|
| 1 | INTERNAL ELECTRIFICATION |
| 2 | S&F in repair down unserviceable and M&L for Submain wiring with two single core of 4.00 Sqmm and one single core of 4.00 sqmm as earth wire with multi stranded copper conductor cable PVC (FR) insulated unsheathed cable 1100 volts grade drawn through in PVC Conduit (ISI Marked) of size 20/25 mm dia and the conduits accessories as in repairs complete including making good the disturbed surface to match the existing surface, complete all as specified and directed by Engineer in Charge. |
| 3 | M&L for Concealed Point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathedcable 1100 volts grade drawn through and including non metallic rigid PVC conduit,medium grade minimum 19/20/25mm dia ISI marked and conduit accessories fixed concealed in wall/ceiling/roof etc with sunken type pressed steel/welded MS terminal boxes made out of 1.6 mm MS sheet, 3mm thick laminated sheath top cover for mounting of fittings,switches,sockets outlets,regulators etc complete including provisining of 1.5 sqmm PVC insulatedunsheathedcable 1100 volt grade with multi stranded copper conductor to common earth and connected to earth dolly for the following complete all as specified and directed by Engineer in Charge. |
| 4 | All as above Item No 3 One lightpoint, ceiling fan/Exhaust fanpoint controlled by one switch 6 Amp one way, complete all as specified and directed by Engineer in Charge. |
| 5 | All as Item No 4above butbell point controlled by one switch 6 Amp one way, complete all as specified and directed by Engineer in Charge. |
| 6 | All as item no 4 above but one 3 Pin Socket5/6 Amp on the same board, complete all as specified and directed by Engineer in Charge. |
| 7 | All as item no4 above but one 3 pin Socket5/6 Amp on the independent board, complete all as specified and directed by Engineer in Charge. |
| 8 | All as per item No 3 here in before but point wiring with 2.5 sqmm single core multi stranded copper conductor PVC insulated & unsheathed cable 1100 volt grade and 1.5 sqmm PVC insulated and unsheathed cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 Amp multi purpose socket combination point on independent board, complete all as specified and directed by Engineer in Charge. |
| 9 | S&F in repairs switch piano flush type single pole 1 way 6 A,complete all as specified and directed by Engineer in Charge. |
| 10 | S&F in repairs switch piano flush type single pole 1 way 16 A,complete all as specified and directed by Engineer in Charge. |
| 11 | S&F in repairs socket outlet 2 in 1, 3 Pin5 Amps, flush type complete all as specified and directed by Engineer in Charge. |
| 12 | S&F in repairs socket outlet 3 pin,15 Amps flush type complete all as specified and directed by Engineer in Charge. |
| 13 | S&F in repairs stepped type electronic fan regulator flush type complete all as specified and directed by Engineer in Charge. |
| 14 | S&F in repairs modular Switch 1 way 6 Amp, 1 module , complete all as specified and as directed by Engineer in Charge. |
| 15 | S&F in repairs in modular Socket Outlet 6 Amp 2/3 pin combined 2 module, complete all as specified and as directed by Engineer in Charge. |
| 16 | S&F in repair Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type univeralal L&T complete all as specified and as directed by Engineer in Charge. |
| 17 | All as per Item No 16 above but for3 pin 5A complete all as specified and as directed by Engineer in Charge. |
| 18 | S&F in repair of LED lights fitting 1x 22 W, 220V, AC decorative box type with driver, holder includingLED tube light connecting up with three core flexiblecopper conductor cable of suitable size from ceilingrose complete all as specified and directed by Engineer in Charge. |
| 19 | Supply and fix in repairs 36/40 watt recessed mounted LED luminaire suitable for armstrong/grid ceiling with super bright LED fittings with connector block etc with short circuit protection , open protection , reverse polarity protection , high voltage protection complete with all accessories pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, complete all as specified and as directed by Engineer in Charge. |
| 20 | Supply and fixing LED street light fitting 35 Wat230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistantcomplete with driver, lamp bracket with impactand corrosion resistant including thermalmanagement in multiple optics complete withIP 65/66 protection complete all as specified and as directed by Engineer in Charge. |
