Tender For Certain Repair To Wooden And Steel Furniture At Mffr; 1 REPAIR TO BED HARD WITH PLY TOP ( FD-246/247) :S&F in replacement of unserviceable top of bed Hard Plytop/Newar to be made of 12mm thick (7 Ply) commercial plywood, BWR grade, confirming to IS-303-1989 and ISI marked and to be fixed with 25mm long steel screw without having any joints, Make of ply :Kit Ply/Green ply/Century shape and size as per Drg complete all as specified and directed. 2 S&F in replacement of unserviceable long rail shall be First class hardwood well seasoned teak wood free from cracks and dead knots, shape and size, all as on Drg complete all as specified and as directed. 3 All as per serial item No. 1.01 here-in-before but short rail/stiffener complete all as specified and directed. 4 HEAD REST : Unserviceable ply to be replaced by 3mm thick ply wood both sides of Head Board one side teak faced and other side commercial plywood BWR grade general purpose type confirming to IS-303-1989 and ISI marked including teak wood beading all around and 1/2 cut 12mm dia beading made to shape as shown on Drg or complete all as specified and directed. 5 FOOT REST : All as per serial item No. 1.03 here-in-before but foot rest complete all as specified and directed. 6 HEAD REST : Dismantling of unserviceable Head rest of Bed ply top, S&F new Head rest complete (well finished with polishing) of bed ply top alongwith MS angle strip of size 4x4x6mm, suitable type of MS screws and as shown on drawing complete all as specified and directed. 7 FOOT REST : All as per serial item No. 1.05 here-in-before but foot rest complete all as specified and directed. 8 S&F MS Corner bracket in right angled shape of size 4x4, 6mm thick with Six holesduly painted with black enamel paint after applying one coat of red oxide primer with suitable MS Screws to the bed complete all as specified and directed. 9 M&L for removing the existing broken or unserviceable components of wooden furniture items as given below from serial item No. 3.00 to 5.00 here-in-before including preparation, S&F New Ist class hard wood well seasoned teakwood free from cracks and dead knots including two coats of french polish to all replaced components complete to match the original all as specified in drawings complete all as specified and directed. 10 REPAIR TO TABLE PEG (FD-277/FD-384)Removing of unserviceable top of table in any positon, S&F new top made out of 18/19mm thick Exterior grade Prelaminated MDF board of approved shade Make : Action Tesa/ Novapan/ Green Panel Max (ISI Marked) duly post-formed (PFT) including tightening of loose joints of existing frame before fixing the top shape and size all as specified on drawing and complete all as specified and directed. 11 Long rail made of 1st class hard wood (Teak wood) as specifid in drawing. 12 Short rail made of 1st class hard wood (Teak wood) as specifid in drawing. 13 Legs made of 1st class hard wood (Teak wood) as specifid in drawing. 14 Centre/Side stiffener made of 1st class hard wood (Teak wood) as specifid in drawing. 15 REPAIR TO TABLE DINING 06 PERSONS (FD-273/FD-376)Removing of unserviceable top of table in any positon, S&F new top made out of 18/19mm thick Exterior grade MDF board of approved shade Make : Action Tesa/ Novapan/ Green Panel Max (ISI Marked) duly post-formed (PFT) including tightening of loose joints of existing frame before fixing the top shape and size all as specified on drawing and complete all as specified and directed. 16 Long rail made of 1st class hard wood (Teak wood) as specifid in drawing. 17 Short rail made of 1st class hard wood (Teak wood) as specifid in drawing. 18 Legs made of 1st class hard wood (Teak wood) as specifid in drawing. 19 REPAIR TO TABLE WRITING (FD-275)Removing of unserviceable top of table in any positon, S&F new top made out of 18/19mm thick Exterior grade MDF board of approved shade Make : Action Tesa/ Novapan/ Green Panel Max (ISI Marked) duly post-formed (PFT) including tightening of loose joints of existing frame before fixing the top shape and size all as specified on drawing and complete all as specified and directed. 