Tender For Construction Of All Work On Turn Key Basis Of Padrauna Npp Water Supply Reorganization Scheme Distt Kushinagar, 1 Pump House 2 Supply of all materials, laours, T&P etc. and construct pump house cum chloronome of size ( 3.60 M x 3.0 M x 3.0 M / 2.50 M x 1.80 M x 3.0 M) with stilling chamber for tubewell, including byepass chamber. Plan , elevation & drawing attached in bid document are indicative in nature and final design & drawing will be approved as per soil test result & seismic zone plan & elevation against soil test and seismic zone. 3 Zone-3 (For T.W-1 & 2) 4 Zone-4 (For T.W-1,2 & 3) 5 Zone-5 (For T.W-1,2 & 3) 6 Zone-7 (For T.W-1 & 2) 7 Zone-9 (For T.W-1,2 & 3) 8 Zone-10 (For T.W-1 & 2) 9 REPAIR OF EXISTING PUMPHOUSE 10 Supply of all materials, laours, T&P etc. and construction work for repairing & Painting of existing pumphousecum chloronome as per Unit Estimate / upto satisfaction of engineer in charge. 11 Zone-1 (for T.W. 1 & 2) 12 Zone-2 (for T.W. 1,2 & 3) 13 Zone-6 (for T.W. 1 & 3) 14 Zone-8 (for T.W. 1 & 2) 15 Staff Quarter 16 Provide all materials, labour T&P etc. and construct Single room staff quarter with box & kitchen. Plan , elevation & drawing attached in bid document are indicative in nature and final design & drawing will be approved as per soil test result & seismic zone plan & elevation against soil test and seismic zone. 17 FOR ZONE-3 18 FOR ZONE-4 19 FOR ZONE-5 20 FOR ZONE-7 21 FOR ZONE-9 22 FOR ZONE-10 23 Repair of existing Staff Quarter 24 Supply all materials, tool & plants etc. for repairing work of existing staff quarter including plastering/ painting work and repairing and replacement of doors/windows etc complete as per Unit Estimate / upto satisfaction of engineer in charge. 25 Zone-1, Sugar Factory Full set staff quarter 26 Zone-2, Jal Kal Campus, Full set staff quarter 27 Zone-6, Subhash Chowk, Half set staff quarter 28 Zone-8, Chhawni Pokhar, Full set staff quarter 29 Boundary wall approach road etc 30 PROPOSED NEW WATER WORKS CAMPUS 31 Supplying of all labour, material T&P etc and constructing boundary wall at water works. Plan , elevation & drawing attached in bid document are indicative in nature and final design & drawing will be approved as per soil test result & seismic zone plan & elevation against soil test and seismic zone. 32 Supply and fixing of 3.6 m wide M.S. gate with 1.20M wide MS wicket gate including construction of pillars as per departmental type design and drawing , one coat of primer and two coat of paint, its all fixures, including all material, labour,T&P etc.required for proper completion of work as per Unit Estimate / upto satisfaction of engineer in charge. 33 Supply and fixing of 1.20M wide MS wicket gate including construction of pillars as per departmental type design and drawing , one coat of primer and two coat of paint, its all fixures, including all material, labour,T&P etc.required for proper completion of work as per Unit Estimate / upto satisfaction of engineer in charge. 34 Supplying and constructing Interlocking approach road by using coloured interlocking leveling and dressing of existing ground, filling of local sand in minimum 30 mm thickness,filling of voids by local sand including all materials , labour, T&P etc.complete required for proper completion of workas per Unit Estimate / upto satisfaction of engineer in charge. 35 Supplying, carting and filling of good earth in campus in maximum 25 cm thick layers, its compaction by roller, watering dressing levelling to achieve minimum 95 % procter density ( to avoid settlemnt of road/ structure) Provide all materials , labour, T&P etc.required for proper completion of works in complete sence upto satisfaction of engineer in charge.(contractor will have to do original and final level survey of earth for which no extra payment will be done) 36 Supplying and planting plants, shrubs, flowering plants in campus for Arboriculture/Horticulture including , supply of mmanures etc required to complete the jon upto satisfaction of engineer in charge. 37 REPARING OF EXISTING WATER WORKS 38 Construction of Damaged boundary wall including Supplying of all labour, material T&P etcas per departmental type design and drawing at water worksas per Unit Estimate / upto satisfaction of engineer in charge. 39 Painting work with weather coat approved quality of paints on wall both side. 40 Painting or varnishing ofiron or wood with one coat of priming and two coats of approved paint & varnish including supply of all materials, labor, T & P etc; required for proper completion of the work. 41 12mm thick plaster with cement and coarse sand mortar in 1:4 over brick work including supply of all materials, labour T&P etc. complete. 42 Supplying and constructing Interlocking approach road by using coloured interlocking leveling and dressing of existing ground, filling of local sand in minimum 30 mm thickness,filling of voids by local sand including all materials , labour, T&P etc.complete required for proper completion of workas per Unit Estimate / upto satisfaction of engineer in charge. 43 LOCAL CONTROL STATION ROOM 44 Supply of all materials, laours, T&P etc. and construction of LOCAL CONTROL STATION ROOM of size ( 8.0 M x 5.0 M x 4.0 M). Plan , elevation & drawing attached in bid document are indicative in nature and final design & drawing will be approved as per soil test result & seismic zone plan & elevation against soil test and seismic zone. 45 RISING MAIN 46 Excavation in trenchessin ordinary soil (loam, clay of sand) for depth 0-1.5 mbelow ground level for laying water lines. including cutting of joints pits, trimming, dressings, leveling, refilling of trenches in 20 cm layers, watering and ramming the same including removal of surplus earth and other dismantled materials, upto a distance of 50m from the center of trenches and stacking of serviciable material also upto satisfaction of engineer in charge.(for distribution and rising main) 47 Supply,carting from store upto site of work, laying in true to alignment & gradient in trenches, with its specials including supplying and fixing of C.I.D/F specials required and testing of the following size and type of pipes after laying,specials and all jointing materials etc.including F.O.R. destination, insurance and with loading, unloading and stacking etc. complete in all respect upto satisfaction of engineer in charge. 48 200 mm dia DI pipe Class K-9 49 Supply, carting upto site, loading unloading, fixing in position true to alingment including all jointing material, specials, nut-bolts etc., rubber insertion white lead,valves of following size of C.I.D./F. Sluice valves as per ISS 780 class I, working pressure 10 kg/cm2,and its accesories as per latest I.S. specification including F.O.R. destination, all taxes, labour, material T&P etc complete in all respect, insurancefor proper completion of work upto safisfaction of engineer in charge. 50 200 mm dia Sluice valve 51 Supplying and constructing following types of chambers as per approved design and drawing including all labour, material T&P etc complete in all respect upto satisfaction of engineer in charge. 52 Sluice valve chamber (masonary Type) 53 Dismanting of Following type of surfaces including sorting out and stacking of serviceable materials and disposal of unserviceable materials , including all labour material T&P etc complete in all respect.( in case of theft of sericiable material it will be the responsibility of the contraactor). 54 (i) Bituminous surface 55 Reinstatement of following type of road surface with old ( serviciable material) and new materials as per detailed scope of work and technical spefication including supply of all materials, labour, T&P etc. required for proper completion of the work upto satisfaction of engineer in charge. ( in case of any type of settlement upto minimum one rainy season contractor will have to reinstate it again for which no extra payment will be done). 