tender for Due to change of residence in house no. 10 at Gautampalli colony, replacement of shatigrist floor tiles in entire house, renovation of four showers/toilets, replacement of damaged doors/windows, false ceiling in bedroom, extension of kitchen by combining kitchen and storeroom to make modular kitchen, replacement of shatigrist plaster, re-plastering and other necessary miscellaneous repair works, 1 Dismantling Tile work in Floor and roof laid in cement mortar including stacking material within 50 meters lead. Forthickness of tiles 25 mm to 40 mm. DAR.N0-15.23.2 2 Dismantling Old Plaster or SkirtingRacking out joint and cleaning the surface for plasterincluding disposal of rubbish to the dumping ground within 50 metars lead. DAR No-15.56, 3 12 mm thick Cement Plaster with Cement mortar in proportion of mix 1:4 (1 cement : 4 coarse sand). DAR-13.4.1, ( 4 DismantlingDoors, windows and clerestory window (Steel or Wood) shutterincluding chaukhat, architrave, holdfast etc. complete and stacking within 50 meters lead of area 3 sqm and below. DAR.No-15.12.1, 5 Providing wood work in frame of doors, window, clerestory window and other frames,wrought framed and fixed in posotion with hold fast lugs or with dash fasteneres of reqiured dia & lenght (hold fast lugs or dash fastener shall be paid of separately.(Sal wood,DAR-9.1.2, 6 Providing and Fixing 19 mm thick POP False Ceiling with Murga Jali and Steel Section and Perameter Channal and Hungers Fixeres etc. Complete as Per Direction of Engineer in Charge. 7 Providing and laying Vitrified floor Size of Tile 600x1200 mm in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved Make, in all colours & shades, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing with grey Cement Slurry @ 3.3 kg/Sqm including grouting the joint with white cement and matching Pigments etc. Complete.. (DAR-11.41A.2.2) 8 Providing and laying Vitrified floor Size of Tile 600x600 mm in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved Make, in all colours & shades, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing with grey Cement Slurry @ 3.3 kg/Sqm including grouting the joint with white cement and matching Pigments etc. Complete.. (DAR-11.41.2) 9 Providing and laying Rectifited Glazed Ceramic floor tiles of Size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with Grey cement Slurry @3.3kg/Sqm including Grouting the Joints with and matching pigment etc., complete. (DAR-11.40) 10 Providing and laying Floor/wall tiles Sizes-300X600mm(thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement Mortar 1:4 (1 cement 4 Coarse Sand) jointings with Grey Cement Slurry @3.3 kg/Sqm including Grouting the joints with white Cement and matching Pigment etc. Complete, as per direction of Engineer-in-charge. (Kajaria/Johnson/RAK Premium quality) 11 Providing and fixing Ist quality Ceramic Glazed Wall tiles Conforming to IS :15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, blackas approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Size-300x450 mm, (DAR-8.31), 12 Providing and Fixing 18 mm thick gang saw cut, Mirror Polished, Premoulded and Prepolished, Machine cut for Kitchen Platform, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm thickbase Cement Mortar 1:4 (1 Cement: 4 Coarse Sand) joints treated with white cement mixed with matching pigment epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. cmplete at all levels. Granite Stone slab of Colour black, cherry/ruby redArea of Slab upto 0.50 sqm. (DAR-8.2.2.1, 13 Providing and Fixing of Kitchen Cabinet 60 cm Depth with Centurey Ply 19mm thick of Superior quality and both side Laminated 1mm thick sunmica Supirior quality Fixing with Glue and Nails etc and Fixing of Stainless Steel Fittings as Handle, Hinges etc. Complete work as Per Direction of Engineer in Charge. 14 Providing and Fixing Kitchen Cup Board 30cm Depth 19 mm thick Century Ply ISI marked Superior quality and Both Side Laminated 1mm thick Texture Sunmica Supirior quality Fixing with Glue and Nails etc and Fixing of Stainless Steel Fittings as Handle, Hinges etc. Complete work as Per Direction of Engineer in Charge. 