Tender For providing Of Certain Lbw And Minor Work Under Ge Dipatoli--1 M&L brick work with fly ash bricks straight or curved on plan exc 6 mtr mean radius built in cm (1:6) complete as specified and directed. 2 M&L cement concrete as in plinth type C-1,1:3:6 using 20mm graded stone aggregate complete as specified and directed. 3 M & L for rendering 5 mm thick in cement Mortar (1:3) on the surfaces of ceiliing and finished the surface fair and even complete as specified and directed. 4 M&L for rendering 15 mm thick in CM 1:4 on any faces brick work including finishing the surface fair and smooth without using extra cement with mixing of water proofing compound (qty as per manufacturer instructions) complete all as specified and directed. 5 M/L preparation of newly plastered surfaces of wall/ ceiling and applying a coat of wall care putty 1 mm thick to make the surfaces truly smooth complete all as specified. 6 M&L for applying two coats of oil bound distemper over one coat of chalk whiting on plastered surfaces of wall, preparatory to distempering including preparation of newly plastered surface complete all as specified and directed. 7 M&L for applying two coats of oil bound distemper over one coat of primer on plastered surfaces of ceiling, preparatory to distempering including preparation of newly plastered surface complete all as specified and directed. 8 M&L for coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm to 450X 350X 7mm thick including over10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces all as specified and directed 9 M&L non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles n.exc 0.18 sqm as in floor etc, with and including over 15 mm thick screed bed in CM(1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and as directed. 10 S&F vitreous china wash basin, white flat back size 630x450mm (excluding taps, incl.CP waste coupling & PVC waste pipe and brackets) complete as specified and directed. 11 Cutting chases in brickwall pinning in making good to facings where required and pointing in cement mortar 1:3 to ends and cutting chases for concealed water tubing and making good cutting n.exc. 10 cm girth complete as specified and directed. 12 S&F angle valve / stop valve , cast copper alloy fancy type chromium plated with long shank and cup screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore complete as specified and directed. 13 S&F 500 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixed. 14 S&F PVC Connections 15mm size and 450mm length complete as specified and directed. 15 S&F 110mm PVC (SWR) branch pieces, single equal or unequall complete as specified and directed. 16 S&F 110mm PVC (SWR) Bends any radius complete as specified and directed. 17 S&F 110mm PVC(SWR) vent cowls complete as specified and directed. 18 S&F110mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete as specified and directed. 19 M&L for 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints,laid in trenches or in floors or wall complete all as specified & directed. 20 M&L PVC (SWR) bend any radius 75mm dia complete as specified and directed. 21 Use and waist form work to soffits of suspended slabs such as roof slabs, floor slabs n.exc.200mm thick in rough finished surfaces etc complete as specified and directed. 22 S & F Powder coated aluminium ventilator louvre type with frame, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, side handles fixed to wall with fastener etc, complete all as specified and as directed. 23 Framed work such as grills, grating doors or gates etc. of angle iron, flat iron with ends of bars shouldered and or rivetted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings for terrace, framework of water tanks and similar work confirming to Fe 290 complete as specified and directed. 24 M&L for preparetion of new steel surfaces and applying two coats of synthetic enamel paints over a coat of primar with red oxide on new steel surfaces over 10cm width or girth complete as specified and directed. 25 M&L Brass Chromium plated shower rose 125mm size with or without swivel joints any size including fixing to steel pipe or union incl shower complete as specified and directed. 26 M&L Ball brass valves, high pressure, with polythene float and flunut complete, screwed for iron pipe or brass ferrule and fixed 20mm bore complete as specified and directed. 27 S&F 32mm waste fittings brass chromimum plated for basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete as specified and directed. 28 S&F stop valves, 20mm bore dia of pipe cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete as specified and directed. 29 S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete as specified and directed. 30 M&L PCC (1:4:8) type D-2 using 40mm graded stone agg as in fdn filling mass concrete complete as specified and directed. 31 Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed. 32 M&L brick work using sub class B brick curved or straight on plan exc 6 mtr mean radius built in cm (1:6) complete as specified and directed. 