Tender For Provision Of Certain Sanctioned Works In The Area Of Age B/R-Ii And Age E/M Under Ge (West) Delhi Cantt-10; 1.00 Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation etc or shafts , wells, cesspitss, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and directed. 2.00 M & L 1:4:8 type D2 (40 mm grade stone aggregate ) cement concrete in foundations filling and mass concrete complete all as specified and directed. 3.00 M&L Brick work with class `B’ bricks straight or curved on plan exc 6 M in radius using old size bricks built in CM 1:6 complete all as specified and directed. 4.00 Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. 5.00 Form work soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work n exc 200 mm thick horizontal of sloping for flat rough finished surfaces of concrete complete all as spcified and directed. 6.00 Form work to side foundation of columns with rough finished surfaces of concrete of square, rectangular or polygonal complete all as spcified and directed. 7.00 Form work to columns pillars, piers, posts and struts complete all as specified and directed. 8.00 Form work to sides & soffits of beams, lintels, shelves,cantilevers,overhangs etc with flat rough finished surfaces of concrete complete all as spcified and directed. 9.00 M&L RCC (Nominal mix ) Type B1 (1:2:4 20 mm graded stone agg) as in roof slabs, floor slab, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. 10.00 M&L RCC (Nominal mix) type B-0 1:2:4 (12.5mm gareded stone agg )as in beams, lintels over 1.5m span complete all as specified and directed. 11.00 M&L RCC (Nominal mix ) Type B1(1:2:4) (20 mm graded stone aggregate) as in fdn footing, fdn beams, plinth beams, bases for columns,complete all as specified and directed. 12.00 M&L RCC (Nominal mix ) using type B1 1:2:4 (20 mm graded stone aggregate) as in columns pillars, piers, posts and struts ,complete all as specified and directed. 13.00 M&L for non skid jointless coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 but n exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & Including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed. 14.00 S&F, Glazed ceramic tiles Coloured (Size 350x250/450x350 6 to 7mm thick) in wall/dado etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including10mm thick backing coat in Cement Moartar 1:4 complete all as specified and directed. 15.00 M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking, biniding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. 16.00 M&L for mild steel TMT bars upto 8mm dia and over cut to length, bent to shape required including cranking, biniding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. 17.00 M&L for 5mm thick rendering of ready mix mortar of approved make on ceiling surface, finish the surface even and smooth without using extra cement etc complete all as specified and directed. 18.00 M&L for preparing surfaces of newly plastered and applying three coats of white wash on ceiling complete all as specified and directed. 19.00 M&L for 15mm thick rendering of ready mix mortar of approved make on wall surface, finish the surface even and smooth without using extra cement etc complete all as specified and directed. 20.00 M&L preparation of surfaces and applying two coats of cement base paint over a coat of primer on external surfaces of walls complete all as specified and directed. 21.00 Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm using excavated soil complete all as specified and directed. 22.00 Removing of excavated soil up to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 M above the starting point or out of MOD land complete all as specified and directed. 23.00 M&L,Moorum/red bajari filling in floors laid in layers n exc 15cm thick, spread, levelled and rammed including watering. 24.00 M&L Hardcore of gauge n exc. 63 mm, Broken stone or boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specfied and directed. 25.00 M&L 75mm thick PCC (1:3:6) type C2 (using 20mm stone aggregate) as in floors/pavings /plinth protection etc, finished even and fair with using extra cement grooves filled with bitumen mastic filling of mix (1:2) (bitumen and sand) complete all as specified and directed. 26.00 M&L 100mm thick cement concerete 1:4:8 type D-2 (using 40mm graded aggragete) as in sub base including finished even and smooth without using extra cement complete all as specified and directed. 27.00 S&F 500 ltrs capacity rotational molded polyethylene water storage tanks three layered (cylindrical vertical with closed top) hoisted and fixed in position and including 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & 20mm dia tank nipple suitable for HDPE water tank, complete all as specified and directed. 28.00 M&L tubes 15mm bore medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. 29.00 M&L tubes 20 mm bore medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. 