Tender For Comprehensive Maintenance Work In Zone B Akash Vihar At Af Stn Suratgarh; 1 BOQ (COMPREHENSIVE MAINT WORK IN ZONE B AKASH VIHAR AT AF STN SURATGARH. ) 2 Demolition of brick workbuilt in cement mortar includingall quoins, arches, pillars etc but excluding precast concrete articles, complete all as specified and directed. 3 M&L for brick work with sub class B bricks, straight or curved on planexc 6m mean radius built in cement mortar 1:6, complete all as specified and directed. 4 Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. 5 M&L for PCC 1:5:10 type E-2 using 40mm graded stone aggregates as in filling of sunken floors complete all as specified & directed. 6 M&L for applying for Dr. Fixit bathseal system over the sunken portion floor of bathroom, with the products in the Kit as details below ( Work Shall be carried out by only authorized applicator )Dr. Fixit bathseal 2KWPC - Acrylic elastomeric cementitious waterproof coating for sunken portion Floor and walls in bathroom complete all as specified and directed. 7 Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing ) and removing rubbish off the premises, complete all as specified and directed. 8 M&L for First qualityglazed ceramic colouredtiles of450mmx350mmx7mm thick, laid on vertical surfaces of wall such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in CM 1:4 set and jointed in neat cement paste ofhoney like consistancy and pointed in white or coloured cement to match the shadeof tiles, complete all as specified and directed. 9 M&L for First quality, non skid ceramic coloured tiles, 7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, laid in floors with neat cement slurry @ 3.00 kg/sqm over and including 15mm thick screed bed of cement mortar 1:6 including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed. 10 M&L for first quality, non skid ceramic coloured tiles, 7mm to 8mm thick (square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in CM 1:4 set and jointed in neat cement paste ofhoney like consistancy and pointed in white or coloured cement to match the shadeof tiles, complete all as specified and directed. 11 M&L for vitrified ceramic tileslight shade 10mm thick (square/rectangular))polished area of each tile notexc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles,laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. 12 M&L for 25mm thick PCC 1:2:4 type B1 (Using 20mm graded stone aggregate) as in flooring on roof with smooth surface finished, complete all as specified and directed. 13 Taking up or down 15mm bore steel tubing with connections or fittings from wall, ceiling and floor etc., including cutting/chasing in wall/floor and removal from site, complete all as specified and directed. 14 Taking up or down 20mm bore steel tubing with connections or fittings from wall, ceiling and floor etc., including cutting/chasing in wall/floor and removal from site, complete all as specified and directed. 15 S&F for steel water tubes, 15mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed. 16 S&F for steel water tubes, 20mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floors, complete all as specified and directed. 17 Re-fixing steel water tubing of 15mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, complete all as specified and directed. 18 Re-fixing steel water tubing of 20mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, complete all as specified and directed. 19 S&F in repair stop valve/angle valve 15mm dia cast copper alloy , chromium plated fancy type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. 20 S&F in repair pillar taps, 15mm borecast copper alloy chromium plated , with capstan heads, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed. 21 S&F in repair long body Bib taps,15mm cast copper alloy,chromium plated ,fancy type ,screwed down , screwed for iron pipe , complete all as specified and directed. 22 S& F in repairchromium plated overhead rain shower rose in square pattern of size 160mmx 160mm with revolving joint and shower arm with wall flange 15mm bore fancy type any colour and fixed , complete all as specified and directed. 23 Taking down cement plaster on brick walls & concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. 24 M&L for rendering 10mm thick cement plaster in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smoothwithout using extra cement , complete all as specified and directed. 25 M&L for rendering 5mm thick on RCC ceiling surfaces in CM 1:3 and finished even and smooth without using extra cement , complete all as specified and directed. 26 M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4, finished even and smooth without using extra cement, complete all as specified and directed. 27 M&L for rough cast plaster with a mixture consisting of crushed stone or fine gravel aggregate of size 6mm to 8mm as directed, mixed with coarse sand, fine sand and cement in the ratio of 1:1:1, finished even rendering with under coat 15mm thick cement and sand mortar 1:4 complete all as specified and directed 28 M&L for preparation of new plastered wall surfaces and applying two coats of exterior acrylic emulsion paint(in camouflage pattern using number of colours), complete all as specified and directed. 29 M&L for preparation of new plastered or un plastered wall surfaces of any description and applying two coats of oil bound distemper over a coat of wall care putty,complete all as specified and directed. 30 M&L for preparation of new surfaces of ceiling,chajja etc, including brooming down or steel wire brushing; scrapping downsmoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying three coats of white wash, complete all as specified and directed. 