Tender For Labour Work For E/O Of Ht, Lt Line And Transformer Erection/Replacement Work And Line Maintenance Work For Kamlabaug Sub Division City Area As Per Office Instruction As A Require Under City Division, Pgvcl, Porbandar.; 1 HT TAPPING FROM THE EXISTING POLE INCLUDING FIXING OF CROSS ARMS, CLAMPS ANTI-CLIMBING DEVICES, DANGER BOARD, INSULATORS ETC. COMPLETE AND PAINTING OF FABRICATED MATERIALS AND NUMBERING COMPLETE WITHCOST OF PAINTS AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING. NO. 343 2 ERECTION OF PSC POLES OF 8 MT./200 KG INCLUDING EXCAVATION OF PIT AND REFILLING OF EARTH, FIXING OF CROSS ARMS, TOP FITTING CLAMPS ANTICLIMBING DEVICES, INSULATORS ETC. COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING. NO. 830 3 ERECTION OF STEEL POLES OF 9 TO 11 METERS INCLUDING EXCAVATION OF PIT AND REFILLING OF EARTH, FIXING OF CROSS ARMS, TOP FITTING CLAMPS ANTICLIMBING DEVICES, DANGER BOARD, INSULATORS ETC. COMPLETE AND PAINTING OF STEEL POLE, FABRICATED MATERIALS USED ON THE POLE AND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET ANDEARTHING. NO. 1391 4 ERECTION OF STEEL POLE OF 13 METERS FOR RAILWAY CROSSING ON BG/MG/ NG LINE FOR 0.400/11/22KV OVERHEAD LINES I.E INCLUDING EXCAVATION OF PIT Et REFILLING OFEARTH, FIXING CROSS ARMS, TOP FITTING CLAMPS, ANTICLIMBING DEVICES DANGER BOARD, INSULATORS ETC. COMPLETE AND PAINTING OF STEEL POLES, FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COSTOF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING. NO. 1594 5 ERECTION OF DOUBLE POLE STRUCTURE OF 8 METERS 200 KG PSCDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING.POLES INCLUDING EXCAVATION OF PITS Et REFILLING OF EARTHING, FIXING OF CHANNELS, SUPPORTING ANGLES, CLAMPS, ANTICLIMBING DEVICES DANGER BOARDS, INSULATORS ETC. COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING.(WITHOUT AB SWITCH) NO. 1887 6 ERECTION OF DOUBLE POLE STRUCTURE OF 9 TO 11 METERS.5TEEL POLE INCLUDING EXCAVATION OF PITS Et REFILLING OF EARTH, FIXING OF CHANNELS, SUPPORTING ANGLES, CLAMPS, ANTICLIMBING DEVICES DANGER BOARDS, INSULATORS ETC. COMPLETE & PAINTING OF POLES,FABRICATED MATERIAL SUSED ON THE POLES AND NUMBERING WITH COST OF PAINTS AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.(WITHOUT AB SWITCH) NO. 2726 7 ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB SWITCH, HG FUSES OF 8 MTRS 200 KG PSC POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH, FIXING OF CHANNELS SUPPORTING ANGLES, CLAMPS, ANTI-CLIMBING DEVICES, DANGER BOARDS, INSULATORS, D0FUSES ETC. COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COSTOF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING OF ERECTION OF GUY SET AND EARTHING.(WITH AB SWITCH) NO. 2268 8 ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OFAB SWITCH, D0 FUSES, 9 TO 11 METERS STEEL POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH, FIXING OF CHANNEL, SUPPORTING ANGLES, CLAMPS, ANTI-CLIMBING DEVICES, DANGER BOARDS, INSULATORS, ETC. COMPLETE AND PAINTING OF POLES FABRICATED MATERIALS USED ONTHE POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.