Bids Are Invited For VLV, GT, FLNG, FF, CL150, A216GRWCB, 14IN , VLV, GT, FLNG, FF, CL150, A216GRWCB, 10IN , VLV, GT, FLNG, FF, CL150, A216GRWCB, 12IN , VLV, GT, FLNG, FF, CL150, A216GRWCB, 18IN , VLV, GT, FLNG, FF, CL150, A216GRWCB, 24IN - Sea Water ValvesSize : 14 InchBody : ASTM A 216 Gr WCBBonnet (Bolted) : ASTM A 216 Gr WCBStem (Rising): Bronze (No Casting)Wedge Disc (Solid) : IS 318 Gr.2 Leaded Tin BronzeBody seat Ring (Renewable/ non renewable) : IS 318 Gr.2 Leaded Tin BronzeStem Packing (Renewable with valve open on stream) : Graphited asbestos with sacrificial inhibitor & Inconel Wire reinforcementHandwheels (Non rising ) : Malleable Iron, Cast Steel, Ductile IronBonnet Bolts : ASTM A 193 Gr B7Bonnet Nuts : ASTN A 194 Gr 2HBonnet Gasket : IS 2712 Gr A/0Back seat & Shoulder : BronzeFace to Face Distance as per ASME B16.10All other specifications as per EIL Tag sheet : 51384 Internal Coating with GLASS FLAKE POLYSTER COATING: a. Surface preparation: Cu-slag blasting to SA 2 1/2 as per ISO 8501-1:2007 or SSPC-SP10 (min. surface profile of 50 micron). b. Supply and apply 2 Coats (each of 500 microns) of glass flake reinforced ambient cure polyester coating suitable for sea water application. Total DFT shall be 1000 microns. c. GLASS FLAKE POLYSTER coating material from M/s Kirloskar Brothers (product Corocoat-Polyglass HA) & M/s L & T (product Teroglass 60 CRC ) OR HPCL approved equivalent product from other reputed Manufacture meeting specifications mentioned in attached Spec sheet for internal lining of sea water valve material to be used. d. Area to be coated: Body, Bonnet internal & Disc of Valves; and components surface/s as per HPCL’s advice. For Quality Assurance, Tests like DFT & Spark Testing shall be carried out as per QAP. HT test Pressure (Body ) : 450 PSIHT test Pressure (Seat ) : 325 PSITest Pressure with Air : 80 PSIAgency to provide 2 sets of spare Bonnet gaskets along with Valve. Spare bonnet gaskets to be tied along with respective valve only. VALVE,GATE,FLANGEDFLANGE, FACING: FLAT FACEPRESSURE CLASS: CLASS 150MATERIAL, BODY: ASTM A216 GRADE WCBSIZE: 14 ININTERNAL COATEDSERVICE: SEA WATER Sea Water ValvesSize : 10 InchBody : ASTM A 216 Gr WCBBonnet (Bolted) : ASTM A 216 Gr WCBStem (Rising): Bronze (No Casting)Wedge Disc (Solid) : IS 318 Gr.2 Leaded Tin BronzeBody seat Ring (Renewable/ non renewable) : IS 318 Gr.2 Leaded Tin BronzeStem Packing (Renewable with valve open on stream) : Graphited asbestos with sacrificial inhibitor & Inconel Wire reinforcementHandwheels (Non rising ) : Malleable Iron, Cast Steel, Ductile IronBonnet Bolts : ASTM A 193 Gr B7Bonnet Nuts : ASTN A 194 Gr 2HBonnet Gasket : IS 2712 Gr A/0Back seat & Shoulder : BronzeFace to Face Distance as per ASME B16.10All other speicifications as per EIL Tag sheet : 51384 Internal Coating with GLASS FLAKE POLYSTER COATING: a. Surface preparation: Cu-slag blasting to SA 2 1/2 as per ISO 8501-1:2007 or SSPC-SP10 (min. surface profile of 50 micron). b. Supply and apply 2 Coats (each of 500 microns) of glass flake reinforced ambient cure polyester coating suitable for sea water application. Total DFT shall be 1000 microns. c. GLASS FLAKE POLYSTER coating material from M/s Kirloskar Brothers (product Corocoat-Polyglass HA) & M/s L & T (product Teroglass 60 CRC ) OR HPCL approved equivalent product from other reputed Manufacture meeting specifications mentioned in attached Spec sheet for internal lining of sea water valve material to be used. d. Area to be coated: Body, Bonnet internal & Disc of Valves; and components surface/s as per HPCL’s advice. For Quality Assurance, Tests like DFT & Spark Testing shall be carried out as per QAP. HT test Pressure (Body ) : 450 PSIHT test Pressure (Seat ) : 325 PSITest Pressure with Air : 80 PSIAgency to provide 2 sets of spare Bonnet gaskets along with Valve. Spare bonnet gaskets to be tied along with respective valve only. VALVE,GATE,FLANGEDFLANGE, FACING: FLAT FACEPRESSURE CLASS: CLASS 150MATERIAL, BODY: ASTM A216 GRADE WCBSIZE: 10 ININTERNAL COATEDSERVICE: SEA WATER Sea Water ValvesSize : 12 InchBody : ASTM A 216 Gr WCBBonnet (Bolted) : ASTM A 216 Gr WCBStem (Rising): Bronze (No Casting)Wedge Disc (Solid) : IS 318 Gr.2 Leaded Tin BronzeBody seat Ring (Renewable/ non renewable) : IS 318 Gr.2 Leaded Tin BronzeStem Packing (Renewable with valve open on stream) : Graphited asbestos with sacrificial inhibitor & Inconel Wire reinforcementHandwheels (Non rising ) : Malleable Iron, Cast Steel, Ductile IronBonnet Bolts : ASTM A 193 Gr B7Bonnet Nuts : ASTN A 194 Gr 2HBonnet Gasket : IS 2712 Gr A/0Back seat & Shoulder : BronzeFace to Face Distance as per ASME B16.10All other specifications as per EIL Tag sheet : 51384 Internal Coating with GLASS FLAKE POLYSTER COATING: a. Surface preparation: Cu-slag blasting to SA 2 1/2 as per ISO 8501-1:2007 or SSPC-SP10 (min. surface profile of 50 micron). b. Supply and apply 2 Coats (each of 500 microns) of glass flake reinforced ambient cure polyester coating suitable for sea water application. Total DFT shall be 1000 microns. c. GLASS FLAKE POLYSTER coating material from M/s Kirloskar Brothers (product Corocoat-Polyglass HA) & M/s L & T (product Teroglass 60 CRC ) OR HPCL approved equivalent product from other reputed Manufacture meeting specifications mentioned in attached Spec sheet for internal lining of sea water valve material to be used. d. Area to be coated: Body, Bonnet internal & Disc of Valves; and components surface/s as per HPCL’s advice. For Quality Assurance, Tests like DFT & Spark Testing shall be carried out as per QAP. HT test Pressure (Body ) : 450 PSIHT test Pressure (Seat ) : 325 PSITest Pressure with Air : 80 PSIAgency to provide 2 sets of spare Bonnet gaskets along with Valve. Spare bonnet gaskets to be tied along with respective valve only. VALVE,GATE,FLANGEDFLANGE, FACING: FLAT FACEPRESSURE CLASS: CLASS 150MATERIAL, BODY: ASTM A216 GRADE WCBSIZE: 12 ININTERNALLY COATED VALVE FOR SEA WATER SERVICE Sea Water ValvesSize : 18 InchBody : ASTM A 216 Gr WCBBonnet (Bolted) : ASTM A 216 Gr WCBStem (Rising): Bronze (No Casting)Wedge Disc (Solid) : IS 318 Gr.2 Leaded Tin BronzeBody seat Ring (Renewable/ non renewable) : IS 318 Gr.2 Leaded Tin BronzeStem Packing (Renewable with valve open on stream) : Graphited asbestos with sacrificial inhibitor & Inconel Wire reinforcementHandwheels (Non rising ) : Malleable Iron, Cast Steel, Ductile IronBonnet Bolts : ASTM A 193 Gr B7Bonnet Nuts : ASTN A 194 Gr 2HBonnet Gasket : IS 2712 Gr A/0Back seat & Shoulder : BronzeFace to Face