Tender For Provision Of Thermoplastic Paint, Cat Eyes & Sign Boards.; 1 Laying and Jointing PVC Pipe. Heading 2 Fabricating, supplying and fixing Cautionary signs of 900 mm Eq. triangle side boards using super high efficiency, full cube retro-reflective – diamond grade DG3 type 9 sheeting of white colour bonded on 3mm Aluminum Composite Panel (0.25+2.50+0.25 - Pvdf Coated) over which alphabets and numerals are reverse cut made using Electro Cutable Filmwith computerized cutting plotter. The board shall be with back support with MS Angle iron frame (35x35x5mm) duly riveted and mounted on vertical post made out of 65mm dia. chromium plated pipe having sufficient length to hold the signboard bottom height of atleast 2.25 meters (IRC 67-2001) from the top of the carriageway. Including necessary excavation for foundation (45x45x65cm M20) concreting /reveling, etc. necessary for fixing of the Board including powder coating to MS Structure inclusive of cost and conveyance of all materials, equipment, machinery and labor with all leads and lifts, loading and unloading charges necessary for successful completion of the work. 3 Fabricating, supplying and fixing Prohibitory / Mandatory Signs of 600 mm diameter circular boards using super high efficiency, full cube retro-reflective – diamond grade DG3 sheeting type 9 of white colour bonded on 3mm Aluminum Composite Panel (0.25+2.50+0.25 - Pvdf Coated) over which alphabets and numerals are reverse cut made using Electro Cutable Filmwith computerized cutting plotter. The board shall be with back support with MS Angle iron frame (35x35x5mm) duly riveted and mounted on vertical posts made out of 65mm dia chromium plated pipe having sufficient length to hold the signboard bottom height of atleast 2.25 meters (IRC 67-2001) from the top of the carriageway. Including necessary excavation for foundation (45x45x65cm M20) concreting /reveling, etc. necessary for fixing of the Board including powder coating to MS Structure inclusive of cost and conveyance of all materials, equipment, machinery and labor with all leads and lifts, loading and unloading charges necessary for successful completion of the work. 4 Fabricating, supplying and fixing Informatory Signs of 800 x 600 mm size boards using super high efficiency, full cube retro-reflective – diamond grade DG3TYPE 9 sheeting of white colour bonded on 3mm Aluminum Composite Panel (0.25+2.50+0.25 - Pvdf Coated) over which alphabets and numerals are reverse cut made using Electro Cutable Filmwith computerized cutting plotter. The board shall be with back support with MS Angle iron frame (35x35x5mm) duly riveted and mounted on two vertical posts made out of 65mm dia chromium plated pipes having sufficient length to hold the signboard bottom height of atleast 2.25 meters (IRC 67-2001) from the top of the carriageway. Including necessary excavation for foundation (45x45x65cm M20) concreting /reveling, etc. necessary for fixing of the Board including powder coating to MS Structureinclusive of cost and conveyance of all materials, equipment, machinery and labor with all leads and lifts, loading and unloading charges necessary for successful completion of the work. 5 Fabricating, supplying and fixing Informatory Signs of 800 x 600 mm size boards using diamond grade DG3 type ASTM Type9 retro-reflective sheeting of florescent yellow green colour bonded on 3mm Aluminum Composite Panel (0.25+2.50+0.25 - Pvdf Coated) over which alphabets and numerals are reverse cut made using Electro Cutable Filmwith computerized cutting plotter. The board shall be with back support with MS Angle iron frame (35x35x5mm) duly riveted and mounted on two vertical posts made out of 65mm dia chromium plated having sufficient length to hold the signboard bottom height of atleast 2.25 meters (IRC 67-2001) from the top of the carriageway. Including necessary excavation for foundation (45x45x65cm M20) concreting /reveling, etc. necessary for fixing of the Board including powder coating to MS Structureinclusive of cost and conveyance of all materials, equipment, machinery and labor with all leads and lifts, loading and unloading charges necessary for successful completion of the work. 6 Fabricating, supplying and fixing Shoulder