| 21 | S&F in repairs 12 wattLED Bulb with base captype complete all as specified and directed by Engr in Charge. |
| 22 | Taking down existing aluminum/copperPoint wiring including wooden batten or taking out from existing complete (light/fan/socket) including all fittings such as ceiling rose, switches, regulators,sockets etc and making good distrubed surface of wall,floor & ceiling etc complete all as specified and directed by Engineer in Charge. |
| 23 | S & F in repairs Capacitor 2.5 mfd complete all as specified and directed by Engineer in Charge. |
| 24 | S & F in repairs Capacitor 3.5 mfd complete all as specified and directed by Engineer-in-charge. |
| 25 | S & F in repairs Capacitor 4mfd complete all as specified and directed by Engineer-in-charge. |
| 26 | S&F in repairs Tripple pole and neutral (TPN) 4 way MCB distribution box double door powder coated sheet metal encloser415 volts TPN including 200 Amps rated bus bar complete all as specified and directed by Engineer-in-charge. |
| 27 | S&F in repairs Single pole and neutral (SPN) 8 way MCB distribution box double door powder coated sheet metal encloser240 voltsincluding 200 Amps rated bus bar complete all as specified and directed by Engineer in Charge. |
| 28 | S&F in repairs of MCB single pole (SP) B curve240 Volt 6 to 32 Amp, rupturing capacity 10 KA complete all as specified and directed by Engineer in Charge. |
| 29 | S&F in replacement of LED light fitting 2x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as directed by Eng -in - Charge. |
| 30 | S&F in repairs of heating element 1.5 kW for 25/35 ltrs capacity geyser ISI marked (as approved) complete all as specified and directed by Engineer in Charge. |
| 31 | S&F in repairs of thermostatic switch of geyser complete all as specified and directed by Engr-in-charge. |
| 32 | S&F in repairs of LED lights fitting with 3 D effect double colour Blue and white , ceiling light15 to 20 Watt , 220V, AC decorativewith driver, holder includingLED lamp light connecting up with three core flexiblecopper conductor cable of suitable size from ceilingrose complete all as specified and directed by Engineer in Charge. |
| 33 | S & F in replacemnts ofceiling fanSupply and fixing ceiling fans complete with blades, down rods, electronic Bajaj, Polycab , L&T , regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) fan, complete all as specified and directed by Engineer in Charge. |
| 34 | S&F in replacements of Exhaust fan, steel bodyAC single phase230 v of size 300 mm sweep with blades and frame complete all as specifed and directed by Engineer in Charge. Note:Item will be deposit in MES store. |
| 35 | SUMMER APPLIANCES |
| 36 | Dismantling /taking down & M&L for servicing and repairs of Window /split ac 1.5/ 2 ton capacity for m, servicing complete , cleaning of evaporator coil, condenser , blower, base tray, drain hole, replacemtn of polypropelene pad, oiling of fan motor , checking of wiring connections, terminals capacitor , relay selector switches , drainage , rubber bushes bearing bushes ec and refixing athe same in position , and testing complete in full loadall as directed Note :Split Acs are installed at various floors in AF Station Bhisiana ie. Ground floor to 3rd floor . Contractor shall arrange his own arrangemnt to access the repairs for splitunits . No tools and plants shall be supplies to the contractor from the department |
| 37 | S&F running capacitor40/45/50/55/60 36/45 mfdsuitable for 1.5/.2 Ton capacity of window type AC fixed in replacementcomplete all as specified and as directed by Engineer-in-charge. |
| 38 | S&F in replacement fan blade for window/split ACof 1.5/2.0 TR all as specified and directed by engr-in-charge. ISI Mark or as per existing make and model, complete all as specified and as directed by Engineer-in-charge. |
| 39 | Supply & Fix in repair of single pole and neutral enclosure with, two pin and earth plug and socket 240 volts complete with one MCB 20/25 Amps including taking down existing all as specified and directed by Engineer-in-Charge. |
| 40 | Supply & Fix in repair of Blower motor single phase 230 volts, 50 Hz, 1/5 HP, 900 RPM suitable for window type AC of capacity 1.5/ 2.0 TR fixed in replacement complete all as specified and directed by Engineer in Charge. BIS Approved make or as per existingmodel |
