Tender For Construction work of Teeja site near primary school in Ward-9 Mohalla-Tada, 1 Excavation in foundations in ordinary soil ( Loam clay or sand ) including lift up to 1.5 m and lead up to 30.0 meter and including filling, watering and ramming of excavated earth in to the trenches or into the space between the building and the sides of foundation trenches or in to the plinth and removal and disposal of surplus earth as directed by the Engineer- in charges up to a distance of 30 m from the foundation trenches 2 Providing and laying cement concrete in 1:6:12 (1 cement : 6 Fine sand : 12 Brick ballast 40 mm gauge) 3 First class brick work in 1:4 cement and coarse sand mortar in Foundation & Filling one brick thick including supply of all materials, labour and T & P etc. required for proper completion of work. 4 First class brick work in 1:4 cement and coarse sand mortar in Super Structure brick thick including supply of all materials, labour and T & P etc. required for proper completion of work. 5 RCC Work with cement, approved coarse sand and 2 cm gauge approved stone grit in proportions of 1:1.5:3 in Raft foundation and Footing 6 RCC Work with cement, approved coarse sand and 2 cm gauge approved stone grit in proportions of 1:1.5:3 in Beam 7 RCC Work with cement, approved coarse sand and 2 cm gauge approved stone grit in proportions of 1:1.5:3 in Column or Wall 8 RCC Work with cement, approved coarse sand and 2 cm gauge approved stone grit in proportions of 1:1.5:3 in Slab 9 Supply, Fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and technical specifications including supply of all material, labour, Tools & Plants etc. required for proper completion of work 1.20Qtl/Cum of RCC Raft , 1.00Qtl/Cum of RCC Lighter Beam , 1.80Qtl/Cum of RCC Column , 1.40Qtl/Cum of RCC Slab 10 12 mm thick Plaster with cement& course Sand of 1.25 FM Mortar in 1:4 11 Supplying of Earth for cutting or in embankment in ordinary soilearth work in filling or embankment to be in 20 cm layers, including ,watering ,Dressing ,compacting ,ramming the soil to achive 95% proctor density ,and dressing the surface to be required levels and slope and also including1.50m lift and 30 m lead . The earth from cutting to be used in making embankment or to be deposited as spoil banks within 30m distance and cartage upto 8Km distance as directed by the Engineer-in-charge 12 Laying cement concret with cement, c.sand and 20 mm stone grit in 1:2:4 13 2.5 cm (1) thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm. (1) graded approved stone grit, laid inpanels finished with 3 mm. (1/8) floating coat of neat cement of cement and marble dust in ratio 5:1 as specified over and including 8 cm (3) thick base concrete consisting of cement, fine sand of 1.25fineness modulus and brick ballast 4 cm. (1½) gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the penals if any and giving them a uniform finish, including supply of all materials, labour, Tools & plants etc. requiredfor proper completion of the work. 14 Finishing wall with water proof cement paint of approved make and quality on new wood with two coat to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 15 M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work 16 Apply two coat superior synthetic enamal paint including primer coat on steel surface 17 Providing of wall painting with make picture and slogan and writing making base of all work complete. 18 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes 19 Supply and fixing Galvanized corrugated iron roofing in position including supply of all materials, labour, Tools &plants etc. requiredfor proper completion of the work and including wastage. 0.63mm tick 20 Supply and Fixing of 11 cm internal dia PVC down pipe (kissan/suprime make) complete with bends with door at top and plain at bottom and grantings and including supply of necessary MS clamp 2.5cm X 3mm Fixed to wall with cement mortar 1:2 and including supply of 15cm long 6mm dia nail all material, labour and T&P etc. required for proper completion of work and also includingrepair of plaster pointing etc.if damaged during fixing of pipe. 21 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.) 20 mm nominal outer dia .Pipes. 513.75X0.85=436.68 22 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)20mm nominal bore 461.75X0.85=392.48: 23 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap 2731.45X0.85=2321.73 24 Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. 3389.35X0.85=2880.94 25 Wiring points for light with 1.5 sqmm.FRLSH PVC insulated single core aluminium condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FRLSH PVC insulated multistrand copper conductor cable asearth continuity wire and piano type switch etc. complete in all respects. 26 Same as item No. (1) but for fanandlight duty exhaust fan. 27 Same as item No.(1) but for5amp plug point with piano type switch and socket etc. 28 Supply & installation of Metal LED Bulb (White, 20 Watts) of approved make Havells make 29 Supply and burying of 40mm dia x 4.5meters long G.I. pipe, vertically for earthing having 12 mm dia. Holes spaced 75mm apart drilled upto 2 meters from the bottom complete with earthing lead of no 6 to 8 SWG GI wire in GI pipe upto appron (and from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) upto switch board, 30cm. square C.I. boxwith hinged cover, masonary enclosue, funnel at top, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects. 30 Supply & fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipefor earthing, laid in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the wirk as directed at site. 31 Supply and fixing of 240 volts L series miniature circuit breaker 9 K.A / 10 K.A.in existing MCB, DB complete with connections as required. 5 - 32 amps. 32 Supply and fixing of flush/surface mounting distribution boards complete in all respects. 8Way SPN 33 Supply & installation of Ceiling Fan(1200mm dia) of approved make Havells make 34 Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. Pipe 19mm dia duly painted, complete in all respects. 35 GST 18 %
