Tender For Comprehensive Repair /Maintenance Of Certain B/R Works In Md Accn Of Hawk Hill Under Area Of Age B/R-Ii At Ge Saugor- 1 Taking down chowkhat or frame (without taking off shutter from the frame)not exceeding 1.5 Square Metre each , removing from the site including Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed. 2 Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 sqm and not exc 4.00 sqm each , removing from the site Including Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed. 3 Taking down shutter of any description exceeding1.00 sqm but not exceeding 2 sqm each complete all as specified and directed. 4 Taking down and refixing of shutter of any description. Note : Refixing incl taking down easing and adjusting and also refxing builders hardware as reqd of any description exceeding1.00 sqm but not exceeding 2 sqm each complete all as specified and directed. 5 S&F steel window with side hung shutters with glazing bars devetailed or welded, fixed on and including pressed steel frame of size 80mm x 40mm x 1.25mm thick CRCA profile section with box type hinges, steel handle, steel peg stay etccomplete all as specified and directed. 6 S&F steel window with side hung shutters without glazing bars and fixed to steel frame complete all as specified and as directed. 7 S&F framed work such as grills gratings,sunshed cover fixed with nut bolts incl,cutting drilling holesetc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed baluster, walk ways, railings, framedwork or water tanks and similar work conforming to Fe 290Gde E 165 complete all as specified and directed. 8 S&F Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube, suppling & fixing in opening as per specification. 9 S&F factory made solid PVC moulded door shutterwith wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 5 mm thick moulded PVC sheet on the front face &5mm prelam PVC sheet on back face, supplying & fixing in frame at site as per specified. 10 S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixedwith 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frosted glass with rubber gasket and aluminium beading ,aluminium wire mess 0.36 mm dia and width of aperture 1.45mm to be fixed over louvers portion onlyincluding necessarycutting holes on wall and fixing arrangements complete all as directed by Engr-in- Charge (Al. section thickness 1.50 mm } 11 S&F aluminium windowssliding type three track powder coated consisting of frame bottom with gutter of sizemin 92.34 X 39 mm,sideand top of size min 92.34X29.70, shutters vertical 39X20 mm,shutter top &bottom of size min 20X39 mm ,shutter interlock min size 39X20 mm with rollers and conceled locking arrangements with 4 mm thick tintedglass with rubber gasket,brush and aluminium beading ,aluminium wire mess 0.36 mm dia and width of aperture 1.45 mmetcincluding necessarycutting holes on wall and floor and confirming to IS complete all as directed by Engr-in- Charge (Al. section thickness 1.50 mm } 12 S&F 105 mm X 60 mm sizepressed steel frames for door with one or morerebatesincluding necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxideprimerincluding M&L PCC 1:3:6 type C-0 using 12.5 mm graded store aggregate for filling in pressed steel frame complete all as specified and as directed 13 S&F 125 mm X 60 mm sizepressed steel frames for door with one or morerebatesincluding necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxideprimer M&L PCC 1:3:6 type C-0 using 12.5 mm graded store aggregate for filling in pressed steel frame complete all as specified and as directed 14 M&L second class hardwood in scantlings , timber clean sawn framed and fixed including dismantling unframed timber scantlings 40 sq. cm & over in section, in any position. .including preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer Complete all as specified and directed. 15 S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood facepanels, commercial type on both sides, including preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer Complete all as specified and directed. 16 S&F 2nd class HW factory made glazed and skeleton shutters 35 mm thickopen rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, cla-use 8.24 (a); for doors supplied and fitted to chowkats including preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer Complete all as specified and directed. 17 S&F 3mm thick, ordinary glass pin head type and glazing with oil putty in square not exceeding0.5 sqm in each panecomplete all as specified and directed. 18 S&F for 3 mm thickFigured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane.complete all as specified and directed. 19 S&F galvanised mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.45mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. 20 S&F for Extruded aluminium alloy handle of 150 mm size fabricatedtype, anodised complete all as specified.. 