(WITH AB SWITCH) NO. 2976 9 ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING OF AB SWITCH, DO FUSES, TRANSFORMERS, LIGHTENING ARRESTORS, DISTRIBUTION BOX. OF 8 METERS 200 KG AND PSC POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH, CARTING OF TRANSFORMERS FROMSTORES TO SITE, FIXING OF CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS ARMS CLAMPS, ANTICLIMBING DEVICES ,DANGER BOARDS, CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USE ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING NO. 6474 10 ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF AB SWITCH, DO FUSES TRANSFORMERS, LIGHTENING ARRESTORS, DISTRIBUTION BOX 9 TO 11 METERS STEEL POLES INCLUDING EXCAVATION OF PITS Et REFILLING OF EARTH CARTING OF TRANSFORMERS FROM STORE TO SITE, FIXING OF CHANNELS SUPPORTING ANGLES, BRACING, CROSS ARMS, CLAMPS, ANTICLIMBING DEVICES, DANGER BOARDS, CONDUCTOR AND CABLE WIRING ETC. COMPLETE AND PAINTING OF POLES FABRICATED MATERIALS USED ON THEPOLES AND NUMBERING AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTIONS OF GUY SETS AND EARTHING. NO. 7569 11 ERECTION OF GUY SET INCLUDING EXCAVATION OF PITS & REFILLING OF EARTH AS PER STANDARD SPECIFICATION WITH STAY CLAMPS, STAY WIRE, ANCHOR ROD, TURN BUCKLE, EYE BOLT, GUY INSULATOR, CEMENT CONCRETE BLOCK ETC. BUT EXCLUDING CONCRETING NO. 400 12 CONCRETING OF POLES, GUYS, ETC. INCLUDING COST OF CEMENT SAND METAL (1:2:4) AND WATER ETC. AS PER STANDARD SPECIFICATION. CEMENT SHOULD BE OPC (53 GRADE) USED FOR CONCRETINGGUY INSULATOR, CEMENT CONCRETE BLOCK ETC. BUT EXCLUDING CONCRETING CMT 6151 13 ERECTION SPECIFICATION OF COIL TYPE EARTHING INCLUDING COST OF COAL SALT ETC. BUT WITHOUT COST OF GI WIRE AS PER STANDARD (20 KG SALT + 20 KG COAL) NO. 555 14 ERECTION OF PLATE TYPE EARTHING INCLUDING COST OF COA LSALT ETC. BUT WITHOUT COST OF GI WIRE AS PER STANDARD SPECIFICATION (20 KG SALT + 20 KG COAL) NO. 557 15 ERECTION OF STREET LIGHT FIXTURE COMPLETE WITH CLAMPS, BRASS NIPPLE, BRASS HOLDER TECK WOOD BUSH, REFLECTORS FUSE, WIRING ETC. AS PER STANDARD SPECIFICATION BUT EXCLUDING COST OF MATERIALS. NO. 256 16 STRINGING OF 30MM2 ACSR/34MM2,55MM2 AAAC CONDUCTOR FOR 11/22KV Et LT LINES INCLUDING FIXING OF INSULATORS, BINDING JUMPERING ETC. ONE COND. PER KM 1506 17 STRINGING OF GI WIRE 8 SWG INCLUDING BINDING JUMPERING ETC. ONE COND. PER KM 844 18 PROVIDING SINGLE PHASE SERVICE CONNECTION WITH PVC 2.5/4.0 MM2 TWIN CORE CABLE FROM TERMINAL POLE TO METERING POINT WITH METR EARTHING INCLUDING FIXING OF METER Et COMPLETE WORK AS PER STANDARD SPECIFICATION BUT EXCLUDING COST OF MATERIALS BUT INCLUDING COST OF JUSTI KHILA. NO. 283 19 PROVIDING THREE PHASE 4 WIRE SERVICE CONNECTION WITHPVC 4MM2/10MM2 FOUR CORE CABLE FROM TERMINAL POLETO METERING POINT INCLUDING FIXING OF METER Et COMPLETE WORK AS PER STANDARD SPECIFICATION BUT EXCLUDING COST OF MATERIALS BUT INCLUDING COST OF JUSTI KHILLAS, NUTS & BOLTS. NO. 390 20 ADDITIONAL COST FOR EXCAVATION OF PIT IN HARD ROCK AREA FOR ERECTION OF POLE/ GUY ETC. AS PER STANDARD SPECIFICATION OVER Et ABOVE NORMAL COST COVERED AGAINST EXCAVATION OF PIT UNDER NORMAL SOIL FOR ERECTION OF POLE, GUY, DOUBLE POLE STRUCTURE EARTHING WITH THE APPROVAL OF SUPDT. ENGINEER. NO. 256 21 PROVIDING GUARDING TO HT LINE ON ROAD/ RAIL CROSSING. MTR 50 22 PROVIDING GUARDING OF LT LINES ON ROAD/RAIL CROSSING. MTR 50 23 LT LINE TAPPING- SINGLE PHASE NO. 37 24 LT LINE TAPPING- THREE PHASE NO. 67 25 STRINGING/LAYING OF OVERHEAD LT CABLE FOR ROAD CROSSING,HT LINE CROSSING AND TELEPHONE LINE CROSSING ETC.