Tender For Khair Nagar Palika Parishad Reorganization Water Supply Scheme District Aligarh Supply Of All Materials, Labour, T And P Etc. For Construction Of Over Head Tank, Cwr, Pump House, Staff Quarter, Boundary Wall, Gate, Site Development, Supply Layi, khair-Uttar Pradesh

tender for Khair Nagar Palika Parishad Reorganization Water Supply Scheme District Aligarh Supply Of All Materials, Labour, T And P Etc. For Construction Of Over Head Tank, Cwr, Pump House, Staff Quarter, Boundary Wall, Gate, Site Development, Supply Laying, Jointing Of Rising Main, Distribution System Etc, 1 OVER HEAD TANK 2 Submission of design, drawing and supply of all material, labour T&P etc. to construction of as per tenderers own seismic proof design and drawings (approved by the department) complete intz type R.C.C. Over Head Tank with following capacity and staging on raft or pile or pile cum raft foundation with columns and braces of staging from made up ground level at site to the top of bottom ring beam of tank, with a minimum free board of 15cm. The design of the tank shall be based on safe bearing capacity of soil at site i.e. 8.0 T/m2 (datum) and depth of foundation as 2.50m (datum) from existing ground level on pile/raft foundation. Made up level of OHT will be taken as 0.60 m above existing gound level. Extra earth for filling of made up level will be arranged by the contractor at his own cost. The height of staging will be considered from the made up ground level to the ring beam (Top Face) of bottom dome. B.C. above given is tentative, contractor will have to test the B.C. and design of O.H.T. will be on actual B.C. found.All other details of tank not covered here shall also be as per specifications enclosed. The specifications for O.H.T. will be as follows :- 3 Submission of detailed design and drawing from any recognized University such as I.I.T. etc. or as per direction of Engineer in-charge.1. Minimum grade of concrete for whole structure-M30 2. Minimum grade of Steel for whole structure-Fe 550 TMT bars 4 R.C.C. O.H.T. as per approved design including fixing various pipes and ventilator at top and fixing of M.S. sheet of 8 mm gauge around manhole cover of 60cm x 60cm size with frame and locking arrangement and railing in three rows with 20mm OD medium quality GI pipe including supply of all material,labour,T&P etc.all complete. 5 Two column based R.C.C. vertical stair case with 1.0 m minimum clear width as an access to Balcony and Top Dome of tank from ground level as per design & drawing with 1.25 m high raillingin three rows with 20mm OD medium quality GI pipeand gate with cabin made up of 60mmx60mmx6mm angle iron and 25mmx25mm square iron jali as per specification including supply of all materials. 6 Supply and fixing of M.S. ladder60mmx60mmx6mm angle iron and 20mm dia bar from top of roof of top dome to inside the tank in a slope of 3:1 (3 vertical : 1 horizontal) with railing as specified and supply & fixing of SS bar cover for pipe opening inside the tank with all labour, T&P etc. complete. 7 Railing on staircase & its landings, all around balcony & top dome for access up to ventilator as specifications including supply of all material. Railing shall be provided in three rows of medium class G.I. pipe of 20mm dia and MS angle iron (60x60x6mm) should be provided in 1.25 m height with 1.2 m centre to centre on both sides of the stair case with embedded in concrete 1:1:2, MS gate should be provided as entrance of stair case with locking arrangement. 8 Supply and fixing of lightening conductor and earth plate etc. as per specifications. 9 Testing of tank for water tightness as per specifications enclosed including supply of water. If water for testing is made available by department, the cost of Rs. 100.00 per KL will be deducted from the contractors bill. 10 Supply of all materials and construction of 80mm thick R.C.C. floor 1:1 1/2:3, R.C.C. apron and 20 cm dia semi circular drain around apron in a slope towards wash out chamber on 75 mm thick base concrete in 1:2:4 (cement:coarse sand: 40 mm stone ballast) 11 Three coats of approved quality and shade ofApex Painting as per direction of Engineer incharge over exposed surface of tank work including supply of all material, labour, T&P complete as required. 12 Three coats of anti corrosive / aluminum / black Japan paint of approved quality on all ironwork including supply of all material, labour and T&P etc. 13 Suplly of all materials, labour, T&P and construction of brick masonry sluice valve chambers including fixing R.C.C. cover as per deptt. Type design for the all inlet, outlet and washout pipes. The R.C.C. cover shall be casted in M.S. Channel section with handles on both sides. (Sluice valve chamber for over flow & wash out may be combined) 14 The words U.P. Jal Nigam, year of construction of , capacity of O.H.T., Logo of AMRUT 2.0 and slogan approved by Engineer in charge shall be painted prominently in letter not less than 30 cm. in height.(1 Nos.) 15 Maintenance for 12 months inclucding supply of all materials etc. complete. 16 Other specifications which are required for construction of O.H.T., given by UP Jal Nigam Engineer In-charge time to time will be followed by contractor. 17 Zone 4950 KL/20.0 M Staging Supply, carting and fixing of following sizes D.I. D/F pipes (K-9) with required specials such as reducers, duck foot bend, bell mouth etc. from water container body as per norms upto the sluice valve chamber inthe tank including supply of M.S. clamps, rubberinsertion sheet, nut bolts, washer etc. complete as per specifications, (details given below). It also includes the provision of making byepass arrangement from CWR to all outlets of OHT including supply & fixing of all required materials & specials etc complete.Inlet Pipe350 mm diaOutlet Pipe 450 mm dia Overflow Pipe 400 mm diaWashout Pipe 100 mm diaSupply and fixing of following sizes D.I. D/F sluice valves as per relevent latest I.S. specifications including supply of all jointing and other materials such as rubber insertion sheet, nut bolts, washer etc. complete as per specifications.(details given below)Outlet Pipe 450 mm dia Washout Pipe 100 mm dia 18 Zone 5600 KL/20.0 M StagingSupply, carting and fixing of following sizes D.I. D/F pipes (K-9) with required specials such as reducers, duck foot bend, bell mouth etc. from water container body as per norms upto the sluice valve chamber inthe tank including supply of M.S. clamps, rubberinsertion sheet, nut bolts, washer etc. complete as per specifications, (details given below). It also includes the provision of making byepass arrangement from CWR to all outlets of OHT including supply & fixing of all required materials & specials etc complete.Inlet Pipe 150 mm diaOutlet Pipe 350 mm dia Overflow Pipe 300 mm diaWashout Pipe 100 mm diaSupply and fixing of following sizes D.I. D/F sluice valves as per relevent latest I.S. specifications including supply of all jointing and other materials such as rubber insertion sheet, nut bolts, washer etc. complete as per specifications.(details given below)Outlet Pipe 350 mm dia Washout Pipe 100 mm dia 19 Zone 61000 KL / 25 m Staging Supply, carting and fixing of following sizes D.I. D/F pipes (K-9) with required specials such as reducers, duck foot bend, bell mouth etc. from water container body as per norms upto the sluice valve chamber inthe tank including supply of M.S. clamps, rubberinsertion sheet, nut bolts, washer etc. complete as per specifications, (details given below). It also includes the provision of making byepass arrangement from CWR to all outlets of OHT including supply & fixing of all required materials & specials etc complete.Inlet Pipe 250 mm diaOutlet Pipe 450 mm dia Overflow Pipe400 mm diaWashout Pipe 100 mm diaSupply and fixing of following sizes D.I. D/F sluice valves as per relevent latest I.S. specifications including supply of all jointing and other materials such as rubber insertion sheet, nut bolts, washer etc. complete as per specifications.(details given below)Outlet Pipe 450 mm dia Washout Pipe 100 mm dia 20 For every one meter increase or decrease of height of staging of O.H.T. 21 (i)for increase 22 (ii) for decrease 23 For every 0.5 meter increase or decrease in depth of foundation of O.H.T. from natural G.L. (specific/datum depth is 2.5 m from G.L.) 24 (i)for increase 25 (ii) for decrease 26 Renovation of over head tank 27 Providing and erection of scaffolding and shuttering material like challi, gurra, nail, bans, ballia, patra etc. required for complete of work on all surface area of OHT from top dome to G.L. so as to give strong and safe plateform to workers to work on all part of OHTfor repair and strengthning as per direction of engineer in-charge. 28 Zone 1 , 500KL/ 18.0 M Staging 29 Zone 2 , 800KL /20.00 M Staging 30 Zone 3 ,250KL /16.0 M Staging 31 Cleaning of exposed concrete surface of loose and foreign materials by means of sand blasting with coarse sand and including cleaning with all blast upto a height of 18 M above plinth level. 32 Provide semi circular drain of 200 mm dia all around the O.H.T. flooring consisting of cement concrete with 20mm gauge approved stone grit, coarse sand, cement in proportion of 1:2:4 including supply of all material, labour, T&P etc. required for proper completion of the work as per direction and satisfaction of Engineer Incharge 33 Supply and fixing ventilator jali at O.H.T. including repairing of the ventilator and fixing the same properly including supply of all material, labour, T&P etc. required for proper completion of the work. 34 Supply and fixing of fabricated M.S. angle iron ladder consisting of 50x50x6mm angle iron and 20mm dia plain M.S. bar of 45 cm wide for a required length and painted with anti corrosive paint and fixing the same in the tank body including supply of all materials, labour, T&P etc. required for proper completion of the work as per direction of Engineer Incharge. 35 Supply and fixing of 20mm dia medium quality of G.I. pipe railing with M.S. angle iron post of section 50x50x6mm and 1.00 M height including grouting the angle iron post properly and fixing the pipe railing including supply of all material, labour, T&P etc. required for proper completion of the work as per direction of Engineer Incharge. 36 New Pipe Railing ¾ (20mm) dia medium quality. 37 Repair of Old Railing. 38 M.S. angle iron for single row post 50x50x6x1.25m height 39 Supply and fixing of following devices of the O.H.T. including cutting of hole for cleats to fix the same properly and including supply of all material, labour, T&P etc. and fixing the appliances in the cleats with screw or nails etc. 40 Water level indicator complete with marked scale. 41 Lightening Conductor. 42 Injection grouting in vertical surface/wall placing and fixing nozzle by drilling machine in tank wall having minimum dia of nozzle 15mm and provide on a regular interval not exceeding 1m including construction joints. Injection of pidicrete AM (Ploymer based on shrinkage high strength grout) admixed with cement through nozzle under pressure by sump @ 250gms per bag of cement sealing the nozzle after grouting with Ploymer product mixed with cement, making tank body in working and seapage free condition. 