21 S&F for aluminium anodised barrel tower bolt of 150mmof extruded section complete all as specified. 22 S&F Butt hinges of 100 mm size, Medium weight, cold rolled mild steel and fixed. 23 S&F 100mmButt hinges, extruded aluminium aloy with galvanised mild steel hinge pin, anodised and fixed 24 S & Fdoor stopper of aluminium alloy body and tongue 150 mm long , anodised fixed in door with screws etc. 25 S&F 150 mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete. 26 S&F mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, Length of bolt 300 mm . complete all as specified and directed. 27 M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer all as specified and directed. 28 S&F in repairgalvanised mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.45mm and fixed with tinned tacks, or galvanised wire staplescomplete all as specified and directed. 29 S&F 3mm thick,ordinary glass pin head type and glazing with oil putty,silicone or wooden beads, in square not exceeding0.5 sqm in each pane including hacking out old broken glass of any thickness and any description from wooden/ steel frame/ stone,concrete or brick surrounds complete all as specified and directed. 30 M&L for 15 mm thick rendering in cement mortar (1:6) on brick / concrete/ stone surfaces finished even and smooth without using extra cement with including taking down of existing cement or cement lime plaster complete all as specified and as directed. 31 M&L for 15 mm thick rendering in cement mortar (1:4) on brick / concrete/ stone surfaces finished even and smooth without using extra cement with including taking down of existing cement or cement lime plaster complete all as specified and as directed. 32 M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement with including taking down of existing cement or cement lime plaster complete all as specified and as directed. 33 M &L for Brickwork with subclass Bbricks, straright or curved on plan exc 6m mean radius built in Cement mortar 1:6including demolition of brick work or rubbled stone masonry including all qoins arches , pillars etc built in cement mortar complete all as specified and directed. 34 M&L for 15 mm thick rendering in cement mortar (1:4) on brick / concrete/ stone surfaces finished even and smooth without using extra cement complete all as specified and as directed. 35 M&L for preparation of the newly plastered surfacesof wall & applying3 coats of white wash on wall surfaces complete all as specified and directed. 36 M & L for two coat of acrylic emulsion paint over a coat of 1mm thickBirla wall care putty on plastered surfaces on wall incl. preparation of surfaces complete all as specified and directed. 37 M&L for preparation of the newly plastered surfacesof ceiling & applying3 coats of white wash on ceiling surfaces complete all as specified and directed. 38 S&Fin repair 25mm dia stainless steelcurtain rod not less than 0.70mm thick including fixing of sufficient brackets ( minium 2 nos at every 1.50m length) & end Knobs complete all as specified and directed by Engr in Charge 39 S&F GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 15 mm diaGI tubing and connections complete all as specified and directed 40 S&FGI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 20mm diaGI tubing and connections complete all as specified and directed 41 Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed. 42 S&F in repair for 110mm dia PVC(SWR)pipes single socketed, in any length with rubber ring joints,fixed to walls complete all specified. 43 S&F in repairfor 75/90 mm dia PVC(SWR)pipes single socketed, in any length with rubber ring joints,fixed to walls. complete all as specified . 44 S&F in repair for 75/90 mm dia PVC(SWR)pipes single socketed, in any length with rubber ring joints,laid in trenches or in floors complete all as specified . 45 S&F in repairfor 110mm dia PVC(SWR)pipes bends any radious complete all as specified and directed. 46 S&F in reapir for 75 /90 mm dia PVC(SWR)pipes bends any radious. complete, complete all as specified and directed. 47 S&F in reapir for 110mm dia PVC(SWR)pipes bends with access door any radious complete all as specified and directed. 48 S&F in reapir for 75 / 90 mm dia PVC(SWR)pipes bends with access door any radious. complete, complete all as specified and directed. 49 S&F in reapir for 110mm dia PVC(SWR)pipes junction,single (single T/Y ) equal or unequal any radious.with acces door, complete all as specified and directed. 50 S&F in reapir for 110mm dia PVC(SWR) vent cowl, complete all as specified and directed. 51 M&L in repairfor 75 mm dia of out letPVC (SWR) floor trap plain withCP grating including jointing with solvent cement as in repair complete all specified. 52 S&F for in repairs15mm,pillar taps Fancy type long body chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with or without lettered hot or Cold with long srewed shanks and flynuts, srewedfor iron pipe complete all as specified . 