20 Legs rail made of 1st class hard wood (Teak wood) as specifid in drawing. 21 Side/Bottom rail made of 1st class hard wood (Teak wood) as specifid in drawing. 22 Front/Back rail made of 1st class hard wood (Teak wood) as specifid in drawing. 23 Centre Stiffener made of 1st class hard wood (Teak wood) as specifid in drawing. 24 S&F in repair shutters to be made of 18mm thick prelaminted MDF board of exterior grade edging all around with PVC beading of 2mm thick with piano type hinges/MS Hinges with approved SS knob/Handle all as specified on drawing and complete all as specified and directed. 25 S&F drawer to be made of sides and back of 12mm thick teakwood Plank, bottom of 6mm thick commercial plywood, Front of 18mm thick prelaminated exterior grade MDF board whatever shown on drg including SS knobs/Handles as approved by BSO as specified on drawing and complete all as specified and directed. 26 S&F in replacement of unserviceable back ply shall be 6mm commercial ply BWR of size as existing as specified on drawing and complete all as specified and directed. 27 S&F New Cabinet to be made of 18mm thick prelaminted MDF board of exterior grade for housing drawers & partition with shutter as per drawing and as directed. 28 Supply and fixing in replacement foam cushion (ISI Marked IS-1741) (Make : Sleep Well/ Kurl-On (Komfort Universe - Goldline) 10 Nos in each set for sofa 3 Pieces, 5 seater. Size of cushion 22x21x4 thick foam of 40 density for seat & back covered with superior quality tapestry cloth as approved by BSO. NOTE: The foam cushion in original packing with warranty cardand tapestry cover (with zip opening system) shall be brought seperately at furniture yard and after inspection the same shall be fixed. 29 REPAIR TO CHARPOY IP WITH HARD TOP (FD/MAP-II/01)Removing of old unserviceable ply top from existing charpoyand S&F the new 12mm thickBWRcommercial plywood with unpolished edging(ISI marked) suitable for charpoyhaving approximante size 1980mm x 900mmx12mm with mild steel galvanised iron nuts and bolts with GI washer (Heavy Weight) complete including tightening of loose joints with gas welding of existing frame before fixing the ply all as per drawing complete all as specified and directed.Make of Plywood :- Green ply/Kit Ply/Century PlyNote :- (i) Cost of minor repair like welding to frame if required etc is deemed to be included in the quoted rate.(ii) Cost of all type nut bolts and washers of the charpoy IP to be included in the quoted rate. 30 Repairs of damaged parts, scraping of existing coat of paints filing, finishing and painting of Charpoy IP with two coats of synthetic enamel paint of approved shade (Make : Berger/AsianPaint) including preparation of surface complete all as specified and directed. 31 S&F Hard PVC shoe of best quality complete all as specified and directed. 32 REPAIR TO CHARPOY GI PIPE WITH PLYWOOD TOP (FD-220)S&F 12mm thick plywood commercial type BWR grade size 1950mmx900mmx12mm thick (in one piece only) as top of the charpoy GI Pipe with mild steel Screw bolt (Machine made) of size 75mm long, 6mm thick with hexagonal or square head at one end and screw the other with washer, including removal of old unserviceable ply top complete all as per specified and directed.Notes :- (i) The above mentioned size of plywood is firm and no tolerance in size, thickness etc shall be accepted. (ii) Plywood shall be provided in single piece in each Charpoy. (iii)Purchase voucher of plywood shall be obtained by the contractor from authorised dealer/manufacturer and shall be submitted to Engineer-in-Charge. 