30.00 S&F WHB (550x400mm) vitreous china or approved colour fixing to granite slab including 32 mm dia chromium plated waste coupling, PVC waste pipe and cutting for pinning in ends of brackets in wall etc complete all as specified and directed. 31.00 S & F Vitreous china urinal, full stall type, white (including, flush pipe and waste pipe) complete all as spcified and directed. 32.00 S&F 10 Ltrs capacity PVC low level flushing cistern complete with syphone handle lever including connecting to WC and fixing on walls with rawl plug, screws and including PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed 33.00 S&F vitreous padestal pattern (European type) water closet pan white with cast iron P or S trap including provn of fixing bolt and plastic seat cover heavy duty with hinging device including 32mm dia flush pipe including provn of jet complete all as specified and directed 34.00 S&F 15mm bore long body bib tap with wall flange fancy type CP brass high pressure screwed for iron pipe and fixed etc.complete all as spcified and directed. 35.00 S&F 15 mm bore CP brass fancy type stop valve / angle valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as spcified and directed. 36.00 S&F 75mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. 37.00 M&L for precast cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) for Man hole cover slab shelves, cooking plateform & similar articles with plain faces & set in cement mortar 1:6 complete all as specified and directed. 38.00 S&F 100 mm bore sand cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls floor complete all as specified and directed. 39.00 S&F 100 mm CI bends (any radius) diminishing pieces or taper (large bore measured) complete all as spcified and directed. 40.00 S&F 100mm branch pieces,single (equal or unequal) ordinary or inverted (spigot or socket type) fitted with oval acess door or with parallel branches for complete all as specified and directed. 41.00 S&F stack clamps out of 50mm by 5 mm flat iron & 16mm dia mild steel iron stay incl bolt & nuts & securing ends of stays to walls for 100mm pipe complete all as spcified and directed. 42.00 S&F cast iron cowl for 100mm pipe complete all as specified and directed. 43.00 S&F in opening Solid PVC door frame (Factory made) of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as per specification and as per drawing on Sl page 150 of SSR (Part II) complete all as specified and directed. 44.00 S & F Solid panel PVC door shutter (Factory made) 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded prelam PVC sheet having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail, bottom rail on either side & as gap insert for top rail & bottom rail, panelling of Prelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement and provision of partially louvred frames, Supply & Fixing in the frame at site, complete all as per specifications & as per drawing on Sl page 146 of SSR (Part-II) complete all as specified and directed. 45.00 S&F 150 mm long aluminium anodised barrel tower bolt, extruded section, complete all as specified and directed. 46.00 S&F 100mm long extruded aluminium alloy handles, febricated typed, anodised complete all as specified and directed. 47.00 S&F 100 mm long (size) butt hinges, stainless steel complete all as specified and directed. 48.00 S&F 20mm bore gun matel globe or gate valves with iron wheel, screwed both ends for iron pipes fixed complete in all respect as specified 49.00 S&F PVC connection 15mm dia and 45cm long with PTMT nuts washers complete all as specified and directed. 50.00 M&L for 150mm nominal size (DWCPE) Double wall corrugated polyethylene pipe (SN8) including all fixing accessories or fittings like socket/spigot joint with elastomeric sealing ring, rubber ring, SILAID rubber lubricants required for laying of pipes, laid in trenches including haunching, complete all as specified and directed. 51.00 M&L cement concrete type C-2 1:3:6 (using 40mm graded stone aggregate) in bed of drain pipe 150mm bore pipe including forming cradles complete all as specified and directed. 52.00 M & L for cutting the existing GI tube pipe any size upto 25mm for insertation of new Tee branches, reducers in any position of 15 mm dia pipe line Including all fittings fixtures etc complete all as specified and directed. 53.00 Supply and fix electric water heater, vertical type storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated, inner tank material of superior glass lined tank and outer body material ABS with high pressure with standing capacity upto 8 bar pressure having adjustable knob for temprature control complete with all accessories as per IS safety Norms , including SS braided hose connection pipe set of two of required length for each geyser complete all as specified and directed. 54.00 M&L for power point wiring In PVC Casing Caping/PVC Conduit Pipe with two run insulated stranded copper conductor cable 4 Sqmm single core and PVC insulated FRLS 1100 Volts unsheathed copper conductor 4 Sqmm S/C as earth wire connected to dolly metal clad box complete as specified and directed. 