33 Brick work with Sub-Class B bricks, straight or curved on plan to any radius in half brick thick walls built in (1:4) cm complete as specified and directed. 34 M&L 15mm thick plastering on wall concrete surfaces in cm (1:6) finished even and smooth w/o using extra cement complete as specified and directed. 35 M&L cement concrete 75mm thick as in sub base of floor type C2,1:3:6 using 40mm graded stone aggregate complete as specified and directed. 36 M&L Cement concrete in floors 40mm thick over sub base (1:2:4) using 20mm graded aggregate finished even and smooth without using extra cement complete as specified and directed. 37 Returning/filling in layer nexc 25 cm thick including spreading, levelling watering well ramming etc complete as specified and directed. 38 Removing excavated soil to distance nexc 50 mtr and deposited complete all as specified and directed. 39 Supply only integral water proofing compound complete as specified and directed. 40 M&L hard core of gauge nexc 63 mm of broken stone or boulders deposited spread and leveled in layers n . exc 15cm thick, watered and rammed to a true surface complete as specified and directed. 41 M&L preparation of newly plastered surfaces and applying 3 coats of white wash on ceiling complete as specified and directed. 42 All as per item No 41 above but on wall complete as specified and directed. 43 M&L preparing new surface on walls and applying 2 coats of cement based paint over one coat of primer on external walls complete as specified and directed. 44 S & F PVC door chowkhats of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supply & fixing in opening as per specification & drawing complete as specified and directed. 45 S & F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S.tubes for top & bottom rails.M.S.frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete as specified and directed. 46 S&F pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed. 47 S&F 2nd class hardwood glazed and skelton shutters, 35mm thick, open rebated and prepared to receive glass, gauze etc with sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mtred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24 (a) complete as specified and directed. 48 S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. 49 S & F mild steel butt hinges 100mm long medium weight cold rolled , complete all as specified and directed. 50 S&F Aluminium anodised barrel tower bolt of extruded section and fixed of 150mm size complete as specified and directed. 51 S&F 125mm size aluminium handles, cast type anodised complete as specified and directed. 52 S & F 15mm dia stop valve CP fancy type long body screwed to unioun or GI pipe etc complete as specified and directed. 53 S & F GI water tubes medium grade 15mm bore with fittings laid in floors/wals complete all as specified and directed . 54 All as per item No 28 above but 20mm bore complete as specified and directed. 55 S & F vitreous china squatting pan, Orissa pattern, size 580 x 440mm white, with integral foot rests,including trap set in and including concrete, connection to trap, and to flushing pipe, anti-syphonic pipe, etc complete including making good of floor (Excluding fixing bolts, flushing cistern and flush pipe) complete as specified and directed. 56 S & F bib tap brass 15mm dia cost copper alloy with butter fly handle CP fancy type complete as specified and directed. 57 S & F PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets , long bend including flush pipe of PVC 32mm dia and connection to pipes etc complete all as specified and directed. 58 S&F PVC Connections 15mm size and 450mm length complete as specified and directed. 59 S&F 110mm PVC (SWR) WC connections short connections bent type complete as specified and directed. 60 S&F 110mm PVC (SWR) branch pieces, single equal or unequall complete as specified and directed. 61 S&F 110mm PVC (SWR) Bends any radius complete as specified and directed. 62 S&F 110mm PVC(SWR) vent cowls complete as specified and directed. 63 S&F110mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete as specified and directed. 64 All as per item No 63 here-in before but fixed in wall complete as specified and directed. 65 M&L providing pre-cast RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in manhole cover slabs, set in cm 1:4 including necessary form work complete all as specified and directed. 66 S&F 10mm dia and over deformed/TMT treinforcement,cut to length bent to shape etc as required incl binding with MS wire annealed not less than 0.90m dia complete as specified and directed. 67 Al as per item No 66 here-in-before but 6 to 8 mm dia complete as specified and directed. 68 All as per item No 67 above but 8mm dia as in stirrups complete as specified and directed. 69 Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I (cpacity 1000 litres) complete as specified and directed. 70 M&L Ball brass valves, high pressure, with polythene float and flunut complete, screwed for iron pipe or brass ferrule and fixed 20mm bore fixed in repair complete as specified and directed. 71 S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete as specified and directed. 