Tender for Hex Head Screw Full Thread With Eight Locking Plates To Use On 25 Kvac Elec. Locos As Per The Following Details. (1) Hex Head Screw Full Thread Size M18 X 45 Mm Long X 2.5 Mm 60 Detree Metric Pitch As Per Is: 1364, P Class 10.9. Qty./Set-1, Guntakal-Andhra Pradesh

Supply Of Hex Head Screw Full Thread With Eight Locking Plates To Use On 25 Kvac Elec. Locos As Per The Following Details. (1) Hex Head Screw Full Thread Size M18 X 45 Mm Long X 2.5 Mm 60 Detree Metric Pitch As Per Is: 1364, P Class 10.9. Qty./Set-1 No. (2) Locking Plate Size 75 Mm Long X 38 Mm Width X 1.5 Mm Thick As Per Is: 513/1994. Qty./Set-8 Nos. Drill Hole Of 18.5 Mm At A Distance Of 24 Mm From One End Of The Locking Plate On Horizontal Axis (With Reference To Length) And With Reference To Vertical Axis The Distance To Vertical Axis The Distance Will Be 19.00 Mm. Screw And Locking As Per Drg.No. C/Els/Kzj/Fstr/04/07. Plate Are To Be Zinc Plated As Per Is: 1573/1986.Hex Head Screw Full Thread With Eight Locking Plates To Use On 25 Kvac Elec. Locos As Per The Following Details. (1) Hex Head Screw Full Thread Size M18 X 45 Mm Long X 2.5 Mm 60 Detree Metric Pitch As Per Is: 1364, P Class 10.9. Qty./Set-1 No. (2) Locking Plate Size 75 Mm Long X 38 Mm Width X 1.5 Mm Thick As Per Is: 513/1994. Qty./Set-8 Nos. Drill Hole Of 18.5 Mm At A Distance Of 24 Mm From One End Of The Locking Plate On Horizontal Axis (With Reference To Length) And With Reference To Vertical Axis The Distance To Vertical Axis The Distance Will Be 19.00 Mm. Screw And Locking As Per Drg.No. C/Els/Kzj/Fstr/04/07. Plate Are To Be Zinc Plated As Per Is: 1573/1986.,Hex Head Screw Full Thread With Eight Locking Plates To Use On 25 Kvac El Ec. Locos As Per The Following Details. (1) Hex Head Screw Full Thread Size M18 X 45 M M Long X 2.5 Mm 60 Detree Metric Pitch As Per Is: 1364, P Class 10.9. Qty./Set-1 No. (2) Lock Ing Plate Size 75 Mm Long X 38 Mm Width X 1.5 Mm Thick As Per Is: 513/1994. Qty./Set-8 Nos. D Rill Hole Of 18.5 Mm At A Distance Of 24 Mm From One End Of The Locking Plate On Hori Zontal Axis (With Reference To Length) And With Reference To Vertical Axis The Dista Nce To Vertical Axis The Distance Will Be 19.00 Mm. Screw And Locking As Per Drg.No. C /Els/Kzj/Fstr/04/07. Plate Are To Be Zinc

Refer document

Refer document

Refer document