43 Painting the iron work in small area with one coat of anti corrosive primer coat and two coat of approved enamel paint including supply of all material, labour, T&P etc. required for proper completion of the work as per satisfaction of Engineer Incharge. 44 Railing of stair case and balcony with iron post and two rows of G.I. pipe 20mm dia. 45 Painting with approved quality Black Japan paint, inlet, outlet, washout pipe, over flow, pipe 100mm dia to 350mm dia. 46 Painting of outer surface of OHT with weather proof paint (like apex etc.) as per direction of engineer in-charge. 47 Construction of masonry type chamber for Sluice Valve with R.C.C. Cover. 48 CWR with ZONAL PUMPING STATION (ZPS) 49 Supply of all materials, labour and T&P etc. complete for the construction of Ground RCC CWR of following capacity & with 1.00m wide P.C.C. appron alround with 20 cm semi circular C.C.(1:2:4) drain M.S. ladder with hand rails out side and inside the tank body proper ventilators at top, water level sensor, Lightening conductor as per latest I.S.I. or electricity rules, 1150mm dia medium pattern M.S. Manhole cover hinged with locking arrangement fixing and jointing vertical DI D/F, pipes, specials and duck foot bends of required size for inlet. 50 Supply and fixing of outlet sluice valve and wash out sluice valves with all jointing materials for proper completion and other appurtenant works including excavation in all type of soil & in rock etc. painting on exposed weather coat paint, painting of pipes and ladder with approved anticorrosive paints also including testing of the CWR including carriage of construction of materials by truck/ head load etc. upto site of work on 8 t/sqm tentative bearing capacity of soil (testing of BC of soil included) including fixing of overflow pipe. 51 Supply and laying of pipe upto a suitable place and including construction of drainage system for emptying of CWR for cleaning & repairs and maintenance.construction of R.C.C. framed Pump house with Supply of all materials labour T&P etc. over CWR as per approved design, drawing and standard specifications with 1 m wide PCC appron around along with 15 cm semicircular CC (1:2:4) drains, RCC wall upto plinth level, to roof of pump house. 52 RCC floor, foundation and roof, 2m wide RCC plateform at plinth level, stair case from plateform to floor of pump house, railing on the stair case and CWR Walls and plateform foundation block of pumping plant RCC columns with bracket and longitudinal RCC beams to support moving gantry crane, plastering in the inner and outer brick masonry wall, flooring supply and fixing of doors, windows ventilators, painting on explosed surface with three coats of approved weather coat paint, acrylic emulsion in the inner surface, painting of door, windows ventilators, etc. supply and fixing of DI down pipes from roof to GL and other appurtenant works required to complete the pump house in all respect. 53 Zone 4, 350 KL 54 Zone 6 ,350 KL 55 RISINGMAIN & DISTRIBUTION SYSTEM 56 RISINGMAIN & DISTRIBUTION SYSTEM 57 Dismantling/Cutting of following types of road surface including sorting out of serviceable material and its stacking at a suitable place. 58 B.O.E. Road 59 Bituminous Road 60 C.C./R.C.C. Road 61 Interlocking Tiles Road 62 Excavation of earth for pipeline in all types of soil, including lift upto 1.50 m and lead upto 50 m from center of trench, giving one meter cover from top of pipe, refilling of earth after laying pipe line in 20 cm layer with watering, ramming including all labour, T&P etc. complete. 63 Supply of following sizes ofpipes for risingmain & distribution system conforming to latest/ relevant I.S. 4984/2016 & I.S. 8329/2000 Specifications with all jointing materials conforming to latest /relevant I.S. specifications including F.O.R. destinationand all taxes and insurance etc. with loading, unloading and carting up to site of work. 64 90 mm dia 65 110 mm dia 66 140 mm dia 67 160 mm dia 68 D.I. Pipe (Class K-7) 69 125 mm dia 70 200 mm dia 71 250 mm dia 72 300 mm dia 73 350 mm dia 74 400 mm dia 75 450 mm dia 76 D.I. Pipe (Class K-9) 77 125 mm dia 78 200 mm dia 79 300 mm dia 80 Supply of the following sizes ofD.I.D/F Sluice Valves conforming to latest/ relevant I.S.Specifications destination including F.O.R. destinationand all taxes and insurance etc. with loading, unloading and carting up to site of work. 81 450 mm dia 82 400 mm dia 83 350 mm dia 84 300 mm dia 85 250 mm dia 86 200 mm dia 87 150 mm dia 88 125 mm dia 89 100 mm dia 90 80 mm dia 91 Supply of the following sizes of D.I. Double flanged scour valves as per releventI.S. Standardworking pressure 10 kg/Sqcm F.O.R up to Destination including all taxes and insurance. 92 80 mm dia 93 Supply of 25mm dia screwed down type air valve with gun metal sheet at site store including all taxes. 94 Supply of undergroundsluice valves type fire hydrant consisting of 80 mm dia tail pieces, 80 mm dia duck foot bend and 63 mm dia standard make iron coupling with cap and chain etc. complete to ISS 909 at site including all taxes. 95 Laying & Jointing of the following types and sizes of pipes including supply of all electrofusion fittings, D.I. Specials & jointing materials as per site requirement . All jointing work in HDPE Pipe must be carried out using electrofusion process ( Including availability of electrofusion jointing apparatus & supply of electricity using generator etc ) conforming toIS 4984/2016, IS 8329/2000or their amendment including railway freight, insurance charges F.O.R. up todestination. 96 H.D.P.E. PIPE (6kg/cm2) PE-100 97 90 mm dia 98 110 mm dia 99 140 mm dia 100 160 mm dia 101 D.I. Pipe (Class K-7) 102 125 mm dia 103 200 mm dia 104 250 mm dia 105 300 mm dia 106 350 mm dia 107 400 mm dia 108 450 mm dia 109 D.I. Pipe (Class K-9) 110 125 mm dia 111 200 mm dia 112 300 mm dia 113 Carting of D.I. D/F Sluice valves of Following sizes to the site of worksLowering them into already Prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete with Excluding valves and specials Required but including the testing etc. complete. 114 450 mm dia 115 400 mm dia 116 350 mm dia 117 300 mm dia 118 250 mm dia 119 200 mm dia 120 150 mm dia 121 125 mm dia 122 100 mm dia 123 80 mm dia 124 Carting of D.I. D/FScour valves to the site of workslowering them into already Prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete with Excluding valves and specials Required but including the testing etc. complete Excluding valves and specials required but including the testing etc. complete. 125 80 mm dia 126 Carting of 25 mm dia screwed down air valves of following sizes to the site of workslowering them into already prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete with Excluding valves and specials Required but including the testing etc. complete. 127 Carting of 80 mm dia flanges fire hydrant of the site of workslowering them into already prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete with Excluding valves and specials Required but including the testing etc. complete. 128 Supply of all materials, labour T&P etc. required for construction ofof sluice valve / scour valve chamber with proper working space, including excavation of earthwork, Ist class brickwork, plaster (1:4 cement, coarse sand mortar), heavy duty M25 grade RCC Cover ( 200 mm thick with double reinforcement), as per instructions of engineer-incharge. 129 Surface box type 130 Masonry type 131 Supply of all materials, labour T&P etc. required and construction of 350 x 350 x 500 mm size air valve chamber as per type design including supply and fixing the 500 mm dia MS manhole cover. 132 Supply of all materials, labour T&P etc. required and construction of 750 x 750 x 1000 mm size fire hydrant chamber as per type design including supply and fixing the 500 mm dia MS manhole cover. 133 Supply of all materials, labour T&P etc. required and construction of single tap pillar type stand post including plateform as per type design. 134 Provision for Large crossing (greater than 2.0 m width) of nala & culverts including shiftijng of telephone cabel etc.along the alignment of pipe line including supply, laying & jointing of D.I. casing pipe and special and also jointing material, their laying and jointing testing etc. complete 135 Construction of house connections 136 Making of ferrule connection in 50 to 500 mm nominal dia. distribution mains with electrofusion saddle piece having electro fused adapter, service connections, fittings and fixing of ferrule of 15mm size including tapping of the main and cost of bailling out of water. The above work includes supply, carting, laying & jointing/fitting of 20 mm G.I. Pipe , 20 mm H.D.P.E. Pipe (as per site required length) ,G.I. elbows for jointing of G.I. pipe, 1 No. HDPE saddle (for HDPE dia of existing pipe upto 200 mm) /MS clamp (for dia of existing pipe DI/CI above 200 mm), 1 No. 15 mm brass ferrule /F.C.V.SS - 316 conforming to relevant IS Specifications and 1 No. HDPE adopter, 1 Nos. FTPP Compressor Elbow, 1 No. PTMT Bib Cock along with all labour, T&P etc. required for proper completion of workIncludingexcavation (Excluding dismantling / reinstatement of roads) and also submission of single set of GPS locationwise house connections photographs in soft & hard copy. 137 For New Pipe Line 138 Up to 110mm dia 139 For 125mm to 160mm dia 140 For 200mm to 250mm dia 141 For 300mm dia 142 For 350mm to 500mm dia 143 For Existing Pipe Line 144 Up to 110mm dia 145 For 125mm to 160mm dia 146 For 200mm to 250mm dia 147 For 300 mm dia 148 For 350mm to 500mm dia 149 R.C.C. work with cement, approved coarse sand and 20 mm gauge stone grit in proportion of 1:2:4 in construction of thrust blocks excluding supply of reinforcement and its bending but including 0.50 mm gauge wire and fixing in position also centering, shuttering, all materials, labour, T&P etc. required for proper completion of work. 150 Reinforcement work with Fe 550 TMT bars in R.C.C. work wrought to required shape as necessary including its bending and wastage including supply of all materials, labour, T&P etc. required for proper completion of work. 151 Permanent reinstatement of roads including all material, labour, T&P etc. complete work. 152 B.O.E. roads by 40% new bricks including its base preparation with 100 mm thick GSB 153 Bitumen Road complete as per PWD specification for ODR and direction of Engineer In-charge. 154 C.C. Road with 150 mm thick CC work (1:2:4) cement, coarse sand & 20mm stone grit over 100 mm thick PCC base (1:4:8) cement, coarse sand & 40mm stone ballast after washing the trench and application of neat cement coat over the edges where ever necessary as per site requirement upto satisfaction of Engineer-In-Charge 155 Interlocking tiles roads by 40% new Interlocking tiles over 25 mm thick sand bedding including its base preparation with 100 mm thick PCC base (1:4:8) cement, coarse sand & 40mm stone ballast after washing the trench and application of neat cement coat over the edges and locks filled by fine sand and edge gapping filled by CC work (1:2:4) cement, coarse sand & 10mm stone grit where ever necessary as per site requirement upto satisfaction of Engineer-In-Charge. 