Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 25-09-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 02-10-2024 |
| 2 | 10-09-2024 | AMENDMENT | Technical Bid | 25-09-2024 |
| 3 | 10-09-2024 | BOQ Corrigendum | BOQ | 25-09-2024 |
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone boulder, precast PCC block masonry including all quoins, arches, pillars, etc, built in cement mortar complete all as specified and as directed. |
| 2 | Material and labour for precast PCC 1:3:6 Type C1 using 20 mm graded aggregate solid block masonry exceeding 10cm width, built in cement mortar 1:6 complete all as specified and as directed. |
| 3 | Taking down cement plaster on brick or stone masonry surfaces etc including racking out joints hacking for keys, scrubbing down wth water etc. complete all as specified and as directed. |
| 4 | Material and labour for 5mm thick rendering on concrete ceiling surfaces in CM 1:3, finished even and smooth without using extra cement all as specified and as directed. |
| 5 | Material and labour for 15mm thick rendering in cement mortar 1:4, on fair faces of brick work/concrete surfaces using water proofing compound @3% by weight of cement finished even and smooth without using extra cement complete all as specified and as directed.Note: Water proofing compound shall be measured separately. |
| 6 | Material and labour for 10mm thick rendering in cement mortar 1:6, on fair faces of brick work/concrete surfaces, finished even and smooth without using extra cement all as specified and as directed. |
| 7 | Material and labour for preparing newly plastered wall surfaces and applying two coats of oil bound distember paint over a coat of chalk whitening complete all as specified and as directed. |
| 8 | Material and labour for preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and as directed. |
| 9 | Material and labour for applying 3 coats of white wash to newly plaster surfaces including preparation of new surface of ceiling complete all as specified and as directed. |
| 10 | Material and labour for preparation of old plastered/ unplastered surfaces of walls including washing, rubbing down or wire brushing and applying one coat of acrylic emulsion distemper washable complete all as specified and as directed |
| 11 | Material and labour for complete removal of existing treatment by mechanical jet spray /grinder and applying two coats of oil bound distember over a coat of primer on walls complete all as specified and as directed. |
| 12 | Material and labour for preparation of old plastered/ unplastered surfaces of walls including washing, rubbing down or wire brushing and applying one coat of cement based paint complete all as specified and as directed |
| 13 | Material and labour for complete removal of existing treatment by mechanical jet spray /grinder and applying two coats of cement based paint over a coat of alkali resistant primer on walls complete all as specified and as directed. |
| 14 | Material and labour for preparation of old plastered/ unplastered surfaces of walls including washing, rubbing down or wire brushing and applying one coat of antifungal weather proof paint hrough authorised company applicator using modern tools and spray technique complete all as specified and as directed |
| 15 | Material and labour for complete removal of existing treatment by mechanical jet spray /grinder and applying two coats of antifungal weather proof paint over a coat of exterior primer through authorised company applicator using modern tools and spray technique on walls complete all as specified and as directed. |
| 16 | Material and labour for complete removal of existing treatment by mechanical jet spray /grinder and applying two coats of apex ultima/ antifungal weather proof paint over a coat of exterior primer through authorised company applicator using modern tools and spray technique of OHT (upto 21m height) walls, top and bottom portion under area of responsibility including necessary scaffolding arrangement complete all as specified and as directed by Engr-in-charge. |
| 17 | Material and labour for preparation of old steel surfaces of any description exceeding 10cm width or grith not otherwise specified and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 18 | Material and labour for preparation of old wooden surfaces of any description exceeding 10cm width or grith not otherwise specified and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 19 | Material and labour for preparation of new or previously untreated wooden surfaces of any description exceeding 10cm width or grith not otherwise specified and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 20 | Dismantling wrought iron or mild steel work of any description not otherwise complete all as per specified and as directed. |
| 21 | Supply and fixing mild steel plates, plain or chequered, 5mm thick or over in thickness of grade Fe 410-W (Gde- E- 250) quality- B, in available sizes at site complete all as specified and as directed |
| 22 | Supply and fix roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing using mild steel section of Fe-410W Gde-E-250 quality B, beam, tee, angles, channels or flat sections including distance pieces, cleats etc complete all as specified and as directed. |