Mounted Signs of 1200 x 2400 mm size boards usingsuper high efficiency, cube retro-reflective diamond grade DG3 type 9 sheeting of white colour bonded on 3mm Aluminum Composite Panel (0.25+2.50+0.25 - Pvdf Coated) over which alphabets and numerals are reverse cut made using Electro Cutable Filmwith computerized cutting plotter. The board shall be on single face with back support with MS Angle iron frame (35x35x5mm) duly riveted and mounted on two vertical postsof 65 mm chromuim plated having sufficient length to hold the signboard bottom height of atleast 2.25 meters (IRC 67-2001) from the top of the carriageway. Including necessary excavation for foundation (100x50x95cm M20) concreting /reveling, etc. necessary for fixing of the Board including powder coating to MS Structure inclusive of cost and conveyance of all materials, equipment, machinery and labor with all leads and lifts, loading and unloading charges necessary for successful completion of the work. 7 Fabricating, supplying and fixing INFORMATORY SIGN of 900 x 1200 mm size boards usingsuper high efficiency, cube retro-reflective diamond grade DG3 type 9 sheeting of white colour bonded on 3mm Aluminum Composite Panel (0.25+2.50+0.25 - Pvdf Coated) over which alphabets and numerals are reverse cut made using Electro Cutable Filmwith computerized cutting plotter. The board shall be on single face with back support with MS Angle iron frame (35x35x5mm) duly riveted and mounted on two vertical postsmade of 65 mm dia chromium plated having sufficient length to hold the signboard bottom height of atleast 2.25 meters (IRC 67-2001) from the top of the carriageway. Including necessary excavation for foundation (100x50x95cm M20) concreting /reveling, etc. necessary for fixing of the Board including powder coating to MS Structureinclusive of cost and conveyance of all materials, equipment, machinery and labor with all leads and lifts, loading and unloading charges necessary for successful completion of the work. 8 Providing & Fixing of3M Median Marker (MM) any colour. 9 Supply & fixing of circluar FRP deliniators of 2 foot hieght from ground level including excavation, concreting covered with micro prismatic retro reflective sheet. 10 Supply and pasting of 2 inch widthsize3M make diamond grade conspicuity retro-reflective sheet on vertical post of different structures like light poles, crash barrier etc. in KCB limits. 11 S/F delinator of MS pipe power coated, 75 mm NB B class having lenth 1.2 m fixed in required pccinciuding excavation ,removal of soil , curing etc. S/F diamond grade rectro reflective strip7.5 cm wide,3 no.of said coloures, weld mesh of required size weldto protect strip, top of pipe closed by ms sheet, complete 12 S / F Reflective Raised Pavement Marker (Studs) - Confirming to ASTM D4280-96 Extended Life Type, Nonplowable, Prismatic, raised, Reflective Pavement Markers with shanks,fix with approved chemicals ,witv nessary drilling to surface, complete. 13 Providing and applying hot applied Thermoplastic Road marking material with glass beads, extremely high skid resistant 2.5 mm. thick including application of primer coat (tack Coat) for binding on cement concrete / given road surface. All labour materials with special aggregates etc. as specified in MORTH Specifications 2001 (or latest) and carrying out the marking on any road in centre line & other lane markings, continuous or intermittent, 10 cm ,15 cm,20cm width & also pedestrian crossing stripes as well as spraying further quantitiy of glass beads of apropriate type uniformly into a mono-layer on to the hot paint line in quick sucession of the paint spraying operation at the rate of 250 cm per sq. mt. area etc.in WhiteColour. 