Tender For Work Of Widening And Strengthening Of The Stretch From Baba Kuti Intersection To Alankar Guest House (Length 2.34 Km) Via Sote Baba Mandir Is Being Carried Out Under Zone-03, 1 Main Road:: Earth work embankment in foundation and under plinth in ordinary soil including lift 1.5m & lead 30m bydirection of E/I & Cartage earth upto 3 km . etc all complete. 2 Construction of granual sub base (GSB) with well graded materails in uniform layer etc all complete. 3 Providing and laying tack coat with using bitmen pressure distributor @0.30 kg/m2 on granular surface cleaned with mechanical broom etc all complete. 4 Denge Graded Bituminous Macadam (DGBM) P/L dense graded bituminous macadam with 60-90 THP Type HMP producing an average output of 75 tonnes per hour crushed aggregates of specified grading premixed with bitumixed binder @4.5% by weight of total mix and filler transporting the hot mix to work site laying with hydrostatic paver finisher with sensor control to the required grade level and alignment rolling with smooth wheeled vibratory and random rollers to achieve the desired compaction as per MORTH specification clause NO 507 complete in all respect. 5 Sam 2 Layer 6 CGBM 7 Supply and fixing of reflective road features Solar Stude/Cat eye type ASTMD- 4280 etc all complete. 8 Painting of pavement with 2.5mm thick plastic thermoplast making paint in center line, side line, stop line, zebra line. 9 Divider:: Dismantling of flexible pavements & disposal of dismantled materials upto a lead of 100m, stacking serviceable & unserviceable materials separately as per technical Specification clause 202. By Mechanical of Bituminouse course. MORD -202(2.14) 10 Earth work in execavation in foundation and under plinth area lift 1.5 m lead 30 m with all charges complete. 11 Construction of granual sub base (GSB) with well graded materails in uniform layer etc all complete. 12 R.C.C work with 1:1.5:3 cement c/sand and stone ballast etc all complete. 13 Mild steel work in R.C.C work etc all complete. 14 Centeringand Shuttering including strutting, propping etc and removal of walls (any thickness) etc all complete. 15 12 mm thick plaster of mix 1:6 cement coarse sand etc all complete. 16 Providing and Applying of white cement based wall putty for making surface smooth etc all compete. 17 Providing and Applying of white cement based wall putty for making surface smooth etc all compete. 18 Mild steel or iron work for grill of fabricationwork including bending, cutting, welding etc all complete. 19 Painting or vernishing on iron work in small areas or new work with one coat of ready mix priming paint two coat of approved superior quality readymixedpaint of clear including supply of all materials, labour &T&P etc all complete 20 Disposal of surplus earth/ malwa upto 3 km etc all complete. 21 Footpath:: Earth work embankment in foundation and under plinth in ordinary soil including lift 1.5m & lead 30m bydirection of E/I & Cartage earth upto 3 km . etc all complete. 22 Construction of granual sub base (GSB) with well graded materails in uniform layer etc all complete. 23 P/L/J of 160 mm dia PVC pipe etc all complete. 24 Construction of PCC Block kerb & channel Drain etc all complete. 25 Supply & Laying Of 80mm thick rubber moulded interlocking tiles with local sand 25-40 mm thick etc all complete. 26 Providing and laying in cement concrete 4:2:1 of not less than strength of m 150 [stone ballast 4 (20 mm.normal size) :2 apprroved coarse sand : 1 cement] and curring complete including cost of formwork in foundation and floorsetc all complete. 27 Cement Bolard 28 Cement Bolard 29 Drain and Duct:: Dismentalingreinforcement cement concrete or Reinforcment brick work including stosking of materials as per directed by Engineer- in -Charge with in adistance of 60 mt. etc all complete 30 Dismentaling of brick work with cement mortor etc all complete. 