(PER SPAN) PER SPAN 188 26 ERECTION OF SINGLE POLE STRUCTURES WITH DO FUSES, TRANSFORMERS, LIGHTENING ARRESTOR, DISTRIBUTION BOX. ON METERS 200 KG PSC POLE INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH, CARTING OF TRANSFORMERS FROM STORES TO SITE, FIXING OF CHANNELS, SUPPORTING ANGLES, BRACINGS CROSS ARMS CLAMPS, ANTICLIMBING DEVICES DANGER BOARDS, CONDUCTOR AND CABLE WIRING ETC. COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLE AND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING. NO. 3236 27 ERECTION OF SINGLE POLE STRUCTURES WITH MOUNTING OF AB SWITCH, DO FUSES, TRANSFORMERS, LIGHTENING ARRESTOR, DISTRIBUTION BOX. ON 9 TO 11 METERS RSJ POLE INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH, CARTING OF TRANSFORMERS FROM STORES TO SITE, FIXING OF CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS ARMS CLAMPS, ANTICLIMBING DEVICES DANGER BOARDS, CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLE AND NUMBERING AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING. NO. 3785 28 ERECTION OF SINGLE POLE STRUCTURES WITH, HG FUSES, TRANSFORMERS, LIGHTENING ARRESTOR, DISTRIBUTION BOX ON EXISTING 8 METERS 200 KG PSC POLE INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH, CARTING OF TRANSFORMERS FROM STORES TO SITE, FIXING OF CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS ARMS CLAMPS, ANTICLIMBING DEVICES DANGER BOARDS, CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLE AND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING. NO. 2106 29 ERECTION OF SINGLE POLE STRUCTURES WITH , HG FUSES, TRANSFORMERS, LIGHTENING ARRESTOR, DISTRIBUTION BOX ON EXISTING 9 TO 11 METERS RSJ POLE INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH, CARTING OF TRANSFORMERS FROM STORES TO SITE, FIXING OF CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS ARMS CLAMPS, ANTICLIMBING DEVICES DANGER BOARDS, CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLE AND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING NO. 2259 30 ERECTION OF PSC POLES OF 10 MT./270 KG INCLUDING EXCAVATION OF PIT AND REFILLING OF EARTH, FIXING OF CROSS ARMS, TOP FITTING CLAMPS, ANTI-CLIMBING DEVICES, INSULATORS ETC. COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING. NO. 1943 31 ERECTION OF DOUBLE POLE STRUCTURE OF 10 METERS 270 KG PSC POLES INCLUDING EXCAVATION OF PITS Et REFILLING OF EARTHING, FIXING OF CHANNELS, SUPPORTING ANGLES, CLAMPS, ANTI CLIMBING DEVICES DANGER BOARDS, INSULATORS ETC. COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING. NO. 4045 32 STRINGING OF 100MM2 ACSR/100MM2 AAAC CONDUCTOR FOR 11/22KV a LT LINES INCLUDING FIXING OF INSULATORS, BINDING JUMPERING ETC. ONE COND.PER KM 3469 33 STRINGING OF ABC OF FOLLOWING SIZES INCLUDING FITTING OF ALL ACCESSORIES I.E. SPECIAL DESIGN SUSPENSIION/TENSION CLAMP, FIXING OF CROSS ARM, LT SHACKLE INSULATOR & DIRECTED BY ENGINEER-IN-CHARGE. (I) 3X5OMM2+16MM2+1X35MM2 (I1)3X35MM2+16MM2+1X25MM2 MTR 25 34 STRINGING OF ABC OF FOLLOWING SIZES INCLUDING FITTING OF ALL ACCESSORIES I.E. SPECIAL DESIGN SUSPENSIION/TENSION CLAMP. FIXING OF