Bids Are Invited For Custom Bid for Services - Road repair and maintenance works at Aromatic Complex- SURFACE PREPARATION INCLUDING UPROOTING RANK VEGETATION CLEARING THE AREAS OF GRASS, VEGETATION, WILD GROWTH BUSHES, TREES AND PLANTS UP TO 30 CM GIRTH MEASURED AT A HEIGHT 1M ABOVE GROUND LEVEL FROM ROAD SIDE BERMS, UNDER SIDE OF PIPELINES, UNDER THE STRUCTURES, TANK FARMS, DRAINS ETC INCLUDING REMOVAL OF GRASS, PLANTS, AND RUBBISH ETC BY CUTTING WITH DARANT / SICKLE ETC. COMPLETELY NEAR TO GROUND LEVEL AS PER THE DIRECTION OF ENGINEER IN CHARGE AND COLLECTING ALL CUT GRASS, VEGETATION ETC AND BUNDLING IN TO HEAPS AND DISPOSIONG AT EARMARKED PLACES ONLY WITHIN A LEAD OF 2 KM WITH CONTRACTORS OWN TRANSPORT WITH ALL LOADS, TOOLS & TACKLES, LABOUR ETC COMPLETE AS PER STANDARD SPECIFICATIONS AND DIRETCTION OF ENGINEER INCHARGE. Bidder has to quote lumpsum for the quantities mentioned in Schedule of Works, excluding GST in GEM EARTH WORK IN EXCAVATION BELOW GROUND LEVEL FOR DEPTH UP TO LESS THAN 3.0 MTRS IN ALL KINDS OF WORKS IN ALL TYPES OF SOILS IN ANY WORK CONDITION BY MECHANICAL MEANS IRRESPECTIVE OF MAGNITUDE OF WORK, WORK PLACE, WORK SPACE, HEIGHT, DEGREE OF COMPLICATIONS, TEMPERATURE, GRADIENT INCLUDING REMOVAL OF VEGETATION, SHRUBS AND DEBRIS, CUTTING AND DRESSING OF SIDES IN SLOPES, LEVELING, GRADING AND RAMMING OF BOTTOMS, DEWATERING UP TO ANY EXTENT OF ACCUMULATED WATER FROM ANY SOURCE AND KEEPING THE SURFACE DRY FOR SUBSEQUENT WORKS, DISPOSAL OR STACKING OF EXCAVATED MATERIAL WITHIN A LEAD OF 200M, AS DIRECTED BY ENGINEER IN CHARGE, . ALL COMPLETE AS PER SPECIFICATIONS Bidder has to quote lumpsum for the quantities mentioned in Schedule of Works, excluding GST in GEM SCARIFYING THE EXISTING BITUMIN ROAD UPTO A DEPTH OF 50MM BY MECHANICAL MEANS ALL COMPLETE AS PER SPECIFICATIONS AND DIRECTION OF ENGINEER IN CHAGE. Bidder has to quote lumpsum for the quantities mentioned in Schedule of Works, excluding GST in GEM CONSTRUCTION OF GRANULAR SUB BASE OF 150MM THICK BY PROVIDING CLOSE GRADED MATERIAL , MIXING IN A MECHANICAL MIX PLANT AT OMC CARRIAGE OF MIXED MATERIALS TO WORK SITE , SPREADING IN UNIFORM LAYERS WITH MOTOR GRADER ON PREPARED SURFACE AND COMPACTING WITH POWER ROLLER TO ACHIVE THE DESIERED DENSITY COMPLETE AS PER MORTH SPECIFICATIONS 400-1 FOR GRADING I MATERIAL. Bidder has to quote lumpsum for the quantities mentioned in Schedule of Works, excluding GST in GEM PROVIDING , LAYING, SPREADING AND COMPACTING GRADED STONE AGGREGATE TO WET MIX MACADAM SPECIFICATIONS INCLUDING PRE-MIXING THE MATERIAL AT OMC IN MECHANICAL MIX PLANT CARRIAGE OF MIXED METHOD OF TIPPER TO WORK SITE , LAYING IN UNIFORM LAYER OF 200MM THICK PAVER IN SUB-BASE / BASE COURSE ON WELL PREPARED SURFACE AND COMPACTING WITH POWER ROLLER TO ACHIVE THE DESIRED DENSITY , COMPLETE AS PER MORTH SPECIFICATIONS 406. Bidder has to quote lumpsum for the quantities mentioned in Schedule of Works, excluding GST in GEM PROVIDING AND APPLYING PRIMER COAT WITH S.S. BITUMEN EMULSION ON PREPARED SURFACE OF GRANULAR BASE SUCH AS WMM INCLUDING CLEANING OF ROAD SURFACE AND SPRAYING PRIMER @ 0.60 KG/SQM USING MECHANICAL MEANS COMPLETE AS PER SPECIFICATIONS. Bidder has to quote lumpsum for the quantities mentioned in Schedule of Works, excluding GST in GEM PROVIDING AND APPLYING TACK COAT USING 80/100 GRADE BITUMEN (VG 10) ON THE PREPARED BLACK TOPPED SURFACES AT 2.5 KG PER 10 SQM, HEATING BITUMEN IN BOILER FITTED WITH SPRAY SET INCLUDING COST OF ALL MATERIAL, LABOUR, HOM COMPLETE AS PER SPECIFICATION Bidder has to quote lumpsum for the quantities mentioned in Schedule of Works, excluding GST in GEM PROVIDING AND LAYING DENSE BITUMINOUS MACADAM OF 50MM THICK WITH 100-120 TPH BATCH TYPE HMP PRODUCING AN AVERAGE OUT PUT OF 75 TONNES PER HOUR USING CRUSHED AGGREGATE OF SPECIFIED GRADING, PREMIXED WITH BITUMINOUS BINDER VG-30 AT 4.00 TO 4.5% BY WEIGHT OF TOTAL MIX FILLER, TRANSPORTING THE HOT MIX TO WORK SITE, LAYING WITH A HYDROSTATIC PAVER FINISHER WITH CENSOR CONTROL TO THE REQUIRED GRADE, LEVEL AND ALIGNMENT, ROLING WITH SMOOTH WHEELED, VIBRATORY AND TANDEM ROLLERS TOO ACHIEVE THE DESIRED COMPACTION AS PER MORTH SPECIFICATIONS CL NO. 507 WITH 60/70 GRADE BITUMEN. Total Quantity :
