Tender For Interior Renovation Works In Purchase Department At Tnpl Unit I, kagithapuram-Tamil Nadu

Interior Renovation Works In Purchase Department At Tnpl Unit I; 1 SUPPLYING AND FIXING OF REFLECTIVE TYPE SUN CONTROL FILM TO GLASS PANELS INCLUDING SURFACE PREPARATION, CLEANING ETC., COMPLETE OF APPROVED QUALITY AND SHADE. 2 SUPPLY AND FIXING OF VERTICAL TYPE 100MM WIDE IMPORTED QUALITY VENETIAN BLIND OF SUITABLE SIZE AS PER INSTRUCTION OF APPROVED MAKE AND QUALITY NYLON HANDLE, TILTING ARRANGEMENT ETC., COMPLETE. 3 THROUGHLY CLEANING THE EXISTING PAINTED SURFACES OF WALLS USING BUFFERING MACHINE. SCRAP THE EXISTING PAINTED SURFACE AND DISPOSE THE SAME AS DIRECTED. RATE INCLUDES LABOUR CHARGES AND ALL OTHER INCIDENTIAL CHARGES ETC., COMPLETE AT ALL LEVELS. 4 THROUGHLY PREPARE THE SURFACES AND APPLY ONE COAT OF WALL PRIMER OF APPROVED MAKE OVER WALL PUTTY SURFACES AND APPLY TWO COATS OF ACRYLIC EMULSION IST QUALITY OF APPROVED COLOUR AND MAKE INCLUDING MATERIAL COST AND ALL CONSUMABLES LABOUR CHARGES, SCAFFOLDING ETC. COMPLETE AT ALL LEVELS. 5 SUPPLYING AND FIXING OF ARMSTRONG MAKE FALSE ROOFING WITH MINERAL FIBRE MICRO BOARD (WHITE) OF SIZE 600MM X 600MM X 15MM INCLUDING ALL NECESSARY SUPPORTING SUSPENSION GRID SYSTEMS FROM RCC CEILING, ETC., COMPLETE. TYPE:FINE FISSURE SEKTOR. 6 PROVIDING AND FIXING OF UPVC DOORS OF APPROXIMATE SIZE 1.50 M X 2.50 M WITH DOUBLE LEAF OPENABLE SHUTTERS. THE FRAME MADE OUT OF UPVC PROFILE SECTION OF SIZE 60MM X 38MM X 2.2MM THICK WITH SHUTTER FRAME OF STANDARD SECTION 2.2MM THICK. THE DOOR SHUTTER IN TWO PARTS, ONE PART COVERED WITH UPVC SHEET AND ANOTHER PART COVERED WITH 5MM THICK PLAIN GLASS INCLUDING FIXING OF HINGES, AUTOMATIC DOOR CLOSER, SCREWS, HANDLES, RUBBER BEADING ETC., COMPLETE. 7 PROVIDING WOODEN PARTITION USING 3 X 11/2 MALASIAN SAL WOOD FRAMES AT 2 0 INTERVALS BOTH DIRECTIONS VERTICAL AND HORIZONTAL TO A HEIGHT OF 8 6 UPTO BOTTOM OF CEILING AND FIX 6MM THICK BWR PLYWOOD ON BOTH SIDE OF FRAME WORK UPTO 86 DECOLAM SHEET TEAK MATT FINISH 1.20MM THICK OVER THE PLYWOOD BOTH SIDES TO MATCH WITH THE EXISTING AND PROVIDE GROOVES AT 2 0 INTERVALS. THE BOTTOM PORTION OF PLYWOOD UPTO 6 SKIRTING LEVEL SHALL BE PAINTED WITH ONE COAT OF PRIMER AND TWO COATS OF ENAMEL PAINT. 8 SCRATCHING THE EXISTING MICA SHEET AND FIXING OF 1 MM THICK LAMINATED MICA SHEET INCLUDING HEATEX SOLUTION AND ALL OTHER TOOLS & TACKLES REQUIRED FOR THE WORKS AS DIRECTED BY ENGINEER INCHARGE. THE MICA SHEET WILL BE SUPPLIED BY TNPL AT FREE OF COST. 9 SUPPLY OF STANDARD SOLID FLUSH WOODEN DOOR (SINGLE LEAF) OF SHUTTER 30MM THICK AND SIZE 900 / 1000 X 2100 MM. THE DOOR SHALL BE LAMINATED WITH 1 MM THICK MERINO / ARCHID LAMINATED SHEETS ON BOTH SIDES WITH APPROVED SHADE AND FINISH WITH VISION PANEL WHEREVER NECESSARY. THE RATE INCLUDES COST OF WOODEN FRAME FOR DOOR SHUTTERS, HARDWARES OF SS 304 HANDLES, HINGES, BRASS LOCKS AND LATCHES, DOOR STOPPER, AUTOMATIC DOOR CLOSER ETC., COMPLETE. 10 PROVIDING MANPOWER ASSISTANCE FOR ATTENDING MISCELLANEOUS CIVIL WORKS - CARPENTER.

INR 590 /-

INR 20000.0 /-

Refer document