Tender For Procurement Of Ppe For Cmsru, mumbai-Maharashtra

Tender For Procurement Of Ppe For Cmsru; Officers and Supervisors and Employees Style : Cotton coverall with logo and name badge (ISO 13688) Measurement : as Asian size Fabric : 100% cotton 3/1 drill 220gsm (Item should be IS 177 : 1989, certificate of the same to provide during supply) Colour: White Band : 3M 8912 Reflective tape 50mm (EN 20471 standard, Item should be IS 15809 (2008), certificate to be provided) Zip: No.5 metal zipper in pocket and front closing (YKK brand or equivalent and should be IS 3148(1991)) Velcro: High Quality Design : The below design only used for basic understanding. Details of the other requirements are given below and refer existing sample also for better clarity. 1. Collar and main open zipper closed with invisible brass snap button 3 nos – high quality 2. CUF with two adjustable brass snap button hidden 3. Collar loop, 2 side shoulder walkie talkie loop, Gas meter loop (right side) and knee toruch pocket with snap button. 4. CSL logo to be done with screen printing at back side. (size of the back logo to be reduced from the sample of CSL). Embroidery on the front pocket. 5. Two back pockets have one with closed flap and one without flap. 6. Name to be stitched on a cloth and same to be fixed via high quality Velcro. 3 nos stitched name tag shall be supplied along with the bulk supply. Quote for the future requirements each stitched tag will be quote separately. This shall be supplied with short notice(within a week) 7. Knee guard for superior protection by additional strengthening. (eg sample pad or provision of keeping pad or cross stitched) - Sample coverall to be suppled and advantages shall be briefed 8. Transparent ID card folder to be included on the front side on the front pocket. 9. Snap buttons to be fitted with backpad and fixed with correct pressure. 10. Small, medium, large, extra-large are the different sizes of the coveralls. Double extra-large sizes will be finalized after the actual measurements at CSL. TECHNICAL SPECIFICATION - CATEGORY -I Coverall for Permanent Workmen – MALE  Fabric: 100% cotton 3/1 drill 220 gsm - allowable shrinkage is 3 % (Item should be IS 177 : 1989, certificate of the same to provide during supply)  Style: Cotton coverall with CSL logo and name badge  Measurement: as Asian size  Colour: Grey (pantone code) - 17-1501 TCX (WILD DOVE)  Band: 50mm Reflective Tape Grey colour [3M 8912 or equivalent (EN20471 standard) Item should be IS 15809 (2008), certificate to be provided)]  Zip: No.5 plastic zipper (YKK – VISLON ® Standard brand or equivalent should be IS 3148(1991))  Velcro: High quality  Collar and main open zipper closed with invisible brass snap button 3 nos – high quality.  CUF with two adjustable brass snap button hidden.  1 Collar loop, 2 side shoulder walkie-talkie loop and one Gas meter loop (right side)  CSL logo to be screen printed (21 cm Diameter) at back side and (9 cm diameter) on the front pocket (Left side).  Two front pockets of covered zip openings with sufficient to put mobile and pocket books  Two back pockets have one with closed flap and one without flap.  One cargo pocket at mid right leg area and two slash side pockets  One Shoulder pocket for holding two pen on the left hand side  Name and blood group to be stitched on a cloth pad and same to be fixed on high quality Velcro. 3 nos stitched name and blood group tag shall be supplied along with the bulk supply. Velcro in GREEN - Pantone 18-6330 colour border to be stitched above the left front pocket.  Knee guard for superior protection by additional strengthening. (e.g. looking for sample pad or provision of keeping pad or cross stitched)  Snap buttons to be fitted with back-pad and fixed with correct pressure.  Extra small, small, medium, large, extra-large are the different sizes of the coveralls. Double extra-large sizes will be finalized after the actual measurements at CSL.

Refer document

Refer document

Refer document