| 41 | S&F Condensing coil (Copper coil) assembly complete suitable for window type/Split TypeAC of capacity 1.5/2 Ton etc complete and recharging the refrigerant R-22 and testing fixed in replacement complete all as specified and directed by Engineer in Charge.BIS/ISI Approved make or as per existingmodel |
| 42 | M&L for Cleaning the gas system with anti corrosive solution and recharging the refrigerant gas R-22/R-134a/R-410/R-32/R-407 with anti moisture substance and replacement of filter along with rectification of leakage system in the window type AC /Spilt type ac of capacity 1.5/ 2.0 Ton including installation at site and testing on full load complete all as specified and as directed by Engineer-in-charge.BIS/ISI Approved make or as per existingmodel |
| 43 | M&L for rewinding of blower motor of window type /Split type AC 1.5 Ton capacity single phase 1/5 HP, 900 RPM with super enameled copper wire of existing gauge including replacement of bush and nut and bolts, washer etc complete all as specified and as directed by Engineer-in-charge. |
| 44 | Taking down /dismantling of old unserviceabledefective Rotary compressor of capacity 2/1.5 TR of Split type/WindowAC and replacement in new rotarycompressor of cap 2/1.5 TR bysoldering /brazing of copper Tubes and replacement offoundation pads including nut& bolt and washers as required and charging with Refrigerant R-22/R-134a/R-410 to its rated capacityand testing of leakage in the system if any andmaking good, Testing on full load after reinstalling the same. ISI Mark or as per existing make and model |
| 45 | Taking down unserviceable & S&F thermostat suitable for split/window AC/refrigerator any capacity all as specified and directed by Engr-in-charge ISI Mark or as per existing make and model |
| 46 | S&F in replacement Oscilation motor with swing blade strip for indoor unit of split AC 1.5/2.0 TR capacity same specification /make as per existing one complete all as specified and directed.ISI Mark or as per existing make and model |
| 47 | Supply in replacement of Copper Pipe Line of size 1/4\" to 1/2\" for Split/Window type AC of any capacity complete all as specified and directed by Engr in charge. |
| 48 | Supply in replacement of Copper Pipe Line of size 3/8\"\" to 5/8\" for Split/Window type AC of any capacity complete all as specified and directed by Engr in charge. |
| 49 | Taking down unserviceable brass suction valve & supply & fix new suction valve 1/2\" suitable for cassette /split type .ISI/ BISMark or as per existing make and model |
| 50 | Taking down unserviceable brass discharge valve & supply & fix new brass dischargevalve 3/8\" suitable for cassette /split type complete all as specified and directed by Engineer in Charge. ISI Mark or as per existing make and model |
| 51 | Supply only in replacement of Brass flair nuts 1/2\"\" to1/4\"\" for Split/Window type AC of any capacity complete all as specified and directed by Engineer in charge. ISI Mark or as per existing make and model |
| 52 | S&F Fan motorfor Outdoor unit, of same specification as per existing one suitable for Split type AC of capacity 1.5 Ton fixed in replacement complete all as specified and directed by Engineer in Charge. ISI Mark or as per existing make and model |
| 53 | S&F in replacemnt Supply, installation,commis-sioning of Water cooler fully stainless steel, electric driven single phasehaving approx storage and nominal cooling 60/120 LTR complete all as specified and directed by Engineer in Charge. Make Voltas/Blue Star |
| 54 | Supply and fix in replacement complete PCB with Remote control for Outdoor unit of Split type AC cap. 1.5/ 2.0 TR, microprocessor based with transmission and receiving unit, cordless with features ofmode slection, timer, temperature control or as per existing specification and model complete all as specified and directed by Engineer in charge.ISI Mark or as per existing make and model |
| 55 | Attending day to day complaintof detecting the faultin Refrigerator/Water cooler/ Window AC/Split /desertCooler /Voltage stabilizer/ Electric supply in all eqpt like loose nut and bolts,leakage of tube,checking electrical connections,charging of refrigerant, fan motor,compressor fault etc all as specified and directed.Note:- (a) Any defective part which are required to be replaced to make functional ACs shall me measured and paid seperately. (b) The contractor should attend the complaint and rectify the defect within 02 days (Maximum) failing which RS @500 per day per AC (split / window 1.5 / 2TR ) /water cooler / Refrigerator will be recovered from the RAR/Final bill. |