CROSS ARM, LT SHACKLE INSULATOR, ETC. FOR FIXING OF MESSENGER WIRE COMPLETE, AS REQUIRED & DIRECTED BY ENGINEER-IN-CHARGE. (I) 1X35MM2 + 1X25MM2 MTR 12.5 35 STRINGING OF 11KV ABC OF FOLLOWING SIZES IN RURAL/URBAN AREA INCLUDING FIXING OF CROSS ARM, SPECIAL DESIGN SUSPENSION/TENSION CLAMP, BINDING TO PIN INSULATOR, PREPARING SHACKLE POINT JUMPERS ETC. AS REQUIRED AND DIRECTED BY ENGINEER-IN-CHARGE. (I) 3X95MM2+1X8OMM2 (11)3X70MM2 + 1X7OMM2 MTR 34 36 STRINGING OF ABC OF FOLLOWING SIZE INCLUDING FITTING OF ALL ACCESSORIES (I) 2C X 50 + 1C X 25 + 35 SQ. MM MTR 7.2 37 ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING OF AB SWITCH, HG FUSES, TRANSFORMERS, LIGHTENING ARRESTORS, DISTRIBUTION BOX OF 10 METERS 270 KG AND PSC POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH, CARTING OF TRANSFORMERS FROM STORES TO SITE, FIXING OF CHANNELS, SUPPORTING ANGLES, BRACINGS CROSS ARMS CLAMPS, ANTICLIMBING DEVICES DANGER BOARDS, CONDUCTOR AND CABLE WIRING ETC. COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING. NO. 7403 38 ERECTION OF DOUBLE POLE STRUCTURE FOR CTPT UNIT ( PSC POLE) (ERECTION OF DOUBLE POLE STRUCTURES WITH CTPT, LIGHTENING ARRESTORS, OF 8 METERS 200 KG AND PSC POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH, CARTING OF CTPT FROMSTORES TO SITE,FIXING OF CHANNELS, SUPPORTING ANGLES,BRACINGS CROSS ARMS CLAMPS, ANTICLIMBING DEVICES,DANGER BOARDS, CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USE ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING.) NO. 4578 39 ERECTION OF SINGLE POLE SHACKLE POINT ON PSC POLE 8 MT./200 KG. (ERECTION OF PSC POLES OF 8 MT./200 KG INCLUDING EXCAVATION OF PIT AND REFILLING OF EARTH, FIXING OF CROSS ARMS, TOP FITTING CLAMPS ANTICLIMBING DEVICES, INSULATORS ETC.COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING) NO. 898 Date: Sign & Stamp of the Bidder Executive Engineer PGVCL, City Division Office, Porbandar 40 ERECTION OF SINGLE POLE SHACKLE POINT ON STEEL POLE (9 TO 11 MTR) (ERECTION OF STEEL POLES OF 9 TO 11 METERS INCLUDING EXCAVATION OF PIT AND REFILLING OF EARTH, FIXING OF CROSSARMS, TOP FITTING CLAMPS ANTI-CLIMBING DEVICES, DANGERBOARD, INSULATORS ETC. COMPLETE AND PAINTING OF STEELPOLE, FABRICATED MATERIALS USED ON THE POLE ANDNUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATIONBUT EXCLUDING ERECTION OF GUY SET ANDEARTHING). NO. 1459 41 ERECTION OF SINGLE POLE SHACKLE POINT ON STEEL POLE (13 MTR) (ERECTION OF STEEL POLES OF 13 METERS INCLUDING EXCAVATION OF PIT AND REFILLING OF EARTH, FIXING OF CROSS ARMS, TOP FITTING CLAMPS ANTICLIMBING DEVICES, DANGER BOARD, INSULATORS ETC. COMPLETE AND PAINTING OF STEEL POLE, FABRICATED MATERIALS USED ON THE POLE AND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING) NO. 1662 42 ERECTION OF DOUBLE POLE STRUCTURE OF 13 MTR STEEL POLE (ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OFAB SWITCH, DO FUSES TRANSFORMERS, LIGHTENINGARRESTORS, DISTRIBUTION BOX 13 METERS STEEL POLES INCLUDING EXCAVATION OF PITS Et REFILLING OF EARTH CARTING OF TRANSFORMERS FROM STORE TO SITE, FIXING OF CHANNELS SUPPORTING ANGLES, BRACING, CROSS ARMS, CLAMPS, ANTICLIMBING DEVICES, DANGER BOARDS, CONDUCTOR AND CABLE WIRING ETC. COMPLETE AND PAINTING OF POLES FABRICATED MATERIALS