53 S&F for in repairs 15mm angle cock chromium plated,cast copper alloy, with brass ceramic disc spindleand capston heads,scewed down high pressure, with or without lettered hot or Cold with long srewed shanks and flynuts, srewedfor iron pipe fixed and complete all as specified . 54 S&F for 15mm ,bib tapFancy type long body chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with or without lettered hot or Cold with long srewed shanks and flynuts, srewedfor iron pipe fixed in repair and complete all as specified 55 S&F for shower rose brass chromium plated without swivel joints, 100 mm in size including fixing to steel pipe complete all as specified and directed fixedin repairs, complete all as specified and directed. 56 S&F for in repairs for 15 mm Stop valve cast copper alloy screwed down high pressure with CAPSTON HEAD handle chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe 15mm bore or for unionscomplete all as specified and directed. 57 S&F for in repairs Brass CP WHB mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified. 58 S&F for in repairs Brass CP Wall mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified. 59 S&F for in repairsHeatth Faucet with one meter PVC flexible bodypipe of CPincluding fixing bracket, complete all as specified and directed. 60 S&F for in repairs Soap dish of CP fixed with pvc rawal plugs and screw, complete all as specified and directed. 61 S&F for in repair CP tubular towel rail D type 20mm dia and 60cm long complete all as specified and directed. 62 S&F for peg set of six S.S.fixed to wall with PVC plugs and screw, complete all as specified and directed. 63 Supply only15mm dia PVC connection with PTMT nuts of length 450 mm, complete all as specified and directed. 64 S&F for in repairs mild steel Chromium plated grating 100 mm dia, fixed in repair, complete all as specified and directed. 65 S&F Rotational moulded polyethylene water storage tanks capacity 500 litres(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, with and including 20mm Ball valves, high pressure of PTMTwith high density plastic bass screwed for iron pipe and fixed(min wt 20mm - 210 gms), including dismantling of old unserviceable Water tank and removing from site complete all as specified and directed. 66 S&F in repair PVC float valve assembly including assessories with float valve 20mm diacomplete all as specified and directed. 67 S&F for in repair gun metal globe /valve with iron wheel head screwed both ends for iron pipe of 20mm bore, complete all as specified and directed. 68 S&F in repair sinks with drainage board madeout of stainless steel 1 mm thick kitchen or laboratory with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall size 915 mm x 460 mm with bowl size410 mmx 330 mm x 160 mm complete all as specified and directed . 69 S&F for sinks madeout of stainless steel 1 mm thick kitchen or laboratory with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall size 495 mm x 420 mm with bowl size410 mmx 330 mm x 160 mm complete all as specified and directed fixed in repair. 70 Cutting holes in brick walls in cement mortar or cement lime mortar and stone wall built in lime mortarfor inserting holdfasts in exc. One brick but not exc. two brick walland making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 TypeB-1 as required. 71 S&F in repairBevelled edge looking mirror of size 600x450 selected quality glass mounted6mm thick AC building board or commercial plywood andfixed to wooden plug with chromium plated screws and cup washer all as specified & directed. 72 M&L for treatement for sunken portion is as follows :- (a) Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed.(b) M&L for water proofing plaster for sunken portionin CM 1:3, 20 mm thick in two coats with water proofing compound at the rate of 200 ml per 50 Kgof cement and finishing the surface even and smooth without using extra cement.(c) M&L for applying two coats of Dr fixit compound suitable for sunkun treatment as per manufacturer instructions over vertical surfaces and floors of sunken of toilet including cleaning of surfaces. (d) M&L for PCC 1:7:12 type D2 using 40 mm graded stone aggregate as in filling (sunken portion)(e) M&L for PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate, mixed with WPC @ 200ml per 50 kg of cement, as sub base, 75mm thick on top. Note :- Above quoted rate includes (a) Test again of water tightness by pounding for 72 hours & rectify defects if any till total elimination of defect.(b) The sunken portion shall be tested for leakage / seepage / dampness by ponding with water for 72 hours. In case any defect is noticed the portion shall be grouted with Dr fixit suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage / seepage / dampness is eliminated (c) Horizontalflat area to be measured. 