Bids Are Invited For Construction Of Gate Near Ucil Jaduguda Hospital -1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil 110.00 Cum 2 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m 55.00 Cum 3 Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20% 5.00 litre 4 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL antitermite treatment (excluding the cost of chemical emulsion) : Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration 50.00 metre 5 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. 5.00 Cum 6 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) 8.00 Cum 7 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) 55.00 Cum 8 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) 25.00 Cum 9 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) 15.00 Cum 10 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). 25.00 Cum 11 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) 15.00 Cum 12 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) 50.00 Cum 13 Half brick masonry with common burnt clay F .P .S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) 100.00 sqm 14 Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete 78.00 Sqm 15 Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts 150.00 Sqm 16 Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform 70.00 sqm 17 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate 20.00 Sqm 18 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Hot rolled deformed bars 4500.00 Kg 19 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) Rates for external plastic are for height upto 10m from ground level in less otherwise stated 230.00 Sqm 20 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) Rates for external plastic are for height upto 10m from ground level in less otherwise stated 120.00 Sqm 21 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) Rates for external plastic are for height upto 10m from ground level in less otherwise stated 50.00 Sqm 22 Neat cement punning. 150.00 Sqm 23 White washing with lime to give an even shade : New work (three or more coats) mix with fevicol DDL and Robin Blue or as per direction of EIC 50.00 Sqm 24 Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm) 100.00 sqm 25 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer 120.00 Sqm 26 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 230.00 Sqm 27 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. Preferable make Dulux/Burger/Asian Paints or as per direction of EIC 500.00 Sqm 28 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 120.00 Sqm 29 Structural steel work in riveted, bolted or welded in build up section, trusses and faramed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 2200.00 kg 30 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 10.00 Sqm 31 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) 150.00 kg 32 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) 125.00 kg 33 Providing and fixing glazing in aluminium door , window , ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10 kg/ sqm) 2.00 sqm 34 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10 kg/ sqm) Subtract Float glass panes of nominal thickness 4 mm (weight not less than 10 kg/sqm) and Add Frosted glass sheet of nominal thickness 4 mm (weighing not less than 10 kg/sqm) 25.00 sqm 35 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10 kg/ sqm) Subtract Float glass panes of nominal thickness 4 mm (weight not less than 10 kg/sqm) and Add 4 mm thick ACP 35.00 sqm 36 Filling the gap in between aluminium frame & adjacent RCC/ Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width 50.00 metre 37 Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 100x75x4 mm 9.00 Each 38 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than gradeAC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. Complete 125 mm : 6.00 Each 39 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm 6.00 Each 40 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm 41 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make ( Somany/Kajaria/Nitco) in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 250.00 Sqm 42 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 500x500 mm 45.00 Sqm 43 Providing and fixing of Stainless steel name plate of UCIL , Jaduguda 1.00 each 44 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer- in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 100.00 kg 45 Supply and providing in position flower pots in vertical garden including plants and fillings as per approved layout and design complete including supplyng and fixing in position drip emitters (30mm dia) frame pot, plants, compost , medicine as per requirement for vertical Garden 220.00 sqft 46 supplying and placing Mexican Grass for vertical Garden 200.00 Nos 47 Supplying and placing Golden Dhuranta for vertical Garden 200.00 Nos 48 Supplying and fixing 16mm dia LDPE pipe for drop irrigation including all fittings for vertical Garden 1.00 Lumpsum 49 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. 50.00 sqm 50 Wiring for light/power plug with 2x4 sq. Mm FRLS PVC insulated copper conductor single core in surface/ recessed medium class PVC conduit along with 1 No. 4sq. Mm FRLS PVC insulated copper conductor single core cable for loop earthling as required 100.00 Metre 51 Wiring for circuit/ submain wring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2x2.5 sq.mm + 1x2.5sq. Mm earth wire 50.00 Metre 52 Supply and fixing of XLPE, conforming IS 7098 (part-1) latest, 1.1 KV armoured 4 core AL cable of 25 sqmm, cofirming IS 8130 latest, including all accesaries as per direction of EIC. 100.00 Metre 53 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required, 2 X 10 sq. mm + 1 X 6 sq. mm earth wire 30.00 Metre 54 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 4 Module (125mmx75mm) 6.00 Each 55 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 6 Module (200mmx75mm) 4.00 Each 56 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 12 Module (200mm x 150mm) 2.00 Each 57 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch 22.00 Each 58 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 A switch 8.00 Each 59 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 A socket outlet 4.00 Each 60 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 A socket outlet 4.00 Each 61 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 6.00 Each 62 3mm thick phenolic laminated sheet 200.00 sqcm 63 Installation, Testing, Commissioning of wall bracket /ceiling fittingsof all sizes and shapes containing upto two GLS/CFL/LED lamps perfitting, complete with all accessories including connections etc. As required. 10.00 Each 64 Fixing of copper/ G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run) 50.00 Metre 65 Fixing of copper/ G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run) 10.00 Metre 66 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. 4.00 Each 67 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. 3.00 Each 68 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min, 350 RPM (tolerance as per IS: 374-2019), suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 3.00 Each 69 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 3.00 Each 70 Supply and fixing of LED Bulb, W-14 or above of reputed brand as direction of EIC. 26.00 Each 71 Supplying and fixing brass batten/ angle holder including connections etc. As required 16.00 Each 72 Supplying and fixing following rating , double pole (single phase and neutral) 240V , residual current breaker (RCCB), having a sensitivity current 30 mA in the exiting MCB DB complete with connection , testing and commissioning etc. As required . 63 A 1.00 Each 73 Supply and fixing of single phase energy metter (kwh) with box of model no. 1PLCD meter 5-30A cat. No WM1018CSDL0BOK, make L&T 1.00 Nos 74 Supply and installation of heavy gauge sheet steel switch box consisting of 63A TPN switch fuse (HRC) unit with rubber gasketed hinged door and one knockout at bottom for entry of incoming cable of size 4 C X 50 mm2 aluminium armoured cable & 2 Nos. of 25 sq mm outgoing AL cables. The switch fuse unit shall be completed with quick make & quick break mechanism, danger notice plate, heavy duty brass neutral bar, cable box if required. The box should have ample space for cabling/ wiring 1.00 Each 75 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. As required. (But without MCB/RCCB/Isolator) 2 + 6 way, single door. 4.00 Each 76 Supplying and fixing 5A to 32A rating, 240/415V, 10KA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. As required. Single pole 6A 2.00 Each 77 Supplying and fixing 5A to 32A rating, 240/415V, 10KA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. As required. Single pole 16A 2.00 Each 78 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 4.00 Each 79 Providing and fixing of Crompton Gleam 70 Watt Outdoor Waterproof LED Flood Light | Wide Angle Beam| (Cool Day Light 6500K) 4.00 Nos 80 Providing and fixing of PHILIPS 1 8 Watt Black Reflector LED Ceiling COB Round Spot Light with Focused Beam | Cut Out: 1 38mm | Warm White 4.00 Nos 81 Providing and fixing of WIPRO Cool Day Light Ceramic Square LED surface ceiling Light WIPRO (WIPRO 2X2 PANEL 35/36W LED LUMINIARE RECESS LIGHT) 6.00 Nos 82 Providing and fixing of PHILIPS Globe Outdoor Gate Light | Modern Style Decorative Gate Light for Home | Holder: B22 | Total Quantity : 11394