| 56 | S&F in replacementBlower drumassembly complete for Split AC of 1.5/2.0 ton as per existing all as specified and as directed. ISI/ BIS Mark or as per existing make and model |
| 57 | M & L for complete maintenance and repairs of refrigerator of capacity 165 to 310 ltrs including servicing cleaning of refrigerator internal portion checking of compressor, condenser and replacement of overload relay, thermostat, capacitor, wiring,veg tray,chiller tray,strainer,freezer door and timer etc and testing complete all as directed. Notes of Item No. 1 to 4) do not paid separately.(i)Rates includes servicing of unit for one time and will be considered as one job. (ii)Rates are including for Spares required for replacement which is mentioned in servicing item no. (1 to 4) do not paid separately.(iii)Servicing shall be carried out in the presence of Engr-in-Charge or his representative.Necessary service report(complaint slip) is to be signed by the rep. of AGE E/M.(iv)Old spare parts retrived after replacement will be the property of the cotractor under schedule of credit and shall be removed by the contractor outside at his own cost. |
| 58 | Dismantling of defective compressor sealed unit of refrigerator from existing refrigerator by removing suction/ discharge line and providing new approved factory sealedcompressor of equal capacity given below (company re-oriented) flushing complete system with nitrogen gas pressure testing for leakages, vaccumisation of complete system and gas charging with F - 134/R22/407A including connection suction/ discharge line complete.165 to 310Ltrs capacity refrigerator. ISI Mark or as per existing make and model |
| 59 | Supply and fix Thermostat switch with defrosting system suitable for refrigerator of capacity 165 to310 Ltrsfixed in repairs complete all as specified and as directed by Engineer-in-charge. .ISI Mark or as per existing make and model. |
| 60 | Dismantling of defective compressor sealed unit of water cooler from existing foundation by removing suction/ discharge line and providing new approved compressor of equal capacity given below (company re-oriented) flushing complete system with nitrogen gas pressure testing for leakages, vaccumisation of complete system and gas charging with F - 134 R22 or as existing including connection suction/ discharge line complete.all as specified and as directed by Engr-in-charge, 40/80/60Ltrs capacity water cooler |
| 61 | Taking down unserviceable starting relay and supply and fix starting relay for water cooler cap 40/80/60/120/150 ltrs all as specified and as directed by Engr-in-charge .ISI Mark or as per existing make and model |
| 62 | Taking down unserviceable push cock & supply and fix new push cock 15mm dia of brass chromium plated suitable for water cooler any make/model Make Prayaj/Jaquor all as specified and as directed by Engr-in-charge. |
| 63 | DESERT COOLER |
| 64 | Taking down carefully desert coolers from various buildings and floors (viz. ground floor, first floor, second floor and third floor) at AF Station ,at Bhisina for repair and refixing after completion of necessaryrepairs. Note : Contractor shall make his own arrangements to access various floors and to provide tools and plants for taking down and refixing of desert cooler.The rate quoted shall be deemed to include all these arrangements all as required at site . |
| 65 | Dismantling of unserviceable wood wool pad and providing not less than 2.5 kg adequate dense newwood wool pad 03 Nos supported with suitable size GI wire & bamboo/wood stick for supporting of wool pad inside complete includingfitted with bolts and nuts suitable for existingdesert cooler as per sample |
| 66 | M&L for Preparation of old painted surface and applying DUCCO paint by spray gun fully matched with its existing colour outside and two coat of black bituminous paint inside the water cooler base/compressor compartment including removal of all dust and all foreign material with the help of sand paper and rubbing with cleaning compound and polishing on painted surface etc complete all as specified and as directed by Engineer-in-charge. |
| 67 | Taking out of unserviceable transperenct flexible PVC pipe of 15 mm dia and providing new PVCtransperenctflexible pipe of 15 dia , 03 branch minimum length 0.8 mtr long including clamp and of same quality for water circulation pump to air cooler all as specified and as directed. |
