|
| 1 | Paintingwithsyntheticenamelpaintofapprovedbrandand manufacture of required colour to give an even shade :One or more coats on old work. |
| 2 | Paintingwithsyntheticenamelpaintofapprovedbrandand manufacture to give an even shade :Two or more coats on new work |
| 3 | Applying priming coat :With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 4 | Applying priming coat :Withreadymixedredoxidezincchromateprimerof approvedbrandandmanufactureonsteelgalvanised iron/steel works |
| 5 | Finishing walls with water proofing cement paint of required shade :Oldwork (oneor morecoats applied @2.20kg/10sqm) [email protected]/10sqm complete including cost of Priming coat. |
| 6 | WHITE WASHING WITH LIME TO GIVE AN EVEN SHADE:OLD WORK ( ONE OR MORE COAT ) WITH LIME |
| 7 | 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) |
| 8 | 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand) |
| 9 | 6 mm cement plaster of mix :1:3 (1 cement: 3 fine sand) |
| 10 | Dismantlingoldplasterorskirtingrakingoutjointsandcleaningthe surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 11 | R.C.C. work in walls,includ attached pilasters,buttresses, plinth and string courses,fillets,columns,pillars,piers,abutments, posts and struts etc.up to floor five level excluding cost of centering, shuttering, finishing and reinforcement |
| 12 | Centeringandshutteringincludingstrutting,proppingetc.and removal of form for : Walls(anythickness)includingattachedpilasters, butteresses, plinth and string courses etc. |
| 13 | Centeringandshutteringincludingstrutting,proppingetc.and removal of form for : Suspendedfloors,roofs,landings,balconiesand access platform. |
| 14 | ReinforcementforR.C.C. workincludingstraightening,cutting, bending, placing in position and binding all complete. Cold twisted bars |
| 15 | Demolishingcementconcretemanually/bymechanicalmeans including disposal of material within 50 metres lead as per direction of Engineer - in - charge.1:3:6 or richer mix |
| 16 | DemolishingR.C.C.workmanually/bymechanicalmeansincluding stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 17 | Demolishingbrickworkmanually/bymechanicalmeansincluding stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 18 | Demolishingstonerubblemasonrymanually/bymechanicalmeans including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge:In cement mortar |
| 19 | Earthworkinexcavationbymechanicalmeans(Hydraulic excavator)/manualmeansinfoundationtrenchesordrains(not exceeding 1.5 m in width or 10sqm on plan) including dressing of sides and ramming of bottoms, lift up |
| 20 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6(1Cement:3coarsesand:6gradedstone aggregate 20 mm nominal size). |
| 21 | Randomrubblemasonrywithhard stone in foundationand plinthincludinglevelling up withcementconcrete1:6:12(1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with :Cement mortar 1:6 (1 |
| 22 | Constructing masonry Chamber 60x60x75 cm,inside with75class designationbrickwork incement mortar1:4(1cement:4coarse sand)for sluicevalve,withC.I.surfacebox 100mm.topdiameter, 160 mm bottom diameter an |
| 23 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100mmdiameter,1.8mlong completeas perstandard design.With F.P.S. bricks |
| 24 | STONE SOLING UNDER FLOOR INCLUDING FILLING VOIDS WITH STONE CHIPS AND SAND, RAMMING, WATERING AND CONSOLIDATING ETC. COMPLETE |
| 25 | BrickworkwithF.P.S.bricksofclassdesignation75in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 26 | Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) |
| 27 | Carriage of material by mechanical transport including loading, unloading and stacking:Lime, moorum, building rubbish:Lead 1 KM. |
| 28 | ProvidingandfixingG.I.pipes completewithG.I. fittingsincluding trenching and refilling etc. External work15 mm dia. nominal bore |
| 29 | ProvidingandfixingG.I.pipes completewithG.I. fittingsincluding trenching and refilling etc. External work20 mm dia. nominal bore |
| 30 | ProvidingandfixingG.I.pipes completewithG.I. fittingsincluding trenching and refilling etc. External work25 mm dia. nominal bore |
| 31 | Providingandfixingwhitevitreouschinapedestaltypewatercloset (EuropeantypeW.C. pan)withseatandlid, 10litrelowlevelwhite P.V.C. flushing cisternwith manuallycontrolleddevice,conforming to IS : 7231. |
