Tender For Supply Of Implants In Bmc Sagar , D.H.S. Plate Long/Short Barrel (38/25 Mm)With Round, D. C., Combi Hole 1250, 1300, 1350, 1400 Angle; 2, 3, 4, 5, 6, 8, 10, 12, 14, 16, 18 Holes , D.H.S Screw 22Mm /16Mm Threading With Compression Screw (Top-Bolt). (36 Mm) 50 To 115 Mm, In 5Mm Increments , Pediatric D.H.S. Set , D.C.S Plate (950) With Round, D. C., Combi Holes 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20, 22, 24 Holes , Angle Blade Plate (950) With Round, D. C., Combi Holes, Blade Size 50, 55, 60, 65, 70 & 75 Mm And 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18 Holes , Trochanteric Stabilisation Plate To Be Used With Dhs , Distal Femur Locking Compression Plate (Right & Left) Anatomical Pre-Shaped & Contoured With Self-Tapping Locking Head Screws; With Round Locking Holes For Metaphyseal Portion Of Plate & Combiholes For Shaft Of Plate. , Medial & Lateral Proximal Tibial Buttress Plate (T- & L- Shape)- As Per Ao Specifications. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes , Proximal Medial & Lateral Tibial Plate 3.5 Mm(Right & Left) Anatomically Pre Shaped And Low Profile. Two Different Plate Design For Left And Right Side With Indication On Side Of Plate. Plate Should Have 2 Mm Holes Forproximal Fixation With K-Wire And Sutures For Meniscal Repair. Holes Should Accept 3.5 Mm Locking Head Or 3.5 Mm Standard Cortical Screws From 4 To 20Holes With Increment Of 2 Holes. , Proximal Medial/ Lateral Tibial Locking Plate For 4.5 Mm Screws Anatomically Pre Shaped And Low Profile Design, Two Different Plate Design For Left And Right With Indication On Plate. Round Metaphyseal Locking Holes And Combi Holes In Shaft Portion For Locking And Standard Screws. Different Angulation In Proximal Part Of The Plate To Avoid Primary And Secondary Loss Of Reduction. Should Be Compatible For Less Invasive Technique Holes Should Accept 5 Mm Locking Head Or 6.5 Mm Standard Cancellousl Screwsfrom 5 To 13Holes , Hockey Plate For Tibia (Right & Left) 5, 7, 9, 11, 13, 15, 17 Holes , Contoured Medial/ Antero-Lateral Plate For Lower End Tibia 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes , Distal Medial Tibial Locking Plates 2.7/ 3.5 Mm. Anatomically Pre-Shaped And Low Profile And Specific For Right And Left Side With Indication Of Side On Plate, Compatible With Less Invasive Fixation. Rounded Edgesscrew Heads Should Be Received Into Distal Section Of Plate To Allow Multiple Locking Head Screw Placement Of 2.7/ 3.5 Mm To Provide Adequate Fixation Of Metaphyseal Portion Of Tibia, And Size 4 To 14 Holes With Increment Of 2 Holes. , Anterolateral Distal Tibial Locking Plate 3.5 Mm. Anatomically Pre Shaped And Low Profile And Specific For Right And Left Side With Indication Of Side On Plate. Plate Should Have Head Holes To Accept 3.5 Mm Locking Head Or Standard Cortical Or 4 Mm Standard Cancellous Screw. Head Should Be Received Into The Plate. Size From 5 To 21 Holes With Increment Of 2 Holes , Cobra Head Plate 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes , Cobra Head Locking Plate 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes , Hook Plate 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes , Hook Locking Plate 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes , Proximal Humerus Locking Plate (Philos Plate). Anatomically Pre-Countoured Plates, Should Have Precisely Fitting Sleeves For Precision Placement Ofscrews, Should Accept 3.5 Mm Locking Head Screws. The