33 Drg No. FD-220M&L for removing of old unserviceable long rail of Charpoy GI pipe and supply and fixing new long rail made out of GI tubing 32mm bore, medium grade, ISI Marked, 1980mm long, duly continuous welded properly at both ends as per best trade practice complete all as specified, shown on drawings and as directed. Make : Jindal/Prakash Surya/Tata/BSTNotes :- (i) Welding of new rail shall be as per best trade practice with continuous welding and as approved by GE. (ii) Unit for measurement of this item is ‘Each Job’ which shall comprise of removing of one old long rail and supply and fixing of one new long rail in lieu. 34 Drg No. FD-220Dismantling carefully unserviceable short rail of Charpoy GI pipe and replacement by short rail made out from old long rail GI pipe retrieved under serial item No. 8.01 here-in-before, including threading at both ends complete all as specified, shown on drawings and as directed.Notes :- (i) Unit for measurement of this item is ‘Each Job’ which shall comprise of removing of one old short rail and fixing of one short rail in lieu made out of old long rail. (iii) The rate quoted for this item shall include for making of short rail by cutting from old long rail in appropriate size. 35 Drg No. FD-220Dismantling carefully unserviceable leg of Charpoy GI pipe and replacement by leg made out from old short rail GI pipe retrieved under serial item No. 8.02 here-in-before, including cutthing and threading at single ends & including supply & fixing mild steel 3mm thick & 55mm dia plate to the bottom of leg duly continuous welded and painted as per best trade practice complete all as specified, shown on drawings and as directed.Notes :- (i) Welding of leg shall be as per best trade practice with continuous welding and as approved by GE. (ii) Unit for measurement of this item is ‘Each Job’ which shall comprise of removing of one old leg and fixing of one leg in lieu made out of old short rail. (iii) The rate quoted for this item shall include for making of leg by cutting from old short rail in appropriate size. 36 Drg No. FD-220Supply & fixing in position GI 3 way elbow 32mm bore, medium grade (‘B’ Class), ISI marked all as per sample available in BSOs Yard in Charpoy GI pipe including dismantling & taking out carefully old unserviceable GI 3 way elbow 32mm bore complete all as specified, shown on drawings and as directed. 37 Drg No. FD-220Supply & fixing in position GI check nut 6mm thick 32mm bore, medium grade (‘B’ Class), ISI marked all as per sample available in BSOs Yard in Charpoy GI pipe including dismantling & taking out carefully old unserviceable GI check nut complete all as specified, shown on drawings and as directed. 38 Drg No. FD-220S&F MS Iron Strips 08 Nos of size 50mmx6mm, 75mm long duly holed/ drilled for tightening plywood and strip with countersunk screws/ suitable nuts, bolts and washers and welded to rails of charpoy each side 02 Nos strips including two coats of synthetic enamel paint over a coat of red oxide/primer complete all as directed.Note : One Number of MS flat iron strip 50mmx6mmx75mm long is measured as one unit. 39 Drg No. FD-220S&F flat MS iron 02 Nos of size 50mmx6mm thick, 900mm long providing 02 Nos of holes/drilled in each flat iron for tightening plywood on flat iron along with long rail with countersunk screws/suitable nuts & bolts with washers on both sides of flat MS iron and including preparation of surface and applying two coats of synthetic enamel paint over a coat of red oxide/primer, complete all as directed.Note : One Number of MS flat iron strip 50mmx6mmx900mm long is measured as one unit. 40 REPAIR TO BED HARD PLY STEEL {FD/E6/MAP/08(R)}S&F in replacement of unserviceable top of bed hard steel to be made of 12mm thick (7 Ply) commercial plywood BWR grade, confirming to IS 303-1989 and ISI marked and to be fixed with appropriate sizes of SS nuts & boltswith washers without having any joints after tightening of frame by welding, shape and size as per drawing and as directed.Make of Plywood :- Green ply/Kit Ply/Century Ply/ArchidNote:- Cost of minor repair like welding to frame if required etc is deemed to be included in the quoted rate. 41 REPAIR TO HEAD BOARD : Removing of unserviceable board of head rest and S&F new board of Head rest to be made of 18mm thick Exterior grade prelaminated MDF board of approved shade duly covered with PVC beading 2mm thick all around with suitable screws with the cleats as specified on drg and as directed.Make : Action Tesa/Novapan/Green Pannel Max. 42 REPAIR TO FOOT BOARD : All as per serial item No. 9.01 here-in-before but for foot board as specified on drawing and as directed. 