55.00 S & F sheet metal enclosure with metal clad socket and with plug top 20 A capacity and with MCB double pole 20A Suitable for mounting on wall surface or concealed in wall as per site requirements complete all as specified and directed. 56.00 S&F tubes, medium grade, galvanised, with all fitting; for fixing on wall complete of bore 15mm dia with complete fitting and fixture complete all as specified and directed by Engr-in-charge. 57.00 S&F stop valves 15 mm bore CP With crutch or butterfly handle, screwed both ends for iron pipe or unions, complete all as spcified and directed. 58.00 S&F Bib taps, cromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for cp ferrule and fixed of cap 15mm dia complete all as spcified and directed. 59.00 Supply, laying and drawing of submain wiring in and including 20 mm dia concealed PVC rigid conduits including cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6.0 sqmm (as earth wire) of multistranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 1990 complete including connection all as specified and directed. (From AC box to DB) 60.00 M&L concealed point wiring with PVC insulated unsheathed multistranded colour code copper conductor in PVC conduit with FRLS cable 1.5 sqmm size 1100 volts grade conforming to IS:694 in box of 1.6mm thick including one coat of synthetic enemelled black paint and providing with brass screws and cup washers including single core multi stranded FRLS copper conductor 1.5 sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit all as specified and directed by Engr-in-charge for the following :- 61.00 (a) One light/fan/bell point controlled by one way switch 5/6 amps. 62.00 (b) One 3 pin 5/6 amps socket outlet point controlled by one way switch on independent board. 63.00 (c) One 3 pin 5/6 amps socket outlet point controlled by one way switch on same board. 64.00 M&L for concealed point wiring with PVC insulated unsheathed multistranded FRLS copper conductor in PVC conduit with cable 2.5 sqmm size 1100 volts grade conforming to IS:694 in new metal flush box of 1.6mm thick including one coat of synthetic enemelled black paint with new modular white cover plate frame of suitable size of required colour fixed with brass screws and cup washers including single core multi stranded FRLS copper conductor 2.5 sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit for One 3 pin socket 15/16 amps on independent board complete all as spcified and directed.(cost of chiesling/cutting of existing surface and making good to match with the existing surface is deemed to be included in the rates) 65.00 S&F of switch piano type 5/6 amps single pole one way complete all as specified and directed. 66.00 S&F of switch piano type 15/16 amps single pole one way complete all as specified and directed. 67.00 S&F of socket outlet multipurpose 2/3 pin 5/6 amps flush button type complete all as specified and directed. 68.00 S&F of socket outlet multipurpose 2 in 1, 5/6 and 15/16 amps complete all as specified and directed. 69.00 Supply and fix exhaust fan metallic type ventilating single phase 230/240 V Of 300 mm sweep with louvre including cutting of holes in a round shape and including fixing the ventilating fan complete all as directed and specified. 70.00 S&F of factory made epoxy polyester powder coated distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for above DB all as specified and directed.NOTE (a) MCBs shall be measured and paid separately.(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of BOQ. 71.00 S&F of single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 complete all as specified and directed. 72.00 S&F of SPN MCB 32 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity, complete all as specified and directed. 73.00 Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.complete all as specified and directed. 74.00 Supply and fixing LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size including taking down of existing/old tube light fitting complete all as specified and directed. 75.00 Supply and fixing LED building security light fitting 35 watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. 76.00 S&F ceiling rose 3 phase/PVC/polycarbonate isolated body complete all as specified and directed. 77.00 M&L for cutting of existing water supply main any size upto 25mm dia for taking branch connection of size 15mm including insertion of Tee unequal as required at site complete all as specified and directed. 78.00 Supply, laying, testing and commissioning of XLPE insulated armoured heavy duty electric cable with aluminium stranded copper conductor 1100 volt grade cross sectional area 10 sqmm 2 core LT cable complete all as specified and directed. 79.00 M&L far Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, burieddirectly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate not lessthan 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed.