Screws Provided Should Be Available From 26 To 60 Mm Length. The Head Of The Plate Should Have Holes For Securing Tuberosities To The Plate With Sutures. Should Have Low Profile Of The Screws Heads To Prevent Tissue Irritation 3, 4, 5, 6, 7, 8, 9, 10, 12 Holes , (A) Anatomically Pre-Countoured Plates For Distal Medial Humerus For Anatomical Fit With Left & Right Version. Should Have Precisely Fitting Sleeves For Precision Placement Of Screws. Should Accept Self-Tapping Locking Head Screws. The Shaft Portions Of The Plate Should Have Combi Holes. Should Have Low Profile Of The Screws Heads To Prevent Tissue Irritation. 3, 5, 7, 9 & 14 Holes , (B) Dorso-Lateral Plates With & Without Lateral Support With Right & Left Versions. Anatomically Pre-Countoured Plates, The Shaft Portions Of The Plate Should Have Combi Holes. Should Have Low Profile Of The Screws Heads To Prevent Tissue Irritation.3, 5, 7, 9 & 14 Holes , Calcaneal Plate. , Calcaneal Locking Plates. , Anatomical Olecranon Locking Plate Of All Sizes. , Clavicle Locking Plate- Antero-Superior Type, Anterior Type , Clavicle Hook Plate. , Elise Plate/ Contoured Plate For Distal End Radius. 3, 4, 5, 6, 7, 8, 9, 10 Holes , Locking Elise Plate/ Contoured Locking Plate For Distal End Radius. 3, 4, 5, 6, 7, 8, 9, 10 Holes , Variable Angle Locking , H-Plate. 3, 4, 5, 6, 7, 8, 9, 10 Holes , Y- Plate. 3, 4, 5, 6, 7, 8, 9, 10 Holes , D.C.P. Small. 4, 5, 6, 7, 8, 9, 10, 12, 14 Holes , D.C.P. Narrow. 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes , D.C.P. Broad. 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes , L.C.D.C.P Small. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 Holes , L.C.D.C.P. Narrow. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes , L.C.D.C.P. Broad. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes , L.C.P Small. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 Holes , L.C.P. Narrow. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes , L.C.P. Broad. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 Holes , Semitubular Plates 4.5Mm. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 Holes , Semitubular Plates 3.5Mm. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 Holes , 1/3 Rd Tubular Plates 4.5Mm. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 Holes , 1/3 Rd Tubular Plates 3.5Mm. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 Holes , Quarter-Tubular Plates 2.7 Mm. 3, 4, 5, 6, 7, 8 Holes , Straight Mini Plates 2.0 Mm & 1.5 Mm With Screws. , Reconstuction Plates 3.5Mm. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 Holes , Reconstuction Locking Plates 3.5Mm. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 Holes , Reconstuction Plates 4.5Mm. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 Holes , Reconstuction Locking Plates 4.5Mm. 3, 4, 5, 6, 7, 8, 9, 10, 12, 14 Holes , Cortical Screw 4.5 Mm (Tpi- 20). 14, 16, 18 …60 Mm, In 2 Mm Increments. , Cortical Screw 3.5 Mm (Tpi- 20). 8, 10, 12 …60 Mm, In 2 Mm Increments. , Cortical Screw 2.7 Mm (Tpi- 20). 