| 23 | Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description, over 10cm in width or girth, not otherwise described including preparation of surfaces complete all as specified and as directed. |
| 24 | Material & labour for seven course water proofing treatment over RCC slab by applying oil based bitumen primer @0.20 Kg/Sqm, providing and laying 4 mm thick APP modified water proofing membrane weighing not less than 4.00 Kg/Sqm reinforced with one woven polyester mat weighing not less 160g/Sqm having softening point not less than 140 degree centigrade longitudinal tensile strength not less than 650 N/5 cm, tearing strength of 180 N/torch application including minimum 10 cm side over lap & 15 cm end overlap, applying a coat of blown grade hot bitumen 90/15 over membrance @ 1.2 Kg/Sqm and applying solar reflective/ bituminous aluminium paint @ 100 gm/Sqm complete all as specified. |
| 25 | Fixing only chain link fencing including line wire, lapped, wired and laid in position incl closing after filling, welding, fixing angle iron etc incluidng taking down of old chain link fencing any type complete all as specified and as directed by Engr-in-Charge. |
| 26 | Supply and fix PVC coated GI chain link fencing weighing 4kg/Sqm having mesh size 50mm x 50mm, nominal dia of wire 4mm including PVC coated fixed to fencing post using suitable bolts and nuts complete all as specified and as directed. Note: Nuts and bolts shall be measured and paid seperately |
| 27 | Dismantling post or struts (wood, steel or RCC) any section, including taking out embedded portion in concrete and making good the disturbed ground all as specified and as directed. |
| 28 | Excavation in post holes or similar holes, each not exceeding 0.5 cum, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm complete all as specified and as directed. |
| 29 | Material & labour for precast reinforced cement concrete as in fencing post/struts in 1:2:4 type B2 using 40mm graded stone aggregate including neccesary form work complete all as specified and as directed. |
| 30 | Supply and fix fencing posts bracket and struts including securing bolts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etcflat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 with rollers on top of each post for provision of tying the nets complete all as specified and as directed. |
| 31 | Supply and fix mild steel screw bolts of 05 to 10mm diameter of shank (Machine made) with hexagonal or square heads at one end and screwed the other each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5cm and not exceeding 10cm to fix the mesh to the post complete all as specified and as directed. |
| 32 | Material and labour for mild steel round bars, 10mm dia and over confirming to Fe-410-W (Gde E-250) quality-A or Fe 290 (Gde -E-165) cut to length bent to shape required including cranking, bending, spirally hooping for columns hooking ends and binding with mild steel wire annealed not less than 0.9mm dia complete all as specified and as directed. |
| 33 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing removing materials and rubbish off the premises complete all as specified and as directed. |
| 34 | Material and labour for 25mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in floors and pavings etc finished even and smooth without using extra cement complete all as specified and as directed. |
| 35 | Material and labour for joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not excceding 0.11 sqm, in floors, set and jointed in epoxy mortar and pointed in white of coloured cement to match over to match the colour of tiles including screed bed 10mm thick in cement mortar 1:4 complete all as specified and as directed. |
| 36 | Material and labour for joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not excceding 0.38 sqm, in floors, set and jointed in epoxy mortar and pointed in white of coloured cement to match over to match the colour of tiles including screed bed 10mm thick in cement mortar 1:4 complete all as specified and as directed. |
| 37 | Material and labour for glazed ceramic coloured tiles of size 350 x 250 x 7mm/450 x 350 x 7mm, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles on vertical surface complete including backing coat of 10mm thick in CM 1:4 complete all as specified and as directed. |
| 38 | Material and labour for fixing swimming pool/fountain coloured tiles (square/rectangular) area of each tile not exceeding 0.11 sqm fixed using high performance polyurethene epoxy based adhesive Nitotile GPX (Fosroc)/ Nitotile MPA or equivalent as approved by GE whichever is applicable in floor/wall complete all as per the manufacturer instructions and as directed by Engr-in-Charge. Note: Joint filling shall be measured and paid seperately |
| 39 | Material and labour for epoxy tile joint filling using Nitotile EPW (Fosroc) or equivalent as approved by GE on floor and walls complete all as per the manufacturer instructions and as directed by Engr-in-Charge. |
