Tender For Improvement Of Gt Jawahar Junction, 1 Dismentling of flexiable pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials. (DSR 2023, 15.59) 2 Dismantaling of existing structures like culverts briges retaining walls and other structure comprising of masonary, cement concrete, wood work, steel work, including T&P and scaffolding, wherever, necessary, sorting the dismantalled mateiral, disposal of unserviceable, material and stacking the serviceable material with all lifts and lead of 1000 meters. 3 Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work. 4 Extra for Cartage of Malwa and other material as per the direction of E/Iupto 5 km including loading and unloading but excluding stacking on pucca roads (DSR : 2023, 1.1.8) 5 Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. 6 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level1:2:4 (1 ement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)(DSR 2023 4.1.2) 7 Brick masonry work in cement mortar 1:6 in Foundation complete excluding Pointing and plastering as per drawing and technical specification. (DSR 2023, 6.1.1) 8 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curgve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment) (Precast C.C. Kerb stone shall be approved by Engineer-in-charge) (DSR 2023, 16.69) 9 (RCC M-25) Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M25 using batching plant transit mixer & Concrete pump. (For U-Drain) 10 Supplying, fitting and placing un-coated HYSD bar reinforcement in foundation complete as per drawing and technical specifications 11 Plastering with cement mortar (1:3) on brick work in sub-structure as per technical specification 12 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture (DSR -2023, 13.62.1) 13 Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8 mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. (DSR -2023, 16.90) 14 Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 15 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. 16 Providing and applying primer coat with SS2 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70kg/sqm using mechanical means. 17 Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 to 0.30kg per sqm on the prepared bituminous surface cleaned with mechanical broom. 18 Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per centby weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. 19 Providing and laying bituminous concrete withhigher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4per centof mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects 20 Providinding weep holes in brick masonary/ plain / reinforced concrete abutment wing wall/ return wall with 100 mm dia AC pipe extending through the full width of the structure with slope 1V:20H towards drawing face. Complete as per drawing and technical specification. 21 Precasting and placing in position 125 mm dia Bollards 600 mm high…. . cement concrete 1:3:6 (1 Cement : 3 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 6 graded stone aggregate 20 mm nominal size derived from Recycled Concrete Aggregate (RCA)) (DSR : 2023, 4.9A) 22 Construction of median and island above road level with approved material brought from borrow pits, spread and compacted as per clause 408. 23 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishingand making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/e. fixing the railing with necessary accesories & stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purposed only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) 24 Steel work welded in built up sections / framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc as required. ( in stringers, treads, landings etc of stair cases, including use of chequered plate wherever required, all complete.(DSR 2023,10.25.1) 25 Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc. 26 Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) (DSR (H) 2.4.2) 27 Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately)(DSR (H) 2.8) 28 Grassing with selection No. 1/ Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately)(DSR (H) 2.10.1) 29 Providing and displaying of Livistona palm having ht. 60 cm to 75 cm, well developed with 8 to 10 leaves, fresh & healthy foliage in 30 cm size of Earthen pot/Plastic pot. as per direction of the officer-in-charge.(DSR (H) 3.56) 30 Providing and stacking of Michelia champa (Golden Champa) of height 90- 105 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge(DSR (H) 7.55) 31 Providing and stacking Jasmine grandiflorum (chameli) of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge(DSR (H) 9.8) 32 Providing and stacking of Nerium oleander (kaner) of height 45-60 cm. with 3-4 branches in poly bags of size 20 cm as per direction of the officer-in-charge. (DSR (H) 8.49) 33 Providing Plant Antirrhinum Hybrid dwarf variety, specimen (8-10 plants) with fresh & healthy foliage in full bloom well developed in 35 cm Earthen Tray/Challi Pot(DSR (H) 4.3) 34 Providing Plant Asiatic lilly hybrid variety (3 in one) plants in each pot having in full bloom 3 to 5 flowers 30 to 45 cm ht. well developed in 25 cm Earthen Pot/Plastic Pot. (DSR (H) 4.26) 35 Providing Plant Cyclemen hybrid variety specimen 5-6 plants fresh & healthy in full bloom well developed in 35 cm Earthen Tray/ Nand(DSR (H) 4.23) 36 Providing Plant Primula Hybrid variety specimen 5-6 plants in each Pot with fresh & healthy foliage in full bloom different colour well developed in 35 cm Earthen Tray/ Nand(DSR (H) 4.56) 37 Providing and stacking of Bauhinia acuminata height 60-75 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge DSR (H) 8.1 38 Providing and stacking of Calliandra, emarginata of height 45-60 cm. in earthen pot of size 20 cm as per direction of the officer-in-chargeDSR (H) 8.5 39 Supply and fixing of Decorative type sculpture NAMAMI GANGE made up with material fibre reinforced plastic with all fixing as per direction of Engineer-in-charge (Defined by Mural) VIVID (Apprx. Size of mural is 1 m height x 6 m length) approved by Engineer in charge.