6, 8, 10 …30 Mm, In 2 Mm Increments. , Locking Cortical Screw 5.0 Mm. 14, 16, 18 …60 Mm, In 2 Mm Increments. , Locking Cortical Screw 3.5 Mm. 8, 10, 12 …60 Mm, In 2 Mm Increments. , Fully Threaded Cannulated Cancellous Screws 4Mm. 25, 30 ….115 Mm, In 5 Mm Increment , 16 Mm Threaded Cannulated Cancellous Screws 4 Mm. 25, 30 ….115 Mm, In 5 Mm Increment. , 32 Mm Threaded Cannulated Cancellous Screws 4 Mm 25, 30…….115 Mm, In 5 Mm Increment. , Fully Threaded Solid Cancellous Screws 4 Mm 25, 30…….115 Mm, In 5 Mm Increment , 16 Mm Threaded Solid Cancellous Screws 4 Mm 25, 30,…….115 Mm, In 5 Mm Increment , 32 Mm Threaded Solid Cancellous Screws 4 Mm 25, 30,…….115 Mm, In 5 Mm Increment , Fully Threaded Cannulated Cancellous Screws 6.5 Mm 25, 30,…….115 Mm, In 5 Mm Increment , 16 Mm Threaded Cannulated Cancellous Screws 6.5 Mm 25, 30,…….115 Mm, In 5 Mm Increment , 32 Mm Threaded Cannulated Cancellous Screws 6.5 Mm 25, 30,…….115 Mm, In 5 Mm Increment , Fully Threaded Solid Cancellous Screws 6.5 Mm (20 Tpi) 25, 30,…….115 Mm, In 5 Mm Increment , 16 Mm Threaded Solid Cancellous Screws 6.5 Mm (20 Tpi) 25, 30,…….115 Mm, In 5 Mm Increment , 32 Mm Threaded Solid Cancellous Screws 6.5 Mm (20 Tpi) 25, 30,…….115 Mm, In 5 Mm Increment , Fully Threaded Locking Cannulated Cancellous Screws 6.5 Mm 25, 30,…….115 Mm, In 5 Mm Increment , 16 Mm Threaded Locking Cannulated Cancellous Screws 6.5 Mm 25, 30,…….115 Mm, In 5 Mm Increment , 32 Mm Threaded Locking Cannulated Cancellous Screws 6.5 Mm 25, 30,…….115 Mm, In 5 Mm Increment , Fully Threaded Locking Solid Cancellous Screws 6.5 Mm 25, 30,…….115 Mm, In 5 Mm Increment , 16 Mm Threaded Locking Solid Cancellous Screws 6.5 Mm 25, 30,…….115 Mm, In 5 Mm Increment , 32 Mm Threaded Locking Solid Cancellous Screws 6.5 Mm 25, 30,…….115 Mm, In 5 Mm Increment , Washer Round, 13 Mm, 10 Mm, 7.0 Mm, 4.5 Mm. , Spiked Washer, 13.5 Mm, 8.0 Mm, 3.2 Mm. , Malleolar Screw,4.5 Mm 15, 20, 25,………100 Mm , Herbert’S Screw , Interlocking Femur Nail (As Per Ao Specifications) With Compatible Locking Bolts Of Diameter 8,9,10,11,12 Mm With Lengths From 340 To 440Mm. , Interlocking Solid Femur Nail (As Per Ao Specifications) With Compatible Locking Bolts Of Diameter 8,9,10,11,12 Mm With Lengths From 340 To 440Mm. , Recon Nail (Right & Left) (As Per Ao Specifications) With Compatible Locking Bolts Of Diameter 8,9,10,11,12 Mm With Lengths From 340 To 440Mm. , Proximal Femur Nail (P. F. N.) (As Per Ao Specifications) With Compatible Locking Bolts Of Diameter 8,9,10,11,12 Mm With Lengths From 340 To 440Mm. , Trochanteric Entry Femur Nails With Compatible Locking Bolts Of Diameter 8,9,10,11,12 Mm With Lengths From 340 To 440Mm. , Supracondylar Nail (As Per Ao Specifications) With Compatible Locking Bolts Of Diameter 10,11,12 Mm With Lengths M150,200,250,300 Mm . , Interlocking Tibia Nail (As Per Ao Specifications) With Compatible Locking Bolts Of Diameter 8,9,10,11 Mm With Lengths From 280 To 380 Mm. , Interlocking Distal Tibia Nail (As Per Ao Specifications) With Compatible Locking Bolts Of Diameter 8,9,10,11 Mm With Lengths From 280 To 380 Mm. , Interlocking High/Upper Bent Tibia Nail (As Per Ao Specifications) With Compatible Locking Bolts Of Diameter 8,9,10,11 Mm With Lengths From 280 To 380 Mm. , Interlocking Solid Tibia Nail (As Per Ao Specifications) With Compatible Locking Bolts Of Diameter 8,9,10,11 Mm With Lengths From 280 To 380 Mm. , Expert Tibial Nail (As Per Ao Specifications) With Compatible Locking Bolts Of Diameter 8,9,10,11 Mm With Lengths From 280 To 380 Mm. , Interlocking Humerus Nail (As Per Ao Specifications) With Compatible Locking Bolts Of Diameter 6,7, 8 Mm With Lengths From 200 To 300 Mm. , Interlocking Bolts2.9 Mm12 To 30 Mm , Interlocking Bolts3.9 Mm 14 To 48 Mm , Interlocking Bolts4.9 Mm 16 To 120 Mm , Proximal Bolt Recon (As Per Ao Specifications) Of Diameter 6.4Mm With Lengths From 60 To 110 Mm. , Proximal