73 S&F vitreous China wash down water closet (pedestal pattern) white (excludingflushing cistern and flush pipe) incl White Seat cover, including taking out old WC etc complete all as specified and directed. 74 M&L for vitreous china squatting pan, orissa pattern sise 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe to complete fixed in repairs and making good to floor, complete all as specified and directed. 75 S&F vitreous China WHB white flat back size 550x400mm with and including Supplied and fixed angle iron brackets, C.P pillar tap fency type 01 No 15mm bore, CP waste coupling, 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long high pressure, including taking out old WHB etc complete all as specified and directed. 76 S&F for in repair PVC valveless syphonic action type flushing cistern low level white with inlet ball valve,float end handle handle including bracket complete of capacity 10 litres, complete all as specified and directed. 77 M&L for non skidjoint free ceramic colouredtiles 7 to 8mm thick area of each tile exc 0.18 Sqm but not exc 0.38 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to matchlaid over and including 15mm thick screeed bed layer in CM (1:6), including dismantling offloor, hearth tiling including cement mortar beddingand removing of rubbish off the premises complete all as specified and directed. 78 M&L for non skid joint free ceramic colouredtiles 7 to 8mm thick area of each tile exc 0.18 Sqm but not exc 0.38 sqm in dado / skirting set and jointed in neat cement slurry and pointed in white or coloured cement to matchlaid over and including 10mm thick plaster in CM (1:4), including dismantling offloor, hearth tiling including cement mortar beddingand removing of rubbish off the premises complete all as specified and directed. 79 M&L for non skidjoint free ceramic colouredtiles 7 to 8mm thick area of each tile exc 0.11 Sqm but not exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to matchlaid over and including 15mm thick screeed bed layer in CM (1:6), including dismantling offloor, hearth tiling including cement mortar beddingand removing of rubbish off the premises complete all as specified and directed. 80 M&L for non skid joint free ceramic colouredtiles 7 to 8mm thick area of each tile exc 0.11 Sqm but not exc 0.18 sqm in dado / skirting set and jointed in neat cement slurry and pointed in white or coloured cement to matchlaid over and including 10mm thick plaster in CM (1:4), including dismantling offloor, hearth tiling including cement mortar beddingand removing of rubbish off the premises complete all as specified and directed. 81 M&Lfor glazed ceramic joint free coloured tiles on vetical surfaces size 600x300x7mm thick, over & including 15mm thick renderingin CM 1:4 set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade /colour of tiles,including dismantling offloor tiling including cement mortar beddingand removing of rubbish off the premises complete all as specified and directed. 82 M&L for coloured anti skid ceremic tiles 7 to 8 mm thickarea of each tiles exc. 0.06 sqm and n. exc. 0.11 sqmas in floor set &jointed in neat cement slurry and pointed in whitecement mixed with pigment to match over and including 15 mm thick screed bed in CM 1:6 complete, including dismantling offloor, hearth tiling including cement mortar beddingand removing of rubbish off the premises complete all as specified and directed. 83 M&L for 16 mm to 18 mm thick Granite slabof any shade( table rubbed and polished ) machine cut for vertical surface of pillars, floor /shelvesin steps, jambs, pillars, window cills& cooking plateforms over and including 20 mm thick screed bed or bedding layer of CM (1:3) including pointing in white/colourcement 1:2 using marble dust with admixture of pigment to match shade of the slabslaid bedded and pointed in any mortor complete and including dismantling of old Stone slabs /Kota stone/Tile of any description or thickness etc complete all as specified and directed. 84 M&L for75 mm thick PCC 1:3:6, C2 (40mm graded aggregate) as in plinth Protection finishing cement concrete surface even & smooth without using extra cement complete incl forming construction joint 10mm x 20mm filled with bitumen and coarse sand mortar, including demolition of old cement concrete in ground floors and pavings n exc 15cm below or above ground floor complete all as specified and directed. 85 M& L Cement concrete 1:4:8 Type D 2 (using 40 mm graded aggregate ,in foundations, filling and mass concrete, including demolition of old cement concrete in any description and any position, thickness n exc 15cm complete all as specified and directed. 86 M & L PCC (1:2:4) Type Bo using 12.5 mm graded stone aggregate as levelling course/mass concrete, including demolition of old cement concrete in any description and any position, thickness n exc 15cm complete all as specified and directed. 