31 S&F in repairs wash hand basins, vitreous china, white, flat back of size 550mmx400mm with pedestal including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32mm dia HDPE waste pipe and including new brackets fixed, complete all as specified and directed. 32 S&F in repair vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws,spreader, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe.(Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified anddirected. 33 S&F in repairVitreous china squatting pan Orissa pattern size 580x440 mm white with integral footrest (includingflushing cistern & flush pipe) including cast iron P or S trap of 100mm bore pipe fixed in PCC 1:2:4 type B-2and necessary lime concrete, including making good the surface to match with existing floor finishcomplete all as specified and directed. 34 S&F in repair vitreous China wash down water closet pan (Padestal Pattern) white including plastic water closet seat cover as per reqd colour with flat bottom cover and mild steel chromium plated or aluminium hinging device(excluding flushing cistern) etc complete all as specified and directed. 35 S&F for PVCvalveless, syphonic action dualtype flushing cisterns 10 ltrs capacity , low level , white, with inlet ball valves , float and handle including brackets and PVC flush pipe 32 mm dia for low level fixed in repair , complete all as specified and directed. 36 S&F in repair PVC connection of PTMT, non corrosive with nuts and washers on both ends, 600mmlong, complete all as specified and directed. 37 Demolition of stone slabs/paver block and tiles of any description or thickness infloors,apronsetc.,laid,beddedandpointedinanymortar, complete all as specified and directed. 38 M&Lformachinecutpolishedkotastoneslabflooring18-20mm thicklaid andjointedwithgrey cement slurry mixed with pigment to match the shade of the slab, including20mmthick screedbedinCM 1:6, rubbing,grindingandpolishingtoachievemirrorfinish, complete all as specified and directed. 39 M&Lforpolishedkota stoneslab 18 -20mmthick inriser of steps,skirting,dado andpillar and jointed with greycement slurrymixed withpigment to match theshade oftheslab, including10mmthick renderinginCM1:6, rubbing,grinding,roundingof edges andpolishingtoachievemirrorfinish,completeallas specified and directed.Note : Kota stone shall be laid in one piece for treads and risers for step, window cills and moulding/rounding of edge properly. 40 M&L for granite tile 18-20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white/coloured cement with admixture of pigment to match the shade of granite tile including cutting and polishing etc including screed bed 20mm thick in CM 1:6 complete all as specified and directed. 41 Taking down of cupboard frames / door frames etc with shutters area exc 1.50 sqm but not exc 4 sqm each & removal complete all as specified and directed. 42 S& F for fabrication of press steel cup board shutter using 1.0mm thick M S plain sheet and with frame 1.25mm thick bent to shape including applying two coats of synthetic enamel paint on internal surface & two coat of synthetic enamel paint wooden grain pattern on external surface along with locking arragement mortice lock handle with a set of two keys completeall as per drg CEBZ/TD/12/2008Note:-(i) The Pressed steel cupboard frame in the middle may be with single or double rebate as per site condition.(ii) Quoted rate shall be inclusive of any such provisions) 43 M&L for 18mm thick prelaminated particle board for cupboardshutter etc, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, including leeping/beading fancy typewith screwsfixed with screws to timber frame work, complete all as specified and directed. 44 S&F for continuous (piano) hinges, mild steel, bright finish or electro galvanised, complete all as specified and directed. 45 S&F of 100mm longHasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed. 46 M&L for bands, straps, supports or stays; hold fasts; wall ties; hooks for hanging fans;similar small articles conforming toFe -290 Gde E-165, complete all as specified and directed. 47 Taking down Chowkhats with shutters (without taking of shutter from the frame) of any description not exc 1.50 sqm each, and making good the disturbed Surface in CM1:4 &finish the surface as exists, complete all as specified and directed. 48 S&F Factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted as per specification & drawing, complete all as specified and directed. 49 S&F for Factory made solid panel PVC Door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail,lock rail and bottom rail on either side as gap insert for top rails, bottom rail,panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and directed. 50 Taking down Chowkhat or frame with shutter (without taking out shutter from frame) of area exc 1.5 sqm but not exc. 4 sqm eachcomplete all as specified and directed. 51 Taking down chowkhat or frame of area exc 1.5 sqm but not exc. 4 sqm each,complete all as specified and directed. 52 S&F of 35mm thick 2nd class hardwood (Hollock) skeleton shutters, open rebated and prepared to receive wire cloth, glass etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, wire cloth etc, sizes of members of shutters as per specification, complete all as specified and directed. 53 S&F of 30mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type back side and one face is covered with decorative face veneer with lipping/frame to match, fitted to chowkats complete all as specified and directed. 