156 BUILDING WORKS 157 Excavation in foundation & plinth in ordinary soil (sand, loam or clay) or kankar mixed soil with lift up to 1.50M and lead up to 50M including refilling watering ramming of excavated earth into the trenches, or into the space between the building and sides of foundation trenches or into the plinth and disposal of surplus earth upto a distance of 50m from the center of foundation trenches. 158 Laying Plain Cement concrete with 40mm gauge stone ballast, coarse sand and cement in ratio of 12:6:1 in foundation including supply of all materials, labour, T&P etc. required for proper completion of work. 159 1st classbrick work in cement & coarse sand sand mortar in ratio 1:6 in foundation and plinth including supply of all materials, labour, T&P etc. required for proper completion of work. 160 1st classbrick work in cement & coarse sand mortar in ratio 1:4 in foundation and plinth including supply of all materials, labour, T&P etc. required for proper completion of work. 161 20 mm thick damp proof course with cement,approved coarse sand & Stone grit in 1:2:4 cement and coarse sand mortar including 5% water proofing material or as specified. 162 Sand filling in plinth including supply of necessary quantity of sand from the site of work including loading, unloading and cartage of earth, filling watering, ramming, dressing & leveling, labour, T&P etc. complete as per direction ofEngineer Incharge. 163 1st Class brick work in 1:6 with cement & coarse sand sand mortar in super structure in one brick thick wall including supply of all materials, labour, T&P etc. required for proper completion of the work. 164 1st Class brick work in 1:4 with cement & coarse sand mortar in super structure in one brick thick wall including supply of all materials, labour, T&P etc. required for proper completion of the work. 165 Supply and fixing of all materials, labour, T&P etc. required for making door shutters by M.S. sheet 18 gauge, M.S. angle 50x50x6mm size also including angle iron chaukhat with hold fast as instructed by Engineer Incharge including cement, concrete for fixing the same in the walls complete. 166 R.C.C. work with cement, approved coarse sand and 20mm gauge stone grit in proportion of 1:1.5:3 in the following works excluding supply of reinforcement and its bending but including 0.50mm gauge wire and fixing in position also centering, shuttering, all materials, labour, T&P etc. required for proper completion of work. 167 Beams 168 Sunshade & Slabs 169 Columns 170 Reinforcement work with Fe 550 TMT bars in R.C.C. work wrought to required shape as necessary including its bending and wastage including supply of all materials, labour, T&P etc. required for proper completion of work. 171 12mm thick plaster in cement & coarse sand mortar in ratio of 1:6 over brick work minimum thickness not to be less than 10mm including supply of all materials, labour, T&P etc. required for proper completion of work. 172 On smooth surface 173 On Rough Surface 174 12 mm thick plaster in Cement & Coarse sand mortar in ratio of 1:4 over brick work minimum thickness not to be less than 10mm including supply of all materials, labour, T&P etc. required for proper completion of work. 175 12 mm thick cement plaster to ceiling of mix 1:4 cement, coarse sand mortar including supply of all materials, labour, T&P etc. required for completion of work. 176 25 mm thick 1:2:4 plain cement concrete floor with cement, coarse sand and 20mm gauge approved stone grit, laid in panels, finished with 3mm thick floating coat of neat cement over 7.5cm thick base concrete consisting of cement and fine sand and first class brick ballast 40mm gauge in proportion of 1:6:12 and removing any over lapping mortar in the joints of the panels if any and giving an uniform finish including supply of all materials, labour, T&P etc. required for proper completion of the work. 177 Same as above Item but 40 mm thick flooring without base concrete. 178 construction of semi circular C.C. drain 200mm dia as per departmental drawing over 100 mm thick base concrete in 1:4:8 (Cement: Coarse Sand: 40 mm nominal size Coarse Aggregate) with finishing of 3 mm thick floating coat of neat cement including supply of all material, labour, T&P etc. 179 Supply of all materials, labour, T&P etc. and construction of 80 mm thick Interlockig tiles approach road over 25 mm thick sand bedding including its base preparation with 100 mm thick PCC base (1:4:8) cement, coarse sand & 40mm stone ballast and locks filled by fine sand and edge gapping filled by CC work (1:2:4) cement, coarse sand & 10mm stone grit where ever necessary as per site requirement upto satisfaction of Engineer-In-Charge. 180 Supply and laying complete 4 cm thick insulation layer of sand and clay over reinforecement concrete roof and 40 mm thick 1:2:4 plain cement concrete floor with cement, coarse sand and 20 mm gauge approved stone grit, laid in panels, finished with 3mm thick floating coat of neat cement over insulation layer including supply of all materials, labour, T&P etc. 181 Supply & fixing of rolled steel joist 225mm x 110mm and 10mm thick size including its black painting with approved paint and also one coat of primer with all materials, labour, T&P etc. required for proper completion of work. 182 Construction of 3.6m wide MS Gate with pillars as per departmental type design & drawing including 1.20M wide wicket gate. 183 Provide all materials , Labour ,T&P etc Required for proper completion of work and construct pillars as per type design and fixing of gate 1.20 M wide wicket gate 184 Supply and fixing of rain water P.V.C. Pipe 110 mm 6 Kg/cm2 with bend and clamp etc. complete. 185 Apex paint (approved quality) in two coats of approved shade over one primary coat including supply of all materials, labour, T&P etc. required for proper completion of the work. 186 Painting or varnishing of new iron work with one coat of primer and two coat of approved paint and varnish including supply of all materials, labour, T&P etc. complete in all respect in all floors. 187 Providing and fixing in position rolling shutter of approved make of 80x125 mm gauge called rolled M.S. interlocked througout their entire length & jointed together at the end by end locks and mounted on specially designed pipe shaft with branches and arrangement for inside and outside locking with push & pull operation complete. 188 Earth filling including supply of necessary quantity of soil from the site of work including loading, unloading and cartage of earth, filling watering, ramming, dressing & leveling, labour, T&P etc. complete as per direction ofEngineer Incharge. 189 Electrification Works in Staff Quarter including supply of all material, labour, T&P etc complete. 190 Water Supply and Sanitation Works with construction of Septic Tank and Soak Pit as per type design in Staff Quarter including supply of all material, labour, T&P etc complete. 191 Supply and fixing of exhaust fan including supply of material labour T&P etc. complete. 192 Provision for inside Square Drain including supply of all materials , labour and T & P etc Complete. 193 E&M Works 194 ZONE-1 195 Tube Well 196 Drilling of borehole for Tubewell contruction by RC Rig Machine including transportation, erection, dismantling of Rig and assoiated T & P complete in all respect including required all material, labour etc. 197 Transportation, Erection and Dismantling of Rig Machine 198 Drilling of 500mm size bore from 199 (i) 0M BGL to 100MBGL 200 (ii) 100M BGL to 130MBGL 201 Zone testing in water quality problem areas including all required material, labour, T&P etc. complete in all respect. 202 Tubewell AssemblyM.S. tubewell assembly with all required parts like plain pipe, slotted pipe (as required upto 50% of plain pipes) rings, well cap, bail plug, clamp, reducer, central guide, support structer etc. as required & as per typed design complete in all respect. 203 200 mm. Dia MS ERW Housing/ casing/ Slotted pipe having wall thickness of 7.1mm. 204 Supply of pea gravel 205 Logging of bore hole by departmental / approved electric logger. 206 Lowering of Tube well assembly duly welded including welding electrode and shurounding of pea gravel complete in all respect. 207 Lowering of 200mm dia pipe from 0 to 100m deep BGL. 208 Lowering of 200mm dia pipe from 100 to 120m deep BGL. 209 Development of Tubewell by compressor 210 Transportation, Installation and Dismantling of Air Compressor 211 Development of Tubewell by 250 PSI or requisite Capacity of Air compressor 212 Development of Tubewell by O.P. Unit 213 Transportation, Installation and Dismantling of O.P. Unit & Yield Test. 214 Development of Tubewell by 3 Cusec or requisite Capacity of O.P. Unit 215 Chemical and Bacterological test of water sample from depaprtmental/ approved lab. 216 SITC of Submersible pumpset (600 LPM discharge 88 mtr. head coupled with suitable H.P.of Motor A.C. Three phase) with 24 m. column pipes, NRV,CI D/F Bend 90*, CI A/F Tee, D/F pipe ( 1.5 m. long 02 nos., 1.0m. Long), Earthing,Painting ,Toolset, Servo Stablizer,Wiring of pumphouse internal & external, Chainpulley Block and all Pumping Plant accessories with nut bolts and Rubber packing etc.complete in all respect with all required material, T&P labour etc. 217 Motor operated Actuators with Sluice valve of size 100 mm. or suitable size at Main line and Bye-pass line as well. 218 CE & UL certified Electromagnatic Flowmeter suitable for above line size 100 mm. or suitable size. 219 Soft starter with RS-485 port-400V Class suitable for above motor rating 220 3 Mtr. long heavy duty size 100mm diacolumn pipe same as above spare.( 01 No. set has 02 nos. column pipes) 221 Supply & Laying of Additonal XLPE insulated Copper conductor cable size 2x3cx16 sq mm. or suitable rating required for submersible pump set. 222 Supply & Laying of PVC insulated Al. armoured cable size 1x3.5Cx25 sq mm. or suitable rating required from transformer LV side to meter panel and meter panel to starter. 223 SITC of Automatic type chlorinating plant solenoid driven dosing pump of capacity 0-6 LPH ( pressure 4kg/cm2 with ORP sensor to check and regulate the dosing along with 200 ltr capacity HDPE tank (02 nos., 1W+1S) ,standard fittings, wall/floor mountings MS bracket for dosing pump with GM Valve ,cock valve & sodium hydro chloride solution.,chlorine test kit with O.T. Solution complete with all respect.( suitable for 100-220V and 30-60 Hz , suction lift- 1.5 m., injection pressure 4 bars, steadt state accuracy +-3% repeatability +-3%) with RS 485 Port O/P having facility of interface with PLC SCADA system. 224 AUTOMATION OF TUBEWELL 225 CE & UL Certified PLC/ RTU in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & features as specified, for each tubewell/ OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations. 226 G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations all accessories included with signal enhancer anteena made for pumping plant internet charges. 227 CE & UL certified Inteligent Smart Energy Meter 228 Auto Phase reversal unit with inbuilt time delay and enclosure (100 Amp.) 229 CE & UL certified Hydrostatic type sub soil water level transmitter for tubewell. 230 CE & UL certified pressure transmitter 231 CE & UL certified Surge protector for above control panel 232 CE & UL certified 7 HMI touch screen suitable to communication with PLC/RTU local display and control of process parameter. 