Bids Are Invited For 1 Customisation and supply of Single Besheet Nos 800 Size: 72 Wx 109 Inches L+/- 2 inch Colour: White Texture: Plain Material: 100% Cotton Fabric should be of 300 TC Percale (+/-5%) as per ASTM D3775, Warp should be 60s Ne and Weft count should be 60s Ne. Tensile strength of warp and weft should be more than 30 LBS as per ASTM D5034, tearing strength should be more than 1.8 LBS as per ASTM D1424, rubbing fastness should be more than 3 as per ASTM D4970, Fabric GSM should be more than 115 as per ASTM D3776, Fabric shrinkage should be less than 4%, should be supported with test reports 2 Customisation and supply of Double Bedsheet Nos 150 Specifications for double bed sheet: Size: 96 Wx 102 Inches L+/- 2 inch Colour: White Texture: Plain Material: 100% Cotton Fabric should be of 300 TC Percale (+/-5%) as per ASTM D3775, Warp should be 60s Ne and Weft count should be 60s Ne. Tensile strength of warp and weft should be more than 30 LBS as per ASTM D5034, tearing strength should be more than 1.8 LBS as per ASTM D1424, rubbing fastness should be more than 3 as per ASTM D4970, Fabric GSM should be more than 115 as per ASTM D3776, Fabric shrinkage should be less than 4%, should be supported with test reports 3 Customisation and supply of Single duvet cover Nos 800 Specification of Duvet cover: 72 Inches x 95 Inches L White king bag type Duvet Cover with 10 inches flap: Colour: White Texture: 1 Cm Stripe Material: 100% Cotton Fabric should be of 300 TC Sateen Strpie (+/-5%) as per ASTM D3775, Warp and Weft count should be 60s Ne. tensile strength of warp and weft should be more than 30 LBS as per ASTM D5034, tearing strength should be more than 1.8 LBS as per ASTM D1424, rubbing fastness should be more than 3 as per ASTM D4970, Fabric GSM should be more than 115 as per ASTM D3776, Fabric shrinkage should be less than 4%, should be supported with test reports 4 Customisation and supply of Double duvet cover Nos 150 Specification of Duvet cover: 96 Inches x 90 Inches L White king bag type Duvet Cover with 10 inches flap: Colour: White Texture: 1 Cm Stripe Material: 100% Cotton Fabric should be of 300 TC Sateen Strpie (+/-5%) as per ASTM D3775, Warp and Weft count should be 60s Ne. tensile strength of warp and weft should be more than 30 LBS as per ASTM D5034, tearing strength should be more than 1.8 LBS as per ASTM D1424, rubbing fastness should be more than 3 as per ASTM D4970, Fabric GSM should be more than 115 as per ASTM D3776, Fabric shrinkage should be less than 4%, should be supported with test reports 5 Customisation and supply of single duvet Nos 350 Specification of Duvet: Supply of 70 x 92 Inches Duvet 200 GSM, Filling material: Polymicrofiber filling, 200 TC 100% Cotton/Micropeach Fabric 6 Customisation and supply of double duvet Nos 60 Specification of Duvet: Supply of 93 x 87 Inches Duvet 200 GSM, Filling material: Polymicrofiber filling, 200 TC 100% Cotton/Micropeach Fabric 7 Customisation and supply of single mattress protector Nos 850 Specification of mattress Protector: Supply of 43 x 79 Inches Duvet 150 GSM, Filling material: 150gsm Polyfill, 60% Cotton 40% Poly 200TC Percale, 4cm AB sewn, 44 cm from each corner, 1.5 single needle self - binding edge, Diamond quilted 3 x 3, White 8 Customisation and supply of single mattress protector Nos 100 Specification of mattress Protector: Supply of 68 x 76 Inches Duvet, Filling material: 150gsm Polyfill, 60% Cotton 40% Poly 200TC Percale, 4cm AB sewn, 44 cm from each corner, 1.5 single needle self - binding edge, Diamond quilted 3 x 3, White 9 Customisation and supply of Hand Towel Nos 864 Specification of Hand Towel: Size: 41 W x 76 Cm L White Hand Towel: Colour: White Texture: Plain Material: 100% Cotton Weight: 550 grams per square meter+/-5% Product Weight: 170 Grams+/-5% Towel should be of 550 GSM(+/-5%), EPI should be 65 (+/-5%), PPI should be 45 (+/-5%), Warp Pile count should be 2 Ply 20s Ne Combed Carded, Warp ground count should be 1 ply 10s Ne Combed carded. Weft count should be 1 Ply 12s Ne Open ended, Fabric shrinkage should be less than 8% length wise and less than 5% width wise, Tensile strength of warp and weft should be more than 30 LBS as per ASTM D5034 Absorbancy should be 1- 2 Sec as per AATCC 79, should be supported with test reports 10 Customisation and supply of Bath Towel Nos 848 Specification of Bath Towel: Size: 76 W x 152 Cm L White Bath Towel Colour: White Texture: Plain Material: 100% Cotton Weight: 630 grams per square meter +/-5% Product Weight: 725 Grams+/-5% Towel should be of 630 GSM(+/-5%), EPI should be 65 (+/-5%) , PPI should be 45 (+/-5%), Warp Pile count should be 2 Ply 20s Ne Combed Carded, Warp ground count should be 1 ply 10s Ne Combed carded. Weft count should be 1 Ply 12s Ne Open ended, Fabric shrinkage should be less than 8% length wise and less than 5% width wise Tensile strength of warp and weft should be more than 30 LBS as per ASTM D5034, Absorbancy should be 1-2 Sec as per AATCC 79, should be supported with test reports 11 Customisation and supply of Pillow: Nos 350 Specification of Pillow: Size: 16x25 Inches 750 Grams Microfiber, Micropeach fabric 12 Customisation and supply of Pillow Cover Nos 500 Specification for Pillow covers: Size: 17Wx 26 Inch L +/- 1 inch, 1 Inch flange required, 4.5 Inches Flap Colour: White Texture: 1 cm Stripe Material: 100% Cotton Fabric should be of 300 TC Percale (+/-5%) as per ASTM D3775, Warp should be 60s Ne and Weft count should be 60s Ne. Tensile strength of warp and weft should be more than 30 LBS as per ASTM D5034, tearing strength should be more than 1.8 LBS as per ASTM D1424, rubbing fastness should be more than 3 as per ASTM D4970, Fabric GSM should be more than 115 as per ASTM D3776, Fabric shrinkage should be less than 4%, should be supported with test reports 13 Customisation and Supply of Pillow Protector: Nos 500 Specification of Pillow Protector: Size: 16x25 Inches Quilted Waterproof with Zip 14 Customisation and Supply of Bath Mat Total Quantity : 8155