56 (i) Bituminous surface 57 R.C.C. with cement, coarse sand & 20 mm gauge stone ballast in proportion of 1:1.5:3 in thrust blocks of pipe line excluding supply of reinforcement & its bending but including its fixing & binding the same with 0.50 mm thick binding wire in position & necessary centering & shuttering including curing and supply of all materials, labour, T & P etc. required for proper completion of the work.(for thrust block) 58 Mild steel or iron work in R.C.C. wrought to required shape as necessary size including cutting, bending for proper completion of the work including supply of steel & wastage etc. 59 DISTRIBUTION SYSTEM 60 Excavation in trenchessfor depth 0-1.5 m below ground level for laying water lines. including cutting of joints pits, trimming, dressings, leveling, refilling of trenches in 20 cm layers, watering and ramming the same including removal of surplus earth and other dismantled materials, upto a distance of 50m from the center of trenches and stacking of serviciable material also upto satisfaction of engineer in charge.(for distribution and rising main) 61 In ordinary soil (loam, clay of sand,silt) 62 In Maruam /Kankar / Shingle etc. 63 Supply,carting from store upto site of work, laying in true to alignment & gradient in trenches and testing of the following size and type of pipes with coupler,specials and all jointing materials including F.O.R. destination, insurance and with loading, unloading and stacking etc. complete. 64 200 mm dia DI pipe Class K-7 (IS-8329/2000) 65 250 mm dia DI pipe Class K-7 (IS-8329/2000) 66 300 mm dia DI pipe Class K-7 (IS-8329/2000) 67 350 mm dia DI pipe Class K-7 (IS-8329/2000) 68 400 mm dia DI pipe Class K-7 (IS-8329/2000) 69 Supply,carting from store upto site of work, laying in true to alignment & gradient in trenches, with ots specials, jointing by electrofusion with coupler and testing of the following size and type of pipes after laying,specials and all jointing materials including F.O.R. destination, insurance and with loading, unloading and stacking etc. complete in all respect upto satisfaction of engineer in charge. 70 90 mm dia HDPE PIPE PE-100,,PN-6(IS-4984/2016) 71 110 mm dia HDPE PIPE PE-100,,PN-6(IS-4984/2016) 72 140 mm dia HDPE PIPE PE-100,,PN-6(IS-4984/2016) 73 160 mm dia HDPE PIPE PE-100,,PN-6(IS-4984/2016) 74 Supply, carting upto site, loading unloading, fixing in position true to alingment including all jointing material, specials, nut-bolts etc., rubber insertion white lead,valves of following size of C.I.D./F. Sluice valves as per ISS 780 class I, working pressure 10 kg/cm2,and its accesories as per latest I.S. specification including F.O.R. destination, all taxes, labour, material T&P etc complete in all respect, insurancefor proper completion of work upto safisfaction of engineer in charge. 75 80 mm dia Sluice valve 76 100 mm dia Sluice valve 77 125 mm dia Sluice valve 78 150 mm dia Sluice valve 79 200 mm dia Sluice valve 80 250 mm dia Sluice valve 81 300 mm dia Sluice valve 82 350 mm dia Sluice valve 83 80 mm dia Scour valve 84 25 mm dia Air valve 85 Supply, carting from store to site, loading unloading and fixing in position including supply of jointing materials such as nuts-boalt, rubber insertion white lead,valves etc. and all specials required for proper completion of workunder ground sluice valve type fire hydrant containing80mm dia sluice valve 80 mm dia tail piece ,80 mm dia duck foot bend, 63 mm dia standard makes iron coupling with cap and its accesories as per latest I.S. specification including F.O.R. destination, all taxes and insurance etc. complete for proper completion of work upto satisfaction of engineer in charge. 86 Supplying and constructing following types of chambers as per approved design and drawing including all labour, material T&P etc complete in all respect upto satisfaction of engineer in charge. 87 Sluice valve chamber (masonary Type) 88 Sluice valve chamber (surface box Type) 89 Fire Hydrant 90 Air valve chamber 91 Provision for crossing of nalas, road, culvert and embankments (bundha) etc. including shifting of telephone cables etc.along the alignement of pipe line including supply of C.I.Tyton pipes and specials,and their laying and jointing testing etc.complete in all respect upto satisfaction of engineer in charge.( width of drain/culvert/bundha must be greater than 1 m) 92 Provision for crossing of square drain. 93 Provsion for crossing of Culvert 3.5 M 94 Provision for road crossing 3.5 M 95 Shifting of Telephone line 96 Dismanting of Following type of surfaces including sorting out and stacking of serviceable materials and disposal of unserviceable materials , including all labour material T&P etc complete in all respect.( in case of theft of sericiable material it will be the responsibility of the contraactor). 97 i-C.C.Road 98 ii-Bituminous surface 99 iii-B.O.E. Surface 100 iv-Interlocking Surface 101 Reinstatement of following type of road surface with old ( serviciable material) and new materials as per detailed scope of work and technical spefication including supply of all materials, labour, T&P etc. required for proper completion of the work upto satisfaction of engineer in charge. ( in case of any type of settlement upto minimum one rainy season contractor will have to reinstate it again for which no extra payment will be done). 102 i-C.C.Road 103 ii-Bituminous surface 104 iii-B.O.E. Surface 105 iv-Interlocking Surface 106 Making house connection with 20mm(OD) HDPEmain with Supply,Carting ,laying , jointing and fixing of the 20 mm (OD) G.I. pipe ,I.S.I. Mark brass Ferrul , I.S.I. Mark saddle/clamp of required size, Brass bib kock of approved quality, J-Hook or M.S.U-clamp, 25cmX25cmX25cm C.C grouting of unsupported G.I. pipe all connection in inside thehouse and support on wall with suitable clampas perdirected by engineer-in chargeincluding cost of all jointing material, specials, labour,material T&P and its testing etc. complete in all respect upto satisfaction of engineer charge.( contractor will have to submit list of house hold survey for which no extra payment will be done) 107 90 to 110 mm B.O.E. road 108 90 to 110 mm CC road 109 90 to 110 mm Bituminous road 110 90 to 110 mm Interlocking road 111 125 to 160 mm B.O.E. road 112 125 to 160 mm CC road 113 125 to 160 mm Bituminous road 114 125 to 160 mm Interlocking road 115 160 to 200 mm B.O.E. road 116 160 to 200 mm CC road 117 160 to 200 mm Bituminous road 118 160 to 200 mm Interlocking road 119 200 to 250 mm B.O.E. road 120 200 to 250 mm CC road 121 200 to 250 mm Bituminous road 122 200 to 250 mm Interlocking road 123 Shifting of Existing House Connection to New Pipe Line with requared 20mm(OD) HDPEmain with Supply,Carting ,laying , jointing and fixing of the 20 mm (OD) G.I. pipe ,I.S.I. Mark brass Ferrul , I.S.I. Mark saddle/clamp of required size, brass bib kock of approved quality, J-Hook or M.S.U-clamp, 25cmX25cmX25cm C.C grouting of unsupported G.I. pipe all connection in inside thehouse and support on wall with suitable clampas perdirected by engineer-in chargeincluding cost of all jointing material, specials, labour,material T&P and its testing etc. complete in all respect upto satisfaction of engineer charge.