233 Complete cabling of tubewell including all power and control cables of all equipment at pump house and OHT . 234 Control panel with IP-54 protection industrial grade for all equipment separate for control (24V and power equipments) 235 Installation, commissioning & testing for one tubewell 236 Trial run for three month period for three nos for one tubewell 237 Re-development of Borewell upto Bail plug due to borewell filled with waste of material, loose strata etc. over the period of time as per current status with provision of following works as - 238 Transportation, Erection & Dismantling of Air-compressor 239 Charges for development By Air compressor for hours. 240 Transportation, Erection & Dismantling of O.P. unit 241 Charges for development By O.P. unit for hours. 242 Supply & Packing of Pea-gravel to sinking depth during Development. 243 SITC of Submersible pumpset (600 LPM discharge 88 mtr. head coupled with suitable H.P. rating of Motor A.C. Three phase) with 24 m. column pipes, NRV,CI D/F Bend 90*, CI A/F Tee, D/F pipe ( 1.5 m. long 02 nos., 1.0m. Long), Earthing,Painting ,Toolset, Servo Stablizer,Wiring of pumphouse internal & external, Chainpulley Block and all Pumping Plant accessories with nut bolts and Rubber packing etc.complete in all respect with all required material, T&P labour etc. 244 Motor operated Actuators with Sluice valve of size 100 mm. or suitable size at Main line and Bye-pass line as well. 245 CE & UL certified Electromagnatic Flowmeter suitable for above line size 100 mm. or suitable size. 246 Soft starter with RS-485 port-400V Class suitable for above motor rating 247 3 Mtr. long heavy duty size 100mm diacolumn pipe same as above spare.( 01 No. set has 02 nos. column pipes) 248 Supply & Laying of Additonal XLPE insulated Copper conductor cable size 2x3cx16 sq mm. or suitable rating required for submersible pump set. 249 Supply & Laying of PVC insulated Al. armoured cable size 1x3.5Cx25 sq mm. or suitable rating required from transformer LV side to meter panel and meter panel to starter. 250 SITC of Automatic type chlorinating plant solenoid driven dosing pump of capacity 0-6 LPH ( pressure 4kg/cm2 with ORP sensor to check and regulate the dosing along with 200 ltr capacity HDPE tank (02 nos., 1W+1S) ,standard fittings, wall/floor mountings MS bracket for dosing pump with GM Valve ,cock valve & sodium hydro chloride solution.,chlorine test kit with O.T. Solution complete with all respect.( suitable for 100-220V and 30-60 Hz , suction lift- 1.5 m., injection pressure 4 bars, steadt state accuracy +-3% repeatability +-3%) with RS 485 Port O/P having facility of interface with PLC SCADA system. 251 Dismantling of old puming plant with rusted 6 dia column pipes,panel,stabilizer ,their accessories etc with transportation of material in nagar palika store . 252 AUTOMATION OF TUBE WELL 253 CE & UL Certified PLC/ RTU in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & features as specified, for each tubewell/ OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations. 254 G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations all accessories included with signal enhancer anteena made for pumping plant internet charges. 255 CE & UL certified Inteligent Smart Energy Meter 256 Auto Phase reversal unit with inbuilt time delay and enclosure (100 Amp.) 257 CE & UL certified Hydrostatic type sub soil water level transmitter for tubewell. 258 CE & UL certified pressure transmitter 259 CE & UL certified Surge protector for above control panel 260 CE & UL certified 7 HMI touch screen suitable to communication with PLC/RTU local display and control of process parameter. 261 Complete cabling of tubewell including all power and control cables of all equipment at pump house and OHT . 262 Control panel with IP-54 protection industrial grade for all equipment separate for control (24V and power equipments) 263 Installation, commissioning & testing for one tubewell 264 Trial run for three month period for three nos for one tubewell 265 AUTOMATION OF EXISTING OVERHEAD TANK 266 Motor operated Actuators with Sluice valve of size 350 mm. at distribution line. 267 CE & UL certified Electomagnetic Flowmeter for OHT line size 350 mm. dia. 268 CE & UL certified Radar type level transmitter for OHT 269 Chlorine Analyzer with MODBUS RTU having following specifications- (a) FRC Sensor (Senssit make), range- 0-5 PPM (electrolyte with membrane cap), tytpe-Amperometric. (b) Analyzer with RS 485O/P. suitable to OHT distribution line size & compatible with SCADA system . 270 Installation, commissioning & testing for of above items at one OHT 271 Trial run for three month period for three nos for one OHT 272 Trial & Run period of this zone for 03 Months including liquid chlorine & necessary staff required for operation. (excluding electricity charges) 273 ZONE-2 274 Tube Well 275 Drilling of borehole for Tubewell contruction by RC Rig Machine including transportation, erection, dismantling of Rig and assoiated T & P complete in all respect including required all material, labour etc. 276 Transportation, Erection and Dismantling of Rig Machine 277 Drilling of 500mm size bore from 278 (i) 0M BGL to 100MBGL 279 (ii) 100M BGL to 130MBGL 280 Zone testing in water quality problem areas including all required material, labour, T&P etc. complete in all respect. 281 Tubewell AssemblyM.S. tubewell assembly with all required parts like plain pipe, slotted pipe (as required upto 50% of plain pipes) rings, well cap, bail plug, clamp, reducer, central guide, support structer etc. as required & as per typed design complete in all respect. 282 200 mm. Dia MS ERW Housing/ casing/ Slotted pipe having wall thickness of 7.1mm. 283 Supply of pea gravel 284 Logging of bore hole by departmental / approved electric logger. 285 Lowering of Tube well assembly duly welded including welding electrode and shurounding of pea gravel complete in all respect. 286 Lowering of 200mm dia pipe from 0 to 100m deep BGL. 287 Lowering of 200mm dia pipe from 100 to 120m deep BGL. 288 Development of Tubewell by compressor 289 Transportation, Installation and Dismantling of Air Compressor 290 Development of Tubewell by 250 PSI or requisite Capacity of Air compressor 291 Development of Tubewell by O.P. Unit 292 Transportation, Installation and Dismantling of O.P. Unit & Yield Test. 293 Development of Tubewell by 3 Cusec or requisite Capacity of O.P. Unit 294 Chemical and Bacterological test of water sample from depaprtmental/ approved lab. 295 SITC of Submersible pumpset (600 LPM discharge 88 mtr. head coupled with suitable H.P.of Motor A.C. Three phase) with 24 m. column pipes, NRV,CI D/F Bend 90*, CI A/F Tee, D/F pipe ( 1.5 m. long 02 nos., 1.0m. Long), Earthing,Painting ,Toolset, Servo Stablizer,Wiring of pumphouse internal & external, Chainpulley Block and all Pumping Plant accessories with nut bolts and Rubber packing etc.complete in all respect with all required material, T&P labour etc. 296 Motor operated Actuators with Sluice valve of size 100 mm. or suitable size at Main line and Bye-pass line as well. 297 CE & UL certified Electromagnatic Flowmeter suitable for above line size 100 mm. or suitable size. 298 Soft starter with RS-485 port-400V Class suitable for above motor rating 299 3 Mtr. long heavy duty size 100mm diacolumn pipe same as above spare.( 01 No. set has 02 nos. column pipes) 300 Supply & Laying of Additonal XLPE insulated Copper conductor cable size 2x3cx16 sq mm. or suitable rating required for submersible pump set. 301 Supply & Laying of PVC insulated Al. armoured cable size 1x3.5Cx25 sq mm.or suitable rating requiredfrom transformer LV side to meter panel and meter panel to starter. 302 SITC of Automatic type chlorinating plant solenoid driven dosing pump of capacity 0-6 LPH ( pressure 4kg/cm2 with ORP sensor to check and regulate the dosing along with 200 ltr capacity HDPE tank (02 nos., 1W+1S) ,standard fittings, wall/floor mountings MS bracket for dosing pump with GM Valve ,cock valve & sodium hydro chloride solution.,chlorine test kit with O.T. Solution complete with all respect.( suitable for 100-220V and 30-60 Hz , suction lift- 1.5 m., injection pressure 4 bars, steadt state accuracy +-3% repeatability +-3%) with RS 485 Port O/P having facility of interface with PLC SCADA system. 303 AUTOMATION OF TUBEWELL 304 CE & UL Certified PLC/ RTU in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & features as specified, for each tubewell/ OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations. 305 G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations all accessories included with signal enhancer anteena made for pumping plant internet charges. 306 CE & UL certified Inteligent Smart Energy Meter 307 Auto Phase reversal unit with inbuilt time delay and enclosure (100 Amp.) 308 CE & UL certified Hydrostatic type sub soil water level transmitter for tubewell. 309 CE & UL certified pressure transmitter 310 CE & UL certified Surge protector for above control panel 311 CE & UL certified 7 HMI touch screen suitable to communication with PLC/RTU local display and control of process parameter. 312 Complete cabling of tubewell including all power and control cables of all equipment at pump house and OHT . 313 Control panel with IP-54 protection industrial grade for all equipment separate for control (24V and power equipments) 314 Installation, commissioning & testing for one tubewell 315 Trial run for three month period for three nos for one tubewell 316 Re-development of Borewell upto Bail plug due to borewell filled with waste of material, loose strata etc. over the period of time as per current status with provision of following works as - 317 Transportation, Erection & Dismantling of Air-compressor 318 Charges for development By Air compressor for hours. 319 Transportation, Erection & Dismantling of O.P. unit 320 Charges for development By O.P. unit for hours. 321 Supply & Packing of Pea-gravel to sinking depth during Development. 322 SITC of Submersible pumpset (600 LPM discharge 88 mtr. head coupled with suitable H.P. of Motor A.C. Three phase) with 24 m. column pipes, NRV,CI D/F Bend 90*, CI A/F Tee, D/F pipe ( 1.5 m. long 02 nos., 1.0m. Long), Earthing,Painting ,Toolset, Servo Stablizer,Wiring of pumphouse internal & external, Chainpulley Block and all Pumping Plant accessories with nut bolts and Rubber packing etc.complete in all respect with all required material, T&P labour etc. 323 Motor operated Actuators with Sluice valve of size 100 mm. or suitable size at Main line and Bye-pass line as well. 324 CE & UL certified Electromagnatic Flowmeter suitable for above line size 100 mm. or suitable size. 325 Soft starter with RS-485 port-400V Class suitable for above motor rating 326 3 Mtr. long heavy duty size 100mm diacolumn pipe same as above spare.( 01 No. set has 02 nos. column pipes) 327 Supply & Laying of Additonal XLPE insulated Copper conductor cable size 2x3cx16 sq mm.or suitable rating required for submersible pump set. 328 Supply & Laying of PVC insulated Al. armoured cable size 1x3.5Cx25 sq mm. or suitable rating required from transformer LV side to meter panel and meter panel to starter. 