Supply Of Spares Along With Supervision, Erection, Installation And Commissioning Of Vibration Monitoring System For 6.6 Kv Boiler Side Auxiliaries Id, Fd, Pa And Mills For Unit 4 And 5, Btps, Anpara , For Id/Fd/Pa Fan A/B - Vibration System: - Sensor Mounting Bracket (L Type) Mild Steel Blackodized For Eddy Current Probes Tapped Hole: M10 Dimensions: Base Length: 100 Mm; Base Width: 50 Mm; Arm Height: 160 Mm (32 Nos. For Unit No.-04 And 32 Nos. For Unit No.-05 Of Btps, Anpara) , For Id/Fd/Pa Fan A/B - Vibration System: -Eddy Current Pickup 8 Mm Tip Dia, M10 Thread, 100 Mm Body Length, 40 Mm Threaded Length, Cable Length One Meter With Microdot Connector Reverse Mount(32 Nos. For Unit No.-04 And 32 Nos. For Unit No.-05 Of Btps, Anpara) , For Id/Fd/Pa Fan A/B - Vibration System: -Eddy Current Probe Driver, -24V Supply(32 Nos. For Unit No.-04 And 32 Nos. For Unit No.-05 Of Btps, Anpara) , For Id/Fd/Pa Fan A/B - Vibration System: -Eddy Current Probe Extension Cable 8 Meter For 9-Meter System Length(32 Nos. For Unit No.-04 And 32 Nos. For Unit No.-05 Of Btps, Anpara) , For Id/Fd/Pa Fan A/B - Vibration System: - Junction Box - Al Di-Cast Powder Coated, Ip65, (32 Nos. For Unit No.-04 And 32 Nos. For Unit No.-05 Of Btps, Anpara) , For Id/Fd/Pa Fan A/B - Vibration System: - 19” Api670 Compliant Rack, With Motherboard & Plug In Cards. Vibration Monitors Shall Be Mounted In Rack With Modular In Construction And Should Be Plugged In On The Mother Board Of Rack., Rack Cutout Size As Per Site Panel Space. [1 Nos. For Unit No.-04 And 01 Nos. For Unit No.-05 Of Btps, Anpara) (01 Considering 4 Nos. Of 8Ch Modules)] , For Id/Fd/Pa Fan A/B - Vibration System: - Relative Shaft Vibration Module, 4Ch/8Ch/16Ch Ecp Input And 2Ch/4Ch/8Ch Key Phasor Input, Api670 Compliant To Incorporate All Required Inputs, And Sufficient To Power Up Probe Drivers. Microcontroller Based & Configurable/ Programmable Via Front Panel (Through Push Button Or Usb/Rj45 Connection With Laptop Or Computer). With Display, Full Scale Measuring Unit, Sensor Sensitivity, Alarm And Trip Set Points. These Cards Must Be Hot Swappable. (Considering 8Ch Module) , For Id/Fd/Pa Fan A/B - Vibration System: -Fully Wired Cabinet/Panel, Size As Per Site Location Space, Ip32 , For Id/Fd/Pa Fan A/B - Vibration System: -Industrial Grade Dual Redundant Power Supply, As Per Api670 Compliant Connected With Rack Mother Board. The Power Supplies Should Be Capable Of Supplying Power For The Entire Monitoring System With Proper Regulated Supplies. 2 Nos. (Or More As Required) For Unit No.-04 And 2 Nos. (Or More As Required) For Unit No.-05 Of Btps, Anpara) , For Mill A/B/C/D/E/F/G/H - Vibration Systemsensor Mounting Bracket (L Type) Mild Steel Blackodized For Eddy Current Probes Tapped Hole: M10 Dimensions: Base Length: 100 Mm; Base Width: 50 Mm; Arm Height: 160 Mm (32 Nos. For Unit No.-04 And 32 Nos. For Unit No.-05 Of Btps, Anpara) , For Mill A/B/C/D/E/F/G/H - Vibration System: -Eddy Current Pickup 8 Mm Tip Dia, M10 Thread, 100 Mm Body Length, 40 Mm Threaded Length, Cable Length One Meter With Microdot Connector Reverse Mount(32 Nos. For Unit No.-04 And 32 Nos. For Unit No.