( contractor will have to submit list of house hold survey for which no extra payment will be done) 124 90 to 110 mm B.O.E. road 125 90 to 110 mm CC road 126 90 to 110 mm Bituminous road 127 90 to 110 mm Interlocking road 128 125 to 160 mm B.O.E. road 129 125 to 160 mm CC road 130 125 to 160 mm Bituminous road 131 125 to 160 mm Interlocking road 132 200 to 250 mm B.O.E. road 133 200 to 250 mm CC road 134 200 to 250 mm Bituminous road 135 200 to 250 mm Interlocking road 136 OHT 137 Total station survey/DGPS of the project area, construction of level pillars at all important locations, soil investigation, designing (As per relevant seismic zone), supplying all materials,for construction of R.C.C. Over Head Tank following typeCapacity andstaging above ground level with main components, including cost of all survey, designing, geotechnical investigation, testing ( footing raft/pile will be provided based on actual bearing capacity of soil for contractor is advised to investigate the soil before tendering), with supply of design and drawings and its vetting from any national level Governmentengineering institute.All the water retaining components of OHT shall be casted in M-30 concrete and minimum grade of concrete of foundation and staging should be M-25 or as per latest I.S. code with approved cement, coarse sand and stone grit as per I.S. 11682 and I.S.456.Seismiceffects ( seismic zone -IV) and wind load should be taken into consideration as per I.S. 1893 for earthquake resistance and I.S. 875 part-III for wind load on structure and including 1M wide RCC staircase, 1 m wide R.C.C. M25 balcony,ladderwith hand rails of 20mm medium class G.I. pipes, One aluminum ladder inside the tank from top dome to bottom dome, railing with 20mm dia medium class G.I.pipe (in 3 rows) on both sides of stair case,bolcony and top dome, supported on 50x50x6mm M.S. angle section, spaced at intervals not more than 1.5m, Proper ventilator at top dome in circular shape of 1.2 m dia, Water level indicator fabricated with sensor connecting to automation, Lightening conductor as per I.S.S.2309 or its latest amendments of latest electricity rules, consisting of proper elevation rod with 5 or more fork points as prescribed in ISS 2309-1969 and ISS 3013-1966, C.I. manhole of min 60x60cm size with locking arrangement, Supply, fixing, jointing of C.I.D/F Pipes of appropriate size with C.I.D/F specials conforming to IS 8329/2000 as vertical pipes for inlet, outlet, overflow and washout as per latest / relevant I.S. specificationswith all jointing materials for proper completion of work,Supply and Fixing of appropriate size manually operated D/F Sluice Valve / Butter Fly Valves as per ISS 700/1969 or its latest amendments class “A” working pressure 10 Kg/cm2, Construction of bed blocks in 1:2:4 PCC with cement, coarse sand and approved stone grit , Construction of washout / overflow chamber and chambers for sluice / butter fly valves as per departmental type design and drawing, Supply of 200 mm dia PVC pipe as per I.S.-4985/2000 for disposal of water from overflow and washout chamber to suitable point outside the water works compound.Supplyand fixing of 1.8 m hight M.S. Gate in staire case at 2nd fligth as per direction of engineer -in-charge. Priming and Painting of all concrete surface and steel pipe works with water based exterior paint of approved make and quality as mentioned in tender documentover one priming coat on new work with two coats, to give an even shade and anticorrosive paints including prepration of surface, disposal of water from overflow and washout chamber to suitable point outside the water works compound including excavation of trenches.laying of pipe line &supply of all matrials labour T&P etc. required for proper completion of the work. AS PER DIRECTION and upto satisfaction of engineer in charge. 138 For Zone-3 (1000 KL/20M) 139 For Zone-4 (1700 KL/20M) 140 For Zone-5 (1900 KL/20M) 141 For Zone-7 (1350 KL/20M) 142 For Zone-9 (1450 KL/20M) 143 For Zone-10 (850 KL/20M) 144 Supply all materials labour T&P etc. complete & repairing & painting of below mentioned capacity existing RCC Overhead tanks as per Unit Estimate / upto satisfaction of engineer in charge. 145 For Zone-1 (900 KL/18M) 146 For Zone-2 (850 KL/18M) 147 For Zone-6 (550 KL/18M) 148 For Zone-8 (650 KL/18M) 149 Ground water recharge 150 Providing all material,labour T&P etc complete for construction of Ground water Recharging unit by rain water from complete water works site in water works campus as per Unit Estimate / upto satisfaction of engineer in charge. 151 FOR ZONE-3 152 FOR ZONE-4 153 FOR ZONE-5 154 FOR ZONE-7 155 FOR ZONE-9 156 FOR ZONE-10 157 (E & M) ZONE-I 158 SCADAAUTOMATION OF (OLD Tubewell) 159 SCADAAUTOMATION ITEMS 160 CE & UL Certified PLC/RTU in IP 54 enclosure suitable to Communicate with GSM based modemunit with CPU & Power supply with analog & digital parameter & fetures as specified for each tubewell/OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified also enabled with UPS for power backup upto 2Hrs & automatic on/off switching arrangement. 161 G.S.M/G.P.R.S based wireless communication 4G Modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification. 162 CE/UL certified 7 HMI touch screen suitable to communicate with PLC/RTU for local display and control of process parameters. 163 CE/UL Certified Surge protector for control panel 164 Complete cabling for all equipments at pump house 165 Control panel with IP 54 protection, industrial grade for all equipment (Separate for control (24V) and power equipment). 166 Installation, commissioing & testing for one tubewell 167 Trial Run for 3 month period for one tubewell 168 Instrumentation Item for(OLD) Existing Tubewell 169 Motor OperatedActuator with Sluice Valve (150mm) 170 CE / UL certified Electromagneticflowmeter of size:150mm 171 SITC of Automatic chlorination system SCADA Compatable chlorinating system. 172 Auto phase revarsal unit with inbuilt time delay & enclouser(confirm to IEC: IEC 60947-1 & IEC: 60947-b-1) 173 CE / UL certified Hydrostatatic type sub soil water level transmitter 174 CE / UL certified Pressure Transmitter 175 CE / UL certified Intelligent smart energy meter 176 soft starter with RS485 Port- 400V Clas, 22KW, Rating 177 Supply & Erection of Servo Stabilizer of 40 KVA 178 Automation of OHT 179 Motor operatedActuator with Sluice valve 400mm Size 180 Electromagnetic Flowmeter of 400mm Size 181 CE/UL Certified Radar type level transmittor for OHT 182 ZONE-II 183 Transportation 184 Rig Machine 185 Transportation of Rig m/c and its T&P including Erection and Dismantling of Rig m/c. 186 Transportation of 250 psi compressor including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 187 O.P.Unit 188 Transportation of 2/3 cusec op unit including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 189 Drilling of Bore 190 Logging of bore hole by departmental/approved electric logger. 191 Drilling of 600mm dia bore from G.L. to 60m BGL. 192 Drilling of 500mm dia bore from 61m BGL to 100m BGL. 193 Drilling of 500mm dia bore from 100m BGL to 165m BGL. 194 TUBEWELL ASSEMBLY 195 300mm dia size MSERW housing pipe 7.1mm thick including with 1 no 300 X 150mm dia M.S reducer 16mm thick, 1 noM.S. well cap 12mm thick , 10 no M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc comp in all respect . 196 150mm dia MSERW 7.1mm thick plain /slotted pipe including with 20 no M.S ring 100X12mmthick , 1 noM.S. bail plug , 08 no center guide etc comp in all respect. 197 LOWERING OF T/W ASSEMBLY 198 Lowering of 300mm X 150mm dia tube well assembly in bore hole and shrouding of pea gravel between annular space ofbore hole and T.W. assembly from G.L. to 165m BGL. 199 Lowering of 300mm dia MSERW 7.1mm thick plain pipe from GL to 54m BGL. 200 Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 55m BGL to 100m BGL. 201 Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 100m BGL to 150m BGL. 202 PEA-GRAVEL 203 Supply of 1.6 - 4.8 mm size Lal Kuwan Quarry Pea-Gravel Duly Washed,Screened and properly Stacked at Site. 204 DEVELOPMENT OF TUBE WELL 205 Development of tube well by 250 PSI air compressor 206 Development of tube well by 250 PSI air compressor 207 Development of tube well by 3 cusec O.P. Unit 208 Development of tube well by 3 cusec O.P. Unit. 209 TEST 210 Chemical and bacteriological test. 211 Pumping plant and Other instrumentation work 212 SITC of 1000 LPM, 55 m head 25 H.P. submersible pump set with 24 meter column pipe assembly, NRV, CI D/F Bend 90°, CI A/F Tee, D/F pipe (1.5m long 2 Nos and 1.0m long 1 No), Earthing, Painting Toolset, Power wiring of pump house internal and external, Chainpully block, and all Pumping plant accessories with nut bolts and rubber packing etc. Rates of items required for SCADA Automation of pumping plant are not included in these rates. 