Bolt Recon Cannulated (As Per Ao Specifications) Of Diameter 6.4Mm With Lengths From 60 To 110 Mm. , Proximal Bolt P.F.N. Cannulated 6.4 Mm60 To 110 Mm , Proximal Bolt P.F.N. Cannulated8.0 Mm60 To 120 Mm , Kuntscher’S Nail Of 7, 8, 9, 10, 11, 12 Mm Diameter , V-Nail , Square Nail For Ulna Of2, 2.5, 3, 3.5 Mm Diameter , Square Nail For Radius Of2, 2.5, 3, 3.5 Mm Diameter , Rush Nail Of 2, 2.5, 3, 3.5 Mm Diameter , Ender’S Nail Of 2,2.5,3.0,3.5, 4, 4.5 Mm Diameter. , Titanium Elastic Nailing System (Tens) Of All Sizes. , Non Fenestrated Bipolar Prosthesis Of Sizes 37, 39,…………….51, 53 Mm , Fenestrated Bipolar Prosthesisof Sizes 37, 39,…………….51, 53 Mm , Bipolar Prosthesis With Modular Stem And Head. , Thompson Endo-Prosthesis Of Sizes 37, 39, 41, 43, 45, 47, 49, 51, 53 Mm. , Long/Shortstem Austin Moore Prosthesis Of Sizes 37, 39, 41, 43, 45, 47, 49, 51, 53 Mm. , Bone Cement (Price Tobe Quoted Separately For The Following 4 Items) :- Cement Gun Should Be Provide By The Dealer As Loan Instruments Without Extra Charges During Total Hip Replacement Surgeries. Cost Of Disposable Nozzle To Be Provided Separately . , 1. High Viscosity Poly Methyl Meth-Acrylate 40Gms With Working Time Of 5-6 Min. , 2. Medium To Low Viscosity Poly Methyl Meth-Acrylate 40Gms. , 3. High Viscosity Poly Methyl Meth-Acrylate 40Gms With Working Time Of 5-6 Min With Gentamycin. , 4. Medium To Low Viscosity Poly Methyl Meth-Acrylate 40Gms With Gentamycin. , Cement Stopperof Size 7,8,9……To………….16Mm , Calcium Sulphate Bone Substitutes , Cemented Totalhip Replacement :-*Stem Should Be As Per Standard Charnley’S Design With Metal Of Sufficent Strength To Withstand Life-Time Use In The Patients. Different Sizes And Offsets To Be Quoted.*Cup Of Polyethylene High Density High Molecular Weight Highly Crosslinked With Anti-Oxidative Manufacturing & Storing Process (To Increases The Shelf Life) With Different Offsets. *Cup Sizes : - 38 To 60 Mm Outer Diameter. *Modularity For Neck Length And Head Sizes 22, 28, 32 And 36 Mm. *Acetabular Component Should Be Metal Backed As Well As All Poly. Metal Back Should Have Modularity To Use Polyethylene As Well As Ceramic. All Polyethylene Liner As Well As Cups Should Be Made Of Highly Cross-Linked Highmolecular Weight Polyethylene With Measures To Prevent Oxidation . The Metal Used For Stem Should Be Of High Tensile Strength And Fatigue Strength Like Cobalt-Chrome. , Uncemented T.H.R :-*The Stem Of The Femoral Component Should Have Double Taper Geometry With Plasma Hydroxy-Appetite Coating With At Least Thickness Of The Coating Of 100 To 200 Microns Or Porous Coated With Sufficient Pore Size And Thickness Of Porous Coating To Have Optimal Bony Ingrowth. The Stem Should Accept Metal (Cobalt- Chrome) As Well As Ceramic Head (Alumina With Zirconia)*Cup Of Polyethylene High Density High Molecular Weight Highly Crosslinked With Anti-Oxidative Manufacturing & Storing Process (Toincreases The Shelf Life) With Different Offsets. Preferably The Cup Should Have Longer Posterior Wall With Flange For Cement Pressurization. Metal Back Cup With Plasma Hydroxy-Appetite Coating With Design To Lock Into The Host Bone To Provide Primary Fixation With Provision For Screw Fixation. Should Accept Liners Made Up Of Highly Cross-Linked High Molecular Weight Poly-Ethylene & Delta Ceramic (Alumina With Zirconia).*The Femoral Head Should Be Made Up Of Cobalt-Chrome Or Delta-Ceramic And Should Have Different Neck Length.