87 S&F for Mild steel TMT bars 10mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality. 88 S&F for Mild steel TMT bars 6mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality. 89 M&Lreinforced cement concrete type B1 (1:2:4) using 20 mm graded aggregate slab support on walls beams and columns in floors , roofs , landing balconies deck slab etc including demolition of old RCC slab of any thickness and in any position complete all as specified and directed. 90 M&L for precast reinforced cement concrete 1:2:4type B-1 using 20mm graded stone aggregate as in cover slab of manhole / drain cover set in cement mortar 1:4 including demolition of old RCC cover of any thickness and in any positioncomplete all as specified and directed. 91 M&L use and waste formwork to soffits of suspended slabs such as roof slabs , floor slabs , landings and similar works , not exceeding 200 mm thick ( horizontal or sloping ) including slab edges for rough finishedsurfaces of concretecomplete all as specified and directed 92 Material and labour in repair providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade chemically treatedwith aproved colour, design & pattern as in foothpath, parks, lawns, drive ways or light traffic parking etc. of required strenght, thickness & size / shape, , laid in required colour & pattern over and including 30 to 50mm thick uniformly levelled surface ofstone dust cushioning, , filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra cementincluding dismantling of old unserviceable tile complete all as specified and directed. 93 M&L fir cement concrete ( 1:2:4) type B-1 (20mm graded agrregate) in lintels upto 1.5m clear span, cills, stes, seimic and other similar bands, plinth course, string course, lacing cours, arapets and railingsupto 60cm in height, coping, kneelers, apex stones, bed plates, kerbs, water througs and the like including wheathering slightly rounded or chamfered angle and throating complete all as specified and directed. 94 S&F forin repair 18 mm thickmarine plywood board interior grade with 1mm thickwhite mica lamilation one side and 1mm thick coloured mica on another sideas in cupboard , shelve and shutter etc fixed with screws including Dismantling boarding any description fixed with nails in any position (including cup board shutter/shelve upto 25mm thick) complete all as specified and directed. 95 M&L for block board or marine plywood board for external teak wood lipping, 6mm thick, fixed with nails for 18/19mm thick marine plywood boards. 96 S&F for aluminium anodised barrel tower bolts of extruded section of 100mm size, complete all as specified and directed. 97 S&F for continuous (piano) hinges mild steel bright finish or electro galvanised width of width of flaps nexc 30 mm (when open), complete all as specified and directed. 98 S&F for extruded aluminium alloy handle of 100 mm size fabricatedtype, anodised.complete all as specified . 99 S&F for Hasp and staple safety type Aluminium anodised with MS hinge pin including bolt to hinge pin of 100 mm size sixed with screw complete all as specified . 100 S&F for magnate catcher of metal body and striking plate heavy duty includind fixed with screw, complete all as specified and directed. 101 M&L for one coat of white wash on old decorated surface of walls including preparation of old surface i.ebrooming down with steel wire brushes scraping downmoulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , craks etc and washing floors, cleaning glass , joinery , electric fitting, etcall as specified and directed. 102 M&L for one coat of white wash on old decorated surface of ceiling ncluding preparation of old surface i.ebrooming down with steel wire brushes scraping downmoulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , craks etc and washing floors, cleaning glass , joinery , electric fitting, etcall as specified and directed. 103 M&L for Two coat of white wash on old decorated surface of walls including preparation of old surface i.ebrooming down with steel wire brushes scraping downmoulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , craks etc and washing floors, cleaning glass , joinery , electric fitting, etcall as specified and directed. 104 M&L for one coat of paint on old decorated surface of walls with Acrylic emulsion incl preparation of surfacesi.e removing of nails, making good holes /craks with cement mortor etc and washing floors, cleaning glass , joinery , electric fitting washing rubbing down and stopping of distemper and painted surfaces complete all as specified and directed. 105 M&L for two coat of paint on old decorated surface of walls with Acrylic emulsion incl preparation of surfacesi.e removing of nails, making good holes /craks with cement mortor etc and washing floors, cleaning glass , joinery , electric fitting washing rubbing down and stopping of distemper and painted surfaces complete all as specified and directed. 