-05 Of Btps, Anpara) , For Mill A/B/C/D/E/F/G/H - Vibration System: -Eddy Current Probe Driver, -24V Supply(32 Nos. For Unit No.-04 And 32 Nos. For Unit No.-05 Of Btps, Anpara) , For Mill A/B/C/D/E/F/G/H - Vibration System: -Eddy Current Probe Extension Cable 8 Meter For 9-Meter System Length(32 Nos. For Unit No.-04 And 32 Nos. For Unit No.-05 Of Btps, Anpara) , For Mill A/B/C/D/E/F/G/H - Vibration System: - Junction Box - Al Di-Cast Powder Coated, Ip65, (32 Nos. For Unit No.-04 And 32 Nos. For Unit No.-05 Of Btps, Anpara) , For Mill A/B/C/D/E/F/G/H - Vibration System: - 19” Api670 Compliant Rack, With Motherboard & Plug In Cards. Vibration Monitors Shall Be Mounted In Rack With Modular In Construction And Should Be Plugged In On The Mother Board Of Rack., Rack Cutout Size As Per Site Panel Space. [1 Nos. For Unit No.-04 And 01 Nos. For Unit No.-05 Of Btps, Anpara) (01 Considering 4 Nos. Of 8Ch Modules)] , For Mill A/B/C/D/E/F/G/H - Vibration System: - Relative Shaft Vibration Module, 4Ch/8Ch/16Ch Ecp Input And 2Ch/4Ch/8Ch Key Phasor Input, Api670 Compliant To Incorporate All Required Inputs, And Sufficient To Power Up Probe Drivers. Microcontroller Based & Configurable/ Programmable Via Front Panel (Through Push Button Or Usb/Rj45 Connection With Laptop Or Computer). With Display, Full Scale Measuring Unit, Sensor Sensitivity, Alarm And Trip Set Points. These Cards Must Be Hot Swappable. [4 Nos. For Unit No.-04 And 04 Nos. For Unit No.-05 Of Btps, Anpara) (Considering 8Ch Module) , For Mill A/B/C/D/E/F/G/H - Vibration System: -Fully Wired Cabinet/Panel, Size As Per Site Location Space, Ip32 , For Mill A/B/C/D/E/F/G/H - Vibration System: -Industrial Grade Dual Redundant Power Supply, As Per Api670 Compliant Connected With Rack Mother Board. The Power Supplies Should Be Capable Of Supplying Power For The Entire Monitoring System With Proper Regulated Supplies. 2 Nos. (Or More As Required) For Unit No.-04 And 2 Nos. (Or More As Required) For Unit No.-05 Of Btps, Anpara) , For Daq, Vibration Software And Computer:- Vibration Monitoring/ Recording/Analysis Software With Licence. (01 Setfor Unit No.-04 And 01 Set For Unit No.-05 Of Btps, Anpara) , For Daq, Vibration Software And Computer:- Workstation Computer Hp/Dell I5, 1Tb Hdd, 8 Gb Ram, Monitor, Keyboard, Mouse. (01 Setfor Unit No.-04 And 01 Set For Unit No.-05 Of Btps, Anpara) , For Daq, Vibration Software And Computer:-Cables, Connectors, And Other Misc. Items. (Lumpsum) (01 Setfor Unit No.-04 And 01 Set For Unit No.-05 Of Btps, Anpara) , For Daq, Vibration Software And Computer:-Complete Set Networking Hardware (Lumpsum) (01 Set For Unit No.-04 And 01 Set For Unit No.-05 Of Btps, Anpara) , For Erection, Installation And Commissioning (Services) Supervision, Erection, Installation, Commissioning And Testing (01 Job For Unit No.-04 And 01 Job For Unit No.-05 Of Btps, Anpara) , For Erection, Installation And Commissioning (Services) Cables, Glands, Terminations, Lugs Etc From Field To Panels And Control Room (As Per Site Requirement) (01 Job For Unit No.-04 And 01 Job For Unit No.-05 Of Btps, Anpara) , 10% Mandatory Spares For The Supplied Material, Minimum To 1 Qty. , Material :Bronze
