Dr. R. Ahmed Dental College & Hospital - Providing Laboratory R.C.C Slab Along With Plumbing Works For Ug Clinical Lab In The Department Of Conservative Dentistry & Endodontics At 4Th Floor, During The Year 2024-25. - 1 Stripping Off Worn Out Plaster And , kolkata-West Bengal

Dr. R. Ahmed Dental College & Hospital - Providing laboratory R.C.C slab along with plumbing works for UG clinical lab in the Department of Conservative Dentistry & Endodontics at 4th floor, during the year 2024-25. - 1 Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.4th Floor (U.G. Clinic) : 2 Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing etc -- Upto area 2.5 Sq.m : 3 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. 4 Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. -- Pakur Variety : 5 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.Other than SAIL/ TATA/RINL4th Floor : 6 Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works.Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work-- 4th Floor : 7 Supplying,fitting & fixing granite slab 15mm to 18mm thick in floor, lobby, stair, landing and treads etc. over 20mm (avg) thick base of cement morter (1:2) laid with white cement slurry @ 4.40Kg per Square meter before placing of granite and jointed with white cement slurry @ 2.0 Kg per square meter with necessary pigments and complete as per direction of Engineer-in-charge including cost of all materials, labours, curing and roughening of concrete surface complete. -- Area of each Granite slab above 1.00 Square meter. : 8 Extra cost of labour for prefinished and premoulded Nosing to treads of steps, railing, window sill etc. of Marble Stone. 9 Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.WallWith Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.Area of each tile upto 0.09 Sq.mColoured decorative4th Floor : 10 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]With 1:6 cement mortar -- 20 mm thick plaster :4th Floor : 11 Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick) 12 Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC. (In Ground Floor)One Coat -- Water based interior grade Acrylic Primer : 13 Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) :(Two coats) -- Luxury Quality : 14 Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws:100 x 63 x 3.2mm. : 15 Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:150 mm grip x 10 mm dia rod. : 16 Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:150mm long x 10mm dia. bolt. : 17 Polishing only of old marble or terrazo work with oxalic acid powder using 33 gms/ sq.m. by manual labour / machine where necessary.2nd Floor : 18 Godrej Hydraulic door closer fitted and fixed complete.Medium type : 19 Supplying, fitting and fixing Black Stone slab used in Kitchen slab, alcove, wardrobe etc. laid and jointed with necessary adhesive Cement mortar (1:2) including grinding or polishing as per direction of Engineer-in -Charge in Ground Floor.Slab Thickness above 25 mm and upto 37.5 mm : 20 Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD etc ..For Exposed Work --PVC Pipes -- 20 mm : 21 32 mm : 22 50 mmdia : 23 Supplying, fitting and fixing bib cock or stop cock.Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). 24 Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets.630 mm X 550 mm X 180 mm : 25 Supplying, fitting and fixing pillar cock of approved make.CP Pillar Cock with 200 mm extended Lever Handle (Equivalent to Code No. 5031 & Model - FLORENTINE of JAQUAR or similar brand). 26 Supplying, fitting and fixing liquid soap container.Cromium plated : 27 Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge

Refer document

INR 3032.0 /-

INR 1.51 Lakhs /-