| 40 | Material and labour for calibrated prepolished kota stone slab 20-25mm thick as in flooring including 20mm thick cement screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.Note: Final cutting shall be done at site and surface finished with bee-wax polish. |
| 41 | Material and labour 75mm thick plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in sub base, sub floors, floors and pavings etc complete all as specified and as directed. |
| 42 | Material and labour for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed with grey sement and no pigment set, jointed and pointed in neat cement slurry in floors over and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 43 | Material and labour for machine pressed precast concrete interlocking paver block with grey cement & pigment, glossy finish, reflective type, any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade including 50mm thick bedding with 6 to 10mm graded coarse aggregate complete all as specified and as directed. |
| 44 | Material and labour for plain cement concrete 1:2:4, type B1, using 20mm graded stone aggregate as in coping, apex stones etc including necessary form work complete all as specified and as directed. |
| 45 | Demolition of cement concrete unreinforced, in ground floor and paving not exceeding 15cm thickness above or below ground level complete all as specified and as directed. |
| 46 | Material and labour for 100mm thick plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub floors, sub base, floors and pavings etc complete all as specified and as directed. |
| 47 | Material and labour for 75mm thick plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection/ pavement complete all as specified and as directed. |
| 48 | Taking down chowkats or frames with shutters not exc 1.5Sqm each without taking off shutter from the frame & removed to store complete all as specified and as directed. |
| 49 | Taking down chowkats or frames with shutters exc 1.5Sqm and n. exc 4Sqm each without taking off shutter from the frame & removed to store complete all as specified and as directed. |
| 50 | Supply and fix powder coated aluminium frame for windows, doors & ventilators with one or more rebates including joining cleats for fixing etc. complete all as specified and as directed |
| 51 | Supply and fix powder coated aluminium door shutters, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no), hinges type B-21 100mm long (2 no) suitable handle (1 no) complete all as specified and as directed. |
| 52 | Supply and fix powder coated aluminium window and ventilators shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no), hinges type B-21 100mm long (2 no) suitable handle (1 no) complete all as specified and as directed. Note: Glass panel and wire mesh shall be measured and paid separately. |
| 53 | Supply and fix anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge |
| 54 | Material and labour for veneered decorative plywood, 9mm thick plywood, grade 1 with BWR resin, with decorative face veneers on both faces, fixed with screws to timber frame work complete all as specified and as directed. |
| 55 | Supply and fixing in repairs brass mortice lock vertical type size 75 mm 4 levers including escutcheon plates and two keys all as specified and as directed. |
| 56 | Supply & fix powder coated aluminium work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, in cluding taking down of old unserviceable aluminium partition complete all as per architectural drawings and the directions of Engineer-in-Charge. |
| 57 | Supply & fix in repairs 18-19mm thick pre-laminated particle board, interior grade, one side decorative choice lamination and other side balancing white, fixed with screws to frame work complete all as specified and as directed. |
| 58 | Supply & fix in repairs hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified and as directed. |
| 59 | Supply & fix in repairs continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flap 30mm complete all as specified and as directed. |
| 60 | Supply & fix in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed |
| 61 | Material and labour for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated in the solid, rounded or chamfered put together with glue, pinned at joints complete all as specified and as directed. |
| 62 | Material and labour for 40mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats complete all as specified and as directed. |
| 63 | Supply and fix 30mm thick second class hard wood, glazed and skeleton shutters, open rebated and preparation to receive glass gauzeetc (with out sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I section and clause 8.24 (a), supplied and fitted to chowkats complete all as specified and as directed. |
| 64 | Hacking out broken glass of any thickness size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed. |
| 65 | Supply and fix glass panels of sheet glass 4.8mm thick ordinary quality and glazing with oil putty exceeding 0.5Sqm in each pane complete all as specified and as directed. |
| 66 | Supply and fix glass panels of sheet glass 4mm thick ordinary quality and glazing with oil putty not exceeding 0.5Sqm in each pane complete all as specified and as directed. |
