Tender For Comprehensive Repair To Certain Md Accn Under Age B/R-I At Ge Jhansi- 1 Material and labour for applying Two coat of oil bound distemper on old plastered surface of walls including preparation with using auto roller for making the surface unfirom complete all as specified and directed. 2 M&L for preparation of existing surface of walls by complete removal of existing treatment andapplying two coats of Oil bound distemper over and including a layer of wall care putty for complete smooth finish of surfaces complete all as specified and directed. 3 All as specified in item No 02 above butapplying one coat of distemper oil bound (using Rollar) white or any tinted on ceilingcomplete all as specified and directed. 4 M&L for preparing old or previously treated surfaces of wood or wood based materials of any description not otherwise describedover 10 cm width or girth and applying one coat of synthetic enamel paint to match the existing surfaces, complete all as specified and directed. 5 M&L for preparing old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. 6 Taking down chowkhats with shutters (without taking off shutters from the frame) area exc 1.5 sqm but not exceeding 4 sqm and making good the disturbed portion/surfaces, in CM 1:3 complete all as directed. 7 All as per item No 06 here-in-above but n.exc 1.5 sqm each 8 Taking down shutters of any description not exc 01 Sqm each, complete all as specified and directed. 9 Taking down shutters of any description exceeding 01 Sqm and not exc 02 Sqm each, complete all as specified and directed. 10 S&F 18mm thick prelaminated MDF board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in any situation as in cup board shelves/shutter or similar work inclding dismantling of old board in any position, complete all as specified and directed. 11 S&F continuous (piano) hinges, mild steel bright finish in electro galvanized width of flat (when open) in 30mm, complete all as specified and directed 12 S&F 125 mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete. 13 M&L Framed work (Fe 290, Gde E -165) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing etc including hinges weld etc completeall as specified and directed . 14 M&L for cement concrete 1:2:4 type B-0 (12.5mm graded aggregate) for bed block for fixing of chowkhats, cills ,pre-cast lintel n.exc 1.5mtr,coping,benching Etc complete all as specified. 15 S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails,MS frames shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strips of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/or sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and directed. 16 S&F factory made solid PVC moulded door shutter 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick Wooden texture moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification and drawing, complete all as specified and directed. 17 S&F of Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood colouredPVC sheet and edges, reinforced with MS square tube, as specified in SSR Part-II 2020 (Section 8, on Page no - 175), complete all as directed. 18 S&F of 100 mm size butt hinges, extruded aluminum alloy with galvanized mild steel pin type B-21anodized complete all specified and directed 19 S&F of 150mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as specified and directed. 20 S&F of 150mm aluminum handle cast type anodized complete all specified and directed. 21 M&L for 35mm thick 2nd class hard woodglazed & skeleton shutter (fully glazed or gauged) open rebated & prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered sash bar, or rounded, fitted with & mitred beads for securing glass/wiremesh etc, conforming to IS-1003 Part-I & II; size of members of shutters as specified in SSR Part-I section–8, clause 8.24(a) complete all as specified and directed. 22 S&F of 35mm thick factory made modular designer flush doors, solid core construction, with block board core and prelamination on both sides, complete all as specified and directed. 23 S&F of 200 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed with screws, complete all as specified and directed. 24 S&F of 150mm long mild steel pressed handles, oval type, stove enamelled black and fixed withscrews, complete all as specified and directed. 25 S&F of 300mm long mild steel, sliding door bolt plate type, stove enamelled black, with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts, complete all as specified and directed. 26 S&F of 100mm butt hinges medium weight cold rolled mild steel ISI marked and fixed with mild steel wood screws or welded to angle frame, complete all as specified and directed. 27 S&F of mild steel ordinary rat tail rod pattern springs of size 300mm including roller and roller plate complete all as specified and directed 28 M&L for preparing new or previously untreated surfaces of wood or wood based materials of any description not otherwise described exc 10 cm width or girth and applying two coat of synthetic enamel paint on a coat of primer and layer of putty/filling material to get smooth & level finish, complete all as specified and directed. 29 M&L for box type steel window with 80x40x1.25 m MS tubular frame with side hung shutters ( double shutter for glass and gauze) without sash bars jointed together with and incl grill using12 mm square bar @ 10 cm C/C incl box type hinges with steel handle and steel pag stay complete glazing barsdoweled and welded complete all as specified as directed. Note:-(a)The Glass / gauze shell be measured and paid separately. (b) Side hung Z-Section shutter shall be of size 20mm x 20mm x 25mm and 0.3mm thick. 