43 M&L for scraping of existing coat of paints complete filling, finishing and painting of Bed Hard steel with two coats of synthetic enamel paint of approved shade (Make: Berger/ Asian Paint) with spray after applying a coat of red oxide primer and as directed. 44 S&F PVC hard rubber shoe of best quality complete all as specified and directed. 45 REPAIR TO LOCKER BED SIDE STEEL {FD-1029/FD-54(M)}M&L for dismentling of existing unserviceable Handles and S&F new handles CP steel 75mm long with suitable stainless steel screws of approved quality complete all as specified and directed 46 M&L for dismentling of existing unserviceable Hasp and Stapple and S&F new Hasp & staple of size 75x40x3mm thick stainless steel with suitable bolt and nuts complete all as specified and directed. 47 M&L for dismentling of existing unserviceable legs and S&F of new bottom legs duly painted with two coats of synthetic enamel paint of existing color over a coat of red oxide primer be of 1mm thick PBI sheet by welding and finishing with mild grinding as per drawing complete all as specified and as directed. 48 Dismentling of unserviceable locking assembly with complete mechanism and S&F new MS locking assembly with base plate (complete mechanism) with upper and lower bars with brass lock as shown in drawing or as directed. 49 Denting/bending/welding, repairs of damaged parts, fixing loose shelves and complete removal of existing coat of paints filling, finishing and painting of locker steel with two coats of synthetic enamel paint in single shade as approved (Make: Berger/ Asian Paint) with spray after applying coat of red oxide primer as directed. 50 Denting/bending/welding, repairs of damaged parts, fixing loose shelves and complete removal of existing coat of paints filling, finishing and painting of locker steel with two coats of synthetic enamel paintin dual shade as approved(Make: Berger/ Asian Paint) with sprayafter applying coat of red oxide primer as directed. 51 REPAIR TO ALMIRAH MED STEEL (FD-1032/87M)Dismentling of unserviceable bottom legs, S&F of new bottom legs duly painted with two coats of synthetic enamel paint of existing color over a coat of red oxide primer be of 1 mm thick PBI sheet by welding and finishing with mild grinding and as directed. 52 S&F shelves made of 1 mm thick MS sheet duly painted shape and size as specified on drawing. 53 Dismentling of unserviceablelocking assembly with complete mechanism and S&F new MS locking assembly with base plate (complete mechanism) with upper and lower bars with brass lock as shown in drg or as directed. 54 Denting/bending/welding, repairs of damaged parts, fixing loose shelves, scraping and complete removal of existing coat of paints filling, finishing and painting of Almirah medium steel with two coats of synthetic enamel paint in dual shade of approved color (Make: Berger/ Asian Paint) with spray after applying a coat of red oxide primer and as directed. 55 REPAIR TO ALMIRAH LARGE STEEL WITH SHELVES (FD-1031)Dismentling of unserviceable bottom legs, S&F of new bottom legs duly painted with two coats of synthetic enamel paint of existing color over a coat of red oxideprimer be of 1 mm thick PBI sheet by welding and finishing with mild griding and as directed. 56 S&F shelves made of 1 mm thick MS sheet duly painted shape and size all as specified on drawing. 57 Dismentling of unserviceablelocking assembly with complete mechanism and S&F new MS locking assembly with base plate (complete mechanism) with upper and lower bars with brass lock as shown in drg or as directed. 58 Denting/bending/welding, repairs of damaged parts,fixing loose shelves, scraping and complete removal of existing coat of paints filling, finishing and painting of Almirah Large steel with two coats of synthetic enamel paint in dual shade of approved color (Make: Berger/ Asian Paint) with spray after applying a coat of red oxide primer and as directed. 