Provision Of Associated Works For Gdcc At Afs Yelahanka- 1 Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and raming earth or broken rubble mixed with earth around in layers not exc 25 cm, watering and removing surplus soil to a distance not exc 50 m and making good surface as in soft/loose soil complete allvas specified and directed. 2 Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation for shafts, cills, cesspits, manhole pier holes n.exc 10Sqm on plan and getting out complete in any type of soil complete all as specified and directed. 3 Removing excavated soil material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as directed. 4 Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 CM complete all as specified and directed. 5 M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.Note : For payment purpose consolidated thickness will be considered and measured. 6 Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n.exc 4.00 Sqm each including cutting holes and making good required shape for hold fast block for new frame complete all as specified and directed. 7 M&L for plain cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in post complete all as specified and directed. 8 M&L for providing plain cement concretetype B1 1:2:4 (using 20 mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbswater troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed 9 S&F venetian blinds deco window blackout Jacquard Roller Blinds for Windows Room Darkening Roll-Up Shades Sun UV Protection Polyester Curtains for Home & Office complete all as specified and as directed. 10 M&L for dark shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but n exc 0.42 Sqm, in floors etc. set and jointed in neat cement slurry over and including 15 mm thick screed bed in CM 1:6, and pointed in coloured cement to match complete all as specified and as directed 11 M&L for dark shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but n exc 0.42 Sqm, as in dado/skirting etc. set and jointed in neat cement slurry over and including 10 mm thick plaster in CM 1:4, and pointed in coloured cement to match etc complete all as specified and as directed 12 M&L for cement plastering 10mm thick in cement mortar 1:6 on brick work or concrete surfaces and surface finished even and smooth without using extra cement complete all as specified and directed. 13 S&F PVC FALSE CEILING consisting of 600mm x 600mm, 5mm (±0.25) thick Plain embossedPVC sheetof Density 600 Kg /Cum Manufactured by an ISO-9001-2015 certified Company, used as panel insert in a frame work made using powder coated aluminum T- section of sizes 1” x1”( 25x25mm, 19 gauge or 1mm thick )in square pattern of grid sizes of 2’x2’( 600x600mm ). The aluminum framework is supported from the ceiling with the help of J hook and G.I. wire / 6mm M.S. rods of required sizes to maintain proper level etc. The aluminum framework is supported on side wall with the use of aluminum L-section of size 1”x1” (25x25mm) angles etc as per manufacturer specifications and drawing complete all as specified and directed. 14 M&L for precast cement concrete block type C1 1:3:6 masonry with solid blocks exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed. 15 S&F Three TRACK UPVC WINDOW of Size 1800 X 1200 MM of wall thickness 1.2 mm + .25. made out of extruded section plain UPVC sections. The Window Frame made out of Rigid UPVC sections meter cut at 4 Corners & joint with plastic fusion welding with internal reinforce required. The Shutter section made out of extruded Rigid UPVC with internal reinforced with provision of 5 MM glaze / wire mesh as per requirement. The Window shall be fixed to the wall using 65 X 100 MM long MS fasteners at suitable place provided for each vertical and horizontal member etc. complete as per manufactures specification and direction of Engineer-in-charge. 16 S&F 52mm thick PVC Partition consisting of 12mm thick plain solid PVC ply sheet reinforced with frame work made from 40mm x 20mm MS tubes. In between two MS tubes, 5mm thick Plain heat moulded C channel of size 75mmx50mm with feathered edges shall be fixed on the floor, wall and ceiling. Plastic ply panel shall be inserted in the PVC C channel. The first & last MS tube should be erected such that it is inside a PVC C channel, in between adjoining plastic panel, 5mm thick x75mm width plain PVC sheet feathered at edges shall be stick on the front &back face using solvent cement complete all as specified and directed. 17 M&L for 19mm thick one side pre-laminated particle boards, interior grade, pre-laminated one side with decorative choice lamination and other side balancing white lamination, fixed with screw to timber frame work in cup boards shutters / shelves or built in writing table complete all as specified and directed. 18 S & F Continuous (piano) hinges, mild steel, bright finish of 30mm width of flap or electro galvanized complete all as specified and directed. 19 S&F 100mm brass handles, cast type, polished bright complete all as specified and directed. 20 S&F Locks, drawer, grade I, size 50mm 2 levers complete all as specified and directed. 21 S&F stainless steel telescoping hinge for drawer 20mm wide complete all as specified and as directed. 22 Surface excavation n.exc 30 cm deep and averaging 15 cm deep in soft/loose soil & getting out including clearing all grass vegetation, saplings, shrubs, brush woods under growth roots and trees n.exc 30 cm girth complete all as specified and as directed. 23 M&L for Hard core of gauge n exc 63mm, deposited, spread and levelled inn layers n exc 15 cm thick, watered and rammed to true surface in Brocken stone or boulders complete all as specified and as directed. 