213 SITC of Automatic chlorination system SCADA Compatable chlorinating system. 214 Auto phase revarsal unit with inbuilt time delay & enclouser(confirm to IEC: IEC 60947-1 & IEC: 60947-b-1) 215 Supply & Erection of Servo Stabilizer of 40 KVA 216 Control panel with IP 54 Protection, industrial grade for all equipment. Separate for control(24V) and power equipments. 217 Soft Starter with Rs485 port-400 Class.30kw 218 CE / UL certified Intelligent smart energy meter 219 Motor OperatedActuator with Sluice Valve (upto 150mm) 220 CE / UL certified Electromagneticflowmeter of size: upto 150mm 221 CE / UL certified Hydrostatatic type sub soil water level transmitter 222 CE / UL certified Pressure Transmitter 223 pumping plant for Existing T/W 224 SITC of 1500 LPM, 55 m head 30 H.P. submersible pump set with 24 meter column pipe assembly, NRV, CI D/F Bend 90°, CI A/F Tee, D/F pipe (1.5m long 2 Nos and 1.0m long 1 No), Earthing, Painting Toolset, Power wiring of pump house internal and external, Chainpully block, and all Pumping plant accessories with nut bolts and rubber packing etc. Rates of items required for SCADA Automation of pumping plant are not included in these rates. 225 SITC of Automatic chlorination system SCADA Compatable chlorinating system. 226 Auto phase revarsal unit with inbuilt time delay & enclouser(confirm to IEC: IEC 60947-1 & IEC: 60947-b-1) 227 Supply & Erection of Servo Stabilizer of 40 KVA 228 Control panel with IP 54 Protection, industrial grade for all equipment. Separate for control(24V) and power equipments. 229 Soft Starter with Rs485 port-400 Class.30kw 230 CE / UL certified Intelligent smart energy meter 231 Motor OperatedActuator with Sluice Valve (upto 150mm) 232 CE / UL certified Electromagneticflowmeter of size: upto 150mm 233 CE / UL certified Hydrostatatic type sub soil water level transmitter 234 CE / UL certified Pressure Transmitter 235 Cable Laying Work For Rebore Tubewell 236 Supply of Aluminium conductor PVC insulated Armoured served sheathed cables 1100 volts grade. 2R x 3.5 Core x 25 sq. mm. (U.P. PWD S.O.R Year 2018 for electrical worksChapter 5-Item No 501(J)). 237 Cable laying from old pump house to Rebore tubewell of 25 sq. mm aluminium armoured cable. (U.P. PWD S.O.R Year 2018 for electrical worksChapter 5-Item No 501(J)). 238 Complete cabling for Tubewell including all power and control cables of all equipment at pump house.( Jal Nigam E/M SOR Year- 2020 Scada automation items Sr.No. 14(i)) 239 Installation, commissioning and testing of SCADA Automation System at Rebore Tubewell.( Jal Nigam E/M SOR Year- 2020 Scada automation items Sr.No. 16). 240 SCADAAUTOMATION OFRebore and Old Existing Tubewell 241 SCADAAUTOMATION ITEMS 242 CE & UL approved manufacturer’s RTU/ PLC in IP 65 encloser suitable to communicate with GSM based modem unit with CPU and power supply with analog and digital parameter and features as specified, onefor each tubewellto store and transmit data on GSM backbone. RTU/PLC designed with logic to transfer data at multiple stations 243 G.S.M./G.P.R.S. based wireless communication with 4G Modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations, all accessories included with signal enhancer anteena made for pumping plant 244 CE/UL certified 7 HMI touch screen suitable to communicate with PLC/RTU for local display & control of process parameters. 245 CE / UL certified Surge protector for control panel 246 Complete cabling for all equipments at pumphouse 247 Control panel with IP 54 protection, industrial grade fro all equipments (separate for control (24V) and power equipments. 248 Installation, commissioning & testing 249 Trial run for 3 months period for one T/W 250 Instrumentation Item for(OLD) Existing Tubewell 251 Motor OperatedActuator with Sluice Valve (150mm) 252 CE / UL certified Electromagneticflowmeter of size:150mm 253 Auto phase revarsal unit with inbuilt time delay & enclouser(confirm to IEC: IEC 60947-1 & IEC: 60947-b-1) 254 SITC of Automatic chlorination system SCADA Compatable chlorinating system. 255 CE / UL certified Hydrostatatic type sub soil water level transmitter 256 CE / UL certified Pressure Transmitter 257 CE / UL certified Intelligent smart energy meter 258 soft starter with RS485 Port- 400V Clas, 22KW, Rating 259 Supply & Erection of Servo Stabilizer of 40 KVA 260 Automation of OHT 261 Motor operatedActuator with Sluice valve 400mm Size 262 Electromagnetic Flowmeter of 400mm Size 263 CE/UL Certified Radar type level transmittor for OHT 264 ZONE-III 265 Transportation 266 Rig Machine 267 Transportation of Rig m/c and its T&P including Erection and Dismantling of Rig m/c. 268 Transportation of 250 psi compressor including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 269 O.P.Unit 270 Transportation of 2/3 cusec op unit including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 271 Drilling of Bore 272 Logging of bore hole by departmental/approved electric logger. 273 Drilling of 600mm dia bore from G.L. to 60m BGL. 274 Drilling of 500mm dia bore from 61m BGL to 100m BGL. 275 Drilling of 500mm dia bore from 100m BGL to 165m BGL. 276 TUBEWELL ASSEMBLY 277 300mm dia size MSERW housing pipe 7.1mm thick including with 1 no 300 X 200mm dia M.S reducer 16mm thick, 1 noM.S. well cap 12mm thick , 10 no M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc comp in all respect . 278 200mm dia MSERW 7.1mm thick plain /slotted pipe including with 20 no M.S ring 100X12mmthick , 1 noM.S. bail plug , 08 no center guide etc comp in all respect. 279 LOWERING OF T/W ASSEMBLY 280 Lowering of 300mm X 200mm dia tube well assembly in bore hole and shrouding of pea gravel between annular space ofbore hole and T.W. assembly from G.L. to 165m BGL. 281 Lowering of 300mm dia MSERW 7.1mm thick plain pipe from GL to 54m BGL. 282 Lowering of 200mm dia MSERW plain/slotted pipe 7.1mm thick from 55m BGL to 100m BGL. 283 Lowering of 200mm dia MSERW plain/slotted pipe 7.1mm thick from 100m BGL to 150m BGL. 284 PEA-GRAVEL 285 Supply of 1.6 - 4.8 mm size Lal Kuwan Quarry Pea-Gravel Duly Washed,Screened and properly Stacked at Site. 286 DEVELOPMENT OF TUBE WELL 287 Development of tube well by 250 PSI air compressor 288 Development of tube well by 250 PSI air compressor 289 Development of tube well by 3 cusec O.P. Unit 290 Development of tube well by 3 cusec O.P. Unit. 291 TEST 292 Chemical and bacteriological test. 293 Pumping plant and Other instrumentation work 294 SITC of 1500 LPM, 55 m head 30 H.P. submersible pump set with 24 meter column pipe assembly, NRV, CI D/F Bend 90°, CI A/F Tee, D/F pipe (1.5m long 2 Nos and 1.0m long 1 No), Earthing, Painting Toolset, Power wiring of pump house internal and external, Chainpully block, and all Pumping plant accessories with nut bolts and rubber packing etc. Rates of items required for SCADA Automation of pumping plant are not included in these rates. 295 SITC of Automatic chlorination system SCADA Compatable chlorinating system. 296 Auto phase revarsal unit with inbuilt time delay & enclouser(confirm to IEC: IEC 60947-1 & IEC: 60947-b-1) 297 Supply & Erection of Servo Stabilizer of 40 KVA 298 Control panel with IP 54 Protection, industrial grade for all equipment. Separate for control(24V) and power equipments. 