Tender For Repair Maintenance Of Certain Wooden Steel Furnitures Including Painting Polishing And Canning At Lekhapani Mil Stn Under Ge Lekhapani, Lekhapani-Assam

Tender For Repair Maintenance Of Certain Wooden Steel Furnitures Including Painting Polishing And Canning At Lekhapani Mil Stn Under Ge Lekhapani- 1 TABLE DINING 6 PERS 2 (a) Replacement of unserviceable Table top 18 mm thick particle board one side teak veneer finishbeaded with PVC beading 18x1.8mm all around the top complete all as specified and as directed. 3 (b) Replacement of table leg made of 2nd class hard wood all without damaging adjacent parts as per drawing complete all as specified and as directed. 4 (c) Replacement oflong railsmade of 2nd class hard wood without damaging adjacent parts as per drawing complete all as specified and as directed. 5 (d) Replacement ofshort railsmade of 2nd class hard wood without damaging adjacent parts as per drawing complete all as specified and as directed. 6 BED HARD STEEL OFFICER :- 7 (a) Removing unserviceable plywood top and supply & fixing 1974x900x12mm commercial BWR plywood complete all as per drawing and as directed. 8 (b) Replacement of 18mm pre laminated particle board old unserviceable foot boardof Bed hard steel , complete all as specified and directed. 9 (c) Replacement of 18mm pre laminated particle board old unserviceable head boardof Bed hard steel , complete all as specified and directed. 10 TABLE COMPUTER 11 (a) Replacement of unserviceable Table top 18 mm thick particle board one side teak veneer finishbeaded with PVC beading 18x1.8mm all around the top complete all as specified and as directed. 12 (b) Replacement of unserviceable key board tray with telescopic chanel as per drawing complete all as specified and as directed. 13 (c) Replacement of drawer made of 18mm thick particle board as per drawing complete all as specified and as directed. 14 (d) Replacement of unserviceable Table bottom 18 mm thick particle board with PVC beading 18x1.8mm all around the top complete all as specified and as directed. 15 (e) Replacement of unserviceable particle board self of 450mm x 250mm with PVC beading 18x1.8mm all around the top complete all as specified and as directed. 16 (f) S & F of bottom rubber shoe for table leg all as per drawing and as directed. 17 (g) Replacement of unsrerviceable knob and handle of dwarer as per drawing and as directed 18 CHAIR CB A SPECIAL WITH HAND REST :- 19 (a)S & F of new wooden plank hand rest of size 575 mmx255mmhard wood fix with screw and complete all as per drawing and as directed. 20 (b)S & F of new wooden plank hand rest of size 50 mmx300mmhard wood fix with screw and complete all as per drawing and as directed. 21 BED PLYWOOD TOP :- 22 (a) S & F of new head board made out of hard wood frame covered with 4mm thick (3ply) ply wood, teak face on one side & commercial other side, BWR grade by replacing old unserviceable head board of Bed ply wood topcomplete all as specified and directed. 23 (b) S & F of new foot board made out of hard wood frame covered with 4mm thick (3ply) ply wood, teak face on one side & commercialother side, BWR grade by replacing of old unserviceable foot boardof Bed ply wood top, complete all as specified and directed. 24 (c) Replacement of long rail of bed plywood top made out of 2nd class hard wood and complete all as per drawing and as directed. 25 (d)Replacement of short rail of bed plywood top made out of 2nd class hard wood and completed all as per drawing and as directed 26 (e) Replacement of leg made of 2nd class hard wood without damaging the adjacent parts all as per drawing complete as specified and as directed. 27 (f) Removing unserviceable plywood top and supply & fixing 6x3x12mm commercial BWR plywood complete all as per drawing and as directed. 28 SOFA SET 5 SEATER 29 (a) Replacement of old u/s /unhygienic cushion of size 560x530mm with 100mm thick 32 densitycushion, Make as approved. The best quality tapstry cloth cover duly stiched with provision of velcro to be provided to the cushion all around as approved and as directed. 30 (b) Repair to sofa chair for replacing unserviceable plywood seat complete all as specified and as directed. 31 (c) Repair to sofa chair for replacing unserviceable leg made of 2nd class hard wood for sofa with arm complete all as specified and as directed. 32 (d) Repair to sofa chair for replacing unserviceable back stiffiner made of 2nd class hard wood for sofa with arm complete all as specified and as directed. 33 (e) Repair to sofa chair for replacing unserviceable side stiffiner made of 2nd class hard wood for sofa with arm complete all as specified and as directed. 34 (f) Repair to sofa chair for replacing unserviceable arms rest made from 2nd class hard wood for sofa with arm complete all as specified and as directed. 