| 32 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillartaps,32mmC.P.brasswasteofstandardpattern,including paintingoffittingsandbrackets,cuttingandmakinggoodthewalls wherever require |
| 33 | Providing andfixingwhite vitreous china flat back orwall corner type lippedfronturinalbasinof430x260x350mmand340x410x265mm sizesrespectivelywithautomaticflushingcisternwithstandardflush pipeandC.P.b |
| 34 | Providing and fixing soil, waste and vent pipes : 100 mm dia.Sand cast iron S&S pipe as per IS: 1729. |
| 35 | PROVIDING AND FIXING75 M.M. DIAMETER C.I. PIPE |
| 36 | Providing and fixing trap of self cleansing design with screwed down or hingedgratingwithorwithoutventarmcomplete,includingcostof cutting and making good the walls and floors :100 mm inlet and 100 mm outletSand cast iron |
| 37 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 38 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.100 mmSand cast iron S&S as per IS - 1729 |
| 39 | Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 40 | Providing and fixing brass stop cock of approved quality :15 mm nominal bore |
| 41 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe32 mm dia |
| 42 | ProvidingandfixinguplasticisedPVCconnectionpipewithbrass unions :45 cm length15 mm nominal bore |
| 43 | PROVIDING AND FIXING 500 LITRES CAPACITY SINTEX OR EQUIVALENT MAKE WATER TANK |
| 44 | PROVIDING AND FIXING FOUR LAYER 1000 LITRES CAPACITY PVC WATER TANK WITH TANK NIPPLE AND BRASS FLOAT VALVE COMPLETE |
| 45 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption\"s less than 0.08% andconformingtoIS:15622ofapprovedmakeinallcoloursand shades, laid |
| 46 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by EIC |
| 47 | Providingandfixing1mmthickM.S.sheetdoorwithframeof 40x40x6mm angle iron and3mmM.S.gusset plates at the junctions andcorners,allnecessaryfittingscomplete,includingapplyinga priming coat of approved s |
| 48 | Structuralsteelworkriveted,boltedorweldedinbuiltupsections, trusses andframed work, including cutting, hoisting, fixingin position and applying a priming coat of approved steel primer all complete: |
| 49 | PROVIDING AND FIXING OXIDISED M.S. SLIDING DOOR BOLTS WITH NUTS AND SCREWS ETC. COMPLETE. 300*16 MM. |
| 50 | ProvidingandfixingISImarkedoxidisedM.S.handlesconformingto IS:4992 with necessary screws etc. complete : 125 mm |
| 51 | PROVIDING AND FIXING OXIDISED M.S. TOWER BOLT (BARREL TYPE) WITH NECESSARY SCREWS ETC. COMPLETE: 150*10 MM. |
| 52 | PROVIDING AND FIXING FLY PROOF GALVANISED M.S. WIRE GAUZE TO WINDOWS AND CLERESTORY WINDOWS INCLUDING 62*19 MM BEADING OF SECOND CLASS TEAK WOOD.WITH AVERAGE WIDTH OF |
| 53 | REMENING GLASS PANES, WITH PUTTY AND NAILS WHEREVER NECESSARY:GLASS PANES WEIGHTING 7.5 KG/SQM |
| 54 | RENEWING GLASS PANES, WITH WOODEN FILLETS WHEREVER NECESSARY:GLASS PANES WEIGHING 10 KG/SQM |
| 55 | PROVIDING AND FIXING KAIL WOOD CHAMFERRED EDGE WOODEN BEADING 65X12 MM WITH M.S.SCREWS ETC. |
| 56 | PROVIDING AND FIXING PANELLED OR PANELLED AND GLAZED SHUTTER FOR DOORS, WINDOWS AND CLERESTORY WINDOWS INCLUDING BLACK ENAMELLED M.S. BUT HINGES WITH NECESSARY SCREWS. SECOND CLASS KAIL WOOD(35 MM THICK). |
| 57 | DISMANTLING WOODEN PARTITION WALL INCLUDING FRAME WORK, COMMERCIAL PLY, DOOR SHUTTER WITH BUTT HINGES, WOODEN BEADING ETC. COMPLETE, AS PER DIRECTION OF ENGINEER IN- CHARGE. LABOUR RATE ONLY |
| 58 | PROVIDING AND FIXING CIMMERCIAL PLY WOOD 6 MM THICK AS PER DIRECTIONS OF ENGINEER IN-CHARGE |
| 59 | PROVIDING WOODWORK INFRAMES OF FALSE CEILING, PARTITIONS ETC. SAWNAND PUT UP IN POSITION : SAL WOOD |
| 60 | P&F Precoated G.I profile /Trapezoidal profile sheets 0.50 mm (0.05%)TCT zinc coating 120 grams per sqm, in 240mpa steel grade, 5-7 microns epoxy primer & polyster top coating 15-18 micron, self drilling/ tapping screws (5.5-8x55mm) |
| 61 | P/F precoated galvanised steel sheets roofing accessories 0.50 mm(+0.50%) thickness. Zinc coating 120 grams per sqm, 240 mpa steel grade5-7 microns epoxy primer and polyster top coat 15-18 microns .(A) Ridges plain(500-600 mm) |
| 62 | DISMANTLING ROOFING INCLUDING RIDGES, HIP VALLEYS AND GUTTERS ETC. AND DEPOSITINGTHE SERVICABLE MATERIALS IN CENTRAL/SITE STORES AND INCLUDING DISPOSAL OF UNSERVICABLE MATERIALS WITHIN 50 M LEAD AS PER DIRECTION OF ENGINEER IN CHARGE. ASB |
