Tender For Construction Of Toilet And Repairing Of Store Building At Baranagore Wl Station.; 1 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared. 2 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 3 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 4 Fixed to steel windows by welding 5 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) 6 125 mm 7 Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete (Copper oxidised as per IS 1378) 8 250 mm weighing not less than 280 grams 9 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 10 250x10 mm 11 150x10 mm 12 Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 13 125 mm 14 100 mm 15 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer-in-charge 16 Extruded section profile size 48x40 mm 17 Providing and fixing to existing door frames. 18 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). 19 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. 20 Using M.S. angels 40x40x6 mm for diagonal braces 21 Fixing standard steel glazed doors, windows and ventilators in walls, including fixing of float glass panes with glazing clips and special metalsash putty of approved make, or metal beading with screws, (only steel windows, glass panes cut to size and glazing clips or metal beading with screws, shall be supplied by department free of cost. 22 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 23 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete with : 24 4.0 mm thick glass panes. 25 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 26 40 mm thick with 20 mm nominal size stone aggregate 27 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1stquality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4(1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. 28 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 29 (i)Single socketed pipes. 100 mm dia pipe 30 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 31 Single tee with door : 110x110x110 mm 32 Single tee without door :110x110x110 mm 33 Bend 87.5° : 110 mm bend 34 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 35 110 mm 36 Grading roof for water proofing treatment with 37 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) 38 12 mm cement plaster of mix : 39 1:6 (1 cement: 6 fine sand) 40 15 mm cement plaster on the rough side of single or half brick wall of mix : 41 1:6 (1 cement: 6 fine sand) 42 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete : 43 New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre 44 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 45 Two or more coats on new work. 46 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 47 Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In- Charge. 48 Removing and refixing the rolling shutter of size upto 9.00 Sqm in required position including taking out pipe shaft with brackets, wire springs, side guides and arrangements for inside and outside locking complete and fixing in the required position all comlete. 49 Removing & refixing Aluminium door shutter with frame for smooth operation including taking out door with frame, dismembering aluminium door sections, taking out panelling, reassembling the door shutter with aluminium cleats with screws, rivets & refixing the available panelling in position with snap beading & fixing the shutter in position with necessary stainless steel hinges with rivets or pivots with necessary screws etc complete as directed by the Engineer In charge. (a) of area upto 2.00 Sqm 50 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 51 W.C. pan with ISI marked white solid plastic seat and lid 52 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 53 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 54 Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : 55 White solid plastic seat with lid 56 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. 57 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 58 Flexible pipe : 320 mm dia 59 Providing and fixing 100 mm sand cast Iron grating for gully trap. 60 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 61 Providing and fixing soil, waste and vent pipes : 62 100 mm dia. Sand cast iron S&S pipe as per IS: 1729. 63 Providing and fixing plain bend of required degree. 64 100 mm dia Sand cast iron S&S as per IS - 1729 65 Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 66 100x100x100 mm Sand cast iron S&S as per IS - 1729 67 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 68 100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989. 69 Providing and fixing Stainless Steel dispenser of 1000 ml capacity, size 200x120x65 mm with all necessary fittings and of approved brand and manufacture of of approved quality and colour as directed. 70 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 71 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. 72 Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. 73 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2 BSP thread and shapes, weighing not less than 60 gms. 74 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall 75 15 mm nominal outer dia. Pipes. 76 20 mm nominal outer dia. Pipes. 77 25 mm nominal outer dia .Pipes. 78 40 mm nominal outer dia. Pipes. 79 Providing and fixing brass bib cock of approved quality : 80 15 mm nominal bore 81 Providing and fixing brass stop cock of approved quality : 82 15 mm nominal bore 83 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 84 20 mm nominal bore 85 32 mm nominal bore. 86 Providing and fixing uplasticised PVC connection pipe with brass unions : 87 45 cm length 15 mm nominal bore 88 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 89 To examine the possibility of discharge of unused tube well since last 12 years. Core cutting of existing tube well to remove the hard sediments inside tube well pipes and strainer and cleaning and washing the bore by compressor by water for 8 hours to observe the possibility of discharge of the defunced tube well. 90 Uprooting and removing plants from the surface of wallsparapet etc and making good damages. (Repairing ofdamages to be paid separately). 91 (a) Small plant of girth of exposed stem upto 75 mm. liftupto 6 mtr. 92 (b) Medium size plant of girth of exposed stem above 75 mm.but not exceeding 150 mm. lift upto 6 mtr 93 (c) Large plant of girth of exposed stem above 150 mm. butnot exceeding 225 mm. lift upto 6 mtr. 94 Easing and oiling, cleaning rolling shutters 95 Renewing spring of rolling shutter as per existing size and shapeincluding fitting fixing complete 96 Labour for taking out rolling shutter (only shutter portion)dismantling by parts for repair or (replacement of damaged partsonly), rehanging and refitting the same in position after necessaryrepairs (excluding the cost of supply of new parts) 97 Renewing profile of rolling shutter including fitting fixing completeas per existing size and shape 98 Renewing seam pipe for rolling shutter as per existing size andshape fitting, fixing complete. 99 Dismantling wash basin with brackets with or without waste fittings. 100 Dismantling Indian W.C. including taking out base concrete as necessary. 101 Dismantling urinal. 102 Cleaning soak pit by removing the top slab and replacing inner filling withjhama bats and repairing the pit as necessary including fitting the slab. 103 Removing sludge from septic tank, soak well etc. by methor labour includingdisposal of the same outside the compound as directed. 104 Upto 20 users: 105 Cleaning silt of inspection pit 106 Removing chokage of H.C.I. or S.W. pipe with split bamboo:Underground