35 PEG TABLE :- 36 (a) Replacement of unserviceable table top made of 18mm thick particle board of size 450x300mm one side teak veneer finish beaded with PVC beading 18x1.8mm all around the top complete all as specified and as directed. 37 (b) Replacement of leg made of 2nd class hard wood without damaging the adjacent parts all as per drawing complete as specified and as directed. 38 (c) Replacement of top rail made of 2nd class hard wood without damaging the adjacent parts all as per drawing complete as specified and as directed. 39 (d) Replacement of bottom rail made of 2nd class hard wood without damaging the adjacent parts all as per drawing complete as specified and as directed. 40 TABLE WRITING /WRITING MED 41 (a) Replacement of unserviceable Table top made of 18 mm thick particle board one side teak veneer finishbeaded with PVC beading 18x1.8mm all around the top complete all as specified and as directed. 42 (b) Replacement of table leg made of 2nd class hard wood all as per drawing complete all as specified and as directed. 43 (c) Replacement of drawer side made of 12mm thick Plywood, BWRgrade and 6mmplywood of the bottom all as per drawing complete all as specified and as directed. 44 (d) Replacement of shutter made of 18mm thick particle board, Exterior grade as per drawing complete all as specified and as directed. 45 (e) Replacement of stiffiner made of2nd class hard wood all as per drawing complete all as specified and as directed. 46 TEAPOY WOODEN :- 47 (a) Replacement of unserviceable top made of 18mm thick particle board one side teak veneer finish beaded with PVC beading 18x1.8mm all around the top complete all as specified and as directed. 48 (b) Replacement of leg made of 2nd class hard wood all without damaging the adjacent parts as per drawing complete all as specified and as directed. 49 (c) Replacement of top rail made of 2nd class hard wood all without damaging the adjacent parts as per drawing complete all as specified and as directed. 50 (d) Replacement of bottom rail made of 2nd class hard wood all without damaging the adjacent parts as per drawing complete all as specified and as directed. 51 TABLE DRESSING LADIES :- 52 (a) S & F of looking mirror of size 1220x380x5mm including taking down unserviceable timber beading shall be provided all around the edge of the mirror including fixing of ply wood 6mm BWR on the back side of mirror and shall be attached to wooden frame as shown in the drawing complete all as specified and as directed. 53 (b) S & F 1.5mm plastic laminated sheet to top of table dressing ladies with adhesive as shown in the drawing complete all as specified and as directed. 54 (c) Replacement of back of table dressing ladies made of 6 mm BWRplywood complete all as specified and as directed. 55 (d) Replacement of drawer made of 18mm thick particle board as per drawing complete all as specified and as directed. 56 (e) Replacement of unserviceable chromium plated knob as per drawing complete all as specified and as directed. 57 (f) Replacement of unserviceable glass shutter with alluminium chanel as per drawing complete all as specified and as directed. 58 (g) Replacement of unserviceable leg of made out 2nd class hard woodall as per drawing complete all as specified and as directed. 59 SOFA SET 4 SEATER 60 (a) Replacement of old u/s /unhygienic cushion of size 560x530mm with 100mm thick 32 densitycushion, Make as approved. The best quality tapstry cloth cover duly stiched with provision of velcro to be provided to the cushion all around as approved and as directed. 61 (b) Repair to sofa chair for replacing unserviceable plywood seat complete all as specified and as directed. 62 (c) Repair to sofa chair for replacing unserviceable leg made of 2nd class hard wood for sofa with arm complete all as specified and as directed. 63 (d) Repair to sofa chair for replacing unserviceable back stiffiner made of 2nd class hard wood for sofa with arm complete all as specified and as directed. 64 (e) Repair to sofa chair for replacing unserviceable side stiffiner made of 2nd class hard wood for sofa with arm complete all as specified and as directed. 65 (f) Repair to sofa chair for replacing unserviceable arms rest made from 2nd class hard wood for sofa with arm complete all as specified and as directed. 66 TABLE 3’X2’ WITHOUT DRAWER (900X600X760MM) 67 (a) Replacement of unserviceable Table top 18 mm thick particle board one side teak veneer finish beaded with PVC beading 18x1.8mmall around the top as per drawing complete all as specified and as directed. 68 (b) Replacement of table leg made of 2nd class hard wood all as per drawing complete all as specified and as directed. 69 (c) Replacement of side stiffiner made of 2nd class hard wood all as per drawing complete all as specified and as directed. 70 (d) Replacement of bottom rail made of 2nd class hard wood all as per drawing complete all as specified and as directed. 