329 SITC of Automatic type chlorinating plant solenoid driven dosing pump of capacity 0-6 LPH ( pressure 4kg/cm2 with ORP sensor to check and regulate the dosing along with 200 ltr capacity HDPE tank (02 nos., 1W+1S) ,standard fittings, wall/floor mountings MS bracket for dosing pump with GM Valve ,cock valve & sodium hydro chloride solution.,chlorine test kit with O.T. Solution complete with all respect.( suitable for 100-220V and 30-60 Hz , suction lift- 1.5 m., injection pressure 4 bars, steadt state accuracy +-3% repeatability +-3%) with RS 485 Port O/P having facility of interface with PLC SCADA system. 330 Dismantling of old puming plant with rusted 6 dia column pipes,panel,stabilizer ,their accessories etc with transportation of material in nagar palika store . 331 AUTOMATION OF TUBE WELL 332 CE & UL Certified PLC/ RTU in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & features as specified, for each tubewell/ OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations. 333 G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations all accessories included with signal enhancer anteena made for pumping plant internet charges. 334 CE & UL certified Inteligent Smart Energy Meter 335 Auto Phase reversal unit with inbuilt time delay and enclosure (100 Amp.) 336 CE & UL certified Hydrostatic type sub soil water level transmitter for tubewell. 337 CE & UL certified pressure transmitter 338 CE & UL certified Surge protector for above control panel 339 CE & UL certified 7 HMI touch screen suitable to communication with PLC/RTU local display and control of process parameter. 340 Complete cabling of tubewell including all power and control cables of all equipment at pump house and OHT . 341 Control panel with IP-54 protection industrial grade for all equipment separate for control (24V and power equipments) 342 Installation, commissioning & testing for one tubewell 343 Trial run for three month period for three nos for one tubewell 344 AUTOMATION OF EXISTING OVERHEAD TANK 345 Motor operated Actuators with Sluice valve of size 450 mm. at distribution line. 346 CE & UL certified Electomagnetic Flowmeter for OHT line size 450 mm. dia. 347 CE & UL certified Radar type level transmitter for OHT 348 Chlorine Analyzer with MODBUS RTU having following specifications- (a) FRC Sensor (Senssit make), range- 0-5 PPM (electrolyte with membrane cap), tytpe-Amperometric. (b) Analyzer with RS 485O/P. suitable to OHT distribution line size & compatible with SCADA system too. 349 Installation, commissioning & testing for of above items at one OHT 350 Trial run for three month period for three nos for one OHT 351 Trial & Run period of this zone for 03 Months including liquid chlorine & necessary staff required for operation. (excluding electricity charges) 352 ZONE-3 353 Tube Well 354 Drilling of borehole for Tubewell contruction by RC Rig Machine including transportation, erection, dismantling of Rig and assoiated T & P complete in all respect including required all material, labour etc. 355 Transportation, Erection and Dismantling of Rig Machine 356 Drilling of 500mm size bore from 357 (i) 0M BGL to 100MBGL 358 (ii) 100M BGL to 130MBGL 359 Zone testing in water quality problem areas including all required material, labour, T&P etc. complete in all respect. 360 Tubewell AssemblyM.S. tubewell assembly with all required parts like plain pipe, slotted pipe (as required upto 50% of plain pipes) rings, well cap, bail plug, clamp, reducer, central guide, support structer etc. as required & as per typed design complete in all respect. 361 200 mm. Dia MS ERW Housing/ casing/ Slotted pipe having wall thickness of 7.1mm. 362 Supply of pea gravel 363 Logging of bore hole by departmental / approved electric logger. 364 Lowering of Tube well assembly duly welded including welding electrode and shurounding of pea gravel complete in all respect. 365 Lowering of 200mm dia pipe from 0 to 100m deep BGL. 366 Lowering of 200mm dia pipe from 100 to 120m deep BGL. 367 Development of Tubewell by compressor 368 Transportation, Installation and Dismantling of Air Compressor 369 Development of Tubewell by 250 PSI or requisite Capacity of Air compressor 370 Development of Tubewell by O.P. Unit 371 Transportation, Installation and Dismantling of O.P. Unit & Yield Test. 372 Development of Tubewell by 3 Cusec or requisite Capacity of O.P. Unit 373 Chemical and Bacterological test of water sample from depaprtmental/ approved lab. 374 SITC of Submersible pumpset (600 LPM discharge 88 mtr. head coupled with suitable H.P.of Motor A.C. Three phase) with 24 m. column pipes, NRV,CI D/F Bend 90*, CI A/F Tee, D/F pipe ( 1.5 m. long 02 nos., 1.0m. Long), Earthing,Painting ,Toolset, Servo Stablizer,Wiring of pumphouse internal & external, Chainpulley Block and all Pumping Plant accessories with nut bolts and Rubber packing etc.complete in all respect with all required material, T&P labour etc. 375 Motor operated Actuators with Sluice valve of size 100 mm. or suitable size at Main line and Bye-pass line as well. 376 CE & UL certified Electromagnatic Flowmeter suitable for above line size 100 mm. or suitable size. 377 Soft starter with RS-485 port-400V Class suitable rating of above motor. 378 3 Mtr. long heavy duty size 100mm diacolumn pipe same as above spare.( 01 No. set has 02 nos. column pipes) 379 Supply & Laying of Additonal XLPE insulated Copper conductor cable size 2x3cx16 sq mm.or suitable rating required for submersible pump set. 380 Supply & Laying of PVC insulated Al. armoured cable size 1x3.5Cx25 sq mm. or suitable rating required from transformer LV side to meter panel and meter panel to starter. 381 SITC of Automatic type chlorinating plant solenoid driven dosing pump of capacity 0-6 LPH ( pressure 4kg/cm2 with ORP sensor to check and regulate the dosing along with 200 ltr capacity HDPE tank (02 nos., 1W+1S) ,standard fittings, wall/floor mountings MS bracket for dosing pump with GM Valve ,cock valve & sodium hydro chloride solution.,chlorine test kit with O.T. Solution complete with all respect.( suitable for 100-220V and 30-60 Hz , suction lift- 1.5 m., injection pressure 4 bars, steadt state accuracy +-3% repeatability +-3%) with RS 485 Port O/P having facility of interface with PLC SCADA system. 382 AUTOMATION OF TUBEWELL 383 CE & UL Certified PLC/ RTU in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & features as specified, for each tubewell/ OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations. 384 G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations all accessories included with signal enhancer anteena made for pumping plant internet charges. 385 CE & UL certified Inteligent Smart Energy Meter 386 Auto Phase reversal unit with inbuilt time delay and enclosure (100 Amp.) 387 CE & UL certified Hydrostatic type sub soil water level transmitter for tubewell. 388 CE & UL certified pressure transmitter 389 CE & UL certified Surge protector for above control panel 390 CE & UL certified 7 HMI touch screen suitable to communication with PLC/RTU local display and control of process parameter. 391 Complete cabling of tubewell including all power and control cables of all equipment at pump house and OHT . 392 Control panel with IP-54 protection industrial grade for all equipment separate for control (24V and power equipments) 393 Installation, commissioning & testing for one tubewell 394 Trial run for three month period for three nos for one tubewell 395 Rebore Tube Well 396 Drilling of borehole for Tubewell contruction by RC Rig Machine including transportation, erection, dismantling of Rig and assoiated T & P complete in all respect including required all material, labour etc. 397 Transportation, Erection and Dismantling of Rig Machine 398 Drilling of 500mm size bore from 399 (i) 0M BGL to 100MBGL 400 (ii) 100M BGL to 130MBGL 401 Zone testing in water quality problem areas including all required material, labour, T&P etc. complete in all respect. 402 Tubewell AssemblyM.S. tubewell assembly with all required parts like plain pipe, slotted pipe (as required upto 50% of plain pipes) rings, well cap, bail plug, clamp, reducer, central guide, support structer etc. as required & as per typed design complete in all respect. 403 200 mm. Dia MS ERW Housing/ casing/ Slotted pipe having wall thickness of 7.1mm. 404 Supply of pea gravel 405 Logging of bore hole by departmental / approved electric logger. 406 Lowering of Tube well assembly duly welded including welding electrode and shurounding of pea gravel complete in all respect. 407 Lowering of 200mm dia pipe from 0 to 100m deep BGL. 408 Lowering of 200mm dia pipe from 100 to 120m deep BGL. 409 Development of Tubewell by compressor 410 Transportation, Installation and Dismantling of Air Compressor 411 Development of Tubewell by 250 PSI or requisite Capacity of Air compressor 412 Development of Tubewell by O.P. Unit 413 Transportation, Installation and Dismantling of O.P. Unit & Yield Test. 414 Development of Tubewell by 3 Cusec or requisite Capacity of O.P. Unit 415 Chemical and Bacterological test of water sample from depaprtmental/ approved lab. 416 SITC of Submersible pumpset (600 LPM discharge 88 mtr. head coupled with suitable H.P.of Motor A.C. Three phase) with 24 m. column pipes, NRV,CI D/F Bend 90*, CI A/F Tee, D/F pipe ( 1.5 m. long 02 nos., 1.0m. Long), Earthing,Painting ,Toolset, Servo Stablizer,Wiring of pumphouse internal & external, Chainpulley Block and all Pumping Plant accessories with nut bolts and Rubber packing etc.complete in all respect with all required material, T&P labour etc. 417 Motor operated Actuators with Sluice valve of size 100 mm. or suitable size at Main line and Bye-pass line as well. 418 CE & UL certified Electromagnatic Flowmeter suitable for above line size 100 mm. or suitable size. 419 Soft starter with RS-485 port-400V Class suitable rating of above motor. 420 3 Mtr. long heavy duty size 100mm diacolumn pipe same as above spare.( 01 No. set has 02 nos. column pipes) 421 Supply & Laying of Additonal XLPE insulated Copper conductor cable size 2x3cx16 sq mm.or suitable rating required for submersible pump set. 422 Supply & Laying of PVC insulated Al. armoured cable size 1x3.5Cx25 sq mm. or suitable rating required from transformer LV side to meter panel and meter panel to starter. 423 SITC of Automatic type chlorinating plant solenoid driven dosing pump of capacity 0-6 LPH ( pressure 4kg/cm2 with ORP sensor to check and regulate the dosing along with 200 ltr capacity HDPE tank (02 nos., 1W+1S) ,standard fittings, wall/floor mountings MS bracket for dosing pump with GM Valve ,cock valve & sodium hydro chloride solution.,chlorine test kit with O.T. Solution complete with all respect.( suitable for 100-220V and 30-60 Hz , suction lift- 1.5 m., injection pressure 4 bars, steadt state accuracy +-3% repeatability +-3%) with RS 485 Port O/P having facility of interface with PLC SCADA system. 424 Dismantling of old puming plant with rusted 6 dia column pipes,panel,stabilizer ,their accessories etc with transportation of material in nagar palika store . 425 Cost for shifting and subsequent erection of 0.433 KV L.T.Power Supplywith connected material from old tubewell to location of rebore tubewell complete. 