106 M&L for complete removal of existing treatment and applyingBirla / J. K. wall care whiteputty 1mm thick in two layers for levelling the surfaces of walls and applying two coat of acrylic emulsionover and includinga coat of interiorprimer incl. preparation of surfaces ofwallscomplete all as specified and directed. 107 M&L for one coat of synthetic enamelled paint on old painted wood/wood based surface of any desription over 10cm width or girth incl preparation surfacessuch as removing all splashes, drops, dirt and leaving premises in a clean state complete all as specified and directed 108 M&L for one coat of synthetic enamelled paint on old painted steelbased surface of any desription over 10cm width or girth including preparation surfacessuch as removing all splashes, drops, dirt and leaving premises in a clean state complete all as specified and directed 109 Disconnecting existing water tanks, setting aside (or lowering if required) for Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc capacity of tankand reconnecting and refixing in position capacity of tank exc 250 and n.exc 500 ltr. complete all as specified and directed. 110 Disconnecting existing water tanks, setting aside (or lowering if required) for Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc capacity of tankand reconnecting and refixing in position capacity of tank exc 500 and n.exc 1000 ltr Complete all as specified and directed. 111 Taking downof oldroof treatment of any description including demolition of mud phushka, lime, concrete,tiles , cement plaster, padding upto 30cm depth from roof surfaces etc including cleaning, brushing and watering to joints and grooves and throwing the same to a distance exc 250 mtr and n exc 500 mtr from the roof of height 3 to 9 mheight etc and applying new water proofing roof treatment toRCC roof with approved modified membrane of weighing not less than 3kg/sqmcomprising with following items with and including materials and labour as under:-(i) The surface of roof,parpet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting.For cast iron drain outlets a groove shall be cut as specified and directed. A fillet of PCC (1:2:4) of 100x100mm shall be provided at all junctions of vertical and horizontal surfaces and wherever there is a change of dirction. The membrane should not be taken over at any steep turns and hence all corners/timers should be rounded.(ii) M&L rendering 10mm thick in cement mortar 1:4 mixed with and including water proofing compound @ 200ml per 50 kg bag of cement applied over roof slab.(iii) Oil based Bitumenprimer conforming to IS-3384-1986 @ 0.3 kgs per sqm to be applied on prepared surface till the surface is properly impregnated.(iv) Applyingone coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm(v) Laying of water proofing teratment of weight not less than 3 Kg / sqmAPP modified polymeric water proofing membrane composed of 100 micron (+10% ) high density polyethylene sheet ( HMHDPE) as center core, which is standwiched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps 75 mm and 100 mm as per manufacture instruction etc.(vi) Applyingone coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqmover the membrane. (vii) M&L for cool roof tiles 8-10mm thick 300mmX 300mm in size ( Make: orient or equivelent in other ceramic tiles) white/ plain in colour conforming to sun reflective Index (SRI) value minimum of 70to 80 over and including 15mm thick 1:3 Screed bed fixed with 3 mm spacers and jointsshall be filled with epoxy grout . 112 M & L forPCC ( 1: 2: 4) type B-0 using (12.5mm graded stone aggregate) etcon roof top as a leveling course / paddingto maintainthe slope,finished the surfaces even and smooth without using extra cement, including demolition of existing PCCetc complete all as specififed and directed. 113 Taking down carefully copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor etc complete all as specified and directed. 114 M&L for point wiring with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green complete all as specified and directed by Engineer-in-charge.Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. 115 For one light point or fan point controlled by one switch. 116 For one Call Bell point controlled by one push button switch. 117 For5Amp independent socket point controlled by one switch. 118 For one 3 pin ,5 Amp socket point with other switch on the same board. 119 M&L for power point wiring with 2.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green complete all as specified and directed by Engineer-in-charge.Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. 120 M&L for concealed point wiring with 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit,includingmodular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows,etc. all as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. 