Repair And Maintenance Of Electrical, Sanitation And Other Works In Community Health Center At Block- Sunderpahari, Distt.- Godda --- 1 Wiring for light point/ fan point / exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular switch, modular plate, suitable GIbox etc as required. Group C 2 Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cablefor loop earthing as required. 3 Wiring for light/ power plug with 4X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 2 No 4 sq. mm FR PVC insulated copper conductor single core cablefor loop earthing as required. 4 2x1.5sq mm + 1x1.5 sq mm earth wire 5 2x2.5sq mm + 1x2.5 sq mm earth wire 6 4x2.5sq mm + 2x2.5 sq mm earth wire 7 4x10 sq mm + 2x6 sq mm earth wire. 8 Supplyinganddrawingco-axialTVcableRG-6grade,0.7mmsolid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/PVC conduit as required. 9 20mm dia 10 25mm dia 11 5/6 amps one way switch 12 15/16 amp one way switch 13 5/6 amp 3 pin socket outlet 14 5/16 amp 6 pin socket outlet 15 TV anteena Socket Outlet 16 Supplyingandfixingsteppedtypeelectronicfanregulatoronthe existing modular plate switch box including connections but excludingmodular plate etc. as required. 17 Supplyingandfixingmodularblankingplateontheexistingmodularplate & switch box excluding modular plate as required. 18 1 or 2 Module (78mm x 78mm x 45mm) - For Telephone & TV outlet. 19 4/5 Module (78mm x140mm x 50mm) 20 6 Module (78mmX205mmx50mm) 21 Supplying and fixing 2 pin 5 Amp Ceiling rose on the existing junction box/ wooden block including connection etc as required. 22 Supplyingandfixingbrassbatten/angleholderincludingconnection etc. as required. 23 Supplying and fixing Dingdong sound call bell single phase, 230 volts,complete as required. 24 Installation,testingandcommissioningofceilingfan,includingwiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable, etc. as required. 25 Installation of exhaust fan up 450 mm sweep in the existingopeningincludingmakingtheholetosuitthesizeofabovethefan, making good the damage, connection, testing, commissioning etc. as 26 Supplyingandfixing20amps,240volts,SPNindustrialtype,socket outlet,with2poleandearth,metalenclosedplugtopalongwith20 amps“C” curve,SP, MCB,in sheetsteelenclosure,onsurfaceor in recess,withchainedmetalcoverforthesocketoutletandcomplete with connections, testing and commissioning etc. as required. 27 8 Way (4+24), Double Door Horizontal Type 28 6 / 32 Amp Single Pole 29 40 Amp TPN 30 Supplying and fixingSingle pole blanking plate in the existing MCB DBcomplete etc. as required. 31 40 Amps 32 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke andsalt) as required. 33 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess forconnections etc. as required 34 Providingandfixing6SWGdiaG.I.wireonsurfaceorinrecessforloopearthingalongwithexistingsurface/recessedconduit/submain wiring/ cable as required. 35 4 core,16 sq.mm. 36 1 run of cable 37 Upto 35 sq. mm 38 4 X 16 sq. mm (28mm) 39 18 /20 W LED Round Down Light (Surface) 40 Bulk Head fitting with 9/10Watt LED. 41 10/12 W LED Tube Light 42 20/22 W LED Tube Light 43 SITCof 300mm(12)Exhaustfan(Metalbody)suitableforsingle phase230volts,50Hz.,ACsupplycompletewithmotor, louvers/shutters etc. complete as required.Make :-Usha/Crompton / Havells . 44 1200 mm ( 48) BLDC 5 Star rating 32W Ceiling Fan 45 SANITATION WORK Supplying, fitting and fixing vitreous white glazed earthen wareI.W.C. Of parry Hindustan or any other I.S.S. Approved make with 100mm H.C.I. P trap 15liters C.I. Pull and let go flushing cistern of names or other I.S.S. Equipment make, complete with all fittings,C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pert of vitreous white glazed earthenwere were footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less than 50grms, 15mmP.V.C. connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxideprimer etc. all complete as per specification and direction of E/I. (A) 580 mm long(a) With 10ltrlow level PVC cistern 46 ProvidingandfixingwashbasinwithC.I.rackets,15mmC.P.brasspillar taps, 32 mm C.P. brass waste of standard pattern, ncludingpainting of fittings and brackets, cutting and making good the walls wherever require WhiteVitreousChinaWashbasinsize550x400mmwithapairof15mmC.P. brass pillar taps 47 Supplying, fitting and fixing the following items complete with allmaterialsasperspecificationanddirectionofE/I.(a)glassshelfwithC.P. Brass rail.