59 M&L for dismentling ofof existing unserviceable MS Butt Hinges & S&F new MS Butt Hinges with suitable MS screws as per specification and as per drawing 75mm long of approved pattern complete for serial item No. 10.00, 11.00 & 12.00 complete all as specified and directed. 60 Dismentling of existing unserviceable CP handles and S&F CP handles of approved quality in Godrej Pattern for serial item No. 10.00, 11.00 & 12.00 complete as specified and approved by BSO/GE. 61 Dismentling of unservicable locks of Almirah Med/Large with shelves/Locker Steel (TP) and S&F new locks of approved make as specified and shown in drawing. 62 S&F of cleats shall be made of 2 mm thick MS made to shape and fix in the Almirah to support the shelves for serial items No. 11.00 & 12.00 complete all as directed 63 Dismentling of unserviceable bushes of locking assembly of serial item No. 10.00, 11.00 & 12.00 and S&F new MS bushes of locking assembly complete all as directed. 64 REPAIR TO CHAIR WRITING (FD/E6/MAP/12)/CHAIR VISITORS(TP)Labour for removing the existing wornout/ unserviceable seat of chair Writing and S&F new seat frame of size 500x450mm made from 12mm thick Hot pressed Plywood with moulded polyurethane foam 50mm thick with density 50-55 Kg per cubic metre, duly upholstered with fabric of approved quality and shade, duly stitched with PVC lipping all round after tightening the existing frame by welding complete all as directed. 65 All as per serial item No. 18.00 here-in-before but for Back of Chair Writing of size 500x450mm as shown in drawing complete all as specified and directed. 66 Labour for removing the existing wornout/ unserviceable seat cover of chair Writing and S&F new seat cover of size 500x450mm made from fabric of approved quality and shade, duly stitched with PVC lipping all round after tightening the existing frame by welding complete all as directed. 67 All as per serial item No. 18.02 here-in-before but for Back of Chair Writing of size 500x450mm as shown in drawing complete all as specified and directed. 68 S&F Rubber Stoppers with appropriate size of MS screws complete all as specified and directed. 69 S&F iron strip on seat or back as per existing shape and size with suitable nuts and bolts complete all as specified and directed. 70 Removing of unserviceable arms in any position, S&F new armswith nuts and bolts as per drg complete all as specified and directed. 71 S&F with welding base plate duly black painted of existing shape and size of arms complete all as specified and directed. 72 Labour for scrapping down the old painted steel surface for carrying out repairs and filling with putty to obtain even surfaces applying primer to surfaces and applying two coats of synthetic enamel paint of approved shade by BSO/GE over one coat of red oxide primer by spraying machine complete all as specified and directed. 73 REPAIR TO TABLE OFFICE CLERK STEEL (FD-381/FD-1004)Removing of unserviceable top of table in any positon, S&F new top made out of 18/19mm thick Ext grade Prelaminated MDF board of approved shade Make : Action Tesa/Novapan/Green Pannel MaxAction Tesa/Novapan/Green Pannel Max (ISI Marked) duly post-formed (PFT) including welding of loose joints of existing frame before fixing the top. shape and size all as specified on drawing and as directed. 74 S&F New drawers with appropriate size of sheet as existing, with locking device as per drawing complete all as specified and as directed. 75 S&F New drawers with appropriate size of sheet as existing as per drawing complete all as specified and as directed. 76 Denting/bending/welding repair of broken joints, making all drawers of table functional and removing of existing coat of paint on steel parts by scraping, filling and repaintingtwo coats of synthetic enamel paint in dual shade (Make: Berger/ Asian Paint) using sprayafter giving a primer coat with red oxide as per speciaification and as shown on drawing and directed. 