31 Dewatering of Drain by pumpset etc all complete 32 Desilting of open nala in foul position all charges complete. 33 Earth work in execavation in foundation and under plinth area lift 1.5 m lead 30 m with all charges complete. 34 Providing and Laying of P.C.C. 1:6:12 cement, c.sand and 40 mm gauge brick ballast etc all complete. 35 Providing and laying RCC NP-3 900 mmdia hume pipe etc all complete. 36 Construction of M.H. Chamber 1.20x.1.20x1.50 etc all complete. 37 Laying, spreading and compaction of local screened sand n water logged location for construction of road embankment including all leads and liftscompleted job as per technical specification clause 305 and direction of Engineer etc all complete 38 R.C.C. work with cement approved c.sand and stone ballast in the proportion of 1:1.5:3 for slab etc all complete. 39 Mild steel or iron work in plain worksuch as reinforced concrete to required shape as necessary including binding for proper completion of work. 40 Centeringand Shuttering including strutting, propping etc and removal of walls (any thickness) etc all complete. 41 mild steel iron grill work 42 Disposal of surplus earth/ malwa upto 3 km etc all complete. 43 Lighting work :: Supply and fixing of 9 mtrGI Octagonal Pole of Approved make ( top dia 70 mm, 155 mm Bottom dia, & base plate 12 mm thick) having 3 mm thickness with Single Arm Bracket (1 Mt Length ) on RCC foundation including the cost of foundation, foundation bolts, exacavation & back filling & Required T&P etc all complete & WIRING WORK & LIGHT. 44 Semi high mast light 45 Construction of chauraha and Mural:: Earth work in execavation in foundation and under plinth area lift 1.5 m lead 30 m with all charges complete. 46 Providing and Laying of cement concrete 1:4:8 cement, c.sand and 40 mm gauge stone ballast etc all complete. SI 273 47 R.C.C. work with cement approved c.sand and stone ballast in the proportion of 1:1.5:3 for slab etc all complete. 48 Suplly & Fixing of Murals as per approved design & as per direction of E/I. Required T&P etc all complete. 49 R.C.C. work with cement approved c.sand and stone ballast in the proportion of 1:1.5:3 for slab etc all complete. 50 Providing and Applying of white cement based wall putty for making surface smooth etc all compete. 51 Finishing walls with Art painting approved brand on wall surface with all completion of work. 52 Supply and fixing of light pole with all fittings & LED Lights on RCC foundation including the cost of foundation, foundation bolts, exacavation & back filling & Required T&P etc all complete 53 Suplly & Fixing of Murals as per approved design & as per direction of E/I. Required T&P etc all complete. 54 Horticulture Work:: Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts 55 Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). 56 Supplying and stacking at site dump manure from approved source including carriage upto 1 km (manure measured instacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 4.75 mm. 57 Spreading of sludge, dump manure or/and good earth in requiredthickness (cost of sludge dump manure or/and good earth to bepaid separately). 58 Carrigae of manure upto 5 K.M. 59 Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge. 60 Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately) 61 Supplying & Stacking of Selection No.1/doob grass at site fresh & free from weeds having proper roots in green including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge. 62 Cutting of Hedge/Edge including removing of cut material, cleaning, hoeing of hedge/edge bed watering, manureing and applying insecticides and fungicides etc.(excluding the cost of material which shall be supplied by Per Sqm the department) and as per direction of officer in charge. 63 Providing and stacking of Foxtail palm of ht. 240-270 cm bottom girth 35- 40 cm well developed in big size HDPE bags as per direction of the officer-in-charge. 