30 M&L for box type steel ventilator with 80x40x1.25mm MS tubular frame partly gauged with top hung shutter with and incl grill using 12mm square bars @ 10Cm C/C incl box type hinges with steel handle and steel pag stay complete glazing bars dovetailed and welded complete all as specified as directed. Note:-(a)The Glass / gauze shell be measured and paid separately. 31 S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane, including hacking out broken glass, complete all as specified and directed. 32 S&F 3mm thick sheet glass frosted/figuredandpin headedglazing with oil putty in squares not exc 0.5 Sqm in each pane, including hacking out broken glass,,complete all as specified and directed. 33 S & F in repairstainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed. 34 S&F in repair for SS 304curtain rod25mm diawith caps/lobs and wall mounting bracket cuttingin to length requiredat sitecomplete all as specified and directed by Eng-In-Charge. 35 Demolition of cement concrete of any description and in any position of WC’s/Bathroom etc in sunken portion area above ground floor, removing demolished material completely and old waste pipe from sunken portion and cleaning the side/bottom surface of sunken floor with wire brush, complete all as specified and directed. 36 M&L for application/forming of waterproofing liquid membrane moistening the prepared surface for proper dispersion and penetration and applying two component cementitious elastomeric water proofing coating damp block 2k as per manufacturers specifications. The treatment shall be carried out to the entire bottom surface and vertical surface upto the bottom height of wall tiles. Adequate curing to be done on vertical surfaces and ponding test for 48 hours on the bottom surface to be carried out complete all as specified and directed.Make :- M/s Asian paint, M/s fosroc, M/s Sikka, M/s BIS, M/S Berger or any E-in-Cs approved manufacturerNOTE :(a) Treatment shall be done through authorised applicator/representative of the manufacturer only.(b) Warranty for water proofing to be submitted by the contractor as per manufacturer norms 37 M&L for 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in padding levelling etc and roof kerbs with liquid water proofing solution finished even and fair with proper slope as prepatory works to water proofing treatment complete all as spd and directed by EIC.Note:-liquid water proofing solutionshall be provided in 150ml in 50 Kg of Cement by weight and cost of liquid water proofing solution measured andpaid seperate itemcomplete all as directed. 38 M&LPCC 1:5:10 Type E2 using 40mm graded stone aggregate as in mass filling in two layer in sunken portion complete all as spd and directed 39 M&L50mm dia G.Ipipe as in spoutto drain out ifany leakage occures in the sunken portion complete all as spd. 40 Supply only liquid water proofing compound, mixed in CM as per manufacturer instruction, complete all as specified and directed. Make : Dr Fixit LW or equivalent approved 41 Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed. 42 M&L for Non skid ceramic color tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exc 0.38 sqm (square / rectangular) as in flooring etc. set and jointed in neat cement slurry including spacer and filling material colouredto match over and15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and as directed. 43 M&L forNon - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete.all as specified and directed. 44 M&L forGlazed ceramic coloured tiles in vertical surface300mm X 600mm or 300mm x 450mm set and jointed in neat cement slurry and pointed in white or colour cement to match tiles with and including 10 mm thick rendering in CM (1:4) for receiving the tiles, complete all as directed. 45 S & F 15 mm bore Galvanized Steel tubes, medium grade with all fittings fixed to walls and ceilings or laid in floors, including taking down of pipe, complete all as specified anddirected. 46 S & F 20 mm bore Galvanized Steel tubes, medium grade with all fittings fixed to walls and ceilings or laid in floors, including taking down of pipe,complete all as specified anddirected.. 47 Dismantling water tanks RCC/ PVC any description and any size up to 1000ltr 0f capacity 48 S&F 500 litres capacity Rotational moulded polyethylene water storage tanks TRIPLE LAYER (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PVC float valve complete all as specified in SSR Part I. 49 S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks TRIPLE LAYER (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PVC float valvecomplete all as specified in SSR Part I . 50 Disconnecting existing tanks, settingaside (or lowering if required) for repairs, cleaning etc. and hoisting, reconnecting and re-fixing in position of exc. 250 litres & not exc. 500 litres capacity of tanks,Date of cleaning of tank will be marked on the tank by stencil with synthetic enamaled paint in uniform size, Size of letters & numbers should be 40mm. complete all as specified and directed. 51 Disconnecting existing tanks, settingaside (or lowering if required) for repairs, cleaning etc. and hoisting, reconnecting and re-fixing in position of 1000 litres capacity of tanks, Date of cleaning of tank will be marked on the tank by stencil with synthetic enamaled paint in uniform size, Size of letters & numbers should be 40mm. complete all as specified and directed. 52 S&F of PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors,incl taking down of eaves gutter and rain / waste water pipes including all fittings any size and pattern,complete all as directed. 