| 68 | Dismantling of unserviceable submersible water circulation pump assembly and providing of new submersible electric driven single phase 230 volts, 50 hz 20 watt water circulation pump, nut bolts, clamp, of head minimum1.6 Mtrfor desert cooler. Make:- ZOLTO/ Amickart,star universal.ISI Mark |
| 69 | Material and labour for rewiding of exhaust fan motor of desert cooler of size / capacity 4500 CFM Exhaust 1/6 HP1250 rpm including replacement of nut bolts, clamps . Note The cost shal be included taking down and re-fixing in existing location including clamp nut bolts etc. |
| 70 | Dismantling of unserviceable fan bladeand providing of new fan blade made out of aluminium casting suitable for existing desert cooler.make and model |
| 71 | Taking down unserviceable capacitor 4 MFD and S & F new capacitor 4 MFD, 220 Volts all as specified and as directed. |
| 72 | S&F control piano switch, flush type, 5 Amps suitable for existing desert cooler including taking down the old unserviceable switch all as specified and as directed. |
| 73 | S&F plug top, 3 pin, 5 Amps including taking down the old unserviceable plug top, all as specified and as directed. |
| 74 | Supply and fix water tray of size 95 cm x 75 cm and height 20 cm, made of GI sheet 0.63 mm thick suitable for desert cooler including taking out old unserviceable tray. |
| 75 | Taking down U/s desert cooler and supply, installation , testing , commissioning of desert cooler of capacity 4500 Cum per hour made out of 01 mm thick galvanised steel sheet with complete fully exhaust fan 450 mm sweep , 1400 rpm motorand suitablecapacity submersible pump and wood wool fitted in frame made from 25x25x3 mm angle iron and 25x25 mm size MS wire mesh net of 14swg dia fitted on both sides for supporting woodwool including suitable size top and bottom water tray made of 1.00 mm GIsheet 1000 watts speed control electronic regulator , suitbale size connection cable 3 core with copper conductor with moulded plug top , fan blade and all fixingaccessories complete all as specified and as direcdNote:- All electrical equipments shall be of ISI Marks |
| 76 | Taking down u/s and Supply and fix Exhaust fan motor with blade and frame heavy duty industrial exhaust fan (18 inch/450 mmwith IP 55 specification, rigid frame with rubber mounting for silent operation epoxy powder coated and better resistance to corrosion and acid alkali fumes , totally enclosed highly efficient copper wound motorincluding testing of motor, AC, 230/ 250 volts, Heavy duty and blades 450mm sweep, suitable for desert cooler of capacity 4500 CFM.Make :- CG,Havells or bajaj.Note The shall be included fixing of fan in side of desert cooler , clamp nut bolts, welding arrangement, etc |
| 77 | LT CABLES, EXTERNAL WATER SUPPLY. |
| 78 | Taking down electric motor 05 HP 415 voltcoupled to pump after disconnecting theelectrical connection, and earth connections from its foundation and transportation to work shop , checking the serviceability of ball bearing both side of motor , greasing of bearing up to free rotation of shaft of motorcomplete, greasing on reassemblying the motor to reinstallation on foundation, reconnecting back the cable and earth connections etc complete in all respect and starting the pump all as directed by Engineer in Charge. |
| 79 | Replacement ofU/S ball / roller bearing of above Item motor bearing of existing make with providing of high grade grease |
| 80 | M&L for opening pump set split case Monoblock/ Centrifugal type coupled to electric motor of capacity5 HP, make Kirloskar Compton from motor coupling after isolating the electric and earth lead connections opening the pump set for repair/overhauling & proper alignment of shaft etc including replacing the items with new items given vide item below,reassemblying the pumpsetgreasing connecting, testing and commissioning complete including necessary Lathe worksall as specified. |
| 81 | Supply only spare parts for 5 HP pump set for replacingvide item No. as follows:- |
| 82 | a) Supply only pump shaft sleeve made out of gun metal |
| 83 | b) Supply only key for main shaft |
| 84 | c) Supply only check nut |
| 85 | d) Supply only water seal |
| 86 | e) Supply only pump Shaft |
| 87 | f) Supply ball/roller bearing complete |
| 88 | f) Impeller cast Iron |
