Consumables For Manufacturing Technology Lab , Consumables For Manufacturing Technology Lab , Ehn Wood (12 × 1½ × 2) , Ms Flat 80 Mm × 50 Mm × 6 Mm , Ms Round Rod (Ø 25 Mm × 70 Mm) , Aluminum Round Rod (Ø 25 Mm × 50 Mm) , Aluminum Square Plate (100 Mm × 100 Mm × 10 Mm) , Cotton Waste , Grease , Sae 40 Oil , Soap Bar , Welding Gloves Leather , Welding Rodø 3.15 , Welding Shield , Doubleopen End Spannerset 6-32 , Double Ring Spanner Set 6-32 , Clamp Meter , Pipe Wrench 1.1/2 Feet , Pipe Wrench 2 Feet , Cutting Plier , Screw Driver ¾ Feet Set , Chisel 3/4 Feet , Claw Hammer , Hammer 1 Kg , Hammer 1/2Kg , Poker , Taparia Box Spanner Set , Allen Key Set “Mm” , Allen Key “Inch” , Tachometer , Compressor Mounting Bush , Flat Belt 2 Inch , 20 Mm Coir Rope , Copper Wire 1.5 Mm , Gi Sheet (Sheet Metal- 26 Gauge) 8 Feet × 4 Feet , 1 Inch Ball Valve (Threaded Ss Body) , ¾Inch Ball Valve (Threaded Ss Body) , ½ Inch Ball Valve (Threaded Ss Body) , Gi Threadedbarrel Nipple ( ½ Inch × 9 Inch) , Gi Threadedbarrel Nipple ( ¾ Inch × 9 Inch) , Gi Threaded Barrel Nipple (1 Inch × 9 Inch) , Gi Threaded T Joint 1 Inch , Gi Threaded T Joint ¾ Inch , Gi Threaded T Joint ½ Inch , Pvc (¾ Inch Elbow) , Pvc (1 Inch Elbow) , Pvc 1 Inch × ¾ Inch Reducer , Pvc ¾ Inch T Joint , Pvc ¾ Inch Coupling , Pvc ¾Inch Ball Valve Pasted , Pvc Pipe 1 Inch 6 Meter , Pvc Pipe ¾ Inch 6 Meter , Pvc ¾ Inch Water Tap , Pvc ½ Inch Water Tap , Foot Valve 1 Inch , Hss Drill Bit 6 Mm , Hss Drill Bit 8 Mm , Hss Drill Bit 10 Mm , 3D Printer Filament Wire Acrylonitrile Butadiene Styrene (Abs) , Injection Moulding-Granules- Acrylonitrile Butadiene Styrene (Abs), Nylon (Polyamide ),Polypopylene (Pp),Low-Density Polyethylene (Ldpe), High-Density Polyethylene (Hdpe) - 5Kg. Each (Total-25Kg.) , Polyurethane Pneumatic Hose 8 Mm× 5 Mm , Polyurethane Pneumatic Hose 10 Mm× 5 Mm , Brass Hex Connector ½ × ¼ , Hose Connector Fitting Press Type 8 Mm , Hose Connector Fitting Press Type 10 Mm , Tig Welding Electrode Ms 1.6 Mm , Tig Welding Gloves , Hole Saw Cutter 25 Mm – 80 Mm , Electric Bench Drilling Machine 480 Watts 220 Volts , Rechargeable Battery With Charger Aa With Four Battery , Adjustable Tap Wrench M1 – M12 , Tap 6 Mm, 8 Mm & 10 Mm- Each 2 Nos.(Total -06 Nos.) , Front Panel Mounting Should Consist Of Mimic Diagram With Dc Mcb, Fuses 2,Supply Indicators,Rpm Meter,Digital Voltmeters,Digital Ammeters,Bti 30 Terminals,3 Point Starter With Enclosure
