|
| 1 | \"Notes: (i) Please refer Schedule \"A\" Notes of tender documents. |
| 2 | Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified and directed. |
| 3 | Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed. |
| 4 | Demolition of Reinforced cement concrete of any description and RCC copings etc and removal of debris outside the defence land complete all as specified and directed.. |
| 5 | Demolition of cement concrete of any description and in any position, louvres, jallies & framework etc complete all as specified and directed. |
| 6 | M&L Brick work with sub class \"B\" bricks straight or curved on plan exceeding 6m mean raidus bulit in Cement Mortar 1:6 complete all as specified and directed. |
| 7 | M&L Brick work with oldbricks retrived from dismantling straight or curved on plan exceeding 6m mean raidus bulit in C:M 1:6 including cleaning of old bricks from existing cement mortar etc complete all as specified and directed. |
| 8 | M&L for cement plastering 15mm thick in two layers in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer\"s instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra cementcomplete all as specified and directed.Note : WPC will be measured and paid separately. |
| 9 | Supply only integral liquid water proofing compound complete all as specified and directed. |
| 10 | M&L for RCC (1:2:4) type B-0 using 12.5mm graded mechanically crusted stone aggregate as in, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 11 | Formwork of rough finished flat surfaces to sides and soffits of RCC/PCC copings/RCC/PCC bands in walls, horizontal or sloping, and similar work complete all as specified and directed. |
| 12 | S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding witgh and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 13 | S&F mild steel TMT bars 5mm dia and over upto and including 10mm diain stirrups, spacers and binders, cut to length, bent to shape required, including bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 14 | M&L for 40mm thick Damp Proof Course (DPC) of PCC (1:2:4) type B-0 using 12.5mm graded mechanically crusted stone aggregate to horizontal or vertical surfaces including necessary formwork complete all as specified and directed. |
| 15 | S&F 400 micron thick HDPE sheet (Virgin Quality) water proof, wrinkle free without puncture having minimum weight 390 gm/Sqm transparent/ white colour complete all as specified and directed. |
| 16 | M&L for precast cement concrete louvres and jallies, 40 mm thick (measured solid), (1:2:4) type B-0 using 12.5mm graded mechanically crusted stone aggregate set in Cement Mortar 1:4 including all mouldings but excluding frame complete all as specified and directed.Note: Pre cast frame shall be measured separately and paid for under respective item. |
| 17 | M&L for precast cement concrete as in frame work for louvres and jallies, 100x100mm and 760mm high, (1:2:4) type B-0 using 12.5mm graded mechanically crusted stone aggregate set in Cement Mortar 1:4 including all mouldings complete all as specified and directed. |
| 18 | Dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed. |
| 19 | M&L for Granite (Jet Black colour/shade-South Indian) of any type machine cut as in flooring shelves/steps/counter tops/gate pillars etc, 18-20 mm thick, set and jointed in cement slurry over & including screed bed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab or with suitable adhesive for fixing on unpolished kota stone slabs and including rubbing, cutting and mirror type polishing and bull nose on exposed sides complete all as specified and directed.Note : Single piece should be used in steps/cills/jambs/shelves/gate pillars. |
| 20 | M&L for preparation of surfaces of external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc and applying two coat of cement base paint with highlighter of any approved shade @ 5 sq.m/kg/1 coat by using following brands of cement based paint by brush or roller complete all as specified & as directed. |
| 21 | Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in PCC/RCC of any size/description including taking out embedded portion and making good disturbed ground complete all as specified. |
| 22 | Dismantling old fencing wire/barbed wire of any description/size as in fencing from posts/struts/pillars complete all as specified and directed. |
| 23 | Taking down existing steel gates of area of each leaf exc 5 sq.m but n. exc. 10 sq.m with hold fasts as directed and refixing in the new position including making holes for hold fasts in RCC/brick work and filling the same with PCC 1:2:4 after fixing the holdfasts including minor repair/welding etc complete all as specified and directed. |
| 24 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, in soft/loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, including removal for surplus/excavated soil to a distance n.exc. 50 mtrs complete all as specified and directed. |
| 25 | M&L for PCC 1:3:6 using using 20mm graded stone aggregates as in post holes etc complete all as specified and directed. |
| 26 | S&F Mild steel work of Fe-290 Gde E-165 as in(Security fencing) fencing posts , drilling holes, notching for wire etc inl. Cutting and twisting necessary drilling, bolting and riveting or welding etc and similar works complete all as specified and directed. |