299 Soft Starter with Rs485 port-400 Class.30kw 300 CE / UL certified Intelligent smart energy meter 301 Motor OperatedActuator with Sluice Valve (upto 150mm) 302 CE / UL certified Electromagneticflowmeter of size: upto 150mm 303 CE / UL certified Hydrostatatic type sub soil water level transmitter 304 CE / UL certified Pressure Transmitter 305 SCADA OF AUTOMATION 306 SCADAAUTOMATION ITEMS 307 CE & UL Certified PLC/RTU in IP 54 enclosure suitable to Communicate with GSM based modemunit with CPU & Power supply with analog & digital parameter & fetures as specified for each tubewell/OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified also enabled with UPS for power backup upto 2Hrs & automatic on/off switching arrangement. 308 G.S.M/G.P.R.S based wireless communication 4G Modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification. 309 CE/UL Certified Surge protector for control panel 310 Complete cabling for all equipments at pump house 311 Control panel with IP 54 protection, industrial grade for all equipment (Separate for control (24V) and power equipment). 312 Installation, commissioing & testing for one tubewell 313 Trial Run for 3 month period for one tubewell 314 Automation of OHT 315 Motor operatedActuator with Sluice valve 350mm Size 316 Electromagnetic Flowmeter of 350mm Size 317 CE/UL Certified Radar type level transmittor for OHT 318 Three Month Trial & Run for 03 Month 319 ZONE-IV 320 Transportation 321 Rig Machine 322 Transportation of Rig m/c and its T&P including Erection and Dismantling of Rig m/c. 323 Transportation of 250 psi compressor including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 324 O.P.Unit 325 Transportation of 2/3 cusec op unit including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 326 Drilling of Bore 327 Logging of bore hole by departmental/approved electric logger. 328 Drilling of 600mm dia bore from G.L. to 60m BGL. 329 Drilling of 500mm dia bore from 61m BGL to 100m BGL. 330 Drilling of 500mm dia bore from 100m BGL to 165m BGL. 331 TUBEWELL ASSEMBLY 332 300mm dia size MSERW housing pipe 7.1mm thick including with 1 no 300 X 200mm dia M.S reducer 16mm thick, 1 noM.S. well cap 12mm thick , 10 no M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc comp in all respect . 333 200mm dia MSERW 7.1mm thick plain /slotted pipe including with 20 no M.S ring 100X12mmthick , 1 noM.S. bail plug , 08 no center guide etc comp in all respect. 334 LOWERING OF T/W ASSEMBLY 335 Lowering of 300mm X 200mm dia tube well assembly in bore hole and shrouding of pea gravel between annular space ofbore hole and T.W. assembly from G.L. to 165m BGL. 336 Lowering of 300mm dia MSERW 7.1mm thick plain pipe from GL to 54m BGL. 337 Lowering of 200mm dia MSERW plain/slotted pipe 7.1mm thick from 55m BGL to 100m BGL. 338 Lowering of 200mm dia MSERW plain/slotted pipe 7.1mm thick from 100m BGL to 150m BGL. 339 PEA-GRAVEL 340 Supply of 1.6 - 4.8 mm size Lal Kuwan Quarry Pea-Gravel Duly Washed,Screened and properly Stacked at Site. 341 DEVELOPMENT OF TUBE WELL 342 Development of tube well by 250 PSI air compressor 343 Development of tube well by 250 PSI air compressor 344 Development of tube well by 3 cusec O.P. Unit 345 Development of tube well by 3 cusec O.P. Unit. 346 TEST 347 Chemical and bacteriological test. 348 Pumping plant and Other instrumentation work 349 SITC of 1500 LPM, 55 m head 30 H.P. submersible pump set with 24 meter column pipe assembly, NRV, CI D/F Bend 90°, CI A/F Tee, D/F pipe (1.5m long 2 Nos and 1.0m long 1 No), Earthing, Painting Toolset, Power wiring of pump house internal and external, Chainpully block, and all Pumping plant accessories with nut bolts and rubber packing etc. Rates of items required for SCADA Automation of pumping plant are not included in these rates. 350 SITC of Automatic chlorination system SCADA Compatable chlorinating system. 351 Auto phase revarsal unit with inbuilt time delay & enclouser(confirm to IEC: IEC 60947-1 & IEC: 60947-b-1) 352 Supply & Erection of Servo Stabilizer of 40 KVA 353 Control panel with IP 56 Protection, industrial grade for all equipment. Separate for control(24v) and power equipments. 354 Soft Starter with Rs485 port-400 Class. 30kw Rating 355 CE / UL certified Intelligent smart energy meter 356 Motor OperatedActuator with Sluice Valve (upto 150mm) 357 CE / UL certified Electromagneticflowmeter of size: upto 150mm 358 CE / UL certified Hydrostatatic type sub soil water level transmitter 359 CE / UL certified Pressure Transmitter 360 SCADA OF AUTOMATION 361 SCADAAUTOMATION ITEMS 362 CE & UL Certified PLC/RTU in IP 54 enclosure suitable to Communicate with GSM based modemunit with CPU & Power supply with analog & digital parameter & fetures as specified for each tubewell/OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified also enabled with UPS for power backup upto 2Hrs & automatic on/off switching arrangement. 363 G.S.M/G.P.R.S based wireless communication 4G Modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification. 364 CE/UL Certified Surge protector for control panel 365 Complete cabling for all equipments at pump house 366 Control panel with IP 54 protection, industrial grade for all equipment (Separate for control (24V) and power equipment). 367 Installation, commissioing & testing for one tubewell 368 Trial Run for 3 month period for one tubewell 369 Master control station (MCS) 370 SCADA DISPLAY 371 CE/UL & BIS Certified industrial gradeLED MONITOR with latest configuration as per specification. 372 (i) 65LED MONITOR With latest configuration 373 CE/UL/&BIS certified industrial grade large video screen(LVS)with latest configuration of LED type LFD ad per specificatio, MATRIX of 55 each panel. 374 (I)2x2 Matrix (4 panel) 375 Video wall media player of same OEM. 376 Desktop/PC with i5/i7 prosessor for as per spec mentioned in technical bid document. 377 CE/UL Cerfified 5 KVA UPS with batteries as per spec mentioned in technical bid document. 378 Full development version of reqrired TAGS SCADA Software with counstomization of software for MCS as per requirement as per spec mentioned in technical bid documents. 379 CE/UL certified master control room PLC with redundant CPU & power supply at MCS in IP54 enclouser as spec mentioned in technical bid documents. 380 EC/UL certified Field gateway agent for transfering data from MCS to Central control room. 381 GSM based wireless/Broadband/Equipment communication system for PLC capable to tranfer & received data & gather data from remote sited to control station, All accessoried included signal enhancer antenna along with running expences till DLP. 382 CE/UL Certified Firewall for network protection. 383 SURGE PROTECTOR FOR ETHERNET communication protection. 384 CE/UL certified industrial grade Ethernedt Switch 385 Mobile App Facility system architecture (industries internet baded & viewed through mobile apps for increased local & Remote Visibility). 386 Canon/HP or eqrivalent Laser Printe 1018 or equivement. 387 Security Surveillance IP camera with recorded (optional). 388 Installation, Commissioning & testing inclidung required funiture, A/c etc. 389 Trial run for 3 month period. 390 Automation of OHT 391 Motor operatedActuator with Sluice valve 400mm Size 392 Electromagnetic Flowmeter of 400mm Size 393 CE/UL Certified Radar type level transmittor for OHT 394 Three Month Trial & Run for 03 Month 395 ZONE-V 396 Transportation 397 Rig Machine 398 Transportation of Rig m/c and its T&P including Erection and Dismantling of Rig m/c. 399 Transportation of 250 psi compressor including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 400 O.P.Unit 401 Transportation of 2/3 cusec op unit including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 402 Drilling of Bore 403 Logging of bore hole by departmental/approved electric logger. 