| 89 | M & L for Rewinding of pump motor 415 Volt 3 phase after disconnecting electric cable and eath lead, suction and delivery pipes, from 09 mtre depth of sewage well or pump house or any location directed by Engineer in Charge shifting to work shop, dismantling the motor assembly and removing the burnt out copper winding of stator and Rotar cleaning the stator slots and core assembly, rewinding to stator and rotar with suitable gauge super enamelled copper wire with insulating papers and insulation cloths, varnishing the winding and baking heatingfor achieving the required insulation resistance, re-assembling the motor and testing complete, incl transporting back to siteand fixing motor to its original place, reconnecting electric cable and earth leads etc testing and commissioning complete in all respect all as specified and as directed by Engr-in-charge for the following capacity: - |
| 90 | (a) 2 to 3 HP |
| 91 | (b)4 to 5 HP |
| 92 | Taking up or down Unserviceable GItubing/pvc and connection 40/50 mm size complete all as directed byEngineer in Charge. |
| 93 | Taking up or down Unserviceable GI tubing/pvc and connection 25 mm sizecomplete all as directed byEngineer in Charge. |
| 94 | Taking up or down Unserviceable GI tubing/pvc and connection 20 mm sizecomplete all as directed by Engineer in Charge. |
| 95 | Taking down Unserviceable CI/DI/GI Pipe of 80 mm diaincluding all fittings with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and as directed by Engineer in Charge. |
| 96 | Taking down Unserviceable CI/DI/GI Pipe of 100 mm diaincluding all fittings with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and as directed by Engineer in Charge. |
| 97 | Taking down Unserviceable CI/DI/CIPipe of 150 mm dia including all fittings with spigot and socket ends and lead joints including burning out joints and recovering lead all as specified and as directed. |
| 98 | Supply and laying 80 mm bores of tubes \"medium grade\" galvanised with all fittings and fixed complete laid in trenches all as specified and as directed by Engr-in-Charge. |
| 99 | Supply and laying 50 mm bores of tubes \"medium grade\" galvanised with all fittings and fixed complete laid in trenches. |
| 100 | Supply and laying 40 mm bores of tubes \"medium grade\" galvanised with all fittings and fixed complete laid in trenches. |
| 101 | Supply and laying 25 mm bores of tubes \"medium grade\" galvanised with all fittings and fixed complete laid in trenches/wall and ceiling or laid in floors. |
| 102 | Supply and laying 20 mm bores of tubes \"medium grade\" galvanised with all fittings and fixed complete laid in wall and ceiling or laid in floors. |
| 103 | Supply, laying, jointing and testingductile Iron Pipe , Class “K-7” ,150 mm diasocket and spigot push fit tighten joints in trenches, complete all as specifed and as directed by Eng-In-Charge. |
| 104 | Supply, laying, jointing and testingductile Iron Pipe , Class “K-7” ,100 mm diasocket and spigot push fit tighten joints in trenches, complete all as specifed and as directed by Eng-In-Charge. |
| 105 | M&L forCI fittingsfor Spigot & Socketed pipe as bends, tapers, tee pieces any tape angle/ radius and straight conection pieces etc upto 150mm dia pipes as in repair etc, complete all as specified and directed by Engineer in Charge. |
| 106 | S&F in repairs CI body Sluice Valve PN 1.6 conforming to IS of size 100 dia complete with nuts, bolts, rubber gaskets etc including, ISI marked, including jointing material such as rubber gasket, bolts, nuts, etc suitable for size 100 mm all as specified and as directed by Engr-in-Charge. |
| 107 | S&F in repairs CI body Sluice valve PN 1.6conformingto ISof size 150 dia complete with nuts, bolts, rubber gaskets etc including, ISI marked, including jointing material such as rubber gasket, bolts, nuts, etc suitable for size 150 mm all as specified and as directed by Engr-in-Charge. |
| 108 | Taking out Unserviceable and S&F CI body NRVof size 100 dia complete with nuts, bolts, rubber gaskets etc including jointing materials such as rubber, gasket, bolts, nuts etc suitable for size complete all as specified and directed by Engineer in Charge. |
| 109 | Taking out Unserviceable and S&F CI body NRVof size 80 dia complete with nuts, bolts, rubber gaskets etc including jointing materials such as rubber, gasket, bolts, nuts etc suitable for size complete all as specified and directed by Engineer in Charge. |
| 110 | Taking out Unserviceable and S&F CI body NRVof size 80 dia complete with nuts, bolts, rubber gaskets etc including jointing materials such as rubber, gasket, bolts, nuts etc suitable for size complete all as specified and directed by Engineer in Charge. |