77 REPAIR TO TABLE OFFICE OFFICER STEEL (FD-1002)Removing of unserviceable top of table in any positon, S&F new top made out of 18/19mm thick Exterior grade MDF board of approved shade Make : Action Tesa/ Novapan/ Green Pannel Max (ISI Marked) duly post-formed (PFT) including welding of loose joints of existing frame before fixing the top, shape and size all as specified on drg and as directed. 78 S&F New drawers with appropriate size of sheet as existing, with locking device as per drawing complete all as specified and as directed. 79 S&F New drawers with appropriate size of sheet as existing, as per drawing complete all as specified and as directed. 80 Dismentling of existing unserviceable shutter of Table and S&F new shutter fitted with locking device & MS butt hinges as per drawing complete all as specified and as directed. 81 Denting/bending/rewelding Repairs of broken joints, making all drawers of table functional and removing of existing coat of paint on steel parts by scraping, filling and repaintingtwo coats of synthetic enamel paint in dual shade (Make: Berger/ Asian Paint) with spray after giving a primer coat with red oxide as per speciaification and as shown on drg complete all as specified and directed. 82 Form without back size of 1525/1900mmS&F in replacement of unserviceableseat with fixing new seat of size 1525/1900mm x 225mm made out of 25mm thick wooden planks of IInd class hard wood with nut, bolt and washer and including polishing to wooden surface seat and sides with french polish high gloss best quality complete all as shown on drawing and as specified. 83 Denting/bending/rewelding Repairs of broken joints and removing of existing coat of paint on steel parts by scraping, filling and repaintingtwo coats of synthetic enamel paint of approved shade (Make: Berger/ Asian Paint) with spray after giving a primer coat with red oxide as directed. 84 Table Writing (Steel) (900X600X760mm) (FD-1008/TP)Removing of unserviceable top of table in any positon, S&F new top made out of 18/19mm thick Exterior grade Prelaminated MDF board of approved shade Make : Action Tesa/ Novapan/Green panel Max (ISI Marked) duly post-formed (PFT) (all-round) with screws including welding of loose joints ofexisting frame before fixing the top of size 900x600mm to framecomplete all as specified and as shown on drawing. 85 S&F in replacement of unserviceable drawer with new drawer alongwith MS frame for housing the drawer as per existing complete all as specified complete all as specified and as directed. 86 Denting/bending/rewelding repairs of broken joints, making all drawers of table functional and removing of existing coat of paint on steel parts by scraping, filling and repainting two coats of synthetic enamel paint of approved shade (Make: Berger/ Asian Paint) with sprayafter giving a primer coat with red oxide as per speciaification and as shown on drawing complete all as specified and directed. 87 Table dining Steel frame (1800x750mm) (TP)Removing of unserviceable top of table in any positon, S&F new top made out of 18/19mm thick Exterior grade Prelaminated MDF board of approved shade Make : Action Tesa/ Novapan/Green panel Max (ISI Marked) duly post-formed (PFT) (all-round) with screws including welding of loose joints ofexisting frame before fixing the top of size 1800x750mm to frame complete all as specified and as shown on drawing complete all as specified and directed. 88 Denting/bending/rewelding Repairs of broken joints and removing of existing coat of paint on steel parts by scraping, filling and repaintingtwo coats of synthetic enamel paint of approved shade (Make: Berger/ Asian Paint) with spray after giving a primer coat with red oxide as per speciaification and as shown on drawing complete all as specified and directed. 89 Peg Table Steel (TP)Removing of unserviceable top of table in any positon, S&F new top made out of 18/19mm thick Exterior grade Prelaminated MDF board of approved shade Make : Action Tesa/ Novapan/Green panel Max (ISI Marked) duly post-formed (PFT) including tightening/welding of loose joints ofexisting frame before fixing the top all as specified on drawing complete all as specified and as directed. 