Tender For Construction Work Of Asphalt Road In Front Of House Number 19/180 Situated In Babu Jagjivan Ram Ward., Lucknow-Uttar Pradesh

Tender For Construction Work Of Asphalt Road In Front Of House Number 19/180 Situated In Babu Jagjivan Ram Ward.; 1 Site visit and photograps 2 Raising of main hole 3 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m..(DSR2.8.1) 4 L.C 1:5:10 (1 Cement : 5 Coarse sand(Zone-III) derived from natural sourse :10 graded stone aggregate 40mm nominal size derrived from natural source (DSR 4.1.10) 5 Brick work with common burnt clay F.P.S(Non Modular) bricks of class designation 7.5 in foundation and plinth in (1:4 cement and mortar )including all material labour t&p complete .(DSR 6.1.2) 6 12 mm thick plaster in 1:4 ( 1 cement : 4 coarse sand ) over brick work including all material labour t&p complete (DSR 13.4.1) 7 Providing and laying damp-proof-course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone III) derrived from natural sourse :4 graded stone aggregate 12.5 mm nominal size derrived from natural sourse (DSR 4.10) 8 Providing, layíng, spreading and compacting stone aggregates of specific sizes 53 mm to 22.4mm to water bound macadam (G-3)specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 KN in stages to proper grade and camber, applying and brooming, stone dust to fill- up the interstices of coarse aggregate, watering and compacting thickness to the required density Grading -3 as per Technical Specification Clause 405.(AR) 9 Providing and applying primer coat withbitumen emulsion (SS-1) on prepared surface of granular base including clearing of road surface Jand spraying primer at the rate of 0.70 kg/sqm using mechanical means as per Technical Specification Clause 502.(AR) 10 Providing and applying tack coat with bitumen VG-10 using bitumen distributor at the rate of 0.35 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per Technical Specification Clause 503 11 Dense Graded Bituminous Macadam Grading 2 6 Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. (AR) 12 Bituminous Concrete Grading 2Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, |laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the |desired compaction as per MORTH specification clause No. 507 complete in all respects.(AR) 13 S/F sign board 14 S/F sign board

INR 590 /-

INR 5100.0 /-

INR 5.08 Lakhs /-