72 M&L preparing new surface of steel any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete as specified and directed. 73 S&F Vitreous china wash Basin white flat back size 550 x 400mm including brackets, cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed complete as specified and directed. 74 S&F 32mm low density polyethylene (LDPE) pipes complete as specified and directed. 75 S&F pillar cock 15mm dia CP fency type complete as specified and directed. 76 S&F 32mm waste fittings brass chromimum plated for basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete as specified and directed. 77 S&F 600mmx450mm aluminium frame mirror of selected quality glass mounted on 6mm thick commercial ply wood and fixed to wedge plugs with cromimum plated brass, screws and cup washers complete as specified and directed. 78 S & F Tubular towel rail, 20mm dia, D type, 60 cm long between flanges CP brass. complete as specified and directed. 79 S&F brass chromium plated shower rose 125mm size complete all as specified. 80 S & F soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and directed . 81 S & F Sheet glass, figured glaas ,pin headed in square n exc 0.5 sqm in each pane, 3mm thick complete as specified and directed. 82 M&L 15mm thick screed in CM 1:6 on brick or concrete surfaces for fixing of tiles as in floor complete as specified and directed. 83 S&F Non skid ceramic colour tiles of size 300 x 300 x 7 to 8 mm thick in floor in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete as specified and directed. 84 All as per item No 58 above but size of tile 400x400x8mm thick , in floors complete as specified and directed. 85 M&L Screed bed backing layer of cement mortar 1:4, 10mm thick for skirting/dado etc complete all as specified and directed complete as specified and directed. 86 S&F Glazed ceramic colour tiles (300x200mm) 7mm thick, in dado/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete as specified and directed. 87 S&F Steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed. 88 M&L plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in concrete bed to drain pipes of 150mm bore, laid to slope including packing under and hanuching against the sides of pipes after they are laid and tested complete all as specified and directed. 89 M&L salt glazed stone ware drain pipe, grade A 150mm bore (internal dia) laid in trenches on concrete bed to required slope jointed and tested complete all as specified and directed(Note:- Excavation/earth work and concrete bed shall be measured and paid for separately) 90 M&L PCC 1:2:4 type B-O, using 12.5mm graded stone aggregate as in manholes floors etc and to be finished even and smooth with suing extra cement complete all as specifed and directed 91 M&L 10mm thick Screedbed in CM 1:4 on brick or concrete surfaces with WPC on roof. 92 S&F stop valves, 20mm bore dia of pipe cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete as specified and directed. 93 Form work to edges of concrete flats, treads, opening in concrete walls, floor and roofs n.exc 20cm wide and sides of RCC/PCC bands in walls etc for fair finished complete all as specified and directed. 94 Forming Contration (Dummy) joints 30 mm deep x 10 mm wide, filled with sealing compound (1 part of bitument and 3 part of sand) complete all as specified and directed. 95 All as per item No 94 above but without glazing bars complete as specified and directed. 96 S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed. 97 S&F 300mm mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed. 98 M&L rendering 5 mm thick cement plaster in mix 1:3, on fair faces of concrete of ceiling surface complete all as specified and directed. 99 Forming square grooves in plaster n.exc 12mm deep and n exc 15mm on face complete all as specified and directed. 100 Preparation of concrete roof surfaces by washing down with water and applying roof treatment as under :- (a) Brushing neat cement slurry with 3.00 kg of cement per square metre (b) Applying bitumineous primer @ 0.30 litre per Sqm of surface (Shalitex Primer of STP Limited or equivalent as approved by GE (c) Laying of 3mm thick APP Modified water proofing membrance with non-woven polyster Reinforcement on hot applied bitumen with 100mm over lap at joints by torching on the transverse direction and 75 mm on longitudinal directional all as per manufacturers instructions (d) Applying a coat of bitumineous aluminium paint @ 0.10 litre/SM (Super Silver sheild of STP Ltd or equivalent as approved by GE) 101 Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed. 102 Excavating over areas, n exc 1.5 m deep and getting out complete all as specified and as directed. 103 M & L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in foundation filling mass concrete and packing of post etc complete as specified and directed. 104 M&L RCC 1:1.5:3 nominal mix using 20 mm graded aggregate for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete as specified and directed. 105 Formwork rough finished flat surfaces of concrete to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete as specified and directed. 