64 Anemone hybrid (3 in one) variety well developed with fresh & healthy Flower in full bloom in 25 cm Earthen Pot/Plastic Pot. 65 Polyalthia pendula (Ashok Pendula) height 180-195 cm. in gunny bag size 30 cm 66 Providing and stacking of Plumeria alba dwarf dwarf of height 90-105 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. 67 COST OF BORING PUMP SUBMERSIBLE 68 Extra Horticulture work at two places 69 elecrical Utility S.T. Pole ( SP-37) 9.5 Mtr 70 Stay set 16x1800 SWG 71 Stay insulator 72 Stay Wire 7/10 SWG 73 Earthing Complete 74 Earth Wire 7/16 SWG 75 Aerial Bunched Cable (3x120)+(1x195+(1x16) 76 Suspension clamp with eye hook 77 Dead end clamp with Eye hook 78 Holding Clamp For ST Pole 79 Piercing Connecto 120-25 mm 80 L.T. Bare Nuteral Connecto 120-25 mm 81 L.T. Cable 1x25mm 82 Distribution box Single phase with clamp set 83 Distribution box three phase with clamp set 84 Al. Lug. 25mm 85 LT Circuit 500/600A 86 L.T. Bracket 18 87 LT Cable 1X300 mm 88 LT Cable 1X400 mm 89 Nut & Bolts off size with washer 90 Loading, Carriage and unloading of ST poles including old & used S.T. Pole from store to work site or vice-versa. 91 Erection of Single S.T. Poleas per standard specification 92 Grouting of pole with cement brick ballast and coarse sand as per standard specification. 93 Making of pole plinth of 400 mm dia, 600 mm height (200mm underground) with C.C. in ratio 1:4:8 of cements, stone ballast and coarse sand including cost of materials. 94 Painting of Steel Tubular Pole with one coat of red oxide and two coats of first enamel Alm. Paint upto fuse set including cost of all materials. 95 Earthing of supports as per standard specifications. 96 Opening of H.T. Jumpers from the existing 3 Phase 3 Wire H.T. O.H. line for erection work. 97 Making of H.T. Jumpers from 3 Phase 3 Wire H.T. O.H. line for erection work. 98 Dismentalling of existing ACSR conductor 99 L/c for Dismentalling of Damaged S.T. Pole of very Critical Position with the help of crane after remaving all the accessories from damged pole and its all related wotk including digging of pit or by cutting with gas cutter. 100 Dismentaling of old XLPE /AB Cable cable from site as per reuirements 101 L/c for Fixing of stay rod and its erection and grouting by fitting of stay clamp. Stay wire and its proper binding and tightening etc. 102 Opening of LT jumpher from the existing 3 Phase 4 wire OH line 103 Making of LT Jumpers with 3 Phase 4 Wire OH line after erection of work 104 Taking out from drum or/and Loading, carriage and unloading of Aerial Bunched Cable from store to work site or vice-versa. 105 L/C for laying of AB cable with all accessories 106 Connecting of newly erected network with KESCo mains including testing, commissioning and energization of the same completely. 107 Carriage of all concerning stock materialfrom KESCo Store to site or vice-versa. 108 11 KV 3x185mm XLPE Cable 109 11 KV O/D Cable Box 3x185mm 110 11 KV Straight Through Cable Box 3x185mm 111 11 KV 3x70mm XLPE Cable 112 11 KV O/D Cable Box 3x70mm 113 ST Pole ( SP-55)11 mtr long 114 11 KV Pin Insulator 115 11 KV G.I Pin With Nut 116 StaySet 16X1800 mm 117 Stay insulator 118 StayWire 7/10 SWG 119 Earthing Complete 120 Earth Wire 7/16 SWG 121 11/0.4 KV , 250KVA Distribution Transformer 122 ST Pole ( SP-55)11 mtr long 123 Cost of 11 KV Fuse set 124 Cost of 11 KV T.P.M.O switch 125 MS Channel 100x50x6 mm 2.40Mtr ( 20No) 126 11 KV Pin Insulator 127 11 KV G.I Pin With Nut 128 M.S. Clamp 4½ (50x6mm) 129 M.S. Clamp 5½ (50x6mm) 130 C.I. Packing Pcs.4½ 131 C.I. Packing Pcs.5½ 132 ACSR Dog Conductor 133 11KV Disc Insulator 134 Disc fitting for Dog Conductor 135 Al. lug. 300mm 136 Al. lug. 400mm 137 LT Circuit 500/600A 138 L.T. Bracket 18 139 LT Cable 1X300 mm 140 LT Cable 1X400 mm 141 Nut & Bolts off size with washer 142 Loading, Carriage and unloading of ST poles including old & used S.T. Pole from store to work site or vice-versa. 