404 Drilling of 600mm dia bore from G.L. to 60m BGL. 405 Drilling of 500mm dia bore from 61m BGL to 100m BGL. 406 Drilling of 500mm dia bore from 100m BGL to 165m BGL. 407 TUBEWELL ASSEMBLY 408 300mm dia size MSERW housing pipe 7.1mm thick including with 1 no 300 X 200mm dia M.S reducer 16mm thick, 1 noM.S. well cap 12mm thick , 10 no M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc comp in all respect . 409 200mm dia MSERW 7.1mm thick plain /slotted pipe including with 20 no M.S ring 100X12mmthick , 1 noM.S. bail plug , 08 no center guide etc comp in all respect. 410 LOWERING OF T/W ASSEMBLY 411 Lowering of 300mm X 200mm dia tube well assembly in bore hole and shrouding of pea gravel between annular space ofbore hole and T.W. assembly from G.L. to 165m BGL. 412 Lowering of 300mm dia MSERW 7.1mm thick plain pipe from GL to 54m BGL. 413 Lowering of 200mm dia MSERW plain/slotted pipe 7.1mm thick from 55m BGL to 100m BGL. 414 Lowering of 200mm dia MSERW plain/slotted pipe 7.1mm thick from 100m BGL to 150m BGL. 415 PEA-GRAVEL 416 Supply of 1.6 - 4.8 mm size Lal Kuwan Quarry Pea-Gravel Duly Washed,Screened and properly Stacked at Site. 417 DEVELOPMENT OF TUBE WELL 418 Development of tube well by 250 PSI air compressor 419 Development of tube well by 250 PSI air compressor 420 Development of tube well by 3 cusec O.P. Unit 421 Development of tube well by 3 cusec O.P. Unit. 422 TEST 423 Chemical and bacteriological test. 424 Pumping plant and Other instrumentation work 425 SITC of 1500 LPM, 55 m head 30 H.P. submersible pump set with 24 meter column pipe assembly, NRV, CI D/F Bend 90°, CI A/F Tee, D/F pipe (1.5m long 2 Nos and 1.0m long 1 No), Earthing, Painting Toolset, Power wiring of pump house internal and external, Chainpully block, and all Pumping plant accessories with nut bolts and rubber packing etc. Rates of items required for SCADA Automation of pumping plant are not included in these rates. 426 SITC of Automatic chlorination system SCADA Compatable chlorinating system. 427 Auto phase revarsal unit with inbuilt time delay & enclouser(confirm to IEC: IEC 60947-1 & IEC: 60947-b-1) 428 Supply & Erection of Servo Stabilizer of 40 KVA 429 Control panel with IP 56 Protection, industrial grade for all equipment. Separate for control(24v) and power equipments. 430 Soft Starter with Rs485 port-400 Class. 30kw rating 431 CE / UL certified Intelligent smart energy meter 432 Motor OperatedActuator with Sluice Valve ( upto 150mm) 433 CE / UL certified Electromagneticflowmeter of size: upto 150mm 434 CE / UL certified Hydrostatatic type sub soil water level transmitter 435 CE / UL certified Pressure Transmitter 436 SCADA OF AUTOMATION 437 SCADAAUTOMATION ITEMS 438 CE & UL Certified PLC/RTU in IP 54 enclosure suitable to Communicate with GSM based modemunit with CPU & Power supply with analog & digital parameter & fetures as specified for each tubewell/OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified also enabled with UPS for power backup upto 2Hrs & automatic on/off switching arrangement. 439 G.S.M/G.P.R.S based wireless communication 4G Modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification. 440 CE/UL Certified Surge protector for control panel 441 Complete cabling for all equipments at pump house 442 Control panel with IP 54 protection, industrial grade for all equipment (Separate for control (24V) and power equipment). 443 Installation, commissioing & testing for one tubewell 444 Trial Run for 3 month period for one tubewell 445 Automation of OHT 446 Motor operatedActuator with Sluice valve 400mm Size 447 Electromagnetic Flowmeter of 400mm Size 448 CE/UL Certified Radar type level transmittor for OHT 449 Three Month Trial & Run for 03 Month 450 ZONE-VI (Rebore Tubewell) 451 Transportation 452 Rig Machine 453 Transportation of Rig m/c and its T&P including Erection and Dismantling of Rig m/c. 454 Transportation of 250 psi compressor including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 455 O.P.Unit 456 Transportation of 2/3 cusec op unit including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 457 Drilling of Bore 458 Logging of bore hole by departmental/approved electric logger. 459 Drilling of 600mm dia bore from G.L. to 60m BGL. 460 Drilling of 500mm dia bore from 61m BGL to 100m BGL. 461 Drilling of 500mm dia bore from 100m BGL to 165m BGL. 462 TUBEWELL ASSEMBLY 463 300mm dia size MSERW housing pipe 7.1mm thick including with 1 no 300 X 150mm dia M.S reducer 16mm thick, 1 noM.S. well cap 12mm thick , 10 no M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc comp in all respect . 464 150mm dia MSERW 7.1mm thick plain /slotted pipe including with 20 no M.S ring 100X12mmthick , 1 noM.S. bail plug , 08 no center guide etc comp in all respect. 465 LOWERING OF T/W ASSEMBLY 466 Lowering of 300mm X 150mm dia tube well assembly in bore hole and shrouding of pea gravel between annular space ofbore hole and T.W. assembly from G.L. to 165m BGL. 467 Lowering of 300mm dia MSERW 7.1mm thick plain pipe from GL to 54m BGL. 468 Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 55m BGL to 100m BGL. 469 Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 100m BGL to 150m BGL. 470 PEA-GRAVEL 471 Supply of 1.6 - 4.8 mm size Lal Kuwan Quarry Pea-Gravel Duly Washed,Screened and properly Stacked at Site. 472 DEVELOPMENT OF TUBE WELL 473 Development of tube well by 250 PSI air compressor 474 Development of tube well by 250 PSI air compressor 475 Development of tube well by 3 cusec O.P. Unit 476 Development of tube well by 3 cusec O.P. Unit. 477 TEST 478 Chemical and bacteriological test. 479 Pumping plant and Other instrumentation work 480 SITC of 1000 LPM, 55 m head 25 H.P. submersible pump set with 24 meter column pipe assembly, NRV, CI D/F Bend 90°, CI A/F Tee, D/F pipe (1.5m long 2 Nos and 1.0m long 1 No), Earthing, Painting Toolset, Power wiring of pump house internal and external, Chainpully block, and all Pumping plant accessories with nut bolts and rubber packing etc. Rates of items required for SCADA Automation of pumping plant are not included in these rates. 481 SITC of Automatic chlorination system SCADA Compatable chlorinating system. 482 Auto phase revarsal unit with inbuilt time delay & enclouser(confirm to IEC: IEC 60947-1 & IEC: 60947-b-1) 483 Supply & Erection of Servo Stabilizer of 40 KVA 484 Control panel with IP 54 Protection, industrial grade for all equipment. Separate for control(24V) and power equipments. 485 Soft Starter with Rs485 port-400 Class.30kw 486 CE / UL certified Intelligent smart energy meter 487 Motor OperatedActuator with Sluice Valve (upto 150mm) 488 CE / UL certified Electromagneticflowmeter of size: upto 150mm 489 CE / UL certified Hydrostatatic type sub soil water level transmitter 490 CE / UL certified Pressure Transmitter 491 SCADA OF AUTOMATION OF REBORE TUBEWELL(OLD EXISTING TUBEWELL) 492 SCADAAUTOMATION ITEMS 493 CE & UL approved manufacturer’s RTU/ PLC in IP 65 encloser suitable to communicate with GSM based modem unit with CPU and power supply with analog and digital parameter and features as specified, onefor each tubewellto store and transmit data on GSM backbone. RTU/PLC designed with logic to transfer data at multiple stations 494 G.S.M./G.P.R.S. based wireless communication with 4G Modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations, all accessories included with signal enhancer anteena made for pumping plant 495 CE/UL certified 7 HMI touch screen suitable to communicate with PLC/RTU for local display & control of process parameters. 496 CE / UL certified Surge protector for control panel 497 Complete cabling for all equipments at pumphouse 498 Control panel with IP 54 protection, industrial grade fro all equipments (separate for control (24V) and power equipments. 499 Installation, commissioning & testing 500 Trial run for 3 months period for one T/W 501 Instrumentation Item for (OLD) Existing Tubewell 502 Motor OperatedActuator with Sluice Valve (150mm) 503 CE / UL certified Electromagneticflowmeter of size:150mm 504 SITC of Automatic chlorination system SCADA Compatable chlorinating system. 