106 M&L RCC 1:1.5:3 nominal mix using 20 mm graded aggregate for Columns, pillars, piers, posts and struts complete as specified and directed. 107 Formwork Square/Rectangular to sides of pillars, posts, struts, piers, columns and stanchions complete as specified and directed. 108 M&L RCC 1:1.5:3 nominal mix using 20 mm graded aggregate for Beams, cantilevers, bressummers, lintels over 1.5m span complete as specified and directed. 109 Formwork flat to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete as specified and directed. 110 M&L RCC 1:1.5:3 nominal mix using 20 mm graded aggregate for Chajja complete as specified and directed. 111 Formwork flat to chullah hoods, chajjas, troughs and similar items including edges complete as specified and directed. 112 M&L RCC 1:1.5:3 nominal mix using 20mm graded aggregate for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete as specified and directed. 113 Formwork Flat to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete as specified and directed. 114 M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete as specified and directed. 115 All as per item No 114 here-in before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete as specified and directed. 116 M & L for 50mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in DPC complete as specified and directed. 117 M&L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:6) on wall finishing the surfaces even and smooth without using extra cement complete as specified and directed. 118 M&L for 5 mm thick cement plaster in cement mortar 1:3 for ceiling, finished even & smooth without using extra cement complete all as specified and directed. 119 M&L for preparing newly platered surfaces and applying distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as permanufacturers specification. Two or more coats on new work over priming plastered or other surface with alkalli-resistant priming paint over 1mm thick wall care putty on ceiling complete all as specified and directed 120 M&L for preparing newly platered surfaces and applying distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as permanufacturers specification. Two or more coats on new work over priming plastered or other surface with alkalli-resistant priming paint over 1mm thick wall care putty on walls complete all as specified and directed 121 M&L for preparing the new plastered surfaces and applying two coats of exterior Emulsion weather proof coat white or tinted on walls/soffit of chajja surfaces complete all as specified directed. 122 Supply only integral water proofing compound. complete as specified and directed. 123 M/L double charged vitrified tiles 600x600mm, glossy finish (light shade 10 mm thick (square / rectangular ) polish,as in floor etc set and jointed, joint free and pointed in white or coloured cement to match incl 20 mm thick screed bed in CM 1:6 on concrete surface rough finish to recive tiles of approved shade & colour complete all as specified and directed. 124 All as per Item No 123 above but skirting/dado incl 10mm thick rendering in cement mortar 1:4 finished rough to recive tiles all as specified and directed. 125 M & L for 25mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in flooring finished even and fair complete as specified and directed. 126 M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in CM 1:4 complete as specified and directed. 127 M & L for 100mm thick RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in path/paving/hard standing and finishing the surfaces even and even complete as specified and directed. 128 M&L for coloured cheuered cement concrete tiles 20cmx20cmx25mm thick with gray cement and pigment, set,jointed and pointed in neat cement slurry in floors including 15mm thick screedbed in CM 1:6 all as spd and directed 129 M & L , PCC (1:2:4), type B-1 using 20mm graded stone aggregate as in coping etc incl weathering, slightly rounded or chamfered and throating with necessary form works complete all as specified and directed. 130 S&F in repairs decorative curtain rod made out of 25mm dia (outer dia) MS pipe having wall thickness 0.63mm, PVC coated of any colour and pattern as approved overall dia 28 to 28mm, includiing and including two nos brackets on each ends alongwith globe on each ends for earch window/door fro fixing complete all as specified and directed with fancy design complete as specified and directed. 131 S&F powder coated Aluminium three track sliding glazed window manufactured with approved aluminium section with three sliding shutters each shutter width one half of the length of window with the following specifiecation and making good the adjascent surfaces :-(a) Window frame of cross section 101mmx40mmx1.5mm thick.(b) Three way track for smooth slding shutters of cross sections 91.80mmx31.75mmx1.1mm thick. (c) Sliding shutter frame of cross section 40x18x1mm.(d) Aluminium glazing stip of size 18.2x16.66mm. (e) 4mm thick flat glass superior quality for two shutter. (f) IDPE rubber gasket for fixing glass. (g) Locking cleat/device as shutter 01 Nos. (h) 02 Nos sliding roller per shutters. (j) aluminium wire cloth 0.36mm stainless steel nominal dia of wire and average width of aperature 1.40mm for one shutter.