90 Denting/bending/rewelding repairs of broken joints and removing of existing coat of paint on steel parts by scraping, filling and repainting two coats of synthetic enamel paint of approved shade (Make: Berger/ Asian Paint) with spray after giving a primer coat with red oxide as per specification and as shown on drawing complete all as specified and directed. 91 Chair Dining Steel without arms (TP)Opening up and removal of seat, back and shoes of chair Dining steel and preparation of old painted steel surfaces frame with two coats of synthetic enamel paint of approved shade (Make : Berger/ Asian Paint) with sprayafter giving a primer coat with red oxide and refixing of seat/back if in serviceable condition (The seat and back shoes if replaced shall be paid separately under respective items of Schedule ‘A’ here in after as supply only.)The cost of steel nut and bolts, welding of frame where required etc shall be deemed to be included in the quoted rates of this item. 92 S&F in replacement of unserviceable seat with new seat of size 405x430mm made of 18/19 mm thick pre-laminated MDF board (Exterior grade) of approved shade duly beading with 12 mm thick half round teak wood shall be provided all around all as specified and directed. 93 S&F in replacement of unserviceable back with new back of size 405x250mm made of 18/19mm thick pre-laminated MDF board (Exterior grade) of approved shade duly beading with 12mm thick half round teak wood shall be provided all around all as specified and directed. 94 Chair Writing Steel with arms (TP)Opening up and removal of seat, back and shoes of chair writing steel and preparation of old painted steel surfaces frame with two coat of synthetic enamel paint of approved shade (Make: Berger/Asian Paint) with spray after giving a primer coat with red oxide and refixing of seat/back if in serviceable condition.(The seat and back shoes if replaced shall be paid separately under respective items of Schedule ‘A’ here in after as supply only.)The cost of steel nut and bolts, welding of frame where required etc shall be deemed to be included in the quoted rates of this item. 95 S&F in replacement of unserviceable seat with new seat of size 535x470mm made of 18/19mm thick pre-laminated MDF board (Exterior grade) of approved shade duly beading with 12mm thick half round teak wood shall be provided all around all as specified and directed. 96 S&F in replacement of unserviceable back with new back ofsize 470x250mm made of 18/19mm thick pre-laminated MDF board (Exterior grade) of approved shade duly beading with 12mm thick half round teak wood shall be provided all around all as specified and directed. 97 S&F handle of chair writing ofsize 400x60mm made of 18/19mm thick pre-laminated MDF board (Exterior grade) of approved shade duly beading with 12mm thick half round teak wood shall be provided all around with 4 mm dia bolt and nuts with smooth finished edgingall as specified and directed. 98 Chair Easy Steel (TP)Opening up and removal of seat, back and shoes of chair Easy steel and preparation of old painted steel surfaces frame with two coat of synthetic enamel paint of approved shade (Make: Berger/Asian Paint) with spray after giving a primer coat with red oxide and refixing of seat/back if in serviceable condition.(The seat and back shoes if replaced shall be paid separately under respective items of Schedule ‘A’ here in after as supply only.)The cost of steel nut and bolts, welding of frame where required etc shall be deemed to be included in the quoted rates of this item. 99 S&F in replacement of unserviceable seat with new seat of size 575x510mm made of 18/19mm thick pre-laminated MDF board (Exterior grade) of approved shade duly beading with 12mm thick half round teak wood shall be provided all around all as specified and directed. 100 S&F in replacement of unserviceable back with new back of size 480x300mm made of 18/19mm thick pre-laminated MDF board (Exterior grade) of approved shade duly beading with 12mm thick half round teak wood shall be provided all around all as specified and directed. 