Tender for 2- Upgradation/Beautification work of Delhi Road, PROPOSED UPGRADATION OF DELHI ROAD (FROM TRI-JUNCTION, ZERO POINT (PAKWARA)TO GANGAN RIVER) Sl. No. Item Description 1 Dismantling reinforced cement concrete or reinforcement brickwork including stacking of materials as directed by the Engineer in charge within a distance of 60 mtrs or (200 feet). SI NO. 694/2022-23 2 Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 1000 m (1km), stacking serviceable and unserviceable materials separately as per Technical Specification. Bituminous Course15.59 DSR/2021 3 Disposal of building rubbish/malba/similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 15.60/2021 4 Taking out existing CC interlocking Paver blocks from footpath / central verge, including removal of rubbish etc. disposal of unserviceable material to the dumping ground for which payment shall be made separately and stacking of servicable material within 50 metre lead as per direction of Engineer in charge 16.83/DSR 2021 5 EXCAVATION infoundation inordinary Soil ( Loam clay or sand ) including lift upto 1.5m lead upto 30.0 m& including filling wateringand rammingof excavated earth into the space between the building & sides offoundation trenches or into the plinth and removal& disposal surplus earthas directed by the engineer I/C within a lead of 30 m.from foundation trenches. SI NO. 251/ 2022-23 6 Cement concrete with 4cm gauge approved stone ballast coarse sand and cement in proportion of 8:4:1 including supplyof all materials, labours and T&P etc. required for proportion completion of work. SI NO. 281/2022-23 7 R.C.C. Work with cement-approved coarse sand and 2cm. gauge approved stone grit in the proportion of 1:1.5:3 in in R.C.C raft foundation and footing excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all materials, labour and T&P etc. required for proper completion of work. Binding wire to be supplied by the contractor free of cost. Including making of drip coarse. SI 287+283(A)-283/ 2022-23 8 R.C.C. Work with cement-approved coarse sand and 2cm. gauge approved stone grit in the proportion of 1:1.5:3 in R.C.C columns excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centering and shuttering etc. and supply of all materials, labour and T&P etc. required for proper completion of work. Binding wire to be supplied by the contractor free of cost. Including making of drip coarse. SI 289/2022-23 9 Mild steel or TMT Bars (Fe-500D grade ir higher) or HYSD bars or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) brought to required shape as necessary including bending for proper completion of the work and including supply of all steel. SI NO. 504/2022-23 10 Providing and fixing stainless steel ( Grade 304) railingmadeofHollowtubes,channels,plates etc., including welding, grinding, buffing, polishingandmakingcurvature(wherever required)andfittingthesamewithnecessary stainless steel nuts and bolts complete, i/c fixingtherailing withnecessaryaccessories& stainless steel dash fasteners , stainless steel boltsetc., ofrequiredsize,onthetopofthe floor or the side of waist slab with suitable arrangementasperapprovalofEngineer- incharge,(forpaymentpurposeonlyweightof stainless steel members shall be considered excludingfixingaccessoriessuchasnuts,bolts, fasteners etc.). 10.28/ DSR 2021 11 12 mm thick plaster with one part of cement and four part of approved coarse sand including supply of all materials labour and completion of work includng making of groove in plaster surface. SI NO. 584/2022-23 12 FinishingwallswithPremiumAcrylicSmooth exterior paintof required shade:Newwork(Twoormorecoatsapplied@1.67 ltr/10sqmoverandincludingprimingcoatof exterior primer applied @ 2.20 kg/10 sqm) Including white cement-based putty of average thickness 1mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 13.46.1/DSR 2021 13 Class-150brickworkin1:4cement and COARSE sand mortar in foundation and plinth includingsupplyofallmaterials,labourtools andplants,etc.Requiredforproper completetion of the work. S.I. No. 307A/2022 14 Providingandlayingatorneargroundlevel factorymadekerbstoneofM-25gradecement concreteinpositiontotherequiredline,level and curvature, jointed with cement mortar 1:3 (1 cement:3coarsesand),includingmakingjoints with or without grooves (thickness of joints exceptatsharpcurveshallnottomorethan 5mm),includingmakingdrainageopening wherever required complete etc. as per direction ofEngineer-in-charge(lengthoffinishedkerb edging shall be measured for payment). (Precast C.C.kerbstoneshallbeapprovedbyEngineer- in-charge). with 2 coat painting. MDA RATE Bond No. 2272/MDA/EE/2023 15 Earth work in cutting or in embankment of in ordinary soil, excavation to be in form of regular pits not