| 27 | M&L for Mild steel round bars 10mm dia and over, cut to length, bent to shape required, includingbending hooks/ens as directed by Engineer incharge or welding for overlaps as in ties for fencing etc, confirming to FE-410 W (Grade E-250) quality \"A\" or Fe -290 (grade E-165) complete all as specified and as directed. |
| 28 | Supply only chain link MS galvanised fencing square mesh of size/nominal pitch of wires 100x100mm, dia of wire-4mm complete all as specified and directed. |
| 29 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. |
| 30 | Galvanised 2 strand steel barbed wire 2.24 mm dia with 2 mm dia barbs at 75 mm spacing and string and fixing to mild steel fencing posts any type of standard rails, straining bolts including securing or tying at cross wings with and provision of galvanized mild steel wire staples or steel wire pins complete all as specified and directed. |
| 31 | Restraining resecuring including making good staples etc of galvanized, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of posts, straining bolts,standard bolt, including securing or tying at crossing with and including provision of galvanized mild steel wire staples or steel pins, etc complete all as specified and directed.Note: Each line of wire to be measured for the purpose of payment. |
| 32 | M&L for preparation of wood and wood based material, steel and iron workof any description for treating ends of posts, backs of chowkats, etc., area tarred exc 0.1 sq. m but n exc 0.5 sq. m each, and treated with tar or coal or black paint complete allas specified and as directed. |
| 33 | M&L for preparing steel and iron surfaces of any description including purlins/ rafters/ trusses/ columns/ struts etc and the like works n.exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 34 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, 5 cm long, dia of shank 12mm complete all as specified and directed. |
| 35 | S&F Polycarbonate sheet of min weight 1.65 Kg/sq.m as in roof covering/cladding to wall of approved make, colour and profile, fixed with self tapping screws including dismantling the old u/s fiber sheet of any thickness complete all as specified and directed. |
| 36 | Dismantling wrought iron or mild steel work of any description any position complete all as specified and directed. |
| 37 | S&F MS hollow rectangular/square/circular tubes/pipes of YST 310 Grade as in frame work for Framed work as in doors or gates/ roofs/ rafters/ purlins/ chajjas/ trusses/ columns/ struts etc and like similar items etc.complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete and similar work complete all as specified and directed. |
| 38 | S&F Mild steel, plain, black sheet in in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. |
| 39 | Demolition of cement concreteun -reinforced in ground floors/FF and pavings n.exc 15cm thicknesscomplete all as specified and directed. |
| 40 | Dismantling of cement concrete tiles/ paver blocksof any description as in floorings, paths etc., laid dry, laid flat complete all as specified and as directed. |
| 41 | Scarifying or picking gravelled, macadamor bituminous macadam surfaces n. exc. 50mm deep in area exc 400 sqm complete all as specified and directed. |
| 42 | M&L for 100mm thick cement concrete work 1:4:8type D-2 in sub-case to flooring etc complete all as specified and directed. |
| 43 | M&L Machine pressed rubber moulded ISI marked precast cement concrete interlocking paver block any shape and size and of colour 50% red coloured tiles and 50% grey coloured tiles confirming to IS-15658-2006 of 60mm thickness M-35 Grade and including filling of interstices with fine sand over including 25mm thick layer of sand chusion complete all as specified and directed. |
| 44 | M&L Machine pressed rubber moulded ISI marked precast cement concrete interlocking paver block any shape and size and of colour 50% red coloured tiles and 50% grey coloured tiles confirming to IS-15658-2006 of 80mm thickness M-40 Grade and including filling of interstices with fine sand over including 25mm thick layer of sand chusion complete all as specified and directed. |
| 45 | Description all as per above two items here-in-before but except tiles/ paver blocks of any thickness/ shape i.e., using old serviceable tiles/ paver blocks retrieved dismantling of paver blocks here-in-before and including filling of interstices with fine sand over including 25mm thick layer of sand chusion complete all as specified and directed. |
| 46 | M & L for factory made rubber moulded pre-cast cement concrete type B1 1:2:4 (20 mm graded aggregate) in CM 1:4 in Kerb stone use with plain fair faces, including chamfers, weatherings,throating etc. and setting in mortar complete with joints to match including embedding in the ground to depths indicated and tamping ground around and also for removing any surplus spoil to a distance n. exc. 50 mtrs complete all as specified and directed. |
| 47 | M&L cementconcrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in benching coping etc complete all as specified and directed. |