15 Supply and fixing of Double Bowl Sinks with drain board 1.0 mm thick 304 grade stainless steel Size-1155X515 mm (45.5x20.5) lnstallation Top mount depth 205 mm (8) Cat No-B4513202 Gloss finish Cera make. with C.P. Sink Jali and C.P. Waste Pipe including Supply of all material, labour, T&P etc. for proper completion of work. 16 Supply and Fixing Fusion Single Lever Sink Mixer Swinging Spout on Upper Side (Wall mounted Model) with Connecting Legs & Wall Flanges, Jaguar make Code N0-FUS-29165, including supply of all material, labour, T&P etc. Complete. 17 Supply and Fixing of Peacock Storage Solution Kicthen Accesorise- Cup & Saucer Basket-15x20x4, Rate-2182/1.18=1849 18 Plate Basket 15x20x6, Rate-2182/1.18=1849 19 Thali Basket 15x20x8, Rate-2430/1.18=2059 20 Cutlery wire Basket-15x20x4, Rate-2830/1.18=2398 21 Cutlery Perforated Basket-15x20x4, Rate-3478/1.18=2947 22 Partition Basket-15x20x8, Rate-2754/1.18=2334 23 Vegetable Basket-15x20x6, Rate-1820/1.18=1542 24 Bottle Basket-15x20x6, Rate-2830/1.18=2398 25 Wire Glass Tray Plate Tray-28x10x, Rate-2916/1.18=2471 26 Supply and Fixing of C.P. Angular Stop Cock with Wall Flange Jaguar Make. Code N0-FUS-29053, including supply of all material & labour and T & P etc. requird for proper completion of work. 27 Providing and Fixing of 15mm dia C.P. brass Bib Cock with wall Flange Jaguar Make Code N0-FUS-29037, including supply of all material, labour, T&P etc. complete. 28 Supply and Fixing of 15mm dia C.P. brass Two way bib cock with Wall Flange Jaguar Make Code N0-FUS-29041, including supply of all material, labour, T&P etc. complete. 29 Supply and Fixing of C.P. Brass Single Lever Extended Basin Mixer (Height 85 mm) without Pop-Up Waste System with 450 mm long braided hoses, Jaguar Make Code N0-FUS-29023B, including supply of all material, labour T&P etc. complete. 30 Supply and Fixing of C.P. Brass Wall Mixter 3-in-1, System with Provision for both hand shower and overhead shower Complete with 115 mm long Bend Pipe, Connecting Legs & Flange (without Hand & Overhead Shower), Jaguar Make Code N0-FUS-29281, including supply of all material, labour T&P etc. complete. 31 Supply and fixing of CPhand Shower Ø95mm round shape single flow (ABS body in chrome Plated with Grey Face Plate) with rubit cleaning sysyem of Jaquar make (Code No- HSH -1737) with Flaxible Tube 8 mm dia & 1.5m long with nuts Code no-SHA-549D8 including supply of all material & Labour and T&P etc complete. 32 S/F of Maze Over head Shower 300x300 mm Square Shape Single Flow (Body & Face Plate Stainless Steel) with Rubit Cleaning System with Shower Arm 60x25x25 mm Square Shape for wall mounted showers with Flange Jaguar make, Code No-OHS-1639+SHA-455L600lncluding supply of all material & labour and T & P etc. requird for proper completion of work. 33 S/F 15mm dia C.P. health faucet with 8mm dia 1.20 Metre meter long flexible tube & wall hook, Jaquar make Code N0-ALD-573, including supply of all material, labour, T&P etc. complete. (Rs-1631)_ 34 Providing and fixing of Rimless Single Piece WC with UF Soft Close Slim Seat Cover Hinges, Dual flush Cistern Fittings, FixingAccessories and Accessories Set, Size-395x710x730 mm. S Trap 300 mm Code N0-VGS-WHT-81853S300UF, Jaquar make, including Cutting and making good the walls and floors wherever required: 35 Supply and fixing of Aria Wall Hung Basin With Pedestal, Size 570X470x190 mm ARS-WHT-39801+ARS-WHT-39301, Jaquar makewith C.P. jali, PVC waste pipe, Bracket, pvc connection pipe 15mm dia 450mm long etc complete including supply of all materials, Labours,T & P etc. required for proper completion of the work. 36 S/F of C.P. brass Soap Dish Holder Jaquar Make Code N0-AQN-7731N, including supply of all material, labour, T&P etc. complete. 37 S/F of C.P. brass toilet Roll/Papar Holder with Flap Jaguar make Code N0-AKP-39753PS, including supply of all material, labour, T&P etc. complete. 38 S/F of C.P. Brass Single Towel Rack 600 mm with long hungers Jaguar make Code N0-AKP-35781PS, including supply of all material & labour and T & P etc. requird for proper completion of work. 39 S/F of C.P. brass towel ring Square Jaguar make Code N0-AKP-35721P, including supply of all material & labour and T & P etc. requird for proper completion of work. 40 S/F of C.P. trumbler holder Jaguar Make Code N0-AKP-35741P, including supply of all material & labour and T & P etc. requird for proper completion of work. 41 Supply and Fixing of Glass Shelf 600 mm long Jaquar make Code N0-AKP-35771P, including supply of all material, labour, T&P etc. Complete. 42 Supply and Fixing of Corner Glass Shelf (With Bracket) Jaguar make Code N0-ACN-1173, including supply of all material, labour, T&P etc. Complete.