14 Fabricating, supplying and fixing INFORMATORY SIGN of any size boards usingsuper high efficiency, cube retro-reflective diamond grade DG3 type 9 sheeting of white colour bonded on 3mm Aluminum Composite Panel (0.25+2.50+0.25 - Pvdf Coated) over which alphabets and numerals are reverse cut made using Electro Cutable Filmwith computerized cutting plotter. The board shall be on single face with back support with MS Angle iron frame (35x35x5mm) duly riveted and mounted on two vertical postsof 65 mm dia chromium plated having sufficient length to hold the signboard bottom height of atleast 2.25 meters (IRC 67-2001) from the top of the carriageway. Including necessary excavation for foundation (100x50x95cm M20) concreting /reveling, etc. necessary for fixing of the Board including powder coating to MS Structureinclusive of cost and conveyance of all materials, equipment, machinery and labor with all leads and lifts, loading and unloading charges necessary for successful completion of the work 15 Fabricating, supplying and fixing INFORMATORY SIGN of any size boards usingsuper high efficiency, cube retro-reflective diamond grade DG3 type 9 sheeting of white colour bonded on 3mm Aluminum Composite Panel (0.25+2.50+0.25 - Pvdf Coated) over which alphabets and numerals are reverse cut made using Electro Cutable Filmwith computerized cutting plotter. The board shall be on single face with back support with suitable aluminmum or MS Angle iron frameand fitted on wall at any height with necessary requisite scaffolding etc. inclusive of cost and conveyance of all materials, equipment, machinery and labor with all leads and lifts, loading and unloading charges necessary for successful completion of the work. 16 Fabricating, supplying and fixing Shoulder Mounted Signs of 1200 x 2400 mm size boards usingsuper high efficiency, cube retro-reflective diamond grade DG3 type 9 sheeting of white colour bonded on 3mm Aluminum Composite Panel (0.25+2.50+0.25 - Pvdf Coated) over which alphabets and numerals are reverse cut made using Electro Cutable Filmwith computerized cutting plotter. The board shall be on both faces with back support with MS Angle iron frame (35x35x5mm) duly riveted and mounted on two vertical postsof 65 mm chromuim plated having sufficient length to hold the signboard bottom height of atleast 2.25 meters (IRC 67-2001) from the top of the carriageway. Including necessary excavation for foundation (100x50x95cm M20) concreting /reveling, etc. necessary for fixing of the Board including powder coating to MS Structure inclusive of cost and conveyance of all materials, equipment, machinery and labor with all leads and lifts, loading and unloading charges necessary for successful completion of the work. 17 Fabricating, supplying and fixing INFORMATORY SIGN of 900 x 1200 mm size boards usingsuper high efficiency, cube retro-reflective diamond grade DG3 type 9 sheeting of white colour bonded on 3mm Aluminum Composite Panel (0.25+2.50+0.25 - Pvdf Coated) over which alphabets and numerals are reverse cut made using Electro Cutable Filmwith computerized cutting plotter. The board shall be on both faces with back support with MS Angle iron frame (35x35x5mm) duly riveted and mounted on two vertical postsof 65 mmdia chromium plated having sufficient length to hold the signboard bottom height of atleast 2.25 meters (IRC 67-2001) from the top of the carriageway. Including necessary excavation for foundation (100x50x95cm M20) concreting /reveling, etc. necessary for fixing of the Board including powder coating to MS Structureinclusive of cost and conveyance of all materials, equipment, machinery and labor with all leads and lifts, loading and unloading charges necessary for successful completion of the work. 18 Fabricating, supplying and fixing INFORMATORY SIGN of any size boards usingsuper high efficiency, cube retro-reflective diamond grade DG3 type 9 sheeting of white colour bonded on 3mm Aluminum Composite Panel (0.25+2.50+0.25 - Pvdf Coated) over which alphabets and numerals are reverse cut made using Electro Cutable Filmwith computerized cutting plotter. The board shall be on both faces with back support with MS Angle iron frame (35x35x5mm) duly riveted and mounted on two vertical postsmade of 65 mm dia chromium plated having sufficient length to hold the signboard bottom height of atleast 2.25 meters (IRC 67-2001) from the top of the carriageway. Including necessary excavation for foundation (100x50x95cm M20) concreting /reveling, etc. necessary for fixing of the Board including powder coating to MS Structureinclusive of cost and conveyance of all materials, equipment, machinery and labor with all leads and lifts, loading and unloading charges necessary for successful completion of the work.