*Metal Screws For Fixation Of Metal Cup.*The Prices Should Be Quoted Separately For Stems, Cups Liners Of Polyethylene And Ceramic As Per Specifications Mentioned Above And As Well As For Metal & Ceramic Heads Of Different Sizes As Per Specifications Quoted Above. , Revision T.H.R:-*Revision Stem, Modular Straight Cylindrical And Double Tapered, Porous & Hydroxy-Appetite Coated Of Different Lengths. The Diameter And Length Of The Stem Should Be Variable With A Provision To Address Curve Of The Femur With Long Stem. *Revision Cups To Be Provided With Large Diameter Of Upto 65 Mm With Augments For Bone Loss In The Form Of Cages And Metal Rings, As Well As, Wedges. All These To Be Quoted Separately. , Total Knee Replacement :- All Polyethylene & Metal Back. Mobile Bearing & Fixed Bearing Knees Highly Polished Tibial Tray To Prevent Back Wear In Fixed Bearing Knee. Pateller Component Should To Be Quoted Separately Cruciate-Retaining/ Cruciate-Scarificing Designs. For Revision, Constraint Designs With Intramedullary Extension . Designs For Achieving High Flexion. All Components Should Be Separately Quoted. Note:- Company Should Be Us-Fda /Ce/ Gmp Certified.. Should Provide A Technician Intraoperatively Wherever Applicable. Should Provide Suitable Size Cutting Saw With Drills (Pneumatic/Electric) , Wherever Applicable. Should Provide All The Complementary Instrumentation And Trials Given/Provided By The Manufacturing Company For The Application Of Implant During Operation. Catalogue/ List Of These Instrumentation And Trials Should Be Included In Tender Quotations. Only Those Joint Designs To Be Sent Which Have Had A Proven Field Record Of Longevity As Substantiated By Published Literature, The Tenderer Should Provide The Required Documents , Regular Shoulder Prosthesis & Reverse Shoulder Prosthesis (Prices To Be Quoted Separately) Of Size 35 Mm, 39 Mm , Total Elbow Prosthesis, Regular And Custom Made. , Radial Head Prosthesis Of Following Sizes :-16 Mm X 4 Mm X 6 Mm, 18 Mm X 4 Mm X 6 Mm, 18 Mm X 5 Mm X 6 Mm, 20 Mm X 5 Mm X 8 Mm , Continuous Loop Endobutton One Size Titanium Buttonwith Multiple Pre-Measured Loop Sizes Of 15, 20, 25, 30, 35, 40Mm Lengths. Preloaded With Polyester Braid Suture (#5 Leading Suture & #2 Flipping Suture) , Low- Profile Cancellous Screws Titanium 6.5 Mm Of Sizes 25, 30, 35, 40 Mm. , Spiked And Suture Washers Of 14 And 18 Mm. , Tibial Post Fixation Screw Titanium Made Of Dia 6.5 Mm And 30 Mm Length , Shaver Blades (Ss Alloy / Platinum Tip):-Single Cutting:Razor Sharp Toothed Inner Blade No Teeth On Outerwindow 4Mm, 4.5 Mm 5Mm 5.5Mmstraight And Angleddouble Cutting:The Narrow Gap Between Inner And Outer Cutting Surfaces 4Mm, 4.5 Mm 5Mm 5.5Mm Straight And Angled , Resector: 4Mm, 4.5 Mm 5Mm 5.5Mm Straight And Angled , Burr Barrel Burrs 4Mm, 4.5 Mm 5Mm 5.5Mm6 Flute And 12 Flute Round Burrs4mm, 4.5 Mm 5Mm 5.5Mm6 Flute And 12 Flute , Spiked Ligament Staple Titanium Made. , Cannulated Cross Pin Titanium Made. , Cannulated Interference Screws- Roundhead Titanium/Bio Absorbable. Standard 4.5Mm Hex For Easier Insertion And Removal In Diameters 8Mm, 9Mm, 10Mm And 11Mm In Lengths 20Mm, 25Mm, 30Mm And 35Mm. , Cannulated Interference Screws- Fully Threaded Titanium/Bio Absorbable In Diameters 8Mm, 9Mm, 10Mm And 11Mm , In Lengths 20Mm, 25Mm, 30Mm And 35Mm , Braided Composite Suture (I.E. Bio Fiber/Fiber Wire) Multi-Strand,Long Chain Ultra-High Molecular Weight Polyethylene (Uhmwpe) Core With A Braided Jacket Of Polyester