24 M&L Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment complete all as specified. 25 M&L for plain cement concrete Type D2, 1:4:8 (40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. 26 M & L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. 27 M&L for applying 3 mm thick wall care putty on internal/external surfaces of walls/ceilings/soffits (as required for desired smoothness and levelling of surfaces in two or more layers) by using readymade wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting after complete removal of existing surface complete all as specified and directed. 28 M&L for applying 02 coats of plastic emulsion paint (light shade) by using roller/brush to wall surfaces over & including a coat of interior wall primer as recommended for under coat by manufacturer of interior emulsion complete all as specified and directed. 29 M&L for applying 02 coats of interior emulsion paint (light shade) @ 10 Sqm/litre/2 coats by using roller/brush to wall surfaces over & including a coat of interior wall primer @ 10 Sqm/Litre/1 Coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.Make of Interior Emulsion: Asian (TRACTOR) / Berger (BISON) Nerolac (BEAUTY SMOOTH) 30 S & F mild steel framed work as in doors or gates of angleor other section with gusset plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering, doors etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides ) and hanging also fastening and fixing complete conforming to Fe-410-W (Gde E-250 quality-A) complete all as specified and directed. 31 S & F mild steel rammed work Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed. 32 S&F mild steel screw bolts (machine made) of dia 11 to 15mm with hexagonal or square heads at one end and screwed the other , each screwed end to be fitted with washers and one hexagonal or square nut , n exc 5 cm long complete all as specified and directed. 33 Supply only mild steel chain link fencing made out of 3.15 mm dia galvanised iron wire of mesh of size 50mmx50mm made up to into mattress or cages complete all as specified and directed. 34 Fixing only mild steel chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire 35 S&F Galvanised, 2 strands, steel barbed wire 2.24 mm dia, barbed with 2mm dia, barbs at 75mm spacing as in fencing and straining and fixing to any type of standard rails/ straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc complete as specified and directed Note : Each line of wire to be measured separately 36 S&F galvanised mild steel concertina coil fencing of 600mm dia, centre to centre barbs distance 48mm, thickness of strip 0.5mm, length of barbs 10.5mm, Dia of spring wire 2.5mm, No. of spiral (No of turn) 50/51 per coil clip per spiral 5 Nos, weight not less than 8.50Kg/coil (recommended coil strech length 6 mtr) and conforming to IS and as per manufacturers instruction and laying and secured with barbed wire/iron angle by using necessary securing clips all as specified and directed.Note : Measurement taken on effective length of fencing and not length of coil. 37 M&L for preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 38 S&F mild steel round bars 10mm dia and over of Fe-410-W (Gde E-250) quality A or Fe 290 (Gde E-165), cut to length, bent to shape required, including cranking, bending for hooping as in securing bar complete all as specified. 39 S&F mild steel round bars 6 to 8 mm dia and over of Fe-410-W (Gde E-250) quality A or Fe 290 (Gde E-165), cut to length, bent to shape required, including cranking, bending for hooping as in securing bar complete all as specified. 40 M&L for RCC M-25 (Design Mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. 41 M&L for RCC M-25 (Design Mix) in Columns, pillars, piers, posts and struts as directed and directed 42 M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter and finished concrete flat complete all as specified and directed. 43 M&L for Formwork to sides of pillars, posts, struts, piers, columns, and stanchions and finished rough surfaces of concrete flat complete all directed. 44 M&L for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. 45 M & L for 15mm thick cement plaster in CM 1:4 on brick work or concrete surfaces and surface finished be even & smooth without using extra cement complete all as specified and directed. 46 Supply only integral liquid water proofing compound complete all as specified and directed. 47 M & L Preparation of newly plastered surfaces and applying two coats of cement base paint on walls including priming surfaces with alkali resistant priming paint etc complete all as specified and directed. 48 Point wiring completed with 1.5 sqmm single core PVCinsulated heavy duty ISI Marked unsheathed FRLScopper conductor cable 1100 volts grade with multistranded copper conductor drawn through concealed PVC conduit and including provision of PVC Insulated heavy duty ISI marked Unsheathed copper conductor,1.5 sqmm for earth continuity conductor and connected to common earth dolly, including suitable size of sheet metal box 1.6mm thickfixedand flushed inside thewalls, with 3mm thick laminated sheet top cover for housing the switches, socket outlets, fan regulators etc., for One light point controlled by one 5 amps switch complete all as specified and directed. 49 S&F switch piano 5 Amps flush type one way complete all as specified and directed. 50 S&F LED luminaire 600 mm x 600 mm, 35/36-watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. 