Tender For Installation Of Deep Borewell At Bsf Campus Dhanakgre Under Shq Bsf Shillong (Sh: Providing And Fixing Submersible Motor, Starter Control Panel And Accessories) ; 1 Supplying and fixing 7.5 HP/ 5.6 KW, Vertical type submersible motor pump set for 3 phase, 440 volts, 50 Hz, AC in bore well, having specification : Delivery 50 mm dia, Stage-40, discharge range 87- 177 LPM head range 72-228Mtrs. (make: Texmo- Model HRF19/40). 2 Supplying of 7.5 HP/ 5.6 KW, Vertical type submersible motor pump set for 3 phase, 440 volts, 50 Hz, AC in bore well, having specification : Delivery 50 mm dia, Stage-40, discharge range 87- 177 LPM head range 72-228Mtrs. (make: Texmo- Model HRF19/40).(Spare Motor) 3 Supplying & Fixing of three phase motor controller with single phase preventer and complete, as required for 440 volts,3 Phase, 50 Hz, 7.5 HP/5.5 KW submersible motor pump. Make : L&T MU-G10 DOL 4 Supplying of three phase motor controller with single phase preventer and complete, as required for 440 volts,3 Phase, 50 Hz, 7.5 HP/5.5 KW verticalsubmersible motor pump. Make : L&T MU-G10 DOL 5 supplying and fixing of 25 mm size of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in casr of recessed conduit as required . 6 Supplying and drawing of 6 sq.mmFlat three Core PVC Insulated & PVC Sheathed Industrial copper cable for Submersible Pump Motors, 1100 Volt, conforming to IS 694 in the existing PVC conduit/ in bore well along the HDPE/ fixing on wall by suitable size of PVC saddles as required. 7 SITC of outdoor joint box having dust and weather /vermin proof compartmentalized, totally enclosed and multiple door type (For STarter control panel & 100 AMp MCCB) made out of 2 mm thick CRC sheet required hardware duly treated for degusting in 7 tank process with de-phosphate and with powder coating on both side of panel in desired shade. (Only outer area on all side shall be measured & panel to be fabricated from CPRI approved fabricator). Outdoor joint box having size 1000 x 900 x 450 mm depth along with TPN aluminium bus bar of 100 A capacity duly painted locking arrangement complete with 600mm long legs, 300mm in the ground. Load bearing structure shall be of 2.0 mm thick sheet supported stand made by angle iron (50x50x6mm) size (0.6x2.0x0.6) Mtrs. i/c cable connection andetc as required as approved by Engg in-charge. The panel shall be mounted on suitable brick / cement concrete foundation 30 cms. Below ground level and 30 cms. Above ground including finishing and supplying and fixing following component/accessories & switch gears etc complete as required. 8 Supplying and Laying of aluminium conductor, XLPE Insulated, PVC Innersheathed, armoured power cable of 1.1 KV grade of 3.5×35 sq. mmsize direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.(Make Havells/Polycab /Universal/CCI/ Plaza/RRKable) 9 Supplying and fixing of 40 mm dia uPVC column pipes (medium duty) in a existing borewell along with all necessary accessories etc as required as per site requirement. 10 Supplying & fixing of 25 mm thick poly virgin braided twist cord twin rope in a existing borewell to support 7.5 HP vertical submersible motor 11 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. 12 Supplying & fixing of 7.5 HP/ 5.6 KW, open well submersible motor pump set for 3 phase, 440 volts, 50 Hz, AC, having specification : suction 75 and Delivery 65 mm dia, discharge range 520- 1440 LPM head range 10-36Mtrs. (make: Texmo- Model ASM 10). For Sump well 13 Supplying of 7.5 HP/ 5.6 KW, open well submersible motor pump set for 3 phase, 440 volts, 50 Hz, AC, having specification : suction 75 and Delivery 65 mm dia, discharge range 520- 1440 LPM head range 10-36Mtrs. (make: Texmo- Model ASM 10). For Sump well 14 Supplying of45 Watt rating LED street light luminaire, out door type with pressure die cast aluminium housing with heat resistant glass, IP66 protection, suitable for single phase, 50 Hz AC.