And Uhmwpe. Tapered ,Cutting ,Reverse Cutting And Diamond End ,3/8 Circle And 1/2 Circle. White; White/Blue; White/Green Colours. Usp Size 2/ Ep Size 5. Length 38 Inches/90 Cms. , Braided Polyester Suture( I.E. Ethibond ), 2-0 And 5-0 With 4 Strands Braided, Sterile, Surgical Suture Composed Of Poly (Ethylene Terephthalate). Prepared From Fibers Of High Molecular Weight, Long-Chain, Linear Polyesters Having Recurrent Aromatic Rings As An Integral Component. Coated With Polybutilate Or Poly {Oxy-1, 4 Butanediyloxy (1, 6-Dioxo-1, 6 Hexanediyl) , 5Mm Synthetic, Braided, Non-Absorbable Suture (I.E. Mersilene Tape) , Titanium Interference Screws For Acl Repair. Sizes 8 Mm, 9 Mm, 10 Mm, 11 Mm, 12 Mm. , Titanium Endo-Button. , Titanium Endo-Disc. , A.O. Open / Closed Clamps, 2.5, 3.5, 4.5 Mm. , Cylindrical/ Universal Clamps, 2.5, 3.5, 4.5 Mm , Rod To Rod Clamp. , Transverse Clamp. , Cortical Schanz Pin 2.5,3.0,3.5,4,4.5 Mm. , Cancellous Schanz Pin 5,6 Mm. , Tubular Rod. , Connecting Rod Of 4, 5, 8, 10, 11 Mm Diameter. 4”, 6”, 8”, 10”, 12”, 14”, 16”, 18”. , A.O. Type External Fixator R/U. , Finger Distractor. , Radius Ulna Distractor. , Rail Road Fixator For Femur / Tibia. , Illizarov’S Ring Fixator. Half Ring Of 80, 100, 120, 140, 160, 180, 200, 220, 240 Mm. , Italian Femoral Arches 900, 1200. 80, 100, 120, 140, 160, 180, 200, 220, 240 Mm. , Multiple Fixation Clamps. , Schanz Pin Fixation Bolts. , Oblique Supports. , Threaded Rods 8 Mm Diameter. 75, 100, 125, 150, 175, 200, 250, 300, 350, 400, 450 Mm. , Telescopic Rods. 75, 100, 125, 150, 175, 200, 250, 300, 350, 400 Mm. , Male & Female Post, 2, 3, 4, 5 Hole Set , Male & Female Hinges, 1 Hole Set. , Connection Plates, 5, 6, 7, 8 Holes. , Twisted Plates, 5, 6, 7, 8 Holes. , Illizarov’S Wires Bayonet Type. 1.5, 1.8, 2.0 Mm. , Illizarov’S Wires Olive Type. 1.5, 1.8, 2.0 Mm. , Connecting Bolt. , Connecting Nut 10 Mm. , Wire Fixation Bolts Cannulated. , Wire Fixation Bolts Slotted. , Jess External Fixator Set. , Pelvic C Clamp. , Nails For Pelvic C Clamp. , Steinman Pin Of 3, 3.5, 4, 4.5, 5 Mm. , Denham Pin Of 3, 3.5, 4, 4.5, 5 Mm. , Kirschner Wire Double Ended Trocar Tip/ Threaded Tip. Diameter 1,1.2, 1.5,1.8 2, 2.5, 3 Mm. Length 6”, 9”, 12”. , S.S. Wire Reel Of16 To 28Gauze. , Knowel’S Pin. , A.M. Pin. , Gigli Saw Wire. , Titanium Pedicle Screw Connecting Rod Set (Mri- Compatible). , Titanium Cage (Mri- Compatible) 10Mm, 13Mm, 16 Mm, 19 Mm. , Titanium Staple (Mri- Compatible). , Titanium Transverse Connector (Mri- Compatible). , Titanium Mono-Axial Screws (Mri- Compatible) 5.3 Mm30 Mm, 35 Mm, 40 Mm, 45 Mm. , 6.0 Mm 30 Mm, 35 Mm, 40 Mm, 45 Mm. , Titanium Poly- Axial Screws (Mri- Compatible) , 5.3 Mm 30 Mm, 35 Mm, 40 Mm, 45 Mm. , 6.0 Mm 30 Mm, 35 Mm, 40 Mm, 45 Mm. , Hartsheel Implants For Spine (Mri- Compatible). , Cervical Plates (Mri- Compatible). , Harrington Rod System (Mri- Compatible). , Mono Axial Locking Screw 4.5 Mm, 5.5 Mm, 6.5 Mm Diameter 30-50 Mm With 5 Mm Of Increament. , Mono Axial Locking Screw 6.5 Mm Diameter (Iliac Screw) , 60 – 75 Mm With 5 Mm Of Increament , Cross Link (Inter Connector) 5 Mm , Cervical H-Plate Ordinary Hole 4 Hole, 20 – 35 Mm With 2.5 Mm Of Increament , Cervical H-Plate Ordinary Hole6 Hole, 35 – 55 Mm With 2.5 Mm Of Increament , Cervical H-Plate Ordinary Hole8 Hole, 47.5 – 65 Mm With 2.5 Mm Of Increament , Cervical Spine Locking Plate 5 Hole, 25, 29, 33 Mm , Cervical Spine Locking Plate 8 Hole, 37, 41, 45 Mm , Drummonds Wire