426 AUTOMATION OF TUBE WELL 427 CE & UL Certified PLC/ RTU in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & features as specified, for each tubewell/ OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations. 428 G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations all accessories included with signal enhancer anteena made for pumping plant internet charges. 429 CE & UL certified Inteligent Smart Energy Meter 430 Auto Phase reversal unit with inbuilt time delay and enclosure (100 Amp.) 431 CE & UL certified Hydrostatic type sub soil water level transmitter for tubewell. 432 CE & UL certified pressure transmitter 433 CE & UL certified Surge protector for above control panel 434 CE & UL certified 7 HMI touch screen suitable to communication with PLC/RTU local display and control of process parameter. 435 Complete cabling of tubewell including all power and control cables of all equipment at pump house and OHT . 436 Control panel with IP-54 protection industrial grade for all equipment separate for control (24V and power equipments) 437 Installation, commissioning & testing for one tubewell 438 Trial run for three month period for three nos for one tubewell 439 AUTOMATION OF EXISTING OVERHEAD TANK 440 Motor operated Actuators with Sluice valve of size 250 mm. at distribution line. 441 CE & UL certified Electomagnetic Flowmeter for OHT line size 250 mm. dia. 442 CE & UL certified Radar type level transmitter for OHT 443 Chlorine Analyzer with MODBUS RTU having following specifications- (a) FRC Sensor (Senssit make), range- 0-5 PPM (electrolyte with membrane cap), tytpe-Amperometric. (b) Analyzer with RS 485O/P. suitable to OHT distribution line size & compatible with SCADA system too. 444 Installation, commissioning & testing for of above items at one OHT 445 Trial run for three month period for three nos for one OHT 446 Trial & Run period of this zone for 03 Months including liquid chlorine & necessary staff required for operation. (excluding electricity charges) 447 ZONE-4 448 Tube Well 449 Drilling of borehole for Tubewell contruction by RC Rig Machine including transportation, erection, dismantling of Rig and assoiated T & P complete in all respect including required all material, labour etc. 450 Transportation, Erection and Dismantling of Rig Machine 451 Drilling of 500mm size bore from 452 (i) 0M BGL to 100MBGL 453 (ii) 100M BGL to 130MBGL 454 Zone testing in water quality problem areas including all required material, labour, T&P etc. complete in all respect. 455 Tubewell AssemblyM.S. tubewell assembly with all required parts like plain pipe, slotted pipe (as required upto 50% of plain pipes) rings, well cap, bail plug, clamp, reducer, central guide, support structer etc. as required & as per typed design complete in all respect. 456 200 mm. Dia MS ERW Housing/ casing/ Slotted pipe having wall thickness of 7.1mm. 457 Supply of pea gravel 458 Logging of bore hole by departmental / approved electric logger. 459 Lowering of Tube well assembly duly welded including welding electrode and shurounding of pea gravel complete in all respect. 460 Lowering of 200mm dia pipe from 0 to 100m deep BGL. 461 Lowering of 200mm dia pipe from 100 to 120m deep BGL. 462 Development of Tubewell by compressor 463 Transportation, Installation and Dismantling of Air Compressor 464 Development of Tubewell by 250 PSI or requisite Capacity of Air compressor 465 Development of Tubewell by O.P. Unit 466 Transportation, Installation and Dismantling of O.P. Unit & Yield Test. 467 Development of Tubewell by 3 Cusec or requisite Capacity of O.P. Unit 468 Chemical and Bacterological test of water sample from depaprtmental/ approved lab. 469 SITC of Submersible pumpset (600 LPM discharge 63 mtr. head coupled with suitable H.P.of Motor A.C. Three phase) with 24 m. column pipes, NRV,CI D/F Bend 90*, CI A/F Tee, D/F pipe ( 1.5 m. long 02 nos., 1.0m. Long), Earthing,Painting ,Toolset, Servo Stablizer,Wiring of pumphouse internal & external, Chainpulley Block and all Pumping Plant accessories with nut bolts and Rubber packing etc.complete in all respect with all required material, T&P labour etc. 470 Motor operated Actuators with Sluice valve of size 100 mm. or suitable size at Main line and Bye-pass line as well. 471 CE & UL certified Electromagnatic Flowmeter suitable for above line size 100 mm. or suitable size. 472 Soft starter with RS-485 port-400V Class suitable rating for above motor. 473 3 Mtr. long heavy duty size 100mm diacolumn pipe same as above spare.( 01 No. set has 02 nos. column pipes) 474 Supply & Laying of Additonal XLPE insulated Copper conductor cable size 1x3cx6 sq mm. or suitable rating required for submersible pump set. 475 Supply & Laying of PVC insulated Al. armoured cable size 1x3.5/4Cx10 sq mm. or suitable rating required from transformer LV side to meter panel and meter panel to starter. 476 AUTOMATION OF TUBEWELL 477 CE & UL Certified PLC/ RTU in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & features as specified, for each tubewell/ OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations. 478 G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations all accessories included with signal enhancer anteena made for pumping plant internet charges. 479 CE & UL certified Inteligent Smart Energy Meter 480 Auto Phase reversal unit with inbuilt time delay and enclosure (100 Amp.) 481 CE & UL certified Hydrostatic type sub soil water level transmitter for tubewell. 482 CE & UL certified pressure transmitter 483 CE & UL certified Surge protector for above control panel 484 CE & UL certified 7 HMI touch screen suitable to communication with PLC/RTU local display and control of process parameter. 485 Complete cabling of tubewell including all power and control cables of all equipment at pump house and OHT . 486 Control panel with IP-54 protection industrial grade for all equipment separate for control (24V and power equipments) 487 Installation, commissioning & testing for one tubewell 488 Trial run for three month period for three nos for one tubewell 489 PumpSet at C.W.R: 490 Supply of Clearwater Submersible Pumpset having Speed 2900 RPM with suitable HP rating of motor compatible for handling Clear Water with Automatic Coupling having following parameters:-(a) Capacity 1800 LPM(b)Total head 32 Mtrs.(c) Delivery size100 mm(d) Material of Construction-:(i) Casing-CI IS210 FG260(ii) Impeller -CF8M, BHN 180 approx.(ii) Shaft - SS 410 , 350 BHN minimum.(iii) Bearing- anti frictional (e) Operational Voltage 380±10% 3 phase AC Supply.(f) Pumpset accessories such as duck foot bend,pedestal auto coupling with guide pipe only (SS) for pump set.Total nos. of 03 Pumpsets are proposed in module of operation in 2nos. are working , 1 Pump is standby . (NOTE- Pump Discharge, Head & motor HP are tentative and may vary marginally as per actual site condition and will procured at same quoted rates. ) 491 Cast iron pipes & specials. 492 Supply ofgalvanized nut- Bolt SS-304 and rubber packing material for erection of above. 493 Reflex Valve 494 CIDF double flanged single/multi door swing check valves PN 1.0 FG200 Grade having body comprising inlet & outlet sheets in gradeed cast iron diaphragm fitted woth st. steel, faces,diaphragm plate and door , sub pins and shall be of following sizes: 495 150 mm dia 496 200 mm dia 497 CI Dismantling joints 498 150 mm dia 499 200 mm dia 500 Monorail Travelling trolley with chain pulley block. 501 Monorail Travelling Trolley with spur gear and 3.0 tonne capacity chain pulley block with 16 m lift. 502 Automatic type Chlorinating Plant 503 SITC of SCADA Compatible Automatic type chlorinating plant solenoid driven dosing pump of capacity 0-40 LPH , pressure 4kg/cm2 with ORP sensor to check and regulate the dosing along with 500 ltr capacity HDPE tank ,standard fittings, wall/floor mountings MS bracket for dosing pump with GM Valve ,cock valve & sodium hydro chloride solution 40 ltrs.,chlorine test kit with O.T. Solution complete with all respect.( suitable for 100-220V and 30-60 Hz , suction lift- 1.5 m., injection pressure 4 bars, steadt state accuracy +-3% repeatability +-3%). 504 L.T. Panel Board 505 L.T. Panel Board suitable for operation on 400 V, 3 Phase 50 Hz. A.C. supply in sheet steel enclosure in cubical pattern floor mounting with following fitted on the phase of the panel with bus incomer bar of suitable Capacity and Bus Bar size and neutral of half the capacity and neutral of half the capacity sectionalized through a bus section. The panel shall comprise of the following. (a) 01 No. incoming feeder with following details:-(i) 01 nos. MCCB of 250 amps,50 KA Micro processor type motorised drawout typefor Two seperate Transformers incomer preferably schneider/ABB with indication lamp mechanical on/off indicator.(ii) One set of current transformer of ratio 250/5A(iii) One No. CT operated ammeter 0-250A with ammeter (iv) One No. Voltmeter 0-500 V with voltmeter (v) One No power factor meter 0.5 lag/ 1-0.5 lead (vi) One No Surge arrestor Relay & One no. UV/OV Relay(vii) One No frequency meter.(b) Total Nos. of Outgoing feeder as follows-(i) MCCB of 63 amps,50KA capacity with indication lamp mechanical on/off indicator. -03 nos.(ii) Ammeter with selector switch.(iii) Single phasing preventer. (iv) Sets of timer and relays for overload and underload.(v) 01 Nos. 63 Amps. MCCB for RTU/PLC Panel.(vi) 01 Nos. 63 Amps. MCCB as Misc. load(vii) 02 Nos. 32 Amps. 4P MCCB for lighting & spare one. 506 01 No. required rating of KVAr APFC Panel with capacitor bank and feeder SFU & MCCB 63 Amp., 25 KA with APFC relay & other acceessories to adjust automatically the power factor upto 0.99. 507 Power and control cables 508 1100 V grade, 3.5/4 core 16mm2 PVC insulated PVC sheathed Aluminium Armoured conductor cablefrom LT panel to starters.(1x3x50 mtr.) 509 1100V grade, 2x3C x10mm2 PVC insulated PVC sheathed submersible copper flat cablefrom junction box to motor 3 Nos pumps. (2x3x25 mtr.) 510 Control cable 1x10C, 1.5 mm2 PVC insulated PVC sheathedCopper conductor cable for moisture sensor Reverse protection thermistor relay etc. 511 EARTHING 512 Complete earthing of all the equipments as detailed above shall be done as per IS/IER/PWD specification with G.I Plates, watering pipe and loop earthing with adequate size of G.I/ Al. strip etc. (PS-702) 02 Nos. each of the equipment(3 Nos Pumps + 1 No. LT Panel + 1 No. PLC Panel.) size of earthing plate 600mm x 600mm x6 mmwith salt and coal. 513 Lighting system: 514 Supply & erection of M.S. Tubular Poles SP-36, 9.5 M height. 515 S/F of 72 watt LED with lumen reflector. 516 Feeder pillar for lighting 517 Supply and laying of 4x16mm2 Al. armoured cable. 518 Internal electrification with fixtures. 519 S/F 1200 mm ceilingFan for LT Room 520 S/F of exhaust Fan for LT Room, CWR room. 521 Earthing of street light pole (SOR-41) 522 Painting of street light (P5-634) 523 Supply and installation of DCP type of 5 Kg. Fire existinguisher(PS-1132) 524 12 mm thick rubber mating for safe working on. 525 Tools 526 Hydrulic crimping tools-Crimping range: 16-300 sq.mm.,Weight: 6 Kg. ,Length: 500mm,Make/ Model:YQK300 527 Mannual crimping tools-Crimping range: 400 sq.mm.,Make/ Model: Crimp well 528 Tong tester (AC/DC-1000A, make-Rishabh)Multimeter (AC/DC-1000A,make-Meco)Megger (AC/DC-500V make-Rishabh)Screwdriver (6x 12, make- Taparia)Plier (250mm, make-Taparia) 529 Chain wrench (12x18, make Taparia) Pipe wrench (1200mm, make Taparia) 530 Chequered plate of required size so as to cover all trenches. 