Distance as per ASME B16.10All other specifications as per EIL Tag sheet : 51384 Internal Coating with GLASS FLAKE POLYSTER COATING: a. Surface preparation: Cu-slag blasting to SA 2 1/2 as per ISO 8501-1:2007 or SSPC-SP10 (min. surface profile of 50 micron). b. Supply and apply 2 Coats (each of 500 microns) of glass flake reinforced ambient cure polyester coating suitable for sea water application. Total DFT shall be 1000 microns. c. GLASS FLAKE POLYSTER coating material from M/s Kirloskar Brothers (product Corocoat-Polyglass HA) & M/s L & T (product Teroglass 60 CRC ) OR HPCL approved equivalent product from other reputed Manufacture meeting specifications mentioned in attached Spec sheet for internal lining of sea water valve material to be used. d. Area to be coated: Body, Bonnet internal & Disc of Valves; and components surface/s as per HPCL’s advice. For Quality Assurance, Tests like DFT & Spark Testing shall be carried out as per QAP. HT test Pressure (Body ) : 450 PSIHT test Pressure (Seat ) : 325 PSITest Pressure with Air : 80 PSIAgency to provide 2 sets of spare Bonnet gaskets along with Valve. Spare bonnet gaskets to be tied along with respective valve only. VALVE,GATE,FLANGEDFLANGE, FACING: FLAT FACEPRESSURE CLASS: CLASS 150MATERIAL, BODY: ASTM A216 GRADE WCBSIZE: 18 ININTERNALLY COATED VALVE FOR SEA WATER SERVICE Sea Water ValvesSize : 24 InchBody : ASTM A 216 Gr WCBBonnet (Bolted) : ASTM A 216 Gr WCBStem (Rising): Bronze (No Casting)Wedge Disc (Solid) : IS 318 Gr.2 Leaded Tin BronzeBody seat Ring (Renewable/ non renewable) : IS 318 Gr.2 Leaded Tin BronzeStem Packing (Renewable with valve open on stream) : Graphited asbestos with sacrificial inhibitor & Inconel Wire reinforcementHandwheels (Non rising ) : Malleable Iron, Cast Steel, Ductile IronBonnet Bolts : ASTM A 193 Gr B7Bonnet Nuts : ASTN A 194 Gr 2HBonnet Gasket : IS 2712 Gr A/0Back seat & Shoulder : BronzeFace to Face Distance as per ASME B16.10All other specifications as per EIL Tag sheet : 51384 Internal Coating with GLASS FLAKE POLYSTER COATING: a. Surface preparation: Cu-slag blasting to SA 2 1/2 as per ISO 8501-1:2007 or SSPC-SP10 (min. surface profile of 50 micron). b. Supply and apply 2 Coats (each of 500 microns) of glass flake reinforced ambient cure polyester coating suitable for sea water application. Total DFT shall be 1000 microns. c. GLASS FLAKE POLYSTER coating material from M/s Kirloskar Brothers (product Corocoat-Polyglass HA) & M/s L & T (product Teroglass 60 CRC ) OR HPCL approved equivalent product from other reputed Manufacture meeting specifications mentioned in attached Spec sheet for internal lining of sea water valve material to be used. d. Area to be coated: Body, Bonnet internal & Disc of Valves; and components surface/s as per HPCL’s advice. For Quality Assurance, Tests like DFT & Spark Testing shall be carried out as per QAP. HT test Pressure (Body ) : 450 PSIHT test Pressure (Seat ) : 325 PSITest Pressure with Air : 80 PSIAgency to provide 2 sets of spare Bonnet gaskets along with Valve. Spare bonnet gaskets to be tied along with respective valve only. VALVE,GATE,FLANGEDFLANGE, FACING: FLAT FACEPRESSURE CLASS: CLASS 150MATERIAL, BODY: ASTM A216 GRADE WCBSIZE: 24 ININTERNAL COATEDSERVICE: SEA WATER Total Quantity : 53
