Bids Are Invited For Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - Commercial; Medical Equipment and Devices; Service Provider - PPGI Wall and Ceiling Panel –50mm PPGI WALL AND CEILING PANEL: Supply of modular clean room 50mm thick Wall and ceiling panel made of both side PPGI material 0.5mm thickness, OFF White Colour, Tongue & Groove with infill of PUFF 40±2 Kg/m³ Density. Aluminum profiles for reinforceent along the periphery With aluminum grid with supporting system like, tie rod, turnbuckle etc., Hermatically Sealed Double Swing Door MOC : PCGI Door Size : 1500mm x 2100mm Supply of Double Door frame of 50mm width of 1.2mm thickness G.I. sheet & leaf of 40mm thickness made of 0.8mm G.I. sheet powder coated in RAL 9002 with honycomb pepecore/PUF infill fixed with polyeurathane glue with accessories , Coving Aluminium covings 50mm radius with male & female profiles to fixed from ceiling to wall panel wall to wall panel & Floor to Wall (Colour same as Partition & Ceiling Colour). , 3D Corner 3D Coving Corner, Supply, Fabrication, installation and testing GI DUCT Supply, Fabrication, installation and testing of Factory and Site Fabricated sheet metal ducts as per IS standard, in accordance with the approved shop drawings and as required by the specifications. Duct Hanging Arrangement fromCeiling coupler as per site. Ducting support with Wire support or Stud rod which is suitable at site and fixing arrangement with slab coupler., 24 gauge galvanised sheet steel, , Thermal insulation For Duct Thermal insulation material for Duct insulation shall be Closed Cell Cross linked polythylene (XLPE) Foram of desity 33 Kg/ m3 with 19 mm & 13 mm Thick & thermal Conductivity not exceeding 0.035 W/mK at an average Temperature of 40oC. The Material shall be rated as Class 1, . All Joints should be sealed with 3 mm thick 50 mm wide PE Tape and Flange to be overlaped by 6 width of the same material thickness. Cost of Insulation on Flanges/ Joints/ Wastage should be include in the cost, 13 mm thick insulation for return air ducts, Insulation shall be with aluminium foil is required., Diffuser Grill Supply & Installation of extruded 16G aluminum powder coated 4 way SA/RA Diffusers with volume control damper. Colour shall be decided by Client., Neck Size: 600 mm x 600 mm, DUCTABLE AC - 5.5 TR System Design Parameters : Temperature 20 +- 2°C & RH @ 55 +-5% Low RH for ensuring infection-free sterile environment in the OT Outdoor Unit (ODU): Microprocessor based air-cooled units with scroll compressors (Danfoss / Emerson) Power : 3 phase to minimize power consumption. Configuration : 36X40 FT ROOM - 3 Units. and 26 x 36 ft ROOM - 2 units Rectification scanner details should indicate healthy supply, High/low Voltage, Single phasing or voltage unbalanced, Reverence phase sequence., Clean room Lighting fixtures 605 X605 MM - 32 watt LED Light, Vinyle Flooring - Grade A 2 mm Vinyl Flooring with sidecoving in dual color shades - Conductive Grade A material Homogeneous , Electrification Electrification - The details of internal wiring, the position of fittings, fans, switches and plug sockets etc. are indicated in the layout drawings. The position of light fittings, fans, switch boards etc. indicated these drawings are only for the guidance of the supplier and the actual position of these shall be mutually decided between the supplier and the purchase, Installation, Civil Work & Transporation Installation, Transport & Other Work Description : Installation of all equipment’s, Loading and unloading of all equipment’s & material, All cable works required, Any other work if arising during execution of work, Fire System Sprinkler system and Smoke detectors as needed on the site Total Quantity :