54 S&F pressed steel frames of size 125mmx60mm for doors with one or more rebated including necessary fixing lugs, hingesstrike plate etc, complete all as specified and directed. 55 Taking down wooden windows/ventilator with frame of any description and any size, complete all as specified and directed. 56 Taking down steel windows/ventilator with frame of any description and any size, complete all as specified and directed. 57 M&L for factory made steel windows box type using ERW hollow P section comprising double frame for glazed and gauged skelton shutters jointed internally with flat iron 40mmx4mm complete including grill of 10mm square bar, fixed horizontally @ 10cm centre to centre hinges, handle, tower bolts, lugs etc with/Without Cooler Provisioncomplete all as specified and directed.Note:- (i) For the purpose of measurement and payment double shutter with frame shall be consider as one unit.(ii) Glazing and wire mesh shall be measured and paid for separatley. 58 M&L for factory made box type steel section ventilators, fixed type with glazing bars @ 10mm square bar @ 10cm c/c and with one shop coat of zinc chromate primer, complete all as specified and directed. 59 Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling our glazing pins / spring clipsproviding and fixing new one, complete all as specified and directed. 60 S&F for sheet glass 3mm thick, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 sqm in each pane, complete all as specified and directed. 61 S&F for figured glass 3mm thick, pin headed type and glazing with oil putty (in metal frames etc) in squares not exc 0.5 sqm in each pane, complete all as specified and directed. 62 S&F for aluminium handles ,plate cast type anodised of 150mm size, complete all as specified and directed. 63 S&F for aluminum anodizes 200mm long barrel tower bolts of extruded section and fixed of size, complete all as specified and directed. 64 S&F for butt hinges medium weight cold rolled mild steel of 100mm size and fixed, complete all as specified and directed. 65 S&F for aluminum alloy, anodized, door bolt with hasp staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed length of bolt 250mm, bolts not less than 16mm dia with and including a minimum of 6 bolts, four on bolt plate and two on staple plate (ISI marked ), complete all as specified and directed. 66 S&F for stainlesssteel wire cloth, 0.56mm nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed. 67 M&L for preparing new or previously untreated steel surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed. 68 M&L for preparation of new wooden surfaces of any description, exc 10cm width or girth of any description and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. 69 Dismantling existing water storage tanks exc 250 litres but not exc 500 litres capacity by disconnecting existing water connection and removal from site, complete all as specified and directed. 70 S&F for rotational moulded PVC, white coloured, tripple layered, water storage tanks of capacity 500 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple etc. but excluding ball valve, complete all as specified and directed. 71 S&F in repair PVC tank lid (cover) suitable for 500/1000 Ltrs capicity water tank with hinged and hooked fixing by steel screw for existing PVC water tank on building, complete all as specified and directed. 72 Cleaning and removing all scale and dirt, etc, using jute brush from inside & out side of 250 Ltr to 500 ltrs capacity PVC water tanks and from mouths of connected pipes, removing the scale and dirt etc, to a distance of not exc 500 mtr, washing the tanks with water , cleaning the connecting pipes with bleaching powder solution and finally applying 2% potassiun permaganate solution for disinfection, marking with paint on tank Date of Cleaning the tank, complete all as specified and directed. 73 S&F in repair bib tap standard of PTMT, 15mm bore dia of any colour high pressure screwed for iron pipe as(minimum weight 90gms), complete all as specified and directed. 74 S&F in repairs Ball valve of 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe(Minimum weight 210gms), complete all as specified and directed. 75 S&F in repair stainless steel sink with drainage board made of 1.00 mm thick sheet for kitchen or with plugs washers & wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm with bowl size410mm x330mmx160mm, with and including PVC waste pipe and CP waste coupling 32mm and making good to disturbed surfaces, complete all as specified and directed. 76 S&F in repair stainless steel sink withoutdrainage board made of 1.00mm thick sheet for kitchen or with plugs washers & wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mmx420mm bowlsize 410mmx330mmx160mm, with and including PVC waste pipe and CP waste coupling 32 mm and making good to disturbed surfaces, complete all as specified and directed. 77 Demolition of false ceiling of any description, any thickness including cover fillets and frame work complete all as specified and directed. 78 M&L for exposed GI frame/grid system duly powder coated for module size of 600mmx600 mm suitable for lay-in aluminium / mineral fibre ceiling tiles, having main T runner of 24mm size, suspended at 1200mm C/C and cross T runner of 24mm size, suspended at 600mm C/C with interlocking arrangements to form grid of 600mmx600mm, perimeter runner/channel of 15mm size, main and cross T runner supported by 4mm dia GI rod from slab / Roof, wall angle etc with and including all fixing accessories and making good to distrubed wall surfaces , as required to match the existing surfaces, complete all as specified and directed. 