(k) Fixing screws for frame with wall 06 per window with fancy design.(Note: Window will be measured outer to outer frame and no extra to be paid. 132 M&L for powder coated alumunium chowkhat/Partition frame of size 0.6mmx44.5mmx1.5mm thick in section fixed to walls and alumunium frame with anodised alumunium screws complete all as specified and directed. 133 S&F powder coated alumunium glazed door shutter with two panel made of vertical style of size 85x44.5x1.5mm and Top rail size114.30x44.5mmx1.5mm bottom rail 150mmx44.5mmx1.5mm and middle rail 114.3mmx44.5mmx1.5mm all alumunium section including all fittings as per door shutter such as alumunium door handles round type-2 Nos ,stainless steel hinge 100mm size -4Nos,central mortice lock ,alumunium tower bolts 300mm-2 Nos double leg alumunium anodised door stopper and hydraullic door closer ,designation No 2, universal type ,cast iron body ISI marked and necessary clips rubber packing and alumunium beading to receive and including 5.5mm thick plain tined glass or 6mm thcik alumunium composite panel in top and bottom panel. complete all as specified and as directed 134 Supply & Fixing 5 mm thick figured glass, pin head type and glazing with oil putty in squre and fixed inside aluminium frame exc 0.5 Sqm in each pane all as specified and directed. 135 Supply & Fixing 9 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed inside aluminium frame all as specified and directed. 136 M&L 8mm thick designer ceiling board (Make : Everest or equivalent as approved by GE) in ceiling fixed with screw as per manufactures instructions, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33mm thick galvanized steel sheet & of size T 24x32mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2m of GI wire 4mm dia fixed pipe or wall plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runners at 600mm c/c to form 600x600mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 19x19mm of white colour all as per instruction complete all as specified & directed. 137 Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner complete as specified and directed. 138 M&L point wiring for One light/Fan point controlled by one five amps one way single pole switch complete with 1.5 sqmm , single core , multi stranded copper conductor PVC insulated and unsheathed FRLS cable 1100 Volts grade , drawn through PVC concealed conduit 20/25 mm dia on wall/ceiling ,including replacement by new 3 mm thick phenolic laminated sheet top covers and sunk type CI/steel terminal boxes ,cromium plate screw as suitable size for mounting of switch & scoket including 1.5 sqmm size pvc insulated unsheathed copper conductor to common earth and connecting to earth dolly complete all as specified and directed.Note: The rate quoted is deemed to be included for Penolic sheet (Hylem) and steel terminal box , cutting of hylem sheet for fixing of switch and scoket including cutting chases in wall making good to disturbed surface and matching with existing surfaces. 139 All as per Ser item No 138 here-in-before but one 3 Pin Socket out let 5 Amps on the same board. 140 Supply and fix Switch Piano type, single pole, one way 5 Amp complete all as specified & directed. 141 S&F Socket out let 2-in-1 2/3 pin 5 Amps complete all as specified and directed. 142 S&F Ceiling rose, 3 terminal PVC/polycarbonate complete all as specified and directed. 143 M&L for submain complete with 2x4 sqmm, single core, multi stranded copper conductor , PVC insulated and unsheathed FRLS cable 1100 Volts grade, drawn in with and including PVC concealed conduit 20/25 mm dia as per site requirement along walls/ceiling etc including 4 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed. Note:- (i) all three wire(Phase red colour,neutral black colour and earth wire green colour) should be run through for each individual circuit from the DBs(ii) painting over surface conduit to be done to match with walls/ceiling existing surfaces. (iii) Two run of wire (phase & neutral) and one run of wire (earth conductor) be measured as one length) 144 S&F in replacement of sheet metal enclosure MCB SPN DB 4 Way type 240 volts Double Door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed by Engineer in charge 145 S&F MCB SP( 6 to 32) Amp 240 volt C curve complete all as specified and directed. 146 S & F in replacement of 240V, 10KA MCB SPN 40 Amps C Series fixing in DBs, connecting with bottle type copper thimbles complete all as specified and as directed. 147 S&F LED tube light fitting 20 watt 230 Volt ultra slim linear LED Lighting with aluminium housing & integrated electronic driver, including all internally pre-wired and inncluding connecting with flexible copper conductor cable with suitable size complete all as specified and directed at site. 148 All as per Ser item No 1 here-in-before but point wiring with 2.5 sqmm for 15 Amp socket out let & provision of earth wire 2.5 sqmm connected to common eart dollycomplete all as specified and directed. 