505 Auto phase revarsal unit with inbuilt time delay & enclouser(confirm to IEC: IEC 60947-1 & IEC: 60947-b-1) 506 CE / UL certified Hydrostatatic type sub soil water level transmitter 507 CE / UL certified Pressure Transmitter 508 CE / UL certified Intelligent smart energy meter 509 soft starter with RS485 Port- 400V Clas, 22KW, Rating 510 Supply & Erection of Servo Stabilizer of 40 KVA 511 Cable Laying Work For Rebore Tubewell 512 Supply of Aluminium conductor PVC insulated Armoured served sheathed cables 1100 volts grade. 2R x 3.5 Core x 25 sq. mm. (U.P. PWD S.O.R Year 2018 for electrical worksChapter 5-Item No 501(J)). 513 Cable laying from old pump house to Rebore tubewell of 25 sq. mm aluminium armoured cable. (U.P. PWD S.O.R Year 2018 for electrical worksChapter 5-Item No 501(J)). 514 Complete cabling for Tubewell including all power and control cables of all equipment at pump house.( Jal Nigam E/M SOR Year- 2020 Scada automation items Sr.No. 14(i)) 515 Installation, commissioning and testing of SCADA Automation System at Rebore Tubewell.( Jal Nigam E/M SOR Year- 2020 Scada automation items Sr.No. 16). 516 Automation of OHT 517 Motor operatedActuator with Sluice valve 300mm Size 518 Electromagnetic Flowmeter of 300mm Size 519 CE/UL Certified Radar type level transmittor for OHT 520 ZONE-VII 521 Transportation 522 Rig Machine 523 Transportation of Rig m/c and its T&P including Erection and Dismantling of Rig m/c. 524 Transportation of 250 psi compressor including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 525 O.P.Unit 526 Transportation of 2/3 cusec op unit including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 527 Drilling of Bore 528 Logging of bore hole by departmental/approved electric logger. 529 Drilling of 600mm dia bore from G.L. to 60m BGL. 530 Drilling of 500mm dia bore from 61m BGL to 100m BGL. 531 Drilling of 500mm dia bore from 100m BGL to 165m BGL. 532 TUBEWELL ASSEMBLY 533 300mm dia size MSERW housing pipe 7.1mm thick including with 1 no 300 X 200mm dia M.S reducer 16mm thick, 1 noM.S. well cap 12mm thick , 10 no M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc comp in all respect . 534 200mm dia MSERW 7.1mm thick plain /slotted pipe including with 20 no M.S ring 100X12mmthick , 1 noM.S. bail plug , 08 no center guide etc comp in all respect. 535 LOWERING OF T/W ASSEMBLY 536 Lowering of 300mm X 200mm dia tube well assembly in bore hole and shrouding of pea gravel between annular space ofbore hole and T.W. assembly from G.L. to 165m BGL. 537 Lowering of 300mm dia MSERW 7.1mm thick plain pipe from GL to 54m BGL. 538 Lowering of 200mm dia MSERW plain/slotted pipe 7.1mm thick from 55m BGL to 100m BGL. 539 Lowering of 200mm dia MSERW plain/slotted pipe 7.1mm thick from 100m BGL to 150m BGL. 540 PEA-GRAVEL 541 Supply of 1.6 - 4.8 mm size Lal Kuwan Quarry Pea-Gravel Duly Washed,Screened and properly Stacked at Site. 542 DEVELOPMENT OF TUBE WELL 543 Development of tube well by 250 PSI air compressor 544 Development of tube well by 250 PSI air compressor 545 Development of tube well by 3 cusec O.P. Unit 546 Development of tube well by 3 cusec O.P. Unit. 547 TEST 548 Chemical and bacteriological test. 549 Pumping plant and Other instrumentation work 550 SITC of 1500 LPM, 55 m head 30 H.P. submersible pump set with 24 meter column pipe assembly, NRV, CI D/F Bend 90°, CI A/F Tee, D/F pipe (1.5m long 2 Nos and 1.0m long 1 No), Earthing, Painting Toolset, Power wiring of pump house internal and external, Chainpully block, and all Pumping plant accessories with nut bolts and rubber packing etc. Rates of items required for SCADA Automation of pumping plant are not included in these rates. 551 SITC of Automatic chlorination system SCADA Compatable chlorinating system. 552 Auto phase revarsal unit with inbuilt time delay & enclouser(confirm to IEC: IEC 60947-1 & IEC: 60947-b-1) 553 Supply & Erection of Servo Stabilizer of 40 KVA 554 Control panel with IP 54 Protection, industrial grade for all equipment. Separate for control(24V) and power equipments. 555 Soft Starter with Rs485 port-400 Class.30kw 556 CE / UL certified Intelligent smart energy meter 557 Motor OperatedActuator with Sluice Valve (upto 150mm) 558 CE / UL certified Electromagneticflowmeter of size: upto 150mm 559 CE / UL certified Hydrostatatic type sub soil water level transmitter 560 CE / UL certified Pressure Transmitter 561 SCADA OF AUTOMATION 562 SCADAAUTOMATION ITEMS 563 CE & UL Certified PLC/RTU in IP 54 enclosure suitable to Communicate with GSM based modemunit with CPU & Power supply with analog & digital parameter & fetures as specified for each tubewell/OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified also enabled with UPS for power backup upto 2Hrs & automatic on/off switching arrangement. 564 G.S.M/G.P.R.S based wireless communication 4G Modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification. 565 CE/UL Certified Surge protector for control panel 566 Complete cabling for all equipments at pump house 567 Control panel with IP 54 protection, industrial grade for all equipment (Separate for control (24V) and power equipment). 568 Installation, commissioing & testing for one tubewell 569 Trial Run for 3 month period for one tubewell 570 Automation of OHT 571 Motor operatedActuator with Sluice valve 350mm Size 572 Electromagnetic Flowmeter of 350mm Size 573 CE/UL Certified Radar type level transmittor for OHT 574 Three Month Trial & Run for 03 Month 575 ZONE-VIII 576 SCADAAUTOMATION OF (OLD Tubewell) 577 SCADAAUTOMATION ITEMS 578 CE & UL Certified PLC/RTU in IP 54 enclosure suitable to Communicate with GSM based modemunit with CPU & Power supply with analog & digital parameter & fetures as specified for each tubewell/OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified also enabled with UPS for power backup upto 2Hrs & automatic on/off switching arrangement. 579 G.S.M/G.P.R.S based wireless communication 4G Modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification. 580 CE/UL certified 7 HMI touch screen suitable to communicate with PLC/RTU for local display and control of process parameters. 581 CE/UL Certified Surge protector for control panel 582 Complete cabling for all equipments at pump house 583 Control panel with IP 54 protection, industrial grade for all equipment (Separate for control (24V) and power equipment). 584 Installation, commissioing & testing for one tubewell 585 Trial Run for 3 month period for one tubewell 586 Instrumentation Item for(OLD) Existing Tubewell 587 Motor OperatedActuator with Sluice Valve (150mm) 588 CE / UL certified Electromagneticflowmeter of size:150mm 589 SITC of Automatic chlorination system SCADA Compatable chlorinating system. 590 Auto phase revarsal unit with inbuilt time delay & enclouser(confirm to IEC: IEC 60947-1 & IEC: 60947-b-1) 591 CE / UL certified Hydrostatatic type sub soil water level transmitter 592 CE / UL certified Pressure Transmitter 593 CE / UL certified Intelligent smart energy meter 594 soft starter with RS485 Port- 400V Clas, 22KW, Rating 595 Supply & Erection of Servo Stabilizer of 40 KVA 596 Automation of OHT 597 Motor operatedActuator with Sluice valve 400mm Size 598 Electromagnetic Flowmeter of 400mm Size 599 CE/UL Certified Radar type level transmittor for OHT 600 ZONE-IX 601 Transportation 602 Rig Machine 603 Transportation of Rig m/c and its T&P including Erection and Dismantling of Rig m/c. 604 Transportation of 250 psi compressor including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 605 O.P.Unit 606 Transportation of 2/3 cusec op unit including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 607 Drilling of Bore 608 Logging of bore hole by departmental/approved electric logger. 