USED ON THEPOLES AND NUMBERING AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTIONS OF GUY SETS AND EARTHING.) NO. 3391 43 ERECTION OF DOUBLE POLE STRUCTURE FOR CTPT UNIT (GIRDER POLE) (ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF CTPT, LIGHTEN INGARRESTORS, 9 TO 11 METERS STEEL POLESINCLUDING EXCAVATION OF PITS Et REFILLING OF EARTHCARTING OF CTPT FROM STORE TO SITE, FIXING OF CHANNELS SUPPORTING ANGLES, BRACING, CROSS ARMS, CLAMPS, ANTICLIMBING DEVICES, DANGER BOARDS, CONDUCTOR AND CABLE WIRING ETC. COMPLETE AND PAINTING OF POLES FABRICATED MATERIALS USED ON THEPOLES AND NUMBERING AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTIONS OF GUY SETS AND EARTHING.) NO. 5673 44 PROVIDING SINGLE PHASE SERVICE CONNECTION (FOR SOLAR GENERATION METER, HIGH RISE BUILDING, COMPLEX ETC.)WITH PVC 2.5/4.0 MM2 TWIN CORE CABLE FROM COMMON BUS BAR TO METERING POINT INCLUDING FIXING OF METER Et COMPLETE WORK AS PER STANDARD SPECIFICATION BUT EXCLUDING COST OF MATERIALS. NO. 100 45 PROVIDING THREE PHASE 4 WIRE SERVICE CONNECTIONS (FOR SOLAR GENERATION METER, HIGH RISE BUILDING, COMPLEX ETC.) WITH PVC 4MM2/10MM2 FOUR CORE CABLE FROM BUS BAR TO METERING POINT INCLUDING FIXING OF METER Et COMPLETE WORK AS PER STANDARD SPECIFICATION BUT EXCLUDING COST OF MATERIALS. NO. 131 RECOVERY PROPOSED FOR NOT PROVIDING AB SWITCH Et LT DISTRIBUTION BOX. 46 DURING THE ERECTION OF TRANSFORMER CENTER, IF AB SWITCH IS NOT PROVIDED THEN AMOUNT RS.833.00 SHALL BE RECOVER FROM THE BILL OF E/O TRANSFORMER CENTER OF CONTRACTOR. NO. 833 47 DURING THE ERECTION OF TRANSFORMER CENTER, IF LT DISTRIBUTION BOX IS NOT PROVIDED THEN AMOUNT RS.450.00 SHALL BE RECOVER FROM THE BILL OF E/O TRANSFORMER CENTER OF CONTRACTOR NO. 450 NOTE: 75% LABOUR CHARGE WILL BE DEDUCTED IF PAINTING IS NOT DONE. Annexure-2 Labour Rates For Maintenance Work Of HT Line.(Excluding Of GST) All Rates are with transportation charges / All material including - M.S. Nut-Bolts of all size will be supplied by PGVCL / Paints & Colour to be purchased by the contractors. HT -LINE MAINTENANCEWORK. Sr. No. Item Unit Rate for the Year 2022-23 1 Replacement of V-X-Arm with transportation, etc (+) Painting. Set 174 2 Straightening of tilted V-X -Arm & Top fitting / LT X-Arm/ Tapping Angle No. 62 3 Dismantling of Old V-X-Arm with Top fitting / LT X-Arm/ Tapping Angle from existing pole. Set 90 4 Fixing of V-X-Arm with Top / LT - X- Arm/ Tapping Angle on existing necked pole with colour Set 137 5 prefixing & Changing hight of V-X-Arm / LT-X-Arm / Tapping Angle Projection Brackets. No. 153 6 Dismantling of Old deteriorated/Broken/re-usable PSC Pole with all Fabrication - with crediting fabrication at field store and staking of pole safely on road side. No. 516 7 Dismantling Of Old Deteriorated/Broken/Re-Usable M.S .Girder Pole / Rail Pole / Tubular Pole With All Fabrication - With Crediting Fabrication At Field Store And Staking Of Pole Safely On Road Side. No. 756.80 8 Dismantling of Old deteriorated/Broken D.P. Structure set of PSC Poles Set 1145 9 Dismantling of Old re-usable D.P. Structure set of PSC Poles (if intact and re-usable) Set 1526 10 Dismantling Of Old Deteriorated/Broken/Re-Usable D.P. Structure Set Of M. S. Girder Poles Set 1679 11 Replacement Of 11 Kv Pin Insulator With Providing New Double Pin Bindings.