| 111 | Taking out unserviceable and S&F new Gun Metal globe or gate valve (ISI marked), with Iron wheel head, screwed both ends, suitable for 50 mm bore iron pipe and fixed including testing complete all as specified and directed by Engr-in-Charge. |
| 112 | Taking out unserviceable and S&F new Gun Metal globe or gate valve (ISI marked), with Iron wheel head, screwed both ends, suitable for 40 mm bore iron pipe and fixed including testing complete all as specified and directed by Engr-in-Charge. |
| 113 | Taking out unserviceable and S&F new Gun Metal globe or gate valve (ISI marked), with Iron wheel head, screwed both ends, suitable for 25 mm bore iron pipe and fixed including testing complete all as specified and directed by Engr-in-Charge. |
| 114 | Taking out unserviceable and S&F new Gun Metal globe or gate valve (ISI marked), with Iron wheel head, screwed both ends, suitable for 20 mm bore iron pipe and fixed including testing complete all as specified and directed by Engr-in-Charge. |
| 115 | M&L for painting of centrifugal Pumps with motor alongwith 10 mtr pipe suction/delivery of capacity 5 HP with two coats of synthetic enamel paint , complete all as specified and directed by Engineer in Charge. |
| 116 | M&L for Cleaning of RCC Under Ground Tank Reserviour upto 25000 gallon capacity by drain out the contaminated muddy water from bottom surfaces of the tank by using of pump and motor and cleaning the inside and bottom surfaces of walls with help of wire brush and using specified dosage of Popttasium Permanganate and cleaned water than drain out completely material to the entire satisfaction of Engineer in Charge with and including writing letters 5 CM height capacity of Tank with synthetic enamel painton the other surface of the tank , complete all as specified and directed by Engineer in charge. |
| 117 | M&L for Cleaning of Overhead water reservoir 6000 gallon capacity on 25 metre staginf by cleaning entire internal surface remving dirt, sludge etc wire brush by applying bleaching powder and fresh water clean entire surface repeatedly with fresh water and draining out soiled water including Lime Washing inside the tank having capacity of sump and date of cleaning with white paint over black painted surface , complete all as specified and directed by Engineer in charge. |
| 118 | Taking out Unserviceable and M&L for run lead joints for 150mm dia spigot and socketed CI pipe fittings including spun yarn etc. complete all as specified and directed by Engineer in charge. |
| 119 | Excavation in trenches, not exc 1.5 mtr wide and not exc. 1.5 mtr in depth for foundation of poles/ stays/ cables/ pipe lines etc and getting out soft/ loose soil complete all as specified and as directed by Engineer in Charge. |
| 120 | M&L for returning filling in including spreading, levelling, watering and ramming in layers not exceeding 25 cm thick with earth obtained from excavation all as specified and as directed. |
| 121 | M&L for removal of surplus soil to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and as directed. |
| 122 | DG SET AND OTHER ALLIED WORKS. |
| 123 | Supply and replacing set of fuel pre- filters and fine -filters as per sample and make for 62.5 KVA capacity of DG sets. Each set shall be comprising complete set of pre and fine filters, complete all as specified and as directed by Engineer in Charge. .As per existing make and model |
| 124 | Supply and replacing set of fuel pre- filters and fine -filters as per sample and make for 20 KVA capacity of DG sets. Each set shall be comprising complete set of pre and fine filters, complete all as specified and asdirected by Eng-In-Charge.As per existing make and model |
| 125 | Supply and replacing Air filters as per sample and make for 62.5 KVA capacity of DG Set. Each shall be comprising complete set of air filters, complete all as specified and asdirected by Eng-In-Charge.As per existing make and model |
| 126 | Supply and replacing Air filters as per sample and make for 20 KVA capacity of DG Set. Each shall be comprising complete set of air filters, complete all as specified and asdirected by Eng-In-Charge.As per existing make and model |
| 127 | Supply and replace set of lube / engine oil filtersas per sample and make for the capacities of 62.5 KVA DG sets. complete all as specified and asdirected by Eng-In-Charge. |
| 128 | Supply and replace set of lube / engine oil filtersas per sample and make for the capacities of 20 KVA DG sets. complete all as specified and asdirected by Eng-In-Charge. |