79 M&L formetal false ceiling, lay-in type, 0.5mm thick, having tegular edge profile,duly powder coated, perforated type suitable for false ceiling grid/frame module of 600mmx600mm size, complete all as specified and directed. 80 M&L for 5mm thick coloured PVC sheet tiles for insulation and accoustic purpose, 60x60cm in size, fixed on with and including pre powder coated GI section snap grid of size 605mmx605mm frame work for false ceiling and complete all as specified and directed. 81 S&F for 8mm thick hollow printed coloured PVC sheet wall lining/panelling including frame work (sample kept in GE office) made of 1mm thick PVC sheet in strips and channels feathered at the edges for fixing of wall lining inclusive of solvent cement and fixing at site, complete all as specfied and directed. 82 M&Lfordoor seal rubberbeading75mm wide4mm thickforfixingwithdoor shutter andsimilarsituationincludingnecessarydrillingandcuttingetc, complete all as specified and directed. 83 S&F in repair PVC waste pipe for WHB including all fittings, complete all as specified and directed. 84 S&F in repair 100/125 mm dia CP grating with/without hole, complete all as specified and directed. 85 S&F in repair 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. 86 S&F in repair 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. 87 S&F in repair 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls, complete all as specified and directed. 88 S&F in repair 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls, complete all as specified and directed. 89 S&F for 75mm bore PVC (SWR) bends any radius, complete all as specified and directed. 90 S&F for 110mm bore PVC (SWR) bends any radius, complete all as specified and directed. 91 S&F for 110mm PVC (SWR) WC connector with lip ring, complete all as specified and directed. 92 S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement for 75mm bore of pipes, complete all as specified and directed. 93 Dismantling asbestos cement (Corrugated, Semi corrugated etc.) sheets in roof coverings, complete all as specified and directed. 94 M&L for pre painted galvanlume aluminium zinc coating havingGI based corrugated steel sheets 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screw complete all as specified and directed. 95 Dismantling mild steel work of any description not otherwise provided for complete all as specified and directed. 96 Dismantling structural steel work in including doors, window, gates ,angles but excluding framed truss etc, complete all as specified and directed. 97 S&F for mild steel framed work such as in doors /chowkhats or gates of angle or other section with gusset plates, rail, braces etc. complete drilled for fixing of steel sheeting or other covering. doors etc. to be prepared for hanging or sliding with including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening & fixing and similar work conforming to Fe-290 grade E-165, complete all as specified and directed. 98 S&F for mild steel work for framed structure liketrrussed, purlins, crane gantries, postrails and fastenings and heavy bracket framming (Beam,Tee, Angle, Channels, tubes, hot sections) including distance pieces, cleats etc conforming to Fe410-W (Gde-E-250) quality-A, complete all as specified and directed. 99 Taking down aluminium door with frame,window of any description and any size, complete all as specified and directed. 100 S&F for toughened glass frameless partition (area of single partition upto 10 sqm )with fixed portionof 12mm thick glass including cutting holes edges rounded and patching works etc and all kind of SS patch fitting & fixture spinder patch etc complete all as specified and directed. 101 S&F in repair of double cylinder floor spring hydraulically regulated suitable for toughned glass door of upto120Kg weight, with top and bottom SS pivot, having corrosion resistance galvanized steel housing, High grade cast iron mechanism body with SS cover plate, other parts made of MS, heavy duty, ISI marked, complete all as specified and directed. 102 S&F for aluminium powder coated chowkhats of 100mmx44mmx1.5mm section with rebate, complete all as specified and directed. 103 M&L for 5.5mm thick tinted glass including necessary clips, rubber packing & aluminium beading (aluminium frame ), complete all as specified and as directed. 104 Supply fabricating and fixing of aluminium door powder coated of extruded aluminium section, vertical style of door shutter of size 85mmx44.45mmx1.5mm thick.Top, middle and bottom rail of size 85mmx44.45x1.5mm thick and fixingplain/tinted sheet glass with aluminium beadingand rubber gasket/beading as directed One mortice lock for aluminium door (each), and three nos aluminium hinges of size 100mm and two aluminium tower bolts of 250mm size and 02 nos american type hinges of size 250mm for each door fixed with rawl plug including rectification of floor/wall to match the existing surfaces, completeall as specified and directed.Note:-Cost of sheet glass Plain/frosted shallbe measured and paid sepearately. 105 S&F for aluminium powder coated glazed three track sliding window of frame 100mmx44mmx1.5mm and sliding shutter of section 40mmx19mm including 3mm thick sheet glass, ordinary quality exceeding 0.5 sqm in each pane, in two track shutter and in one track stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, including all fittings such as aluminium handle of size 100mm and locking arrangements with each moving leaf, complete all as specified and as directed. 106 Contract Amount shall be derived after affecting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents.