(old pin rod should be credited to field store) No. 45.10 12 Replacement Of Old 11 Kv Pin Insulator By New 22 Kv Pin Insulator With Rod And Providing Double Pin Bindings And Check Nuts Etc. No. 60.50 13 Re-Pin Binding With Cleaning Of 11 Kv / 22 Kv Pin Insulator. No. 15.40 14 Replacement of old 11 KV Disc Insulator by New one with binding etc. No. 121 15 Providing 11 KV double disc insulator with binding etc. No. 118 16 Replacement of old jumpers and providing new D - type jumper on both side with 8 binding and PVC pipe etc. Per Pole 68 17 Replacement of existing ACSR. /all Allu. Conductor up to 55 mm2 by new one/ coated conductor with double pin binding including transportation and crediting to store etc. Per cond. Per Km 2442 18 Replacement of existing 11 KV conductor by 0.1 A.C.S.R./ AAAC DOG conductor with new double pin binding. Per cond. Per Km 3190 19 Re-stringing of 11 KV A.C.S.R./AAAC Conductor & L.T. Line conductor/ Coated conductor (All size) with new double pin binding between two location. 1 Wire per Span 79 20 Re-stringing of 11 KV Aerial Bunch Cable (All size) between two location. Per Span 236 21 Removal / Dismantling Of Ex. HT / LT Line Conductor (All Size) T 894 22 Straightening of tilted PSC Poles / Gurder Poles. No. 210 23 Dismantling of guy set comp. with rod (If possible) etc. Set 115 24 Re-tightning in all respect of loose guy set. Set 131 25 Providing new guy insulator and tightning of guy set / Repairing etc Set 153 26 Trimming / Cutting of tree branches of obstructing HT/LT Line on one tree. Per Tree 43 27 Cutting of bigger size of tree branches/ whole tree obstructing HT/LT Line. Per day Per Labour 341 28 Providing 11 KV projection brackets in place of old V-X- Arm Set 382 29 Providing H.T. / L.T. Proj. brackets (Combined) in place of ex. Old VX Arm / L.T. X-Arm etc. Set 535 30 Providing LT projection brackets in place of old L.T. X-Arm etc. Set 382 31 Dismantling of exist. HT / LT Proj. brackets. Set 183 32 Providing bracing angle set in ex. D.P. ( 4-Angles) Set 230 33 Straightening of tilted D.P. Set ( PSC / Gurder pole) etc with refilling of stones, morum etc. Set 598 34 Laying of 11 KV power cable from 70mm2 to 225mm2 with exaction of 3 Feet depth cable trench and refilling the same with providing bricks layers and refilling the same with sand / marrum up to ground level as per specification. Mtr 458 35 -do-, additional cable in same tranche with additional bricks for separating both cables Mtr 153 36 Re-activation of earthings of poles No. 382 37 Repairing and Providing HT / LT Guarding with Straightening of G.I. Wire & Providing Lacings at 1 Mtr Dist. As Per Specification With Using I - Rod Etc. Per Mtr. 20.90 38 Providing name of 11 KV FDR in Gujarati only on PSC / Girder Poles with providing back ground colour on poles with two coats of colour and size of letters to be 2 to 3 in approved ISI colour (Asian Apeolite, Three Mengo including all materials. No. 31 39 Providing Pole No with S/S code No, S/Dn Code No. / Fdrs Code No. / T.C. Code No. etc. with back ground colour and hight of letters to be 2 to 3 I.S.I. approved colour (A.A. 3 Mengo ) including all materials. No. 31 40 