| 67 | Supply and fix aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed. |
| 68 | Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube and fixing in opening as per specification, provision of MS stay at bottom to steady the frame including taking down of u/s old PVC/UPVC/FRP door shutters complete all as specified and directed. |
| 69 | Supply and fix factory made solid PVC moulded door shutter, with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelaminated PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, fixing in frame all as specified and as per drg given in clause 8 of SSR Part II complete all as specified and as directed. |
| 70 | Supply & fix in repair 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 71 | Supply & fix in repair 100mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 72 | Supply & fix in repair 100mm butt hinges, mild steel, cold rolled, medium weight and fixed complete all as specified and as directed. |
| 73 | Supply & fix in repair 300mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing and sliding bolt of extruded section and fixed to shutter with screw complete all as specified and as directed. |
| 74 | Supply & fix in repair 125mm long anodised, aluminium door handle cast type fixed to shutter with screw complete all as specified and as directed. |
| 75 | Supply and fix in repairs vitreous china wash basin, white, flat back, size 580 x 450mm excluding taps, waste chain and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed. |
| 76 | Supply and fix in repairs vitreous china wash down water closet pan pedestal pattern white with and including fixing bolts, seat cover black closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, but excluding PVC flushing cistern and flush pipe complete all as specified and as directed. |
| 77 | Supply & fix in repairs to 10 litres, PVC, valve less syphonic action type, flushing cistern, low level, with inlet, ball valve, float, handle, and inclusiveof brackets and connections to pipes complete all specified and as directed |
| 78 | Supply and fix in repairs stainless steel gratings down 100mm dia complete all as specified and as directed. |
| 79 | Supply and fix in repairs 15mm bore, fancy type, CP, bib taps, cast copper alloy with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 80 | Supply and fix in repairs 15mm size, concealed stop cock, regular body, quarter turn with flange, chromium plated, fancy type complete all as specified and as directed. |
| 81 | Supply and fix in repairs 15mm bore fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 82 | Supply and fix in repairs brass chromium platedtubular towel rail 20mm dia D type, 60cm long, fixed with wood gutty and steel screws complete all as specified and as directed. |
| 83 | Supply and fix in repairs 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 84 | Supply and fix in repairs 15 mm size PVC connection with PTMT nuts of length 450mm complete all as specified and as directed |
| 85 | Supply and fix in repairs chromium plated shower rose, fancy type 125mm with or without swivel joints any size including fixing to steel pipe or union complete all as specified and directed. |
| 86 | Supply and fix in repairs 15mm size health faucet, ABS body, mild steel, chromium plated with wall hook and 1metre stainless steel braided rubber hose pipe complete all as specified and as directed. |
| 87 | Supply & fix in repairs 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed. |
| 88 | Supply and fix in repairs Gun metal Gate/Globe valve with iron wheel head, screwed both ends suitable for fixing with CPVC pipe of outer dia 20mm complete all as specified and as directed by the Engineer-in-charge. |
| 89 | Supply and fix in repairs 20mm dia CPVC pipes SDR-11 & plain CPVC SDR 11 fittings, high pressure, fixed on wall/ceilings or laying in floors with all necessary fittings, solvents including taking down old unserviceable PVC/PP-R/ GI tubing complete all as specified and as directed. |
| 90 | Supply and fix in repairs 25mm dia CPVC pipes SDR-11 & plain CPVC SDR 11 fittings, high pressure, fixed on wall/ceilings or laying in floors with all necessary fittings, solvents including taking down old unserviceable PVC/PP-R/ GI tubing complete all as specified and as directed. |
| 91 | Supply and fix 500 Ltrs rotational moulded polythylene water storage tank, cylindrical vertical with closed top, hoisted and fixed in position all as specified in SSR part I, ISI marked including dismantling unserviceable tank complete all as specified and as directed. |
| 92 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc.) including cover fillets and removal of debris complete all as specified and as directed. |
| 93 | Supply & fix anodised aluminium snap grid frame work for false ceiling with 605mm x 605mm size, consisting of main Tee of size 23.50mm x 36.50mm x 1.50mm, cross tee of size 23.50mm x 23.50mm x 1.50mm and wall angle of size 36.00mm x 25.00mm x 1.50mm of approved make including all necessary cuttings, fixing of aluminium section firmly in position with and including steel hangers 6 mm dia G.I. wire (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 40 mm long in soffit of slab/walls complete all as specifed and as directed including provision of 6mm thick Non asbestos fibre cement building boards fixed in ceiling, flat or sloping complete all as specified and directed. |