531 Installation of above equipments ,Pumsets and Panels etc. complete. 532 Testing of pumping plantand Panels etc. complete at works 533 Commissioning of pumping plantsand Panels etc. complete 534 AUTOMATION OF CWR 535 CE & UL Certified PLC/ RTU in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & features as specified, for each ZPS/ OHTto store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations. 536 G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations all accessories included with signal enhancer anteena made for pumping plant internet charges. 537 CE & UL certified Inteligent Smart Energy Meter for each pump 538 Motor operated Actuators with Sluice valve of suitable size 150/200 mm. at Delivery line of each pump.(2W+1S) 539 Motor operated Actuators with Sluice valve of suitable size 200/250 mm. at common header. 540 CE & UL certified Electro magnatic flow Meter suitable for line size 250 mm. 541 Soft starter with RS-485 port-400V Class suitable rating for each pump 542 Auto Phase reversal unit with inbuilt time delay and enclosure (100 Amp.) for each pump. 543 CE & UL certified Radar type water level transmitter for OHT as well as CWR. 544 CE & UL certified pressure transmitter for each pump 545 CE & UL certified Surge protector for control panel 546 CE & UL certified 7 HMI touch screen suitable to communication with PLC/RTU local display and control of process parameter. 547 Complete cabling of CWR including all power and control cables of all equipment at CWR and OHT . 548 Control panel with IP-54 protection industrial grade for all equipment separate for control (24V and power equipments) 549 Installation, commissioning & testing for CWR 550 Trial run for three month period for one CWR 551 AUTOMATION OF NEW OVERHEAD TANK 552 Motor operated Actuators with Sluice valve of size 500 mm. at distribution line. 553 CE & UL certified Electomagnetic Flowmeter for OHT line size 500 mm. dia. 554 CE & UL certified Radar type level transmitter for OHT 555 Chlorine Analyzer with MODBUS RTU having following specifications- (a) FRC Sensor (Senssit make), range- 0-5 PPM (electrolyte with membrane cap), tytpe-Amperometric. (b) Analyzer with RS 485O/P. suitable to OHT distribution line size & compatible with SCADA system too. 556 Installation, commissioning & testing for of above items at one OHT 557 Trial run for three month period for three nos for one OHT 558 Trial & Run period of this zone for 03 Months including liquid chlorine & necessary staff required for operation. (excluding electricity charges) 559 ZONE-5 560 Tube Well 561 Drilling of borehole for Tubewell contruction by RC Rig Machine including transportation, erection, dismantling of Rig and assoiated T & P complete in all respect including required all material, labour etc. 562 Transportation, Erection and Dismantling of Rig Machine 563 Drilling of 500mm size bore from 564 (i) 0M BGL to 100MBGL 565 (ii) 100M BGL to 130MBGL 566 Zone testing in water quality problem areas including all required material, labour, T&P etc. complete in all respect. 567 Tubewell AssemblyM.S. tubewell assembly with all required parts like plain pipe, slotted pipe (as required upto 50% of plain pipes) rings, well cap, bail plug, clamp, reducer, central guide, support structer etc. as required & as per typed design complete in all respect. 568 200 mm. Dia MS ERW Housing/ casing/ Slotted pipe having wall thickness of 7.1mm. 569 Supply of pea gravel 570 Logging of bore hole by departmental / approved electric logger. 571 Lowering of Tube well assembly duly welded including welding electrode and shurounding of pea gravel complete in all respect. 572 Lowering of 200mm dia pipe from 0 to 100m deep BGL. 573 Lowering of 200mm dia pipe from 100 to 120m deep BGL. 574 Development of Tubewell by compressor 575 Transportation, Installation and Dismantling of Air Compressor 576 Development of Tubewell by 250 PSI or requisite Capacity of Air compressor 577 Development of Tubewell by O.P. Unit 578 Transportation, Installation and Dismantling of O.P. Unit & Yield Test. 579 Development of Tubewell by 3 Cusec or requisite Capacity of O.P. Unit 580 Chemical and Bacterological test of water sample from depaprtmental/ approved lab. 581 SITC of Submersible pumpset (600 LPM discharge 88 mtr. head coupled with suitable H.P.of Motor A.C. Three phase) with 24 m. column pipes, NRV,CI D/F Bend 90*, CI A/F Tee, D/F pipe ( 1.5 m. long 02 nos., 1.0m. Long), Earthing,Painting ,Toolset, Servo Stablizer,Wiring of pumphouse internal & external, Chainpulley Block and all Pumping Plant accessories with nut bolts and Rubber packing etc.complete in all respect with all required material, T&P labour etc. 582 Motor operated Actuators with Sluice valve of size 100 mm. or suitable size at Main line and Bye-pass line as well. 583 CE & UL certified Electromagnatic Flowmeter suitable for above line size 100 mm. or suitable size. 584 Soft starter with RS-485 port-400V Class suitable rating of above motor 585 3 Mtr. long heavy duty size 100mm diacolumn pipe same as above spare.( 01 No. set has 02 nos. column pipes) 586 Supply & Laying of Additonal XLPE insulated Copper conductor cable size 1x3cx16 sq mm. or suitable rating required for submersible pump set. 587 Supply & Laying of PVC insulated Al. armoured cable size 1x3.5Cx25 sq mm. or suitable rating required from transformer LV side to meter panel and meter panel to starter. 588 SITC of Automatic type chlorinating plant solenoid driven dosing pump of capacity 0-6 LPH ( pressure 4kg/cm2 with ORP sensor to check and regulate the dosing along with 200 ltr capacity HDPE tank (02 nos., 1W+1S) ,standard fittings, wall/floor mountings MS bracket for dosing pump with GM Valve ,cock valve & sodium hydro chloride solution.,chlorine test kit with O.T. Solution complete with all respect.( suitable for 100-220V and 30-60 Hz , suction lift- 1.5 m., injection pressure 4 bars, steadt state accuracy +-3% repeatability +-3%) with RS 485 Port O/P having facility of interface with PLC SCADA system. 589 AUTOMATION OF TUBEWELL 590 CE & UL Certified PLC/ RTU in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & features as specified, for each tubewell/ OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations. 591 G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations all accessories included with signal enhancer anteena made for pumping plant internet charges. 592 CE & UL certified Inteligent Smart Energy Meter 593 Auto Phase reversal unit with inbuilt time delay and enclosure (100 Amp.) 594 CE & UL certified Hydrostatic type sub soil water level transmitter for tubewell. 595 CE & UL certified pressure transmitter 596 CE & UL certified Surge protector for above control panel 597 CE & UL certified 7 HMI touch screen suitable to communication with PLC/RTU local display and control of process parameter. 598 Complete cabling of tubewell including all power and control cables of all equipment at pump house and OHT . 599 Control panel with IP-54 protection industrial grade for all equipment separate for control (24V and power equipments) 600 Installation, commissioning & testing for one tubewell 601 Trial run for three month period for three nos for one tubewell 602 AUTOMATION OF NEW OVERHEAD TANK 603 Motor operated Actuators with Sluice valve of size 450 mm. at distribution line. 604 CE & UL certified Electomagnetic Flowmeter for OHT line size 450 mm. dia. 605 CE & UL certified Radar type level transmitter for OHT 606 Chlorine Analyzer with MODBUS RTU having following specifications- (a) FRC Sensor (Senssit make), range- 0-5 PPM (electrolyte with membrane cap), tytpe-Amperometric. (b) Analyzer with RS 485O/P. suitable to OHT distribution line size & compatible with SCADA system too. 607 Installation, commissioning & testing for of above items at one OHT 608 Trial run for three month period for three nos for one OHT 609 Trial & Run period of this zone for 03 Months including liquid chlorine & necessary staff required for operation. (excluding electricity charges) 610 ZONE-6 611 Tube Well 612 Drilling of borehole for Tubewell contruction by RC Rig Machine including transportation, erection, dismantling of Rig and assoiated T & P complete in all respect including required all material, labour etc. 613 Transportation, Erection and Dismantling of Rig Machine 614 Drilling of 500mm size bore from 615 (i) 0M BGL to 100MBGL 616 (ii) 100M BGL to 130MBGL 617 Zone testing in water quality problem areas including all required material, labour, T&P etc. complete in all respect. 618 Tubewell AssemblyM.S. tubewell assembly with all required parts like plain pipe, slotted pipe (as required upto 50% of plain pipes) rings, well cap, bail plug, clamp, reducer, central guide, support structer etc. as required & as per typed design complete in all respect. 619 200 mm. Dia MS ERW Housing/ casing/ Slotted pipe having wall thickness of 7.1mm. 620 Supply of pea gravel 621 Logging of bore hole by departmental / approved electric logger. 622 Lowering of Tube well assembly duly welded including welding electrode and shurounding of pea gravel complete in all respect. 623 Lowering of 200mm dia pipe from 0 to 100m deep BGL. 624 Lowering of 200mm dia pipe from 100 to 120m deep BGL. 625 Development of Tubewell by compressor 626 Transportation, Installation and Dismantling of Air Compressor 627 Development of Tubewell by 250 PSI or requisite Capacity of Air compressor 628 Development of Tubewell by O.P. Unit 629 Transportation, Installation and Dismantling of O.P. Unit & Yield Test. 630 Development of Tubewell by 3 Cusec or requisite Capacity of O.P. Unit 631 Chemical and Bacterological test of water sample from depaprtmental/ approved lab. 632 SITC of Submersible pumpset (600 LPM discharge 63 mtr. head coupled with suitable H.P.of Motor A.C. Three phase) with 24 m. column pipes, NRV,CI D/F Bend 90*, CI A/F Tee, D/F pipe ( 1.5 m. long 02 nos., 1.0m. Long), Earthing,Painting ,Toolset, Servo Stablizer,Wiring of pumphouse internal & external, Chainpulley Block and all Pumping Plant accessories with nut bolts and Rubber packing etc.complete in all respect with all required material, T&P labour etc. 633 Motor operated Actuators with Sluice valve of size 100 mm. or suitable size at Main line and Bye-pass line as well. 634 CE & UL certified Electromagnatic Flowmeter suitable for above line size 100 mm. or suitable size. 635 Soft starter with RS-485 port-400V Class suitable rating of above motor 636 3 Mtr. long heavy duty size 100mm diacolumn pipe same as above spare.( 01 No. set has 02 nos. column pipes) 637 Supply & Laying of Additonal XLPE insulated Copper conductor cable size 1x3cx6 sq mm. or suitable rating required for submersible pump set. 638 Supply & Laying of PVC insulated Al. armoured cable size 1x3.5/4Cx10 sq mm.suitable rating required from transformer LV side to meter panel and meter panel to starter. 639 AUTOMATION OF TUBEWELL 640 CE & UL Certified PLC/ RTU in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & features as specified, for each tubewell/ OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations. 