Providing New 11 KV A.B./ G.O. Switch with fabrications and insulated colour code jumpers / bindings lug etc. Set 833 41 Providing New 11 KV D.O. Fuse With Fabrication And Insulated Colour Code Jumpers / Binding / Lugs Etc. Set 825 42 Replacement of old 11 KV A.B. / G.O. Switch with providing new insulated colour code jumpers / bindings / lugs etc. Set 1216 43 Replacement of old 11 KV D.O. Fuse unit comp. No. 153 44 Providing C.C. ex. HT / LT Line Poles, Guy Sets etc as per sp. with all materials by contractors including cement in 1:2:4 Ratio as per sp it also includes excavation & relevant works and muffing. (Cement Should Be Opc (53 Grade ) Used For Concreting) Cmt 6151 45 Providing Muffing in stone masonry in cement mortar 1:5 for Xmers as per sp. with all materials by contractors including cement without excavation work. (Cement Should Be Opc (53 Grade ) Used For Concreting) Cmt 3358 46 Only colour work on ex. Items. ( 2 coats ) of red oxide colour and two coats of silver colours I.S.I. Asian Apcolite 3 mengo colour to be used. 47 V-X-Arm / Tapping Chennal or Angle with all fitting. No. 84 48 L.T. -X-ARM + -do- No. 65 49 H.T./L.T. Proj. brackets complete Set 222 50 H.T. Proj brackets Set 122 51 L.T. Proj. brackets Set 122 52 C Clamp No. 16 53 M. S. Girders 100x116 / Rail & Angle & Tubular Poles (9 to 13 Mtrs. Long) Excluding Fabricated Materials No. 811 54 M.S. Girders poles (150x150x11 to 13 Mtrs.) No. 1007 55 D.P. Structure + All fabrications. (PSC Poles)-without Bracing No. 260 56 D.P. Structure + All fabrications. (PSC Poles)-with bracing No. 488 57 do- Transformer Structure set - PSC/Girder Pole. Set 611 58 Providing of XLPE hard coating on 34 mm2 AAAC conductor with 3 mm coating. Km 6105 59 Providing of XLPE hard coating on 55 mm2 AAAC conductor with 3 mm coating. Km 9921 60 Cost of drum in which party will return the Hard Core XLPE coated conductor. No. 420 61 Straightening of Transformer Centre No. 598 62 HT ABC Dismantling (1)3x95mm2+1x80mm2 (2)3x70mm2+1x70mm2 Mtr 15 63 Erection of Naked PSC Poles of 8 Mt./200 KG No. 526 64 Erection of Naked Steel Poles of 9 to 11 Mtr No. 526 65 Erection of Naked Steel Poles of 13 Mtr No. 526 66 Fixing of Pin Insulator with Pin rod with binding No. 22.55 67 Fixing of Disc Insulator with H/W with Binding No. 54.55 68 Dismantling of Pin Insulator With Rod No. 22.55 69 Dismantling of Disc Insulator With H/W No. 60.50 70 Dismantling of DP Angle/Channel with all fabrication, insulating materials etc. and crediting in Field/Divisional Store. No. 188.00 71 Fixing of L Top No. 35.00 72 Re-Fixing of Top fitting in Proper position No. 30.00 73 Replacement of Top Fitting No. 37.00 74 Refitting of LA No. 23.00 75 Converting pin point to Shackle Point including Dismantling & restringing etc. Location 1635.00 76 Plumbing of PSC pole with straightening at tension point No. 273.00 77 Carting of PSC Pole at Destination more than 5 Kms with prior approval of EE of Division No. 324.00 78 Patrolling of LT/HT Line & Submission of Summary Report Per Pole 3.00 79 Untie the kintting of the old AB Cable Mtr 15.00 80 D Type Jumper Per Pole 68.00 81 Replacement of D. O. Fuse Set 920.00 82 Burning of Thread of LT/HT line including cost of oil bamboo etc. Span 52.00