excleeding 1/2 meter (20) depth and earth work in embankment to be in 20cm. (8) layers including ramming and dressing the surface to required levels and slopes and also including 1.50 M (5ft) lifts and 30M (100ft) lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with in 30M(100ft). distance as directed by E/I. CARTAGE DISTANCE 8KM.SI. NO. 253 (A) SOR 2022-23 16 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road rollerincludingmakinggoodtheundulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. SI No. 253-B - 253-A/2022 17 Constructionofgranular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desireddensity,completeasperspecifications and directions of Engineer-in-Charge. WithmaterialconformingtoGrade-II (size range53mmto0.075 mm)havingCBR Value- 25 As per Analysed Rate Based on MoRTH Specification 18 Providing & laying of interlocking concrete blockpavementhavingthickness80mmas per drawings and technical specifications (Red or yellow colour) SI. NO. 5(2)/2022-23 19 Providing, laying and spreading of graded stone aggregate (WMM) after mixing with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying with 1% OPC cement and 3.50% Emulsion in uniform single layer on sub base/subgrade and compacting with the road roller to achieve the desire densityAs per Analysed Rate Based on MoRTH Specification 20 Providing and applying primer coat with SS-2 grade bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.60kg/sqm using mechanical means.As per Analysed Rate Based on MoRTH Specification 21 Providing and applying tack coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.As per Analysed Rate Based on MoRTH Specification 22 Providing and laying dense graded bituminous macadam with higher capacity HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per centby weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.As per Analysed Rate Based on MoRTH Specification 23 Providing and laying bituminous concrete withhigher capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4per centof mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects.As per Analysed Rate Based on MoRTH Specification 24 Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. 16.62 DSR/2021 25 Same as above but for 5mm thick road marking strip (to read with spec. 16.62 DSR/2021) 26 Retro-reflectorised Traffic sign as per IRC-67-2012 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67- 2012 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mid steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from Intemational/Government Laboratory/ Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D 4956-00) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer/Client, if so desires. could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012. Legends, letters, numerals and borders etc should be as per MoRTH specification No-801.3.7 Proof of the same in form of government report shall be uploaded while quoting tender. LKO SOR CH-26 MoRTH 801 (8.4) 2020-2160 cm circular with definition plate (20cm x 60cm) 27 60 cm equilateral triangle with definition plate size(20cm x 60cm) 28 30cm x 90cm (Left/Right) Object Hazard 29 80mm x 60mm rectangular with definition plate(20cm x 60cm) 30 Aluminum-backed flexible prismatic sheeting shall be made of yellow colored flexible prismatic sheeting with non-metallic prismatic lens formed in a transparent, synthetic resin as retro reflective elements. This flexible prismatic sheeting shall have black and yellow stripes with aluminum backed flexible prismatic Type VI sheeting conforming to ASTM: D4956 . specifications and stanDSRds of coefficient of retro reflectivity, flexibility and impact resistance applicable for reboundable devices. This flexible prismatic sheeting shall have screen printed arrow/slant line pattern in black colour in a continuous roll format. Width of object marker shall be 300 mm.The rate shall include all materials, labour, T&P, transportation,installation and incidentals all complete as per direction of the Engineer-in-Charge. as per CH-26 SI. NO. 24 (IRC:79-2015) LKO SOR 2020-21 LKO SOR CH-26 MoRTH 801 (8.4) 31 Supply, fixing & erection of built up Cantilever Structure 2.40 m span comprising of one vertical posts of 7.30 M height made up of 200 mm NB medium class MS pipe and 4.85mm thick as vertical member welded with 10 mm MS plate at top & 10 mm MS plate at bottom fixing to vertical post as per structure design & drawing with one of steel primer and two coats of synthetic enamel plant and The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboratory/ Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer / Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67 upto date . Legends , letters , numerals and borders etc