Without Button , Drummonds Wire With Button , Sublaminar Wire 12” , Sublaminar Wire 18” , Disposable Pulse Lavage Tubings. , Modular Proximal Femur Replacement Prosthesis. , Modular Distal Femur Replacement Prosthesis. , Modular Proximal Tibia Replacement Prosthesis. , Modular Proximal Humerus Replacement Prosthesis. , Titanium 1.5 Mm 20 Hole Continous , Titanium 1.5 Mm 2 Hole With Gap , Titanium 1.5 Mm 3 Hole With Gap , Titanium 1.5 Mm 4 Hole With Gap , Titanium 1.5 Mm 6 Hole With Gap , Titanium 1.5 Mm 8 Hole Continuous , Titanium 1.5 Mm L Plate Left , Titanium 1.5 Mm L Plate Right , Titanium 1.5 Mm Orbital Plate 4 Hole With Gap , Titanium 1.5 Mm Orbital Plate 6 Hole With Gap , Titanium 1.5 Mm T Plate , Titanium 1.5 Mm Xplate , Titanium 1.5 Mm Yplate , Titanium 2 Mm 16 Hole Continuous , Titanium 2Mm 2 Holewith Gap , Titanium 2Mm 3 Holewith Gap , Titanium 2Mm 4 Holewith Gap , Titanium 2Mm 4 Holecontinuous , Titanium 2Mm 6 Holewith Gap , Titanium Leg Screw 2.5 Mm X10 Mm , Titanium Leg Screw 2.5 Mm X12 Mm , Titaniummesh 2”X2” , Titaniummesh 4”X4” , Titanium Mesh 6”X2” , Titanium Wire Mesh8”X2” , Titanium Rconstruction Plate With Condyle Left Long Ramus (24 Hole ) , Titanium Rconstruction Plate With Condyle Left Short Ramus (20 Hole ) , Titanium Rconstruction Plate With Condyle Rightlong Ramus (24 Hole ) , Titanium Rconstruction Plate With Condyle Right Short Ramus (20 Hole ) , Titanium Rconstruction Plate Withoutcondyle Left Long Ramus(24 Hole ) , Titanium Rconstruction Plate Withoutcondyleleft Short Ramus(20Hole , Titanium Rconstruction Plate Withoutcondyleright Long Ramus(24Hole , Titanium Rconstruction Plate Withoutcondyleright Short Ramus (20Hole , Titanium Screw 1.5 Mm X 10Mm , Titanium Screw 1.5 Mm X 12Mm , Titanium Screw 1.5 Mm X 4Mm , Titanium Screw 1.5 Mm X 6Mm , Titanium Screw 1.5 Mm X 8Mm , Titanium Screw2 Mm X 10Mm , Titanium Screw 2 Mm X 12Mm , Titanium Screw2 Mm X 14Mm , Titanium Screw 2 Mm X 4Mm , Titanium Screw 2Mm X 6Mm , Titanium Screw 2 Mm X 8Mm , Titanium Screw 2.5 Mm X 10Mm , Titanium Screw 2.5 Mm X 12Mm , Titanium Screw 2.5 Mm X 14Mm , Titanium Screw 2.5 Mm X 4Mm , Titanium Screw 2.5 Mm X 6Mm , Titanium Screw 2.5 Mm X 8Mm , Titanium 2 Mm Orbital Plate 6 Hole With Gap , Titanium 2Mm Tplate , Titanium 2Mm Xplate , Titanium 2Mm Y Plate , Titanium 2.5 Mm 16 Hole Continues , Titanium 2.5 Mm 2 Hole With Gap , Titanium 2.5 Mm 3 Hole With Gap , Titanium 2.5 Mm 4 Hole With Gap , Titanium 2.5 Mm 6 Hole With Gap , Titanium 2.5 Mm 8 Hole With Gap , Titanium 2.5 Mm L Plate Left , Titanium 2.5 Mm L Plate Right , Titanium 2.5 Mm Orbital Plate 4 Hole With Gap , Titanium 2.5 Mm Orbital Plate 6 Hole With Gap , Titanium Chin Plates 10 Mm , Titanium Chin Plates 8 Mm , Titanium Emergency Screw 1.7Mmx4 Mm , Titanium Emergency Screw 1.7Mmx6 Mm , Titanium Emergency Screw 1.7Mmx8 Mm , Titanium Emergency Screw 2.2 Mmx10 Mm , Titanium Emergency Screw 2.2 Mmx4 Mm , Titanium Emergency Screw 2.2 Mmx6 Mm , Titanium Emergency Screw 2.2 Mmx8 Mm , Titanium Emergency Screw 2.2 Mmx10 Mm , Titanium Emergency Screw 2.7 Mmx6 Mm , Titanium Emergency Screw 2.7 Mmx8 Mm , Titanium Intermaxillary Fixation Screws 2 Mm X 10 Mm , Titanium Intermaxillary Fixation Screws 2 Mm X 8 Mm , Ehrlisch Arch Bar , 26 Guaze Wire , 28 Guaze Wire , Intraoral Distractor Right With Key , Intraoral Distractor Left With Key , Tempromandibular Joint Replacement Device (Tjr) , Drill Bit 1.5 Mm ( 4Mm , 6Mm , 8Mm , 10Mm , 12Mm. , Drill Bit 2 Mm , Drill