Tender For Providing, Supplying And Installing Of Below Mentioned Items - Designing, Providing, Supplying, Transportation, loading, Unloading, Installing, testing and commissioning of Main LT Feeder Panel completed in all respects as per the directions of Engineer Incharge. The panels used as main Source of Power for Pumps & Allied required areas. The detailed specifications and scope of work for the various components of the Panel to be provided must be as under. The rate must be inclusive of the charges for Designing, Providing, Supplying, Transportation, loading, Unloading, Installing, testing and commissioning of LT Main Panel. The panel shall be capable of Supplying the Panel shall be used to supply power for Pumps, Valve actuators, PLC panel & EOT Crane in the pump house. As per directed by Engineer-In charge. Feeder Shall be provided for 1. Pump set 150 HP-4 Nos. (2 Working 1 Standby) + 1 Spare 3. Valve actuators - 4 Nos. 2. EOT Crane 5 T Capacity 4. APFC Bank 5. Lighting & Power Sockets Minimum Requirements to be provided with panel Panel shall be inclusive of all required accessories like Power analyzer, Digital Voltmeter, Digital Ammeter, pushbutton, selector switch, Emergency pushbutton, lamp, buzzer, contactor, overload relay, Other relays, MCBs, Single Phase Protector, Space Heater, thermostat and auxiliary power socket with switch (16A), Astrotimer for external lighting & Panel Lights etc. as per requirement. Required Breakers in the Panel: Incorner ACB (630A)-1 Nos... Feeder for Pump set-4 No. (2 Working +1 Standby + 1 spare) Feeder for PLC Panel - TPMCB (As required)- 1 No. Feeder for Valve Actuator-TPMCB (As required) Feeder for EOT Crane(5T)-1 No. Feeder for APFC Panel Feeder for Lighting & Power DB-36 A-2Nos. (1 working + 1 Standby) Enclosure/Panel Body Specification Panel body shall be of IP 55 protection class. Panel body shall be treated with antirust treatment and duly powder coated or painted with one coat of red oxide lead paint and 2 coats of enamel paint completed size of 14 SWG. Sheet steel used for fabrication of these or similar items shall be cold roiled. All cubicles, panels, cabinets, kiosks, and boards shall comprise rigid welded structural frames made of pressed and formed sheet steel of not less than 3 mm thickness. The frames shall be enclosed by steel sheets of at least 2 mm thickness, smoothly finished, levelled and free from flaws. Stiffeners shall be provided wherever necessary. All doors, panels, removable covers, gland plates, etc., shall be gasketed all-round the perimeter. Padlocking facilities where required shall be provided in addition to above along with padlocks and duplicate keys. All doors shall be removable and supported by strong hinges of the disappearing or internal type and braced in such a manner as to ensure freedom from sagging, bending and general distortion of panel or hinged parts. Panel Shall be of bottom cable entry type.