| 94 | Material and labour for re-writing of existing letters or figures (Block, roman, Italic or Indian) n.exe 30cm high complete all as specified and as directed. |
| 95 | Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 96 | Returning, filling in including spreading, levelling, watering and well ramming in layers n. exc. 25cm deep with approved soil obtained from excavation complete all as specified and as directed. |
| 97 | Removing excavated soil to a distance not exceeding 1.5Km not exc 5.0Km and depositing where directed at a level, not exceeding 1.5 metre above the starting point complete all as specified and as directed |
| 98 | Demolition and breaking up drain pipes (salt glazed, stoneware, AC or reinforced concrete/PVC pipes)set in cement mortar of dia 150mm dia complete all as specified and directed. |
| 99 | Material and labour for concrete bed to drain pipes of 150mm bore with cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate including packing under and haunching against the sides of pipes and tested complete all as specified and as directed. |
| 100 | Supply and fix PVC (SWR) pipes 150mm dia, single socketed, in any length with rubber ring joints, fixed with necessary clamps/fittings laid in floors or trenches complete all as specified and as directed. |
| 101 | Demolition and breaking up drain pipes (salt glazed, stoneware, AC or reinforced concrete/PVC pipes)set in cement mortar of dia 100mm dia complete all as specified and directed. |
| 102 | Material and labour for concrete bed to drain pipes of 100mm bore with cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate including packing under and haunching against the sides of pipes and tested complete all as specified and as directed. |
| 103 | Supply and fix PVC (SWR) pipes 110mm dia, single socketed, in any length with rubber ring joints, fixed with necessary clamps/fittings laid in floors or trenches including taking down of old pipes of any type and size complete all as specified and as directed. |
| 104 | Supply & fixing in repairs PVC (SWR) Bend 110 mm dia complete all as specified and as directed. |
| 105 | Supply & fixing in repairs PVC (SWR) vent cowl 110mm bore complete all as specified and as directed. |
| 106 | Supply & fixing in repairs PVC (SWR) vent cowl 75mm bore complete all as specified and as directed. |
| 107 | Material & Labour for cleaning of manhole by mechanical means up to 1.5 metre depth by removing manhole cover including removing of earth soil spread over the cover if any from the frame of septic tank and receiving chambers, removing of all night soil sediments and waste materials etc irrespective of its height clearing off up to the bottom floor and dispose of the materialsare to be taken from the respective vicinities on covered conveyance and disposed off out ofto a distance not exceeding 100 metres from septic tank to a pit suitably excavated to contain night soil and it shall be covered with excavated earth on top and place back the manhole cover to its original position and removing all vegetable roots if any and making good surround completely all as specified. |
| 108 | Cleaning of 150mm dia PVC/ SWG/ CI pipe line manually or mechanically using cleaning rod or compressor and removing of foreign material after removing the existing blockage below ground including necessary excavation and refilling complete all as specified and as directed. |
| 109 | Cleaning of 75/100/110m dia PVC/ SWG/ CI pipe line manually or mechanically using cleaning rod or compressor and removing of foreign material after removing the existing blockage below ground including necessary excavation and refilling complete all as specified and as directed. |
| 110 | Cleaning/clearing chock of IWC/EWC manually or mechanically using cleaning rod or compressor etc complete all as specified. |
| 111 | Cleaning/clearing chock of floor trap/Nahani trap or gully trap manually or mechanically using cleaning rod or compressor etc complete all as specified. |
| 112 | Removing grass, plants and vegetation including roots from wall and roof surfaces and plastering disturbed surface with 15mm thick CM 1:4 with WPC and applying two coat of cement base paint over alkali resistant primer including required scaffolding complete all as specified by Engineer-in-charge. |
| 113 | Supply and fix PVC (SWR) 75mm dia of outlet, floor trap, plain with grating including jointing to waste pipe fixed in solvent cement including dismantling of old trap complete all as specified and as directed. |
| 114 | Supply & fix in replacement PVC Eaves gutter heavy duty half round 200mm dia including drop end with all necessary flat iron fitting complete all as specified and as directed. |
| 115 | Dismantling single layers Mangalore pattern or similar tile in roofing complete all as specified and as directed. |
| 116 | Supply and fixing roof tiles, mangalore pattern roof tiles interlocking at side joints laid dry complete all as specified and as directed. |