143 Erection of Single S.T. Poleas per standard specification 144 Erection of Double pole structure as per standard specifications 145 Grouting of pole with cement brick ballast and coarse sand as per standard specification. 146 Making of pole plinth of 400 mm dia, 600 mm height (200mm underground) with C.C. in ratio 1:4:8 of cements, stone ballast and coarse sand including cost of materials. 147 Painting of Steel Tubular Pole with one coat of red oxide and two coats of first enamel Alm. Paint upto fuse set including cost of all materials. 148 Earthing of supports as per standard specifications. 149 Fabrication/modification of MS Item as per requirement of site 150 Fixing of MS Channel (100x50x6 )mm 2.4 / 2.8 mtr. Long/M.S. Angle /LT Brackets and as per Required size 151 L/c for Taking out 33kv and 11 kV 3x70 to 3x300 XLPE Cable/LT Cable except service cable from cable drum before laying and transportation of the cables from store to work site or vice-versa. 152 L/c for Laying ofXLPE cables of all sizes except service cables 153 Digging of Pit 2x2x1 mtr. for laying of cable through HDD Method. 154 With HDPE Pipe (Pipe Provided by Contractor) 155 Without HDPE Pipe 156 Making indoor/outdoor joints of 11 KV and 33 KV XLPE Cable where the cable is being laid. 157 Mounting of all types of cable box on pole as well as on H.T.P.B./Outdoor Metering Cubical/H.T.M.C. the work includes proper clamping of cable box on both ends with pipe provided by KESCo 158 Opening of H.T. Jumpers from the existing 3 Phase 3 Wire H.T. O.H. line for erection work. 159 Making of H.T. Jumpers from 3 Phase 3 Wire H.T. O.H. line for erection work. 160 Mounting of 33 kV/11 kV Pin/DISC Insulator 161 Dismentalling of existing ACSR conductor 162 L/c for Dismentalling of Damaged S.T. Pole of very Critical Position with the help of crane after remaving all the accessories from damged pole and its all related wotk including digging of pit or by cutting with gas cutter. 163 L/c for Dismantling of M.S. Channel/X-arm/Guarding angle 164 Dismentaling of old XLPE /AB Cable cable from site as per reuirements 165 L/c for Fixing of stay rod and its erection and grouting by fitting of stay clamp. Stay wire and its proper binding and tightening etc. 166 Opening of LT jumpher from the existing 3 Phase 4 wire OH line 167 Making of LT Jumpers with 3 Phase 4 Wire OH line after erection of work 168 L/C for laying of AB cable with all accessories 169 Connecting of newly erected network with KESCo mains including testing, commissioning and energization of the same completely. 170 Carriage of all concerning stock materialfrom KESCo Store to site or vice-versa. 171 Laying, stringing, tensioning and binding of ACSR Dog conductor for H.T. O.H. line 172 Chopping of tree branches lying in the route of over head HT/LTline touching the tree branches to the phase line conductor making fault to the feeder, for 3” to 18” dia or as per requirement of site. 173 Shifting ,Loading, carriage & unloading of distribution Transformers (upto 400 KVA) from store to site & vise-versa or from site to another site. 174 Erection of Distribution T/F on plinth/Double pole structure. 175 Fitting of L.T. D.B. by brackets & clamps on double pole structure & L.T. Cable Connection from T/F Cable to L.T.D.B. 176 Loading, Carriage and unloading of ACSR/ Panther Conductor from store to work site or vice-versa. 177 Connection of L.T. cable from L.T.D.B to L.T.O.H. 178 Jumpering of H.T.Lines from the existing HT O.H. line. 179 Jumpering of L.T. Lines from the existing LT O.H. line. 180 Erection of Drop out fuse set on Double Pole structure 181 Energizing and shifting of load on newly installed transformer from near over loaded transformer after construction of necessary LT OH Line. (If required) 182 Construction of T/F plinth, suitable for mounting of distribution transformer size of the plinth will be 1.2x1.2x1.2 meter solid with brick work. 75 mm thick C.C. in ratio 1:4:8 with cement, coarse sand and brick ballast laid on the base and 75 mm thick done on all the exposed sides to the plinth. 