51 S&F building security light LED street light fitting 35-Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP-66 protection complete all as specified and directed. 52 S&F sheet metal enclosures for MCB distribution board 230 Volts Single pole and neutral 4 way double door with 200 amps rated bus bar complete including flushing the DBs inside the wall and making good to the disturbed surfaces and also matching with the existing surface all as specified and directed. 53 S&F MCB SPN 32 Amps, 240 Volts, C Curve, 10 KA rupturing capacity complete all as specified and directed. 54 S&F MCB SP 6 to 32 Amps, 240 Volts, C Curve, 10 KA rupturing capacity complete all as specified and directed. 55 M & L for Earthing complete with galvanised earth plate electrode of size 600x600x6 mm thick buried directly in ground earth pit not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 mtrs below ground level connected to4 mm dia GI earth wire as earth lead upto a length of 7.5 metre long by means of bolts, nuts, washers etc. and protected by GI pipe light grade 15mm dia and 20mm dia GI tubing light grade with funnel for watering, all as shown in electrical plate No 3 of SSR Part-I, back-fill with salt and charcoal, provision of test point including connected to earth test point and necessary earth work excavation in any type of soil PCC (1:3:6) type C1 bed and chamber RCC (1:2:4) type B1, iron grill including GI cover with hinge and funnel watering pipe etc all as specified and directed.Note : If desired testing result is not acheived re-earthing shall be carried out by the contractor at no cost to the department. 56 Sub main wiringwithtwo runs of single corePVC insulated FRLS with copper conductormultistranded 1100 voltsgrade4 sqmm throughand including with suitable size of PVC conduit and itsaccessories, surface/ceiling alongwith fixing arrangement etc including one run of 4 sqmm PVC insulated multistranded copper earth continuity conductor and connected to common earth dolly complete all as specified and directed copper conductor cable as earth continuity conductor run along with PVC conduit complete all specified and directed .Note : 2 runs of cable and one run earth wire and conduit will be measured as one length. 57 Supply, install, testing and commissioning hi wall split units indoor/outdoor complete with cordless remote control unit and within built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity 1TR complete all specified and directed . 58 S&F Double pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB20 A complete all specified and directed. 59 Supply, fixing, jointing and testing copper tubing with nominal diameter 1/4 inch of suitable thickness for liquid line to connect without door unit complete all as specified and directed 60 Supply, fixing jointing and testing copper tubing with nominal dia meter 3/8 inch of suitable thickness including expanded polythene foam insulation for external insulation of suction line for connecting with outdoor condensing unit complete all as specified and directed 61 M&L for fabrication of base stand from MS angle iron of size 50mmx50mm, 6mm thick including necessary nuts, bolts & washers for mounting of outdoor unit of 1.5/2 TR capacity Split AC complete all as specified and directed 62 S&F PVC non-metallic flexible pipe of size 20mm dia alongwith fixing accessories such as saddles, pipe hook etc, for draining out the water from indoor unit complete all as specified and as directed 63 S & F 15 KVA 3 phase In-1 Phase Out Supreme Series-I Online UPS. Crest Factor 3.1 Max, Three Phase In , Single Phase Out UPS, Hot Standby (optional),Uninterrupted Pure power for Critical Applications, High Frequency Online UPS, High End IGBT Based, Automatic Battery Charging in UPS Mode , Shot Circuit Protection ,Wide range Input Voltage Selection , Advanced PFC Technology , 15 KVA Online UPS , Meantfor Indian and Harsh conditions, Double Conversion Low Frequency switching PWM, using IGBT modules complete all as specified and directed. 64 S&F 230 AH TUBULAR BATTERY for inverter with minimum 2 hrs back up capacity complete all as specified and directed. Model :-EXIDE INVA TUBULAR IT 850 230 AH TALL TUBULAR BATTERYor equivalent in Amaron/Luminous 65 S & F 10 KVA 3 phase In-1 Phase Out Supreme Series-I Online UPS. Crest Factor 3.1 Max, Three Phase In , Single Phase Out UPS, Hot Standby (optional),Uninterrupted Pure power for Critical Applications, High Frequency Online UPS, High End IGBT Based, Automatic Battery Charging in UPS Mode , Shot Circuit Protection ,Wide range Input Voltage Selection , Advanced PFC Technology , 15 KVA Online UPS , Meantfor Indian and Harsh conditions, Double Conversion Low Frequency switching PWM, using IGBT modules complete all as specified and directed by Engr-in-Charge. 66 Point wiring completed with 2.5 sqmm single core PVCinsulated heavy duty ISI Marked unsheathed FRLScopper conductor cable 1100 volts grade with multistranded copper conductor drawn through concealed PVC conduit and including provision of PVC Insulated heavy duty ISI marked unsheathed copper conductor,2.5 sqmm for earth continuity conductor and connected to common earth dolly, including suitable size of sheet metal box 1.6mm thickfixedand flushed inside thewalls, with 3mm thick laminated sheet top cover for housing the switches, socket outlets, fan regulators etc., for one6 pin 15 Amps socket outlet on independent board controlled by 15 Amps switch complete all as specified and directed 67 Supply and fix switch socket combination 3 pin 16 Amps multipin flush type complete all as specified and directed by Engr-in-Charge.