53 S&F of PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors,,incl taking down of eaves gutter and rain / waste water pipes including all fittings any size and pattern,complete all as directed. 54 S&F 110 mm bore PVC (SWR) bends of any radius, complete all as specified and directed. 55 S&F 75 mm bore PVC (SWR) bends of any radius, complete all as specified and directed. 56 S&F 110 mm bore PVC (SWR) junction single (Single `T) equal or unequal, complete all as specified and directed. 57 S&F 75 mm bore PVC (SWR) junction single (Single `T) equal or unequal, complete all as specified and directed. 58 S & F PVC Floor trap of 75 mm outlet with grating including jointing to waste pipe in cement solvent complete all as specified and directed. 59 Providing and fixing Table Topwhite Vitreous China wash basinof specified size and model,32mm CP brass waste coupling,C.P brass pillar cock 15mm sizehaving long neck and Aerator, C.Pbrass bottle trap 32 mm size,extension pipes, wall flanges andconcealed G.I clamps completeincluding making necessary holes and other cutting in the countertop and fixing the wash basin,pillar cock rigidily including makinggood the walls wherever requiredall complete as per the architectural drawings and as directed by Engineer-in-Charge. Make of Wash Basin : Cat No.91097 of Hindware (390x390x150 Oval shape) or equivalent of approved makes. CP brass pillar cock Model No. 570012 of Hindare make or equivalent) C.P. Brass bottle trap (Model No. F85003 250X175 of Hindware make or equivalent) (The rate is inclusive of washbasin, waste coupling, pillar cock, bottle trap, brackets, all other fittings and accessories required for completion of work. For thepurpose of payment, only the number of wash basins provided and fixed in position shall be enumerated.). 60 Supply and Fix in repairs 10 Litres, PVC, valve less, syphonic action type, Flushing Cistern, high level, white inlet, ball valve, float, chain and pull, and brackets including PTMT PVC connection 600mm long. 61 S&F in replacement of 1st quality vitreous china squatting pan (IWC) Orissa pattern of size 580x440 mm, white colour with integral foot rests water closet including flush pipe but exluding flushing cistern, duly fixed in lime concrete bedding and making good of floor surface, complete all as directed. 62 S&F in replacement of 1st quality vitreous china ware European type WC with P or S type traps and same make plastic seat cover of white colour including flush pipe, fixing bolts etc and making good of the wall & floor surface, complete all as directed. 63 S&F in replacement ceramic One Piece Water Closet including slow falling seat cover and all necessary fittings of suitable size all as per Hindware cat part No 20107 (P-18/S-22)or equivalent as approved complete all as specified and directed. 64 S&F SS grating of square/round shape, overall size of 150x150mm with hinge type openable jali of 100 mm dia size with and incl fixing with CM to floor/nahani traps etc, complete all as specified and directed. 65 S&F of 600x450mm size and 4mm thick beveled edge looking mirror of selected quality glass, having PVC moulding/beading all around, mounted on 4mm thick PVC board, with and incl fixing accessories, complete all as specified and directed. 66 S & F in repairs 15 mm bore Bib taps,cast copper alloy,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. 67 S & F in repairs 15 mm bore Bib taps long body fancy type cast copper alloy,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. 68 S & F in repairs 15 mm bore stop/angle cock fancy type,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. 69 S & F in repairs 15 mm bore concealed type stop cock fancy type,chromium plated with long sank crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. 70 S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. 71 S&F in replacement of Corner glass shelf 300 mm with Chromium plated bracket guard and railing and fixing accessories, complete all as specified and directed. 72 S/F in repair Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. 73 S&F in replacement of Brass CP connection 15mm dia and 45cm long with 2 Nos brass check nuts with washers for geyser, complete all as specified and directed. 74 S&F in repair of towel rail 20mm dia 600 mm long and wall bracket made of cast copper alloy, chromium plated, complete all as specified and directed. 75 S & F in repairs 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. 76 Dismantling for Stone slabs and tiles of any description or thickness in floors, aprons etc, laid dry and pointed in any mortar, complete all as specified and directed. 77 M&L for RCC1:2:4 B1 (Nominal Mix) (20 mm stone agg) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete , including demolition of RCC including necessary form work, complete all as specified and directed. 78 M&L for mild steel deformed TMT bars 5 mm To 10mm dia (as in reinforcement) cut to length, bent to shape require including cranking, bending spirally for hooking for column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as spd and directed. 79 M & L for machine cut granite (of any type) tiles 20mm thick, bedded and jointed in counter with gray cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including grinding, polishing and making hole in platform for gas pipe complete all as specified and as directed. 80 Providing and fixing 12 mm thickframeless toughened glass doorshutter of approved brand andmanufacture, including providing and fixing top & bottom pivot &double acting hydraulic floorspring type fixing arrangementand making necessary holes etc.for fixing required door fittings, allcomplete as per direction ofEngineer-in-charge (Door handle,lock and stopper etc.to be paidseparately).