Bit 2.5 Mm , Bone Shalviground Burs (5 Mm Dia.) , Bone Slavig Eclipedburs (8 Mm Dia.) , Peekimplants For Facial Reconstraion , S.S 1.5 Mm 20 Hole Continous , S.S1.5 Mm 2 Hole With Gap , S.S 1.5 Mm 3 Hole With Gap , S.S 1.5 Mm 4 Hole With Gap , S.S 1.5 Mm 6 Hole With Gap , S.S 1.5 Mm 8 Hole Continuous , S.S 1.5 Mm L Plate Left , S.S 1.5 Mm L Plate Right , S.S 1.5 Mm Orbital Plate 4 Hole With Gap , S.S 1.5 Mm Orbital Plate 6 Hole With Gap , S.S 1.5 Mm T Plate , S.S 1.5 Mm Xplate , S.S 1.5 Mm Yplate , S.S 2 Mm 16 Hole Continuous , S.S 2Mm 2 Holewith Gap , S.S 2Mm 3 Holewith Gap , S.S 2Mm 4 Holewith Gap , S.S 2Mm 4 Holecontinuous , S.S 2Mm 6 Holewith Gap , S.S Leg Screw 2.5 Mm X10 Mm , S.S Leg Screw 2.5 Mm X12 Mm , S.S.Mesh 2”X2” , S.S Mesh 4”X4” , S.Smesh 6”X2” , S.S Mesh8”X2” , S.S Rconstruction Plate With Condyle Left Long Ramus (24 Hole ) , S.S Rconstruction Plate With Condyle Left Short Ramus (20 Hole ) , S.S Rconstruction Plate With Condyle Rightlong Ramus (24 Hole ) , S.S Rconstruction Plate With Condyle Right Short Ramus (20 Hole ) , S.S Rconstruction Plate Withoutcondyle Left Long Ramus(24 Hole ) , S.S Rconstruction Plate Withoutcondyleleft Short Ramus(20Hole , S.S Rconstruction Plate Withoutcondyleright Long Ramus(24Hole , S.S Rconstruction Plate Withoutcondyleright Short Ramus (20Hole , S.S Screw 1.5 Mm X 10Mm , S.S Screw 1.5 Mm X 12Mm , S.S Screw 1.5 Mm X 4Mm , S.S Screw 1.5 Mm X 6Mm , S.S Screw 1.5 Mm X 8Mm , S.S Screw2 Mm X 10Mm , S.S Screw 2 Mm X 12Mm , S.S Screw2 Mm X 14Mm , S.S Screw 2 Mm X 4Mm , S.S Screw 2Mm X 6Mm , S.S Screw 2 Mm X 8Mm , S.S Screw 2.5 Mm X 10Mm , S.S Screw 2.5 Mm X 12Mm , S.S Screw 2.5 Mm X 14Mm , S.S Screw 2.5 Mm X 4Mm , S.S Screw 2.5 Mm X 6Mm , S.S Screw 2.5 Mm X 8Mm , S.S 2 Mm Orbital Plate 6 Hole With Gap , S.S 2Mm Tplate , S.S 2Mm Xplate , S.S 2Mm Y Plate , S.S 2.5 Mm 16 Hole Continues , S.S 2.5 Mm 2 Hole With Gap , S.S 2.5 Mm 3 Hole With Gap , S.S 2.5 Mm 4 Hole With Gap , S.S 2.5 Mm 6 Hole With Gap , S.S 2.5 Mm 8 Hole With Gap , S.S 2.5 Mm L Plate Left , S.S 2.5 Mm L Plate Right , S.S 2.5 Mm Orbital Plate 4 Hole With Gap , S.S 2.5 Mm Orbital Plate 6 Hole With Gap , S.S Chin Plates 10 Mm , S.S Chin Plates 8 Mm , S.S Emergency Screw 1.7Mmx4 Mm , S.S Emergency Screw 1.7Mmx6 Mm , S.S Emergency Screw 1.7Mmx8 Mm , S.S Emergency Screw 2.2 Mmx10 Mm , S.S Emergency Screw 2.2 Mmx4 Mm , S.S Emergency Screw 2.2 Mmx6 Mm , S.S Emergency Screw 2.2 Mmx8 Mm , S.S Emergency Screw 2.2 Mmx10 Mm , S.S Emergency Screw 2.7 Mmx6 Mm , S.S Emergency Screw 2.7 Mmx8 Mm , S.S Intermaxillary Fixation Screws 2 Mm X 10 Mm , S.S Intermaxillary Fixation Screws 2 Mm X 8 Mm , Peekimplants For Facial Reconstraion , Occipital Plate 25Mm-55Mm , Laminar/Pedical Screws Of All Size , Compatable Road And Conectot , Fuser Cages All Sizes , Stand Alon/Mesh Cages Diameter 8 Mm Above , Expandable Cages Cervical Diameter 8 Mm And Above , Anterior Cervical Plates & Screw For All Level Including Anterior C1c2 , Peak Cahes With And Without Screw System For Fixation , Hydroxy Apetite Bone Graft 6 Mm, 7Mm , Plif And Tlif Cages All Size , Stand Alon/Mesh Cages For Lumber And Dorsal Spine Diameter 8 Mm Above And Above All Sizes , Expandable Cages For Lumber And Dorsal Spine , Reductive Screws For Lumbar And Dorsal Spine All Size , Transpedical Monoaxial Screws Dorso Lumbar Spine With Compatible Roads And Connectors All Sizes , Transpedical Polyaxial Screws Dorso Lumbar Spine With Compatible Roads And Connectors All Sizes