149 S&F Switch piano type , single pole , one way 15 Amps complete all as specified and directed. 150 S&F Socket outlet 2-in-1, 3 pin ,5 and 15 amps , flush type complete all as specified & directed. 151 Supply and fix MCB DB SPN 8 way double door with metal door suitable for housing of MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed at site. 152 S&F PVC ventilating air fan single phase 300 mm sweep complete with louver shutter and including making of hole suitable size fan base after cutting of brick/stone wall /suitable size of water proof ply wood complete all as specified and directed. 153 All as per Ser item No 138 here-in-before but one 3 Pin Socket out let 5 Amps on the independent board complete all as specified and directed. 154 All as per Ser item No 138 here-in-before but point wiring with 2.5 sqmm for 15 Amp socket out let & provision of earth wire 2.5 sqmm connected to common eart dolly complete all as specified and directed. 155 Supply and Fix modular switch one way 6 Amp 240 volts one module complete all as specified and directed.. 156 Supply and Fix modular switch one way 16 Amp 240 volts one module complete all as specified and directed. 157 Supply and Fix socket modular one way 6 amp 240 volts two module complete all as specified and directed. 158 Supply and Fix socket modular one way 16 amp 240 volts two module complete all as specified and directed. 159 M&L for lamp holder , PVC /Polycarbonate type with back plate suitabl for batten fittings complete all as specified and directed. 160 M&L for submain complete with 2x1.5 sqmm, single core, multi stranded copper conductor , PVC insulated and unsheathed FRLS cable 1100 Volts grade, drawn in with and including PVC concealed conduit 20/25 mm dia as per site requirement along walls/ceiling etc including 1.5 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed. Note:- (i) all three wire(Phase red colour,neutral black colour and earth wire green colour) should be run through for each individual circuit from the DBs(ii) painting over surface conduit to be done to match with walls/ceiling existing surfaces. (iii) Two run of wire (phase & neutral) and one run of wire (earth conductor) be measured as one length) 161 All as per ser item No-160 here-in-before but 2X2.5 Sqmm and 1X 2.5 Sqmm for Earth wire complete all as specified and directed. 162 All as per ser item No-160 here-in-before but 2X 6 Sqmm and 1X 6.0 Sqmm for Earth wire complete all as specified and directed. 163 Supply and fix MCCB DB VTPN 4 way with metal door suitable for Provision of incommer as MCCB and out going MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed. 164 Supply and fix MCCB 100 Amp 415 volts 16kA 4 pole complete all as specified and directed at site. 165 S&F isolator DP 63 Amps C Series fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed. 166 S&F sheet metal enclosure with socket plug top , single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP of capacity 20 Amps to 32 Amps complete all as specified and directed at site. 167 S & F for ceiling fans complete with electronic type regulator and accessories 230 Volts, 1200 mm sweep BEE 5 star rated compelte all as specified and directed. 168 S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. 169 S&F Ultra slim LED panel tube light fitting 36 watt 230 Volt made from extruded aluminium housing frame (recesss/pendant) 2 x2 Complete with all accessories internally pre-wired and inncluding connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed at site. 170 S & F for Highly efficient LED Bulbs, 9 W complete all as specified and directed by Engineer in charge 171 Supply, Laying,connecting, testing and commissioning of XLPE LT UG cable of size 35 sqmm 3 1/2 core PVC insulated and sheathed armoured heavy duty cable 1100 V grade with alu conductor cable all as directed. 172 Excavation in trenches in loose/soft soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying of cables, poles/stays and struts etc and getting out including trimming sides and forming bottom surface complete, all as specified. 173 Removing excavated surplus (soil) obtained from excavation to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete, all as specified. 174 Returning & filling in including spearing, leveling watering and well ramming in layers not exc 25 cm thick complete all as specified and directed. 175 Supply and Spread dry river sand for cable cushioning in trenches all as specified and directed.Note : Punned down thickness shall be considered for measurement. 176 Supply and lay burnt bricks sub class ‘B’ old size laid dry in trenches across the cable protection all as specified and as directed 177 M &L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not lessthan 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed by Engr in Charge.Note :- i) Earthing test must be carried out in presence of Engr-in-Charge.ii) The earthing result not more than 2 Ohms or disered earth resistance value.iii) Megger required for testing will be be provided at site by the contractor.iv) Contractor shall submit earth resistance testing report before submission of bill.