183 Fabrication, erection & grouting of T/F fencingof frame size 3x2.4 mtr. including cost of M.S. Angle size 40x40x5 and M.S. Flat size 35x5, fixing of welded steel wire fabric on steel frames by welding of 10 SWG wire fabric, including Painting fo two coats of paint on iron based surfaces with ready mixed paint to give bus green shade including cleaning of oil and dust. 184 L/c for Making 11 KV Straight Through joint including digging of pit upto 1.1 Mtr. Depth. 185 80 feet deep bore earthing including supply of GI pipe and 25x3 Strip 186 11 KV 3x185mm XLPE Cable 187 11 KV O/D Cable Box 3x185Sqmm 188 33 KV 3x300mm XLPE Cable 189 33 KV O/D Cable Box 3x300Sqmm 190 MS Clamp 6.5 191 MS Clamp 5.5 192 CI Packing 5.5 193 CI Packing 6.5 194 MS Clamp 4.5 195 G.I Pipe/old pole 3mtr long 196 MS Channel 100x50x50x5 197 Nut & Bolts off size with washer 198 Al. lug. 300mm 199 Loading, Fabrication and modifications of M.S. Items as per site requirement. 200 L/c for Taking out 33kv and 11 kV 3x70 to 3x300 XLPE Cable/LT Cable except service cable from cable drum before laying and transportation of the cables from store to work site or vice-versa. 201 L/c for Laying ofXLPE cables of all sizes except service cables in above digged trench 202 Digging of Pit 2x2x1 mtr. for laying of cable through HDD Method. 203 With HDPE Pipe (Pipe Provided by Contractor) 204 Without HDPE Pipe 205 Making indoor/outdoor joints of 11 KV and 33 KV XLPE Cable where the cable is being laid. 206 Mounting of all types of cable box on pole as well as on H.T.P.B./Outdoor Metering Cubical/H.T.M.C. the work includes proper clamping of cable box on both ends with pipe provided by KESCo 207 Carriage of all concerning stock material except mentioned above from Kesco. Store to site or vice-versa. 208 33 KV 3x300mm XLPE Cable 209 33 KV O/D Cable Box 3x300mm 210 33 KV Straight Through Cable Box 3x300mm 211 Al. lug. 300mm 212 Nut & Bolts off size with washer 213 Loading, Carriage and unloading of ST poles including old & used S.T. Pole from store to work site or vice-versa. 214 Dismentalling of existing ACSR conductor 215 Loading, Carriage and unloading of ACSR/ Panther Conductor from store to work site or vice-versa. 216 L/c for Taking out 33kv and 11 kV 3x70 to 3x300 XLPE Cable/LT Cable except service cable from cable drum before laying and transportation of the cables from store to work site or vice-versa. 217 L/c for Laying ofXLPE cables of all sizes 218 Digging of Pit 2x2x1 mtr. for laying of cable through HDD Method. 219 With HDPE Pipe (Pipe Provided by Contractor) 220 Without HDPE Pipe 221 Making indoor/outdoor joints of 11 KV and 33 KV XLPE Cable where the cable is being laid. 222 Mounting of all types of cable box on pole as well as on H.T.P.B./Outdoor Metering Cubical/H.T.M.C. the work includes proper clamping of cable box on both ends with pipe provided by KESCo 223 Opening of H.T. Jumpers from the existing 3 Phase 3 Wire H.T. O.H. line for erection work. 224 Making of H.T. Jumpers from 3 Phase 3 Wire H.T. O.H. line for erection work. 225 L/c for Dismentalling of Damaged S.T. Pole of very Critical Position with the help of crane after remaving all the accessories from damged pole and its all related wotk including digging of pit or by cutting with gas cutter. 226 L/c for Dismantling of M.S. Channel/X-arm/Guarding angle 227 Mounting of 33 kV/11 kV Pin Insulator 228 Connecting of newly erected network with KESCo mains including testing, commissioning and energization of the same completely. 229 L/c for Making 33 KV Straight Through joint including digging of pit upto 1.1 Mtr. Depth. 230 Carriage of all concerning stock materialfrom KESCo Store to site or vice-versa.
