Bids Are Invited For TLMW62761846 INDEX SHELL FACE MILL CUTTER D50 MM, BORE D22 MM, L50 MM, Z= 6 WITH COATED CARBIDE HIGH F (Q3) , TLMW62761870 KEY FOR INSERT SCREW TLMW62761862. ITEM: TT15 OF KENNAMETAL OR EQVLT. N. STD: - SIZE: - D (Q3) , TLMW62761889 INDEX PARALLEL SHANK FACE MILL CUTTER D32 MM, SHANK D32 MM, OAL> = 100MM, Z= 4, WITH HIGH FE (Q3) , TLMW62761854 COATED CARBIDE HIGH FEED INSERTS WITH MIN 4 INDEXING FORTLMW62761846. ITEM XDPT 120508E (Q3) , TLMW62761862 INSERT SCREW FOR TLMW62761846 & TLMW62761854. ITEM: D4012T OF KENNAMETAL OR EQVLT. N. ST (Q3) , TLMW62761935 COATED CARBIDE INSERT, MIN 2 INDEXING FOR TLMW62761927. ITEM: XPNT16160308RF SP6519 OF K (Q3) , TLMW62761951 KEY FOR TLMW62761943. ITEM: TP8 OF KENNAMETAL, FS1483 OF WALTER OR EQVLT. N. STD: - SIZE: (Q3) , TLMW62761978 COATED CARBIDE INSERT FOR TLMW62761960, ITEM: ADET090330SR42 X500 OF KENNAMETAL, ADMT080 (Q3) , TLMW62761986 INSERT SCREW FOR TLMW62761960 & TLMW62761978. ITEM: F2505TP OF KENNAMETAL/FS1455 OF WALT (Q3) , TLMW62761994 KEY FOR TLMW62761986. ITEM: T7 OF KENNAMETAL FS1483 OF WALTER OR EQVLT. N. STD: - SIZE: - (Q3) , TLMW62762010 INDEXABLE D40 MM FACE MILL, BORE D16 MM, Z= 4, L= 40MM, APPROACH ANGLE 90DG (+ 0DG/- 0.25DG) , (Q3) , TLMW62762036 INSERT SCREW FOR TLMW62762010 & TLMW62762028. ITEM: D4010T OF KENNAMETAL/ FS2266 OF WAL (Q3) , TLMW62762044 KEY FOR TLMW62762036. ITEM: TT15 OF KENNAMETAL, FS2267 OF WALTER OR EQVLT. N. STD: - SIZE: (Q3) , TLMW62762052 INDEXABLE D80 MM FACE MILL, BORE D27 MM, Z= 8, L= 50 MM, APPROACH ANGLE 90DG(+ 0DG/-0.25 DG) (Q3) , TLMW62761927 INDEX BALL NOSE PARALLEL SHANK CUTTER, BALL D16 MM, SHANK D20 MM, Z= 2, WITH 2 EDGE BANANA T (Q3) , TLMW62761943 INSERT SCREW FOR COATED CARBIDE INSERT FOR TLMW62761927 & TLMW62761935. ITEM: FP3006T OF (Q3) , TLMW62762028 COATED CARBIDE INSERT FOR TLMW62762010. ITEM: SCMT09T308EN41 X500 OF KENNAMETAL, SDGT09 (Q3) , TLMW62761960 D12 MM INDEX PARALLEL SHANK END MILL WITH SUITABLE 2 EDGE PARALLELOGRAM/RECT. CARBIDE IN (Q3) Total Quantity : 28163