609 Drilling of 600mm dia bore from G.L. to 60m BGL. 610 Drilling of 500mm dia bore from 61m BGL to 100m BGL. 611 Drilling of 500mm dia bore from 100m BGL to 165m BGL. 612 TUBEWELL ASSEMBLY 613 300mm dia size MSERW housing pipe 7.1mm thick including with 1 no 300 X 200mm dia M.S reducer 16mm thick, 1 noM.S. well cap 12mm thick , 10 no M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc comp in all respect . 614 200mm dia MSERW 7.1mm thick plain /slotted pipe including with 20 no M.S ring 100X12mmthick , 1 noM.S. bail plug , 08 no center guide etc comp in all respect. 615 LOWERING OF T/W ASSEMBLY 616 Lowering of 300mm X 200mm dia tube well assembly in bore hole and shrouding of pea gravel between annular space ofbore hole and T.W. assembly from G.L. to 165m BGL. 617 Lowering of 300mm dia MSERW 7.1mm thick plain pipe from GL to 54m BGL. 618 Lowering of 200mm dia MSERW plain/slotted pipe 7.1mm thick from 55m BGL to 100m BGL. 619 Lowering of 200mm dia MSERW plain/slotted pipe 7.1mm thick from 100m BGL to 150m BGL. 620 PEA-GRAVEL 621 Supply of 1.6 - 4.8 mm size Lal Kuwan Quarry Pea-Gravel Duly Washed,Screened and properly Stacked at Site. 622 DEVELOPMENT OF TUBE WELL 623 Development of tube well by 250 PSI air compressor 624 Development of tube well by 250 PSI air compressor 625 Development of tube well by 3 cusec O.P. Unit 626 Development of tube well by 3 cusec O.P. Unit. 627 TEST 628 Chemical and bacteriological test. 629 Pumping plant and Other instrumentation work 630 SITC of 1500 LPM, 55 m head 30 H.P. submersible pump set with 24 meter column pipe assembly, NRV, CI D/F Bend 90°, CI A/F Tee, D/F pipe (1.5m long 2 Nos and 1.0m long 1 No), Earthing, Painting Toolset, Power wiring of pump house internal and external, Chainpully block, and all Pumping plant accessories with nut bolts and rubber packing etc. Rates of items required for SCADA Automation of pumping plant are not included in these rates. 631 SITC of Automatic chlorination system SCADA Compatable chlorinating system. 632 Auto phase revarsal unit with inbuilt time delay & enclouser(confirm to IEC: IEC 60947-1 & IEC: 60947-b-1) 633 Supply & Erection of Servo Stabilizer of 40 KVA 634 Control panel with IP 56 Protection, industrial grade for all equipment. Separate for control(24v) and power equipments. 635 Soft Starter with Rs485 port-400 Class. 30kw Rating 636 CE / UL certified Intelligent smart energy meter 637 Motor OperatedActuator with Sluice Valve (upto 150mm) 638 CE / UL certified Electromagneticflowmeter of size: upto 150mm 639 CE / UL certified Hydrostatatic type sub soil water level transmitter 640 CE / UL certified Pressure Transmitter 641 SCADA OF AUTOMATION 642 SCADAAUTOMATION ITEMS 643 CE & UL Certified PLC/RTU in IP 54 enclosure suitable to Communicate with GSM based modemunit with CPU & Power supply with analog & digital parameter & fetures as specified for each tubewell/OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified also enabled with UPS for power backup upto 2Hrs & automatic on/off switching arrangement. 644 G.S.M/G.P.R.S based wireless communication 4G Modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification. 645 CE/UL Certified Surge protector for control panel 646 Complete cabling for all equipments at pump house 647 Control panel with IP 54 protection, industrial grade for all equipment (Separate for control (24V) and power equipment). 648 Installation, commissioing & testing for one tubewell 649 Trial Run for 3 month period for one tubewell 650 Automation of OHT 651 Motor operatedActuator with Sluice valve 400mm Size 652 Electromagnetic Flowmeter of 400mm Size 653 CE/UL Certified Radar type level transmittor for OHT 654 Three Month Trial & Run for 03 Month 655 ZONE-X 656 Transportation 657 Rig Machine 658 Transportation of Rig m/c and its T&P including Erection and Dismantling of Rig m/c. 659 Transportation of 250 psi compressor including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 660 O.P.Unit 661 Transportation of 2/3 cusec op unit including Loading , unloading, Erection, Dismantling & labour etc complete in all respect . 662 Drilling of Bore 663 Logging of bore hole by departmental/approved electric logger. 664 Drilling of 600mm dia bore from G.L. to 60m BGL. 665 Drilling of 500mm dia bore from 61m BGL to 100m BGL. 666 Drilling of 500mm dia bore from 100m BGL to 165m BGL. 667 TUBEWELL ASSEMBLY 668 300mm dia size MSERW housing pipe 7.1mm thick including with 1 no 300 X 200mm dia M.S reducer 16mm thick, 1 noM.S. well cap 12mm thick , 10 no M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc comp in all respect . 669 200mm dia MSERW 7.1mm thick plain /slotted pipe including with 20 no M.S ring 100X12mmthick , 1 noM.S. bail plug , 08 no center guide etc comp in all respect. 670 LOWERING OF T/W ASSEMBLY 671 Lowering of 300mm X 200mm dia tube well assembly in bore hole and shrouding of pea gravel between annular space ofbore hole and T.W. assembly from G.L. to 165m BGL. 672 Lowering of 300mm dia MSERW 7.1mm thick plain pipe from GL to 54m BGL. 673 Lowering of 200mm dia MSERW plain/slotted pipe 7.1mm thick from 55m BGL to 100m BGL. 674 Lowering of 200mm dia MSERW plain/slotted pipe 7.1mm thick from 100m BGL to 150m BGL. 675 PEA-GRAVEL 676 Supply of 1.6 - 4.8 mm size Lal Kuwan Quarry Pea-Gravel Duly Washed,Screened and properly Stacked at Site. 677 DEVELOPMENT OF TUBE WELL 678 Development of tube well by 250 PSI air compressor 679 Development of tube well by 250 PSI air compressor 680 Development of tube well by 3 cusec O.P. Unit 681 Development of tube well by 3 cusec O.P. Unit. 682 TEST 683 Chemical and bacteriological test. 684 Pumping plant and Other instrumentation work 685 SITC of 1500 LPM, 55 m head 30 H.P. submersible pump set with 24 meter column pipe assembly, NRV, CI D/F Bend 90°, CI A/F Tee, D/F pipe (1.5m long 2 Nos and 1.0m long 1 No), Earthing, Painting Toolset, Power wiring of pump house internal and external, Chainpully block, and all Pumping plant accessories with nut bolts and rubber packing etc. Rates of items required for SCADA Automation of pumping plant are not included in these rates. 686 SITC of Automatic chlorination system SCADA Compatable chlorinating system. 687 Auto phase revarsal unit with inbuilt time delay & enclouser(confirm to IEC: IEC 60947-1 & IEC: 60947-b-1) 688 Supply & Erection of Servo Stabilizer of 40 KVA 689 Control panel with IP 54 Protection, industrial grade for all equipment. Separate for control(24V) and power equipments. 690 Soft Starter with Rs485 port-400 Class.30kw 691 CE / UL certified Intelligent smart energy meter 692 Motor OperatedActuator with Sluice Valve (upto 150mm) 693 CE / UL certified Electromagneticflowmeter of size: upto 150mm 694 CE / UL certified Hydrostatatic type sub soil water level transmitter 695 CE / UL certified Pressure Transmitter 696 SCADA OF AUTOMATION 697 SCADAAUTOMATION ITEMS 698 CE & UL Certified PLC/RTU in IP 54 enclosure suitable to Communicate with GSM based modemunit with CPU & Power supply with analog & digital parameter & fetures as specified for each tubewell/OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified also enabled with UPS for power backup upto 2Hrs & automatic on/off switching arrangement. 699 G.S.M/G.P.R.S based wireless communication 4G Modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification. 700 CE/UL Certified Surge protector for control panel 701 Complete cabling for all equipments at pump house 702 Control panel with IP 54 protection, industrial grade for all equipment (Separate for control (24V) and power equipment). 703 Installation, commissioing & testing for one tubewell 704 Trial Run for 3 month period for one tubewell 705 Automation of OHT 706 Motor operatedActuator with Sluice valve 300mm Size 707 Electromagnetic Flowmeter of 300mm Size 708 CE/UL Certified Radar type level transmittor for OHT 709 Three Month Trial & Run for 03 Month