101 S&F handle of chair easy ofsize 610x60mm made of 18/19mm thick pre-laminated MDF board (Exterior grade) of approved shade duly beading with 12mm thick half round teak wood shall be provided all around with 4 mm dia bolt and nuts with smooth finished edgingall as specified and directed. 102 BENCH STEEL (TP)S&F in replacement of unserviceable wooden planks with new wooden planks size of 1800x380x20mm made of first class hard wood (Teak Wood) fixed to frame (all-round) with nut, bolts and washer size of 4mmx50mm (Eight Nos nut, bolts and washer for each bench) and all exposed surfaces of wood work shall be treated with French Polish high gloss best quality as shown on drawing complete all as specified and directed. 103 Painting to steel surface of the bench with two coat of synthetic enamel paint of approved shade Make: Berger/ Asian Paint) with sprayafter giving a primer coat with red oxide after preparation of old painted surface complete all as specified and as directed. 104 S&F in replacement of unserviceable PVC shoe with new PVC shoe of best quality of serial item No. 19.00, 20.00, 22.00, 23.00, 24.00, 25.00, 26.00, 27.00 & 28.00 complete all as specified and as directed. 105 RACK STEEL 6 TIER (FD-1038)S&F in replacement of unserviceable shelves with new shelves made of mild steel sheet 1.25mm thick duly painted with two coats of synthetic enamel paint of approved shade with nuts, boltsof suitable size complete all as specified and as directed. Note:- The cost of steel nut and bolts, welding of frame where required etc shall be deemed to be included in the quoted rates of this item. 106 Denting/bending/welding, repairs of damaged parts, fixing loose shelves, scraping of existing coat of paints filling, finishing and painting of Rack with two coats of synthetic enamel paint in approved shade of color (Make: Berger/ Asian Paint) with spray after applying a coat of red oxide primer complete all as specified and as directed. 107 CHAIR DINING (FD-16(M)/FD-279)Rear Legs Made of 1st Class hard wood (Teak Wood) 108 Front Legs Made of 1st Class hard wood (Teak Wood) 109 Stiffeners Made of 1st Class hard wood (Teak Wood) 110 Bend stiffeners Made of 1st Class hard wood (Teak Wood) 111 Side rails made of 1st Class hard wood (Teak Wood) 112 CHAIR WRITING (FD-20(M)/FD-280)Rear Legs Made of 1st Class hard wood (Teak Wood) 113 Front Legs made of 1st Class hard wood (Teak Wood) 114 Side rail made of 1st Class hard wood (Teak Wood) 115 Arms made of 1st Class hard wood (Teak Wood) 116 Stiffeners made of 1st Class hard wood (Teak Wood) 117 CHAIR EASY {FD-17(M)/FD-229}Legs made of 1st Class hard wood (Teak Wood) 118 Side rail for seat made of 1st Class hard wood (Teak Wood) 119 Front/Back rail for seat made of 1st Class hard wood (Teak Wood) 120 Arms made of 1st Class hard wood (Teak Wood) 121 S&F Wooden Corner Brackets of size 75x75x20/25mm in serial item No 3.00, 4.00, 5.00, 31.00, 32.00 & 33.00 complete all as specified and as directed. 122 Labourfor removing the U/S worn out / broken cane & re-canning with new plasticcane of not less than 1.8mm wide and border caning atleast 3mm wide as per Godrej pattern including total scrubbing & cleaning of surfacestightening the frame for chair dining, chair writing, chair easy etc complete all as specified and as shown in drawing and as directed. 123 S&F in replacement of unserviceable leg/Rails with new components of MS 25mm square pipe having 1.6mm wall thickness as per existing for serial item No 21.00 to 28.00 complete all as specified and as directed. 124 M&L for cleaning, mild grinding and preparation of old treated wooden surfaces of any description, filling of cracks with putty and applying two coats of french polish for the following wooden furniture all as shown in drgs in any colour/ shade including polishing at site complete all as specified and directed. 125 Bed plywood top FD-213/FD-246 126 Chair Easy FD-17/FD-229 127 Chair Dining FD-16/FD-279 128 Table 900x600x760mm w/drawer FD-41/FD-283 129 Table writing FD-33/FD-275 130 Peg tableFD-25/FD-277 131 Table centre FD-214/FD-274 132 Sofa set 5 seater FD-281/FD-373/FD-258 133 Table dining 6 Person FD-30/FD-239/FD-273