| 117 | Material & labour for ridge or hip tiles to suit mangalore pattern roofing tiles, bedded and jointed in cement mortar 1:6 complete all as speciified and as directed. |
| 118 | Dismantling of battens for tiles, shingles etc, exceeding 15cm spacing of any size including tilting fillets complete all as specified. |
| 119 | Material & labour for 2nd class hard wood battens, clean sawn at 25cm centres, sectional area exc. 15 & n exc. 25 Sq. cm complete all as speciified and as directed |
| 120 | Dismantling of fillets, rails, posts, rafters, purlins, etc. under 40 sqcm in section complete all as specified and as directed. |
| 121 | Material & labour for 2nd class hard wood plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads sectional area exceeding 13 Sqcm & not exceeding 25 Sqcm as in rafter complete all as speciified and as directed |
| 122 | Dismantling plain/ corrugated steel/ asbestos cement sheet of any gauge thickness and in any position complete all as speciified and as directed |
| 123 | Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel of 0.50mm thickness of any colour having tensile strength of 550 Mpa with coating thickness fixed with GI self taping screws as in roof covering/cladding to wall, ridges, valley guttersfixed to frame work all as per manufacturers instructions complete all as specified and as directed. |
| 124 | Supply and fixing pre-painted galvalume aluminium zinc coating GI based plain steel of 0.50mm thickness of any colour having tensile strength of 550 Mpa with coating thickness fixed with GI self taping screws as in roof covering/cladding to wall, ridges, valley guttersfixed to frame work all as per manufacturers instructions all as specified and as directed. |
| 125 | Supply & fix 0.63mm galvanised corrugated steel sheeting class IV, light coating zinc with two corrugation side lap, fixed with ‘L’ type or ‘J’ type or cranked hook, bolts and washers in roof/ wall etc. complete all as speciified and as directed. |
| 126 | Supply & fix in repair steel rolling shutters, gear operated type with bevel gear box and crank handle having thickness of lath 1.25mm, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete including taking down old shutter of any size with all fitting and fixture complete all as specified and as directed |
| 127 | Supply & fix in repair safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed. |
| 128 | Supply and fix in repair ball bearing for rolling shutters complete all as specified and as directed |
| 129 | Supply & laying hume pipe septic tank for 10 user capacity, designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc., complete all as specified and as directed by Engr-in-Charge. |
| 130 | Taking down copper/ aluminium point wiring of light, fan, socket or power complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directedNote: Credit for above items should be made as per conditions separately |
| 131 | Material & labour for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits) with 1.5 Sqmm nominal cross sectional area, copper conductor unsheathed FRLSH cable 1100 Volts grade including PVC conduit not less than 20mm dia surface mounted and connected accessories ISI marked with concealed sunken boxes with modular cover plate, PVC boxes, hylem sheet, including 1.5 Sqmm nominal cross sectional area PVC insulated copper conductor unsheathed FRLSH cable single core multistranded cable as earth continuity wire for one light/fan point controlled by one switch complete all as specified and as directed. |
| 132 | All as per item No. 131 here-in-before, but for One 5 pin socket outlet 5 amps on the independent board |
| 133 | All as per item No. 131 here-in-before, but for One 5 pin socket outlet 5 amps on the same board |
| 134 | Material & labour for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits) with 2.5 Sqmm nominal cross sectional area, copper conductor unsheathed FRLSH cable 1100 Volts grade including PVC conduit not less than 20mm dia surface mounted and connected accessories ISI marked with concealed sunken boxes with modular cover plate, PVC boxes, hylem sheet, including 2.5 Sqmm nominal cross sectional area PVC insulated copper conductor unsheathed FRLSH cable single core multistranded cable as earth continuity wire for one 6 pin 15 Amp socket outlet point on the independent board complete all as specified and as directed. |
| 135 | Material & labour for sub main wiring with 2 runs of 4 Sqmm single core PVC insulated un sheathed multi stranded copper conductor FRLSH cable 1100Volt grade drawn through and including PVC conduit pipe of medium grade not less than 20mm dia including PVC conduit specials and 1 run of 4 Sqmm cable single core 1100Volt grade multi stranded copper conductor FRLSH cable as earth continuity conductor and connecting including cutting the chases etc and making good the disturbed surfaces to match with the existing surfaces and connecting with suitable size thimble including taking down of old one complete all as specified and as directedNote: Two runs of sub main wire, one run of earth wire and PVC conduit with accessories shall be measured as One unit. |