71 (e) Replacement of drawer made of 12mm thick BWR plywood all as per drawing complete all as specified and as directed. 72 TABLE BED SIDE 73 (a) Replacement of unserviceable top made of 18 mm thick particle board,Exterior grade one side teak veneer finish beaded with 4mm thick timber all around the top complete all as specified and as diercetd. 74 (b) Replacement of table leg made of 2nd class hard wood all without damaging adjacent parts as per drawing complete all as specified and as directed. 75 (c) Replacement of shelves by fixing 12mm thick BWR plywood as per drawing complete all as specified and as directed. 76 TABLE CENTRE 77 (a) Replacement of unserviceable Table top made of 18 mm thick particle board one side teak veneer finishbeaded with PVC beading 18x1.8mm all around the top complete all as specified and as directed. 78 (b) Replacement of table leg made of 2nd class hard wood all without damaging adjacent parts as per drawing complete all as specified and as directed. 79 (c) Replacement of side stiffiner made of 2nd class hard wood all without damaging adjacent parts as per drawing complete all as specified and as directed. 80 (d) Replacement of long rail made of 2nd class hard wood all without damaging adjacent parts as per drawing complete all as specified and as directed 81 (e) Replacement of short rail made of 2nd class hard wood all without damaging adjacent parts as per drawing complete all as specified and as directed 82 TABLE DINING 4 PERS 83 (a) Replacement of unserviceable Table top 18 mm thick particle board one side teak veneer finishbeaded with PVC beading 18x1.8mm all around the top complete all as specified and as directed. 84 (b) Replacement of table leg made of 2nd class hard wood all without damaging adjacent parts as per drawing complete all as specified and as directed. 85 (c) Replacement of rails made of 2nd class hard wood timber hollock rest all without damaging adjacent parts as per drawing complete all as specified and as directed. 86 CHARPOY GI PIPE WITH NYLON NEWAR :- 87 (a) Taking out old warn out unserviceable newar from existing charpoy GI and tightning of Charpoy GI with pipe wrench andS&F Plywood 12mm , commercial ply, BWR grade as per IS 303 of size 1980x950mm. Plywood shall be fixed over three nos stiffeners of 25mmx25mm x16 gauge MS tubewelded parallel to the short rails in equal distance. 8mm dia round head countershank bolts and nuts with washer shall be used by drilling 2 holes on each stiffernes complete all as specifed and as directed 88 (b)Dismantling old broken/unserviceable long rail and S&F 32mm bore GI pipe medium grade, ISI marked as new long rail for GI Charpoy as per FD-220 including threading at both ends and provision of two check neuts of 6mm thick suitable for 32mm bore pipe complete all as specified and as directed.(Note : Each long rail shall be measured separately) 89 (c )Dismantling old broken/unserviceable short rail and replacing the same by using the GI Pipe obtained under dismantling of long rails by cutting into required size including threading at both ends for GI charpoy as per FD-220 complete all as specified and as directed.(Note : Each short rail shall be measured separately) 90 (d) Dismantling old broken/unserviceable legs and replacing the same by using the GI Pipe obtained under dismantling of short rails by cutting into required size including threading at one end for GI charpoy as per FD-220 complete all as specified and as directed.(Note : Each leg shall be measured separately) 91 (e )Dismantling old broken/unservieable 3 way elbow and provide 3 way elbow suitable for 32mm bore pipe (weight not less than 415gms) complete all as specified and as directed. 92 TABLE DINING 8 PERS 93 (a) Replacement of unserviceable Table top 18 mm thick particle board one side teak veneer finishbeaded with PVC beading 18x1.8mm all around the top complete all as specified and as directed. 94 (b) Replacement of table leg made of 2nd class hard wood all without damaging adjacent parts as per drawing complete all as specified and as directed. 95 (c) Replacement of long rails made of 2nd class hard woodall without damaging adjacent parts as per drawing complete all as specified and as directed. 96 (d) Replacement of short rails made of 2nd class hard woodall without damaging adjacent parts as per drawing complete all as specified and as directed. 97 CHARPOY HARD TOP STEEL 98 (a) Taking out old warn out unserviceable Plywood from existing charpoy steel and S&F Plywood 12mm , commercial ply, BWR grade as per IS 303 including black colour painting to all expoposed steel surface of charpoy with spary machine.Plywood shall be fixed over the cleats with nuts and botls with washer complete all as specified in drawing and as directed 99 TEAPOY VERANDAH :- 100 (a) Replacement of unserviceable top made of 18mm thick particle board of size 600X450mm with white finish beaded with PVC beading 18x1.8 mm all around the top complete all as specified and as directed. 