Tender For Inverted Fluorescent Microscope, Chennai-Tamil Nadu

Tender For Inverted Fluorescent Microscope; 1 Observation methods for the applications of Bright Field, Phase Contrast, Fluorescence & future DIC upgrade. 2 Microscope main body with the Camera port, Analyser Slot, Anti-Vibration dampers & drip-proof decision to prevent the water intrusion into the body. Coarse motion with torque ring and refocussing with refocus lever and fine stroke 0.1mm per rotation and find focus with minimum 1 µm per step. 3 Sextuple DIC nosepiece with slot for analyser. 4 Built in high intensity LED with 10,000 hours lifetime and built-in fly eye lens and the illumination pillar can be angled 25® degrees back side for the easy replacing the specimens. 5 Fluorescence illuminator with shutter to block the stray light of autofluorescence from the transmitted light. Four Fluorescence LED units built-in fly-eye-lens and Interlocked mechanism for the fluorescence filter cubes. Built-in noise terminator mechanism filter turret assembly (4 slots) can be output via TTL signal. Memorize each LED intensity until the microscope is switched off. 6 Eyepiece tube inclination angle 35®-degree, field number 22/23mm, Siedentop type pupil adjustment range 50-75mm. Light path selection observation/ imaging 100:0 / 20:80. Eyepiece 10mm with Field number 22/23mm with Diopter adjustments on both the eyepieces. 7 Rectangular Stage with stage handle can be mounted on right side. Stage size 290 x 300 mm Cross travel: 114(X) x 75 (Y) mm. Individual holders for 35mm Petri dish Holder 35mm, Slide glass, terasaki plate holder and 96 Well Clamper. 8 Condenser LWD lens N A 0.5 NA turret, mount up to 7 slots for the various observation like Bright Field, Phase Contrast, DIC application. LWD phase module 1. 9 Fluorescence Filter cubes with noise terminator mechanism of DAPI, FITC/GFP, TRITC with the Individual LED sourced illuminations for the Fluorescence applications. 385 LED Unit (Each LED Lifetime of 10,000 Hours), 470 LED Unit (Each LED Lifetime of 10,000 Hours), 525 LED Unit (Each LED Lifetime of 10,000 Hours). 10 Enhanced phase contrast objectives of 10X N.A. 0.25, W.D. 6.2 mm, Ph1, LWD ADL 20X N.A. 0.40, W.D. 3.1 mm, Ph1 1, 40x N A 0.55, W.D 2.10mm, Ph1 and Plan Fluorite ELWD 40XC, N.A. 0.60, W.D 3.60-2.80mm. 11 Digital colour camera with 1/1.8’’ CMOS 5.5million pixel or more resolution, Pixel Size - 2.4µm x 2.4µm. Quantum efficiency 65% or more. Live display mode, 12.0 frames/sec. at full resolution, max 30 frame per /sec. at ROI mode through binning/pixel averaging mode, USB3.0 port for attaching camera to desktop/ through single wire with 0.7X C-mount camera adapter. 12 Image Analysis Research Software acquisition and device control up to three-dimensional image Measurement acquisition (Interactive measurement) & image annotation 3D capability • Image Acquisition • AVI live-stream (video recording) capture Live Image capture • Time Lapse Imaging Z stack Annotations Large format • Macro Report Generator • Vector layer multiDimensional • File format. Other Conditions 13 Warranty : 1 year 14 Microscope, Camera & Software Should Be from Same Manufacturer for Better Compatibility, Integration / Upgradation.

Refer document

INR 44000.0 /-

Refer document