should be as per MoRTH specification No-801.3.7 . The work includes construction of RCCFoundation of size 0.60x0.60x1.20 m of required depth as per site condition for built up structure including Earth work in excavation 100 mm thick Lean Concrete in 1:3:6 cement coarse sand and 40 mm gauge stone ballast RCC M25 including supply and fixing of 25 mm dia Foundation Bolts 600 mm long as per provision of structure design including cost of reinforcement & shuttering. The lateral vertical clearances and complete. Installation work shall be as per relevant clauses of MoRT&H specification section 800 and IRC 67 upto date complete in all respect The Rates shall include cost of design fabrication, supply, transportation, Local shifting Erection of Signage structure using crane, inclusive of all T&P machine, material and labour required for proper completion of work as per direction of Engineer-in-charge. (Exclusive cost of G.S.T) as CH-26 SI. NO. 29 MoRTH-802 LKO SOR 2020-21 32 Supplying and fixing of RCC Benches Sofa model Complete.Bond No. 2745/MDA/EE/2023 33 Reflective Raised Pavement Markers (Cat Eye/ Road Stud)Supply and fixing of raised pavement marker with Made of Plastic body of RPM/ Road Stud shall be moulded from ASA (Acrylic Styrene Acrylonitrite) or HIPS (High-Imoact Polystyrene) or Acryloniitrite Butadien Styrene (ABS) or Any other suitable material approved by the Engineer. The Marker shall support a load of 13,635 kg tested in accordance with ASTM D4280. The Reflective panels shall consist of number of lenses contatning single or dual prismatic cubes capable of providing total internal reflection of the light entring the lens face. Lenses shall be mouled of methyl methecrylate conforming to ASTM D788 of equivalent. The slop or retro-reflecting surface shall preferably be 35+/-5 degree to base and the area of each retro-reflecting surface shall not be less than 13.00 sq.cm. the marker height shall not be less than 10 mm and shall not exceed 20 mm & Width shall not exceed 130 mm. The base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name, trade or other means of identification of the manufacture. epoxy installations, excess adhesive around the edge of the marker, excess adhesive on the pavement and adhesive on the exposed surfaces of the markers shall be immediately removed. The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. In addition, a two year warranty for satisfactory infield performance of the finished road marker shall also be given by the contractor who carries out the work of fixing of reflective road markers. In case the markers are displaced, damaged get worn out or lose their reflectivity compared to stipulated standards, the contractor would be required to replace all such markers within 15 days of the intimation from the Engineer, at his own cost. The rate shall include all materials, labour, T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge. RPM (with shank) LKO SOR CH-26 MoRTH 804 (8.35)-Suggestive 34 Place making area/(Statue, pots etc) As per attached detailed cost analysis 35 HORTICULTURE BOQRough dressing the trenched ground including breaking clods. 2.5 DSR HORT 2020 36 Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation.2.6 DSR HORT 2020 37 Fine dressing of the ground. 2.7 DSR HORT 2020 38 Supplying and stacking at site dump manure from approved source,including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) 2.4.1 Screened through sieve of I.S. designation 20 mm. 2.4.1 DSR HORT 2020 39 Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). 2.8 DSR HORT 2020 40 Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge 2.9 DSR HORT 2020 41 Duranta Golden, having ht.15 to 20 cm bushy shape with fresh and healthy leaves in 15 cm size of Earthen Pot / Plastic Pot. DSR 2021-6.12 Horticulture DSR 2020 42 Providing and stacking of Nerium oleander (kaner) dwarf of height 30-40 cm. in earthen pot of size 20 cm as per direction of the officer-in-charge. 8.51 DSR 2020 Horticulture 43 Providing and stacking of Bougainvillea Red, White, Yellow (Variety Butiana, Lady Mary Baring, Mahara, Mohan, Scarlet Queen, Variegated, 15 16 Glabra Formosa, Peruviana Odissi, Paratha, Subhra,Thimma, Spectabilis L.N Birla, Refulgence) of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer |in-charge. (Item No-9.4 DSR-2020) Horticulture 44 Providing and stacking of Iresine herbstii, of height 20-30 cm. full of 12 branches well developed in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.(Item No-6.17 DSR-2020) Horticulture 45 Providing and stacking of Cuphea chinensis (Golden) of ht. 20-30 cm 37 full of branches and healthy foliage in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. (Item No-6.10 DSR-2020) Horticulture