641 G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations all accessories included with signal enhancer anteena made for pumping plant internet charges. 642 CE & UL certified Inteligent Smart Energy Meter 643 Auto Phase reversal unit with inbuilt time delay and enclosure (100 Amp.) 644 CE & UL certified Hydrostatic type sub soil water level transmitter for tubewell. 645 CE & UL certified pressure transmitter 646 CE & UL certified Surge protector for above control panel 647 CE & UL certified 7 HMI touch screen suitable to communication with PLC/RTU local display and control of process parameter. 648 Complete cabling of tubewell including all power and control cables of all equipment at pump house and OHT . 649 Control panel with IP-54 protection industrial grade for all equipment separate for control (24V and power equipments) 650 Installation, commissioning & testing for one tubewell 651 Trial run for three month period for three nos for one tubewell 652 PumpSet at C.W.R: 653 Supply of Clearwater Submersible Pumpset having Speed 2900 RPM with suitable HP rating of motor compatible for handling Clear Water with Automatic Coupling having following parameters:-(a) Capacity 1900 LPM(b)Total head 32 Mtrs.(c) Delivery size100 mm(d) Material of Construction-:(i) Casing-CI IS210 FG260(ii) Impeller -CF8M, BHN 180 approx.(ii) Shaft - SS 410 , 350 BHN minimum.(iii) Bearing- anti frictional (e) Operational Voltage 380±10% 3 phase AC Supply. (f) Pumpset accessories such as duck foot bend,pedestal auto coupling with guide pipe only (SS) for pump set.Total nos. of 03 Pumpsets are proposed in module of operation in 2nos. are working , 1 Pump is standby .(NOTE- Pump Discharge, Head & motor HP are tentative and may vary marginally as per actual site condition and will procured at same quoted rates. ) 654 Cast iron pipes & specials. 655 Supply ofgalvanized nut- Bolt SS-304 and rubber packing material for erection of above. 656 Reflex Valve 657 CIDF double flanged single/multi door swing check valves PN 1.0 FG200 Grade having body comprising inlet & outlet sheets in gradeed cast iron diaphragm fitted woth st. steel, faces,diaphragm plate and door , sub pins and shall be of following sizes: 658 150 mm dia 659 200 mm dia 660 CI Dismantling joints 661 150 mm dia 662 200 mm dia 663 Monorail Travelling trolley with chain pulley block. 664 Monorail Travelling Trolley with spur gear and 3.0 tonne capacity chain pulley block with 16 m lift. 665 Automatic type Chlorinating Plant 666 SITC of SCADA Compatible Automatic type chlorinating plant solenoid driven dosing pump of capacity 0-40 LPH , pressure 4kg/cm2 with ORP sensor to check and regulate the dosing along with 500 ltr capacity HDPE tank ,standard fittings, wall/floor mountings MS bracket for dosing pump with GM Valve ,cock valve & sodium hydro chloride solution 40 ltrs.,chlorine test kit with O.T. Solution complete with all respect.( suitable for 100-220V and 30-60 Hz , suction lift- 1.5 m., injection pressure 4 bars, steadt state accuracy +-3% repeatability +-3%). 667 L.T. Panel Board 668 L.T. Panel Board suitable for operation on 400 V, 3 Phase 50 Hz. A.C. supply in sheet steel enclosure in cubical pattern floor mounting with following fitted on the phase of the panel with bus incomer bar of suitable Capacity and Bus Bar size and neutral of half the capacity and neutral of half the capacity sectionalized through a bus section. The panel shall comprise of the following.(a) 01 No. incoming feeder with following details:-(i) 01 nos. MCCB of 250 amps,50 KA Micro processor type motorised drawout typefor Two seperate Transformers incomer preferably schneider/ABB with indication lamp mechanical on/off indicator.(ii) One set of current transformer of ratio 250/5A(iii) One No. CT operated ammeter 0-250A with ammeter (iv) One No. Voltmeter 0-500 V with voltmeter (v) One No power factor meter 0.5 lag/ 1-0.5 lead (vi) One No Surge arrestor Relay & One no. UV/OV Relay(vii) One No frequency meter.(b) Total Nos. of Outgoing feeder as follows-(i) MCCB of 63 amps,50KA capacity with indication lamp mechanical on/off indicator. -03 nos.(ii) Ammeter with selector switch.(iii) Single phasing preventer. (iv) Sets of timer and relays for overload and underload.(v) 01 Nos. 63 Amps. MCCB for RTU/PLC Panel.(vi) 01 Nos. 63 Amps. MCCB as Misc. load(vii) 02 Nos. 32 Amps. 4P MCCB for lighting & spare one. 669 01 No. required rating of KVAr APFC Panel with capacitor bank and feeder SFU & MCCB 63 Amp., 25 KA with APFC relay & other acceessories to adjust automatically the power factor upto 0.99. 670 Power and control cables 671 1100 V grade, 3.5/4 core 16mm2 PVC insulated PVC sheathed Aluminium Armoured conductor cablefrom LT panel to starters.(1x3x50 mtr.) 672 1100V grade, 2x3C x10mm2 PVC insulated PVC sheathed submersible copper flat cablefrom junction box to motor 3 Nos pumps. (2x3x25 mtr.) 673 Control cable 1x10C, 1.5 mm2 PVC insulated PVC sheathedCopper conductor cable for moisture sensor Reverse protection thermistor relay etc. 674 EARTHING 675 Complete earthing of all the equipments as detailed above shall be done as per IS/IER/PWD specification with G.I Plates, watering pipe and loop earthing with adequate size of G.I/ Al. strip etc. (PS-702) 02 Nos. each of the equipment(3 Nos Pumps + 1 No. LT Panel + 1 No. PLC Panel.) size of earthing plate 600mm x 600mm x6 mmwith salt and coal. 676 Lighting system: 677 Supply & erection of M.S. Tubular Poles SP-36, 9.5 M height. 678 S/F of 72 watt LED with lumen reflector. 679 Feeder pillar for lighting 680 Supply and laying of 4x16mm2 Al. armoured cable. 681 Internal electrification with fixtures. 682 S/F 1200 mm ceilingFan for LT Room 683 S/F of exhaust Fan for LT Room, CWR room. 684 Earthing of street light pole (SOR-41) 685 Painting of street light (P5-634) 686 Supply and installation of DCP type of 5 Kg. Fire existinguisher(PS-1132) 687 12 mm thick rubber mating for safe working on. 688 Tools 689 Hydrulic crimping tools-Crimping range: 16-300 sq.mm.,Weight: 6 Kg. ,Length: 500mm,Make/ Model:YQK300 690 Mannual crimping tools-Crimping range: 400 sq.mm.,Make/ Model: Crimp well 691 Tong tester (AC/DC-1000A, make-Rishabh)Multimeter (AC/DC-1000A,make-Meco)Megger (AC/DC-500V make-Rishabh)Screwdriver (6x 12, make- Taparia)Plier (250mm, make-Taparia) 692 Chain wrench (12x18, make Taparia) Pipe wrench (1200mm, make Taparia) 693 Chequered plate of required size so as to cover all trenches. 694 Installation of above equipments ,Pumsets and Panels etc. complete. 695 Testing of pumping plantand Panels etc. complete at works 696 Commissioning of pumping plantsand Panels etc. complete 697 AUTOMATION OF CWR 698 CE & UL Certified PLC/ RTU in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & features as specified, for each ZPS/ OHTto store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations. 699 G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations all accessories included with signal enhancer anteena made for pumping plant internet charges. 700 CE & UL certified Inteligent Smart Energy Meter for each pump 701 Motor operated Actuators with Sluice valve of suitable size 150/200 mm. at Delivery line of each pump.(2W+1S) 702 Motor operated Actuators with Sluice valve of suitable size 200/250 mm. at common header. 703 CE & UL certified Electro magnatic flow Meter suitable for line size 250 mm. 704 Soft starter with RS-485 port-400V Class suitable rating for each pump 705 Auto Phase reversal unit with inbuilt time delay and enclosure (100 Amp.) for each pump. 706 CE & UL certified Radar type water level transmitter for OHT as well as CWR. 707 CE & UL certified pressure transmitter for each pump 708 CE & UL certified Surge protector for control panel 709 CE & UL certified 7 HMI touch screen suitable to communication with PLC/RTU local display and control of process parameter. 710 Complete cabling of CWR including all power and control cables of all equipment at CWR and OHT . 711 Control panel with IP-54 protection industrial grade for all equipment separate for control (24V and power equipments) 712 Installation, commissioning & testing for CWR 713 Trial run for three month period for one CWR 714 AUTOMATION OF NEW OVERHEAD TANK 715 Motor operated Actuators with Sluice valve of size 500 mm. at distribution line. 716 CE & UL certified Electomagnetic Flowmeter for OHT line size 500 mm. dia. 717 CE & UL certified Radar type level transmitter for OHT 718 Chlorine Analyzer with MODBUS RTU having following specifications- (a) FRC Sensor (Senssit make), range- 0-5 PPM (electrolyte with membrane cap), tytpe-Amperometric. (b) Analyzer with RS 485O/P. suitable to OHT distribution line size & compatible with SCADA system too. 719 Installation, commissioning & testing for of above items at one OHT 720 Trial run for three month period for three nos for one OHT 721 Trial & Run period of this zone for 03 Months including liquid chlorine & necessary staff required for operation. (excluding electricity charges) 722 MASTER CONTROL STATION (M.C.S.) 723 CE & BIS approved manufacturers industrial grade LED monitor size 65 with latest configuration as per specification mentioned in tender documents. 724 Desktop/PC with i5/i7 processor as per specification mentioned in tender documents. 725 CE/UL approved manufacturers 5 KVA UPS with batteries as per specification mentioned in tender documents. 726 Full development version of required TAGS SCADA software suitable for digital and analog input/output features with customization of software as per requirement as per spec. mentioned with unlimited digital and analog Input/Output features specified in detailed technical document with customization of software as requirement 727 CE & UL approved manufacturers control room PLC with Redundant CPU & power supply at MCS in IP54 enclosure as per specification mentioned in tender documents. 728 CE/UL certified field gateway agent for transfering data from MCS to Central control room(C.C.R.) 729 GSM based wireless / broadband/Equipment communication system for PLC capable to transfer and retreive data & gather data from remote sites to control stations, including all accessories complete. All accessories included signal enhancer antenna along with running expenses till DLP. 730 CE/UL approved manufacturers Firewall for network protection 731 Surge protector for ethernet communication protection 732 CE/UL approved manufacturers industrial grade ethernet switch 733 Mobile App facility system architecture complete.( industries internet based & viewed through mobile apps for increased local & remote visibility) 734 Canon/HP 1018/equivalent Laser printer 735 Security Survelliance IP camera 736 Installation, testing and commissioning with required furniture,Air Conditioner etc 737 Test and trial run 738 Deputation of SCADA skilled Operators at MCS for smooth operation for 03 months in module of total 04 nos. , (3+1) One per shift with weekly reliever.

INR 23600 /-

INR 4333000.0 /-

INR 43.33 Crore /-

FileName	File Description	File Size
Click here to download tender document	Tender Document	0 KB
Click here to download tender document	Tender Notice	0 KB
Click here to download tender document	Tender Document	0 KB
Click here to download tender document	Tender Document	0 KB