(Rs-1700) 43 Supply and Fixing of S.S. Jali 125 mm dia, 44 Supply and Fixing of PVCNahani Trep, 45 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass Screws and washers complete. (17.31). 46 Providing and placing on terrace (at all floor levels ) Polyethylene Water Storage Tank. IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for intel, outlet and overflow pipes but without fittings and the base support for tank. DSR- 18.48) 47 Providing and fixing Chlorinated Polyyinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plains & brass threated fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joints of pipe and fitting with one step CPVC solventcement and the cost of cuttings chases and making good the same including testing of joints complete as per direction of Engineer Incharge. concealed work. including cutting chases and making good the walls etc. (20mm nominal outer dia pipe )18.8.2 48 Providing and fixing Chlorinated Polyyinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plains & brass threated fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joints of pipe and fitting with one step CPVC solventcement and the cost of cuttings chases and making good the same including testing of joints complete as per direction of Engineer Incharge. concealed work. including cutting chases and making good the walls etc. (25mm nominal outer dia pipe )18.8.3, 49 Providing and fixing on Wall Face Unplasticised Rigid PVC rain water Pipes conforming to IS:13592 Type A, including Jointing with Seal ring conforming to IS:5382, Leaving 10mm Gap for thermal expansion, all fittings like two nos bend, one mo Coupler or any other accessories and P/F PVC pipe clips fixed by means of 50X50X50mm hard wood plug, Secrewed with MS Screws of required lenght in wall face including cutting brick work and fixing in cement mortar 1:4 (i) Single Socketed pipes 75mm dia meter. 50 Providing and fixing on Wall Face Unplasticised Rigid PVC rain water Pipes conforming to IS:13592 Type A, including Jointing with Seal ring conforming to IS:5382, Leaving 10mm Gap for thermal expansion, all fittings like two nos bend, one mo Coupler or any other accessories and P/F PVC pipe clips fixed by means of 50X50X50mm hard wood plug, Secrewed with MS Screws of required lenght in wall face including cutting brick work and fixing in cement mortar 1:4 (i) Single Socketed pipes 110mm dia meter. 51 Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 Note:- Structural design proof checked from a Government Engineering Institute, to be provided shall be paid separately. by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 – Part 3 (ii) Sites with structure height more than 20m for all wind speeds Using R2 series with frame (70mm & above) x (40mm & above) & Glazed sash (25mm & above) x (50mm & above) with zinc alloy (zamak powder coated touch locks with hook (Height upto 1.2 metre).Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. As DSR -9.147.A4.1, 52 Providing and fixing factory made uPVC glazed/wire mesh windows / doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, iSection of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge.Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 Note:- Structural design proof checked from a Government Engineering Institute, to be provided shall be paid separately. by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 – Part 3 (ii) Sites with structure height more than 20m for all wind speeds, Fixed window/ventilator without mullion/ transon. Using R1 series with frame (33mm & above) x (35mm & above). (Height upto 0.90 metre ) As DSR-9.147.C1.1, 53 Demolishing Brick work manualy by mechanical means including stacking of Steel bars and disposal of unseviceable matarial with 50 metres lead as per direction of Engineer-in charge in Lime Mortar . DAR N0-15.7.3, 54 Providing and fixing on Wall Face Unplasticised Rigid PVC rain water Pipes conforming to IS:13592 Type A, including Jointing with Seal ring conforming to IS:5382, Leaving 10mm Gap for thermal expansion, all fittings like two nos bend, one mo Coupler or any other accessories and P/F PVC pipe clips fixed by means of 50X50X50mm hard wood plug, Secrewed with MS Screws of required lenght in wall face including cutting brick work and fixing in cement mortar 1:4 (i) Single Socketed pipes 160 mm dia meter. 55 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. DAR No-15.60,
