washer luminaire for Facade lighting with aluminium extruded housing, of following wattage. Luminaire shall be capable of producing dynamic color changing light with 16 million colors by DMX/Ethernet based control. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100 to 270 V AC, 50 Hz, power factor > 0.9 . Fixture shall be suitable to operate at ambient temperature range of -10°C to +50°C and shall be IP 65 and IK06 rated. Lifetime should be at least L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required. with 5 years warranty.70 Watt LED RGB/RGBW Linear Wall Washer(Make-Bajaj, Philips, Wipro, Crompton) 22 Surface mounted outdoor rated luminaire with multi directional beam made o pressure die cast and in anthracite finish. 12W Integrated LED luminaire with lumne output of 940 lumen in 3000K. (warranty 3 years against the Manufacturing Defect, date of Installation through Contractor ) with M.S. Cage for LED Lights(Make-Bajaj, Philips, Wipro, Crompton) 23 Supply, Installation testing and commissioning of Spike Light in 3W made of pressure die cast having IP 65 and IK 06 complies to IEC 60958, EMC standards. (warranty 3 Years against the Manufacturing defect, date of Installation through Contractor) with M.S. Cage for LED Lights(Make-Bajaj, Philips, Wipro, Crompton) 24 Supply and fixing and concealing of 25 mm dia 2 mm thick PVC conduit with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T&P etc required for proper completion of the work as per directions and to the satisfaction of Engineer in charge.(as per UPPWD approved make list) 25 Supply and fixing of PVC corrugated conduits of 25 mm outer dia mtr. on surface as sleeving including all labour, T&P etc. required for proper completion of work as per direction and satisfaction of Engineer in charge(as per UPPWD approved make list) 26 Construction of suitable foundation & M.S security structure cage for Façade LED Lights with the help of MS angle and bar including cost of all material, concrete work etc.(as per UPPWD approved make list) 27 Supply & Installation of Control Panel for Façade lighting with control cable & end termination.(as per UPPWD approved make list) 28 Supply,instalation ,estingnd Commissioningof 8 x 4MP Wi-Fi Camera - Motion/Human detection Auto tracking, Alarm, Pre-set, Cruise mode , Alexa Compatible, Bluetooth connectivity ,Battery backup, Built-in PIR sensor – Warranty 5 Years with Pole Mounting,1xNetwork Video Recorder (NVR) 5MP /8 Channel/H265+ compression/1 SATA/10 TB Storage,1x55 Display 24x7 350 Nits or higher,1x Firewall with 2 Year Support -10 User, 1xDlink 24 SFP ports + 2 10GBASE-T ports + 4 10G SFP+ ports, L3 Stackable Managed Switch, 1x3 KVA Online 15 min Battery Backup (Legrand/Vertiv ) , Network Cable , Connectors, Outdoor Cubical Rack(IP66) and other Associate Accessories complete in all respects.(as per UPPWD approved make list) 29 Annual Service Charges of Data SIM – for 8 Camera and 1 GBPS Broadband Data Connection (including Wifi Router & Acessories ) for control room at I.A. (as per UPPWD approved make list) 30 Supply, Installation and Operation of Outdoor Full LED Multi Colour Display Panels of Active display area of 19x9.47 ft. having Module of 160x90mm, Resolution 28x162mm, pixel pitch P6.6 , Receiving card Novastar or Colorlite, Pixel Configuration SMD2727, pixel density equel or below of 27777 dots cu. mtr, Aluminimun cabinet of 960x960x90mm-06 Nos with cooling fan., Avg Power Consumption-450 Wt/Sq.mtr, Max Power consumption 600-800 Wt/SQM, Screen size 6760mmx2880mm, Screen Resolution-486(w) x 1134(h),IP Rating (F/R)-IP67/IP65, Contrast ratio 2000:01, Refresh Rate (Hz)->1920, Colour Temp 2000K