| 136 | Material & labour for sub main wiring with 2 runs of 6 Sqmm single core PVC insulated un sheathed multi stranded copper conductor FRLSH cable 1100Volt grade drawn through and including PVC conduit pipe of medium grade not less than 20mm dia including PVC conduit specials and 1 run of 6 Sqmm cable single core 1100Volt grade multi stranded copper conductor FRLSH cable as earth continuity conductor and connecting including cutting the chases etc and making good the disturbed surfaces to match with the existing surfaces and connecting with suitable size thimble including taking down of old one complete all as specified and as directedNote: Two runs of sub main wire, one run of earth wire and PVC conduit with accessories shall be measured as One unit. |
| 137 | Supply and fix in replacement socket outlet 6A - 2/3 pin combined 2 modules complete all as specified and as directed. |
| 138 | Supply and fix in replacement switch modular, 5/6 Amps, SP, 230 volts, one way complete all as specified and as directed. |
| 139 | Supply and fix in replacement switch modular, 16 Amps, SP, 230 volts, one way complete all as specified and as directed. |
| 140 | Supply and fix in replacement switch socket combination outlet, multipurpose, 6/16A, 5pin, 230 volts complete all as specified and as directed. |
| 141 | Supply and fix in replacement switch socket combination outlet, 5 in 1, 6/16A, 230 volts complete all as specified and as directed. |
| 142 | Supply & fix in replacement ceiling rose surface bakelite 65 x 50 mm, 3 terminals complete all as specified and as directed |
| 143 | Supply and fix in replacement stepped type electronic fan step regulator, modular type,hum proof, AC, 240V, 5 step, 2 modules complete all as specified and as directed. |
| 144 | Supply & fix in replacement MCB \"B\" curve 40 to 100Amp, 4P, 415 Volt, 10KA complete all as specified and as directed |
| 145 | Supply & fix in replacement MCB \"B\" curve 40 to 63Amp, DP, 230 Volt, 10KA complete all as specified and as directed |
| 146 | Supply & fix in replacement MCB \"B\" curve 5 to 32Amp, SP, 230 Volt, 10KA complete all as specified and as directed |
| 147 | Supply and fix sheet metal enclosures for MCB DBs, double door with locking arrangement, SPN, 8 way, 415V with isolated neutral bus bar 200 Amps, IP-43 protection complete all as specified and as directed. |
| 148 | Supply and fix sheet metal enclosures for MCB DBs, double door with locking arrangement, SPN, 4 way, 415V with isolated neutral bus bar 200 Amps, IP-43 protection complete all as specified and as directed. |
| 149 | Supply & fix in replacement sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 20Amps, 240 Volt, breaking capacity 10kA complete all as specified and as directed. |
| 150 | Supply and fix in replacement LED batten light fittings, 2ft, 9-10 watts, 240V, universal type alongwith LED tube light with doubleside connection, including suitable connection from ceiling rose complete all as specified and as directed. |
| 151 | Supply and fix in replacement LED batten light fittings, 4ft, 20-25 watts, 240V, universal type alongwith LED tube light with doubleside connection, including suitable connection from ceiling rose complete all as specified and as directed. |
| 152 | Supply and fix in replacement LED flat panel 2\"x2\" size surface/ recess mounted (grid/ gypsum type) 36-40W, warm/cool, white with provision of PVC flexible copper conductor cable to light fittings complete all as specified and as directed. |
| 153 | Taking down of existing ceiling fan of any size, with sealing cable end, dismantling blades and painting in situ with two coats of synthetic enamel paint by spraying, filling cavities with filler, servicing and rehanging on original position including necessory connection with copper conductor complete all as specified & as directed by Engr-in-Charge. |
| 154 | Taking down of existing wall/exhaust fan of any size, with sealing cable end, dismantling blades and painting in situ with two coats of synthetic enamel paint by spraying, filling cavities with filler, servicing and rehanging on original position including necessory connection with copper conductor complete all as specified & as directed by Engr-in-Charge. |
| 155 | Supply and fix exhaust fan heavy duty 300mm sweep 230 volts Ac 50 Hz 1400rpm, with high efficient heavy duty mortor and die cast aluminium mortor mounted on two ball bearings, aero dynamically countered blades, rigid frames with rubber mountings etc for silent operation, including connecting up from ceiling rose including taking down old u/s exhaust fan completed all as specified and directed. |
| 156 | Supply and fix wall mounted fan 16\"\" size, three speed, 80W, 230V, with corded wire including mounting arrangements complete all as specified and as directed. |
| 157 | Supply and fix Air circulating fan, wall mounted fan 18\"\" size, three speed, 100W, 230V, with corded wire including mounting arrangements complete all as specified and as directed. |
| 158 | Amount of Credit Schedule shall be deducted to arrive the Contract Sum. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