| 48 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of 300 to 600 mm bore complete all as specified and directed. |
| 49 | M&L for 450mm bore Reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and directed. |
| 50 | M&L for 600mm bore Reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and directed. |
| 51 | Concrete bed to drain pipes with cement concrete 1:3:6 using 40mm raded stone aggregates including packing under and completely surrounding pipes with concrete after they are laid and tested in complete all as specified and directed. |
| 52 | S&F in replacement of safety lever locks, mild steel with 4 levers for rolling shutters of standard quality as approved by GE complete all as specified and directed. |
| 53 | Supply and fixing in repairs Ball bearingfor rolling shutters complete all as specified and as directed. |
| 54 | Replacement of unserviceable spring of rolling shutter with new helical wire spring or flat spiral spring of 8 SWG wire and length not less than 40cm and up to 60cm or as per existing one at site ,applying twc coats of dynthetic enamel paint to match with existing surface complete including taking down existng one complete all as specified and directed. |
| 55 | Supply and fixinggear box with handle duly painted with standard accessoriesincluding vertical rod of any dia and size same as existing at site including taking down existing one and making shutter functional complete all as specified and directed. |
| 56 | Replacement of existing unserviceable steel pipe shaft of 40mm dia, MS pipe medium grade including welding, drilling for securing springs with bolts, nuts etc complete all as specified and directed. |
| 57 | Opening out existing gear box and moving mechanism for setting right the gear box wheels, vertical rod welding (where required), replacement of worn out nuts, bolts bushes, complete oiling and greasing, set in smooth working condition and refixing the same including making good the disturbed portion of structure to match with existing one complete all as specified and directed. |
| 58 | Taking down gear operated rolling shutter of any size and of any thickness of lath including steel cover, springs, ballbearings ,shafts, gear box and guide channel etc and re-fixing the same after repair, greasing the guide channel and gear box to make smooth functioning of the shutter including making good the disturbedportion of structure to match with the existing one and painting complete all as specified and directed.Note: Replacement of parts shall be measured and paid for separately. |
| 59 | Taking down without gear operated rolling shutter of any size and ofany thickness of lath including steel cover, springs, ballbearings ,shafts, gear box and guide channel etc and re-fixing the same after repair, greasing the guide channel and gear box to make smooth functioning of the shutter including making good the disturbedportion of structure to match with the existing one and painting complete all as specified and directed.Note: Replacement of parts shall be measured and paid for separately. |
| 60 | Taking down old damaged / rusted lath and Fixing new lath (thickness of sheet/ laths 1.25 mm and curtain inter locking curl 75 to 85 width of each trip of each strip) and & bottom rail for rolling shutter made to shape and size as per existing one, FI strip, hold fasts comlete including riveting or welding as requiredand errectingwith existing accessories like guide channel, gear operated type including gear box, ball earings with chain wheel and hand chain incl top cover anchoring rod, hash and staple and one shop coat of primer erected in position to make shutter functional making good the disturbed surfaces of walls/pillars in cement and sand mortar 1:4 and PCC 1:2:4 type B-1 for hold fasts etc, complete all as specified and directed.Note: Size of new lath will be measured for payment. |
| 61 | Taking down old damaged / rusted lath and Fixing new lath (thickness of sheet/ laths 1 mm and curtain inter locking curl 75 to 85 width of each trip of each strip) and & bottom rail for rolling shutter made to shape and size as per existing one , FI strip,hold fasts comlete including riveting or welding as requiredand errectingwith existing accessories like guide channel ,gear operated type including gear box, ball earings with chain wheel and hand chain incl top cover anchoring rod, hash and staple and one shop coat of primer erected in position to make shutter functional making good the disturbed surfaces of walls/pillars in cement and sand mortar 1:4 and PCC 1:2:4 type B-1 for hold fasts etc, complete all as specified and directed.Note: Size of new lath will be measured. |
| 62 | M&L for efflorescence treatement to wall surface by applying two layer of fastflex Dr. fixit (Pidilite co.) over brick surface after taking down plaster from brick work and finally apply 15 mm thick plastering with mixing of (URP 301) over treated surfaces (note- (i) taking down plaster and applying of 15mm thick plaster will be measured separately) (note i after taking down plastering, uneven/brick joint surfaces will be repaired with cement mortar in 1.3 with mixing of WPC URP 301 complete all as specified and directed. |