(i) 600X125mm glass shelf complete 48 Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260mmfromthe centre of the waste coupling 77 mmbreadth with25 mm minimum water seal, weighing not less than 260 gms. 49 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour weighing not lessthan 105 gms. 50 Providing & fixingPTMT towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealedfittings arrangement of approved quality and colour weighing not less than 88 gms 51 ProvidingandfixingC.P.brassbibcockofapprovedqualityconfirmingtoIS:8931 52 ProvidingandfixingC.P. brassanglevalveforbasinmixerandgeyser points of approved quality conforming to IS 8931 a) 15 mm nominal bore. 15 mm nominal bore 53 C.P. brass 54 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with sealring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes. 75 mm diameter 55 76 mm diameter 56 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming toIS : 5382, leaving 10 mm gap for thermal expansion. 110 mm 57 Single tee with door 110x110x110 mm 58 Bend 87.5° 59 Shoe (Plain 60 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete.75mmdia 61 110 mm dia 62 SUBHEAD-III(A): WATER SUPPLY INSTALLATIONSProvidingandfixingCPVCpipeshavingthermalstabilityforhotandcold watersupplyincludingallCPVCplainandbrassthreadedfittingsincluding fixing the pipe with clamps at 1.00 mt spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge.Internal work -Exposed on Wall20 mm nominal outer dia pipes 63 25 mm nominal outer dia pipes 64 32 mm nominal outer dia pipes 65 40 mm nominal outer dia pipes 66 50 mm nominal outer dia pipes 67 ProvidingandfixingCPVCpipeshavingthermalstabilityforhotandcold watersupplyincludingallCPVCplainandbrassthreadedfittingsincluding fixing the pipe with clamps at 1.00 mt spacing. this includes jionting of pipes andfittingswithonestepCPVCsolventcementandthecostofcutting chases and making good the wall same including testing of joints complete as per the direction of engineer inchargeConcealed work including cutting chases and making good the wall etc.15 mm nominal outer dia pipes 68 20 mm nominal outer dia pipes 69 25 mm nominal outer dia pipes 70 32 mm nominal outer dia pipes 71 Providingandfixinginposition 25mmdiametermosquitoproofcoupling ofapproved municipal design. 72 Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank,ISI:12701marked,withcoverandsuitablelocking arrangement andmakingnecessaryholesforinlet,outletandoverflowpipesbutwithoutfittings and the base support for tank. 73 OTHER WORKS SPREEDIND OF SLUDGE DUMP MANURE OR GOOD EARTH REQUIRED THICKNESS…. 74 PROVIDING AND FIXING NILGIRI / MAXOCIAN GRASS TURGF WITH EARTH 50MM TO 60MM EARTH 75 PROVIDING AND FIXING ARECA PALM PLANT 3 TO 4 FT WITH 3 TO 4 BRANCH…... 76 PROVIDING AND DISPLAYCROTON PETRA BANGOLRE PLANT 3 TO 4 FT WITH 3 TO 4 BRANCH…... 77 PROVIDING AND DISPLAY LIVIS TOA PALMPLANT 3 TO 4 FT WITH 3 TO 4 BRANCH…... 78 G.I BARBED WIRE FENCING 1.2 M HIGHT ( PROVIDING AND FIXING 1.2 MHIGH G.I BARBED WIRE FENCING WITH 1.8 M ANGLE IRON POST 40*40*6 MM EVERY 3 M C/C ….. 79 Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush door shutter in door and windowswith black board core blended with high qualityphenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. 80 Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercialmild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required anglethreshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded orrigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortarguards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primerafter pre-treatment of the surface as directed by Engineer-in-charge: 81 Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.) 82 Providing one coat of synthetic enamel paint of approved shade and make over old wooden surface including cleaning the surface after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. 83 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturers specification and direction of Engineer-in-charge 84 Providing and Fixing factory made uPVC door frame, made of uPVC exturded sections, of size 65 mm x 55 mm with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturers specification and direction of Engineer-incharge. 85 Supplying, fitting and fixing M.S. grill gate with M.S. grill made of 20X6mm M.S. flats or 16mm M.S. square bars fitted on 25X25X6mm M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. 86 Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I.With A grade white 15X15cm Tiles. 87 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete 88 GST @ 18% 89 Labour cess @ 1%