121 For one light point or fan point controlled by one switch. 122 For one Call Bell point controlled by one push button switch. 123 For5Amp independent socket point controlled by one switch. 124 For one 3 pin ,5 Amp socket point with other switch on the same board. 125 M&L for concealed power point wiring with 2.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit,includingmodular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows,etc. all as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 2.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green complete all as specified and as directed.Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. 126 S&F of Modular switch, one way,6 Amp 230, 1 module complete all as specified and directed . 127 S&F of modular socket 6 Amp-2/3 pin combined 2 module complete all as specified and directed . 128 S&F of Modular switch, one way,6 A/16 Amp 230, 1 module complete all as specified and directed. 129 S&F of modular socket 6 A/16-2/3 pin combined 2 module complete all as specified and directed. 130 S&F of Modular fan step regulator 120 Watt -2 module complete all as specified and directed . 131 S&F of Modular bell push 6A one module complete all as specified and directed. 132 S&F of switch piano type flush, single pole, one way 5 A 230 V complete all as specified and directed . 133 S&F of socket outlet, 5 pin, 5 Amp, flush type, 230 V complete all as specified and directed. 134 S&F of switch piano type flush, single pole, one way 15 A 230 V complete all as specified and directed. 135 S&F of socket outlet2 in 1,6 pin, 5/15 A, flush piano type240 V complete all as specified and directed . 136 S&F of ceiling rose, surface bakelite,three terminal complete all as specified and directed . 137 S&F of lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed. 138 S&F of bell ding dong 230 V, single phase complete all as specified and directed. 139 S&F of electronic double space rotary 5 speed type regulator 120-280 V complete all as specified and directed . 140 S&F of bell push flush type one way 5Amp 240 Volt complete all as specified and directed . 141 M&L for sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FRLS, 02 runs of01 Single core of size4 sqmm (for main current) drawn in & incl PVC Casing-n-caping of suitable size ISI markedwith all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of01 Single core of size 4 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green, incl. taking down old unserviceable sub main wiring complete all as specified and as directed.Note: (i) cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.(ii)Two runs of single core for main current and one run of single core for earth continuity conductor & one run of PVC Casing-n-caping shall be measured as one unit length. 142 M&L for surface conduitsub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size6 sqmm (for main current) drawn in & incl PVC casing -n-caping/pvc conduit of suitable size not less than 20mm diaISI markedwith all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green, incl. taking down old unserviceable sub main wiring complete all as specified and as directed.Note: (i) cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.(ii)Two runs of single core for main current and one run of single core for earth continuity conductor & one run of PVC casing -n-caping/pvc conduit shall be measured as one unit length. 143 S&F of testing and commissioning of MCB SP 240 volt 6 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs etccomplete all as specified and as directed. 144 S&F of testing and commissioning of MCB SPN 240 volt 16 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs etc complete all as specified and as directed. 145 S&F of sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar etc, including taking down existing DBcomplete all as specified and as directed.Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. 146 S&F of double door metallic sheet metal enclosure for DBdouble door(IP-42/43) When MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar etc, including taking down existing DB complete all as specified and as directed.Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. 147 S&F of LED Bulk head 9/10 watt designed for modern homes available in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and as directed. 148 S&F of TL fitting 20watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and as directed. 149 S&F in repairs LED light fitting mirror light with high output diffuser 2 feet, 10 watt 220 V AC decorativetype with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. 150 S&F single pole and neutral enclosure with two pin and earth plug and socket modular type complete with one single pole MCB SP 20 Amps flush mounting enclosure complete all as specified and as directed.