| 129 | Material and labour for descaling and servicing the radiator of DG set 62.5 KVA internally and externally by using chemicals, including soldering the copper tubes and tank etc for arresting leakage, complete all as specified and asdirected by Eng-In-Charge. |
| 130 | Material and labour for descaling and servicing the radiator of DG set 20 KVA internally and externally by using chemicals, including soldering the copper tubes and tank etc for arresting leakage, complete all as specified and asdirected by Eng-In-Charge. |
| 131 | Material and labour for Drainthe out lived engine oil, clean the oil tank and Supply and filling the new engine oil grade 20W 40 as required, complete all as specified and asdirected by Eng-In-Charge. Make: SERVO, HP , India oil |
| 132 | Supply and filling coolent,complete all as specified and asdirected by Eng-In-Charge. ISI Mark |
| 133 | Supply and fixing in replacement of battery lead of copper conductor PVC insulated multi strand heavy duty , 1.25 Mtr long (two Nos) duly fixed with brassterminals and lugs 25x35mm complete all as specified and as directed. |
| 134 | Supply and fix in replacement of generator door hinges metal type with nut bolts or screws forDG setany make any type, complete all as specified and as directed. |
| 135 | Supply and fixing in replacementindicator lamps AC 230 V, LEDtype for the panel boards, complete all as specified and asdirected by Eng-In-Charge.ISI Mark |
| 136 | Supply and fixing in replacement Selector switch for volt meter/ ameter, complete all as specified and asdirected by Eng-In-Charge. |
| 137 | Supply and fixing in replacement under/over voltage relay input voltage 110-220 V AC suitable for AMF panel, complete all as specified and asdirected by Eng-In-Charge. |
| 138 | Supply and fixing in replacement engine starting relay DC 12V suitable forAMF panel,complete all as specified and asdirected by Eng-In-Charge. |
| 139 | Supply and fixing in replacement 8 pin relay Base Socket voltage range DC voltage 12 V to 24 V and AC voltage 230 V to 440V suitable forAMF panel, complete all as specified and asdirected by Eng-In-Charge. |
| 140 | Supply and fixing in replacement contact element NO-NCsuitable forAMF panel complete all as specified and asdirected by Eng-In-Charge. |
| 141 | Supply and fixing in replacement green colour Actuator Push button with complete set suitable for AMF panel, complete all as specified and asdirected by Eng-In-Charge. |
| 142 | Supply and fixing in replacement Red colour Actuator Push button with complete set suitable forAMF panel,complete all as specified and asdirected by Eng-In-Charge. |
| 143 | Supply and fixing in replacement Automotive relay, 12 VDC, 50 Amp power relay quick connected with complete set suitable forAMF panel, complete all as specified and asdirected by Eng-In-Charge. Make: L&T , C&S, Schnider , |
| 144 | Supply and fixing in replacementAmeter of range as requiredfor the Gen/ AMF panel, complete all as specified and asdirected by Eng-In-Charge. Make: L&T , C&S, Schnider , |
| 145 | Supply and fixing in replacement Volt meter 0 to 600 V range suitable for the Gen/ AMF panel, complete all as specified and asdirected by Eng-In-Charge. L&T , C&S, Schnider , |
| 146 | Supply and fixing in replacement3 pole power contactor 55 A,type MNX 40 CAT No. CS94190, complete all as specified and asdirected by Eng-In-Charge. L&T , C&S, Schnider , |
| 147 | Supply and fixing Battery Charger of capacity 12V suitable for AMF Panel, complete all as specified and asdirected by Eng-In-Charge.ISI Mark |
| 148 | M&L for repairing the self starter 12 Volts afterremoving from the Gen set of any capacity and transporting to an authorised sevice centre and back, |
| 149 | Supply and fixing in replacementheavy duty battery terminals, heavy duty brass forged with nuts and bolts, complete all as specified and asdirected by Eng-In-Charge. |
| 150 | Supply and fix in replacement fuel pipe filter to FIPwire braided complete all as specified and asdirected by Eng-In-Charge. |
| 151 | Supply and fix in replacement fuel pipeupto 15 mm size from fuel tank to the DG set & over flow return, complete all as specified and as directed. ISI Mark |
| 152 | Supply and fix in replacement Solonoid valve of 62/20 KVA DG sets complete all as specified and asdirected by Eng-In-Charge.BIS/ ISI Mark |
| 153 | Supply and install 180 AH, 24 V Maintanance free battery complete all as specified and asdirected by Eng-In-Charge. Make: Amaron, Exide , Lumnious |
