Tender For Supply Of Materials For Anganwadi Construction-Udayanapuramgp, Kottayam-Kerala

Tender For Supply Of Materials for Anganwadi construction-UdayanapuramGP- 1 Materials for Road Concreting 2 Stone Aggregate(single size): 40 mm nominal size 3 Stone Aggregate(single size):20 mm nominal size 4 Coarse sand (zone III) 5 Portland Cement 6 Stone Aggregate(single size): 10 mm nominal size 7 Twisted steel/deformed bars 8 Solid blocks of size 30x20x20cm 9 Royalty for good earth 10 Common burnt clay F.P.S. (non modular) bricks class designation 7.5 11 wall form panel 1250x500 mm 12 Corner angle 45x45x5 mm 1.50 m long 13 100 mm channel shoulder 2.5 m long 14 Double clip (bridge clip) 15 Single clip 16 M.S. Tube 40 mm dia 17 Structural steel such as tees, angles, channels and R.S. joists 18 Red oxide Zinc chromate primer 19 Adjustable span ESO+SI (2.35-3.40) 20 Adjustable telescopic prop 3 m (2.02-3.75m) 21 Beam clamp 300-380 mm (450-1070 mm) 22 Second class kail wood in planks 23 Second class kail wood in scantling 24 Hollock ballies 125 mm diameter 25 Welding by electric plant 26 Water proof ply 12 mm thick 27 Bolts and nuts up to 300 mm in length 28 Average rate of mild steel round bars for reinforcements 29 Anjili wood scantls 30 Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm 31 Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm 32 Bright finished or black enameled mild steel screws 40 mm 33 Bright finished or black enameled mild steel screws 20 mm 34 Anjili wood planks 35 Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) 36 Mild Steel round bar above 12 mm dia 37 Flats up to 10 mm in thickness 38 Rawl plug 50 mm (designation 10 nos) 39 Anodised Aluminium tower bolt (barrel type) 200x10 mm 40 Chromium plated Brass screws 30 mm 41 Anodised Aluminium handles 125 mm with plate 175 x 32 mm 42 Chromium plated Brass screws 25 mm 43 Brass 100 mm mortice latch and lock with 6 levers without pair of handles 44 Pair Anodised Aluminium lever handles for 100 mm mortice latch and lock 45 35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished) 46 Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm 47 Fine sand (zone IV) 48 Acrylic exterior paint 49 Exterior primer 50 water proofing cement paint 51 Pink primer (for wood) 52 Synthetic enamel paint in black or chocolate shade 53 Black Japan 54 Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black 55 Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades designs except White, Ivory, Fume Red Brown etc. 56 Vitrified floor tile 60x60 cm 57 High polymer modified quickset tile adhesive 58 Vitreous China flat back wash basin 630x450 mm 59 15 mm C.P.brass tap 60 C.P. brass waste 32 mm 61 C.I. bracket for wash basin and sinks 62 Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm 63 Vitreous China orrisa type w.c. pan size 580 mm 64 Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings 65 Polyethylene water storage tank with cover and suitable locking arrangemnet 66 PVC pipe 25 mm outer dia. 10kgf cm2 67 PVC pipe 32 mm outer dia 6Kgf/cm2 68 PVC pipe 63 mm outer dia. 4 kgf/cm2 69 PVC pipe 110 mm outer dia. 4kgf/cm2 70 PVC Elbow 63 mm dia 71 PVC vent cowl 63 mm dia 72 Stone for masonry work 73 Stone Aggregate(single size): 06 mm nominal size 74 Interlocking C.C. paver block (60 mm thick, M-30)

INR 2950 /-

INR 27645.0 /-

INR 11.05 Lakhs /-