101 (b)Removing of all dust and dirt/old paint etc by Paint Remover/Scraper, etc. from completer frame of Teapoy Varanda and prepare it painting and applying Two Coats of Synthetic Enamelled White Paint to complete Frameall as specified and as directed.. 102 (c) Provn ofwelding to the broken Joints/Parts of TEAPOY VERANDAH upto 4-6 joints including providing MS conduit pipe 19/20mm, 16 Gauge(upto the required length approx 610mm long to Each Chair duly fabricated) for replacing broken Parts and to complete the existing Chair Frame including its smoothening for repainting / recanning, complete all as shown in Drawing/as specified and as directed. 103 CHAIR VERANDAH 104 (a) Removing of all dust and dirt/old paint etc by Paint Remover/Scraper, etc. from completer frame of Chair Varanda and prepare it painting and applying Two Coats of Synthetic Enamelled White Paint to complete Frameall specified and as directed. 105 (b)Provn ofwelding to the broken Joints/Parts of CHAIR VERANDAH upto 4-6 joints including providing MS Conduit piper 19/20mm ,16 Gauge (upto the required length approx450mm long to each chair duly fabricated)for replacing broken parts and to complete the existing Chair Frame including its smoothening for repainting / recanning, complete all as shown in Drawing/as specified and as directed. 106 (c)Recanning of CHAIR VERANDAH closely with nylone newar 55mm wide, after removal of existing old unsv newar and including providing one coat of synthetic enamelled white paint to the existing Frame of CHAIR VERANDAH , complete all as shown in Drawing/as specified and as directed. 107 Taking out the existing old unserviceable wooden components without damaging adjacent part and S & Fnew wooden components made of 2nd class hard wood and complete as specified in drawing and as directed :- 108 CHAIR WRITING 109 (a)Front Leg 110 (b)Rear Leg 111 (c) Rail 112 (d) Stiffener 113 (e)Arms 114 CHAIR DINING 115 (a)Front Leg 116 (b)Rear Leg 117 (c) Rail 118 (d) Stiffener 119 CHAIR EASY 120 (a)Front Leg 121 (b)Rear Leg 122 (c)Rail 123 (d)Stiffner 124 (e)Arms 125 CHAIR DINING OFFICERS 126 Removal of old unserviceable cushioned seat and M & L for fixing of new cushion seat with foam 75mm thick , 40 density over 12mm ply board without damaging adjacent part as per drawing and complete all as specified and as directed. 127 (a)Front Leg 128 (b)Rear Leg 129 (c)Stiffner 130 RECANNING OF CHAIRS 131 Removal of unserviceable plastic cane from chairsand M&L for recanning of plastic cane half round type 2.0 to 2.5mm wide and border with 3.0 to 3.5mm plastic cane as approved in Godrej pattern all as specified and as shown in drawing/as directed. 132 (a) Chair Dining 133 (b)Chair Writing 134 (c)Chair Easy 135 (d)Chair CB A Special with Hand Rest 136 Preparation of following wooden furniture surfacess by applying one filler coat of Multani mitti, smoothing, rubbing with sand paper and polishing with two coats of french/sprit polish on exposed surface to achieve high glossy finish, complete all as directed by Engineer-in-charge. 137 (a) BedHardPly Top 138 (b) Almirah wooden Large with shelves 139 (c) Almirah wooden Med with shelves 140 (d) Book shelves open large wooden 141 (e) Table Dinning 6 Pers 142 (f) Table Dinning 8 Pers 143 (g)Table dining 4 pers 144 (h) Hat stand with mirror. 145 (j)Chair easy 146 (k) Chair writing 147 (l)Chair dining 148 (m)Chair dining long back 149 (n) Stool dressing 150 (o) Table bed side 151 (p)Table Peg. 152 (q) Table writing writing/Table writing medium 153 (r)Table Centre 154 (s) Teapoy wooden 155 (t) Table dressing ladies with mirror 156 (u)Table dressing gents with mirror 157 (v) Bin Soiled linen large & small 158 (w)Table 3 x 2 with Drawer. 159 (x)Table 3 x 2 without Drawer. 160 (y) Table office clk wooden 161 (z) Table office officer wooden 162 (aa)Table 3x3 163 (ab) Sofa Set 4 seater with cushion (Map) 164 (ac)Sofa Set 5 seater with cushion 165 (ad) Side board 166 (ae) Table 2x2x760mm 167 Preparation of surfaces of following steel fur byfilliing all holes and cracks or detoriated spots of old painted steel furnitureby applying oil putty and rubbing to make up smooth finished surfaces of both internally and exernally and applying two coats of synthetic enameled paint by spray comlete all as specified and directed by Engineer-in-Charge. 168 (a) Almirah steel large/ Almirah 1/2h 1/2S steel 169 (b) Alimrah steel med 170 (c) Table office clerk steel 171 (d) Table Office Officer steel 172 (e) Locker bed side steel 173 (f)Table Computer 174 (g) Bed Hard Steel 175 (h) Table Steel 3x3 176 (j) Rack Six Tear Steel

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	12-09-2024	AMENDMENT	BOQ	24-09-2024
2	24-09-2024	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	01-10-2024

INR 500 /-

INR 28000.0 /-

INR 14 Lakhs /-